The extent of undiagnosed gestational diabetes mellitus in New South Wales

Rapid, accurate seating of screw-retained implant abutment heads, where timing is controlled by internal or external hex designs, can be readily accomplished with individual, custom-cast abutment head location devices. The devices are especially useful when the abutment head-implant body complex is to be permanently cemented. The use and design of abutment seating jigs for single tooth implants and completely implant or implant and natural tooth-supported prostheses are described.     

Fabricating abutment crowns for existing removable partial dentures using custom resin clasp analogs

A universal approach for fabricating abutment crowns for existing removable partial dentures is described. A replica (analog) of the clasp assembly is generated and transferred to a traditional working cast, which includes the abutment die. The analog is incorporated into the working cast as a removable component to allow the formation of the crown contours. The article reviews in detail the procedures required to transfer accurately all the essential components and information from the mouth to the working cast while allowing the patient uninterrupted use of the removable partial denture. Prestabilizing the removable partial denture, creating the analog impression, avoiding errors due to soft tissue components, forming a precise analog base, selecting materials, generating a rigid resin analog, and prescribing a path of insertion and withdrawal to the analog are described. The method replicates all types of clasps and can generate all types of fixed prosthodontic retainers to function harmoniously with the existing partial denture.     

Repair with a surveyed cast clasp while patient retains the partial denture

A technique is described that allows a removable partial denture with a broken clasp or a removable partial denture in which an abutment has been extracted to be restored by the reattachment of a new cast clasp component or a complete surveyed clasp assembly. The technique is applicable to most clasp designs and can include attachment to the acrylic denture base or the metal major connector. The technique is distinguished from other repair techniques by (1) providing a cast clasp replacement, (2) allowing the patient to retain the prosthesis during the repair, (3) generating a precisely formed surveyed clasp assembly by the laboratory, and (4) including an efficient transfer mechanism for the precision clasp created in the laboratory to be attached to the removable partial denture in the dental office. A two-step impression procedure is used to ensure proper relation of the partial denture to the abutments.     

The extracted tooth pontic--provisional replacement during bone graft and implant healing

When tooth extraction is required, a provisional restoration may be utilized as an interim prosthesis during bone graft and implant healing. The selection of provisional replacement of the anterior teeth following extraction may have a direct influence on the success of the definitive tooth replacement. This article describes a technique for using the extracted tooth or a denture tooth as an interim prosthesis during bone graft and implant healing. This method of provisionalization offers several advantages, including no adjacent tooth preparation, natural appearance, and retention of the papillae.     

Human herpesvirus-6 infection in liver transplant recipients: documentation of pathogenicity

In the posterior partially edentulous jaw, implants may be used to supplement existing natural dentition. Frequently, the maxillary sinuses and the mandibular nerve preclude the fabrication of freestanding implant-retained prostheses. However, if an implant and a natural abutment are combined, a fixed prosthesis can be fabricated, restoring the arch into the premolar area. The histories of three patients with attachments connecting implant-retained ceramotitanium crowns with crowns on natural abutments are described. A design for a rigid custom-made attachment for the Br?nemark system, using standard components with a machine-duplication, spark-erosion technique, is suggested.     

Stress analysis of a cantilevered fixed partial denture with normal and reduced bone support

A two-dimensional finite element model was constructed to analyze the simulated mechanical behavior of a cantilevered fixed partial denture. The variations of the models were made by altering the degree of bone support, the number of splinted abutments, and the length of the pontics. High stress concentrations were observed around the connectors of the fixed prosthesis and the tooth closest to the cantilever. Reduced bone support increased the deflection and stress concentrations. There was reduction in displacement and stress concentration when the teeth were splinted together. To improve the prognosis of the fixed partial denture cantilever, the number of abutments should be increased and the number of pontics decreased.     

Patients with epilepsy who die suddenly have cardiac disease

This paper describes the design and fabrication of a soft liner-retained, implant-supported overdenture used in 10 patients over a period of 1 to 6 years. A final complete denture impression is made of the dental arch, including implant abutments extending 5 mm above the gingival tissue. The master cast is fabricated with actual abutments placed in the impression. After the final wax try-in, the denture is flasked in the usual manner with the metal abutments in place. Before packing with acrylic resin, plastic tubing 1 to 2 mm thick is placed around each abutment. The denture is trial packed and allowed to bench cure over night. The plastic tubing is then removed and a soft denture lining material is placed in these areas only. The flask is closed and cured according to the manufacturer's recommendation. The denture is delivered as a conventional overdenture.     

The custom implant impression coping: technical note

Unsupported soft tissue can collapse around a submerged implant or abutment head during the time interval between removal of the provisional prosthesis and placement of the impression material. A technique is described for accurately recording the implant or abutment position as well as the position of the soft tissue for a single tooth restoration using the provisional prosthesis as a custom implant impression coping.     

Biomechanical considerations when combining tooth-supported and implant-supported prostheses

The force distribution of multiple tooth-supported and implant-supported prostheses is completely different. A direct correlation exists between the degree of flexion at the site of loading and the amount of force distribution to other members of the prosthesis. Micromovement produced by the periodontal fibers facilitates force distribution to all the root surfaces of the natural tooth abutments. The rigidity of the implant/abutment/prosthesis configuration concentrates the force at the crestal bone at the site of loading with limited distribution to the remaining implants. Differential mobility concentrates the force distribution to the bone support of the most rigid members of splinted natural teeth or to the implants when they are united with natural teeth in a combined prosthesis. Implants always support the natural teeth and never the other way around. Therefore a nonrigid attachment is recommended between a tooth-supported prosthesis and an implant-supported prosthesis when they are combined. However, when implants are interspersed with natural teeth in the same prosthesis, the restoration will be implant borne. This requires special force distribution analysis to prevent implant overload.     

Use of X-ray diffraction for studying the temperature dependence of the Young modulus of protein crystals

Conventionally, for dental reconstruction after bone grafting of the congenital residual alveolar cleft, a fixed prosthesis or removable partial denture is used. In this paper, residual alveolar cleft reconstruction with an osseointegrated implant following secondary bone grafting is described. The patient underwent secondary bone grafting of the residual alveolar cleft at the age of 18 years. One osseointegrated implant was placed in the bone bridge 8 months after bone grafting. No problems up to 1 year after the fabrication and placement of the fixed prosthesis have been observed.     

A modified occlusal registration and implant transfer technique

The technique for the transfer of implant and abutment position to a working cast has been hindered by multiple transfers and record reproductions. These serve only to delay completion of the patient's prosthetic requirements. A transfer technique that uses custom impression trays fabricated from surgical templates allows for a single-visit transfer of centric occlusion, vertical dimension, tooth position, and implant or abutment location in one procedure. This streamlines treatment and allows for quicker delivery of final prostheses.     

The Orthosystem--a new implant system for orthodontic anchorage in the palate

The present report describes the design and first clinical experiences of a newly developed endosseous orthodontic implant anchor system (Orthosystem, Institut Straumann, Waldenburg, Switzerland) for palatal anchorage. The 1-piece fixture made of titanium consists of a screw-type endosseous implant body (sandblasted, acid-etched, diameter 3.3 mm, lengths: 4 and 6 mm), a cylindrical polished transmucosal neck and an abutment. Clamp-caps provide attachment of square commercially available orthodontic wires (0.032 x 0.032 inch, SS) to the abutment (transpalatal bars). In a pilot study 1 fixture (implant body length: 6 mm) was inserted into the midsagittal anterior palatal region in each of 6 adult patients with Angle class II malocclusion (distocclusion 7 to 8 mm, overjet: approximately 9 mm). The treatment plan included extraction of the first maxillary premolars and retraction of the anterior teeth based on maximum anchorage of the posterior teeth without using compliance-dependent anchorage aids (headgear, class II elastics). Due to the design of the fixture only 1 simple surgical procedure was required for insertion (nonsubmerged method, 1-stage surgery). Accordingly the need for surgical exposure of the abutment for connection and wire insertion was eliminated. Thus, inconvenience to patients was reduced to a minimum. The patients are now at varying active treatment stages. The course of treatment of the most advanced case is described. Evaluation of the clinical and radiological findings after 12 months of treatment (3 months implant healing, 9 months active orthodontic treatment which is equal to the implant loading period) revealed no implant mobility/dislocation, favourable peri-implant soft tissue conditions, no marked mesial movement (approximately 0.5 mm) of the implant/transpalatal bar supported posterior teeth, and 8 mm retraction of the anterior teeth. Retrieval of the fixture and post-operative wound healing were uncomplicated. In the treatment of this case, no compliance-dependent extraoral anchorage was used, and the well aligned mandibular dentition was not bonded provide anchorage support (class II elastics).     

Superficial hemangiomas: associations and management

A new design of single tooth implant (AstraTech, Molndal Sweden) featuring a microthreaded conical neck and TiO blast surface was evaluated clinically and radiographically after 2 years in function. Fifteen patients (age range 16 to 48) with missing maxillary anterior teeth (6 central incisors, 8 laterals, 1 bicuspid) had 4, 13 mm and 11, 15 mm implants placed under local anaesthesia and left for a period of 6 months before exposure and abutment connection/crown fabrication. All patients were seen at 4 to 6 monthly intervals for hygienist maintenance. Radiographs using Rinn holders and a long cone technique were taken at the crown insertion and after 1 year (14 subjects) and 2 years (12 subjects). All implants were successfully integrated at stage 2, and no implants have been lost. The internal conical seal design of the abutment/implant interface facilitated connection and there were no cases of abutment screw loosening. No soft tissue problems were observed, and the gingival morphology/health was well maintained. One crown was recemented after 18 months in function, and 1 crown was replaced because of a fracture to the porcelain incisal edge. At crown insertion, the mean bone level was 0.46 to 0.48 mm apical to the top of the implant and there were no statistically significant changes in the bone level over the 2 years of the study. In conclusion, the single tooth Astra implants were highly successful and bone changes within the first 2 years of function were comparable with other systems reporting high long-term success rates.     

Interaction effects among cortical bone, cancellous bone, and periodontal membrane of natural teeth and implants

Following the initial successes of Goldberg and Gershkoff (Dental Digest, 5, 11, 1947) with the placement of subperiosteal implants, interest in all types of implants emerged. As an aid to the evaluation of various designs and materials without resorting to clinical testing, finite element analyses are being conducted by a number of researchers to determine the stress system induced in bone. The present study investigates the effects of variation in the thicknesses of the periodontal membrane and cortical bone and of the model boundary on the stresses developed around a natural tooth or a tooth-shaped implant. The results show that strong effects due to the variation in these parameters can be expected. As a consequence, the problem of the analysis of any single implant must consider additional factors. These can influence overall implant design and may eventually help to explain what could appear as anomalies in clinical test results.     

Single implant restorations: prosthetically induced soft tissue topography

An aesthetic transition from the smaller diameter of the implant to the prosthetic restoration that resembles the size of the natural tooth has presented an ongoing challenge to the implant restorative dentists. The appearance of the surrounding soft tissue is of major importance, and various techniques have been developed to guide and optimize its topography. The learning objective of this article is to present a cervical contouring concept, whereby the soft tissue topography is optimally determined already in the laboratory phase. Using a custom abutment and provisional crown as components of the transmucosal prosthetic unit (TPU), the topography is transferred to the vital intraoral tissues, which predictably adapt to the enhanced aesthetic configuration. Clinical cases are presented to demonstrate the sequence of the technique in treating the anterior region of the maxilla.     

Peroperative manometric evaluation of posterior fundoplication by celioscopy

A severe allergic reaction to a porcelain-fused-to-metal fixed partial denture containing 79% palladium, 2% gold, and 19% copper, resulting in a variety of symptoms and hospitalization of the patient, is reported. The reaction occurred 4 hours after cementation of the fixed partial denture. Suggestions for use of nongold metal alloys are discussed.     

Swing-lock design considerations for obturator frameworks

The conventional and swing-lock (S/L) obturator prostheses can be highly effective in restoring maxillary defects when careful attention is paid to the principles of framework design. Although the S/L modality has been available since the mid 1960s, its use in maxillofacial prosthetics has been limited, and little information is available in the literature to guide the practitioner. This modality offers a conservative design option that lies somewhere between the conventionally designed obturator prosthesis and the prosthesis designed to use extensive fixed reconstruction or endosseous implants. When the S/L obturator is considered, single, double, or dual labial bar designs are possible and may be required by the length and complexities of the arc of closure. Such designs provide a flexible labial bar that transmits less stress to abutment teeth. This article reviewed conventional obturator framework designs and compared them with S/L designs for similar patient categories.     

Load transmission in implant superstructures supported by natural teeth and osseointegrated dental implants. A preliminary report

There is considerable debate as to the effects of using bridges which are supported simultaneously by teeth and implants, due to the marked differences in their displaceability. This in-vivo experiment was carried out on three subjects, and measured the vertical and horizontal movement of implants and teeth, linked with a fixed superstructure, when this was loaded. The results suggest that natural abutment teeth may contribute significantly to bridge support in these circumstances.     

Follow up and maintenance of implant supported prostheses: a comparison of 20 complete mandibular overdentures and 20 complete mandibular fixed cantilever prostheses

Two independently selected groups of 20 patients who were edentulous in te mandible, were followed up on a regular basis over a 5-year period following restoration with a lower implant stabilised prosthesis and conventional upper denture. Significantly more treatment was required by those who received complete mandibular overdentures than those provided with complete fixed mandibular prostheses. In addition to adjustment for the relief of denture trauma to the mucosa, more mechanical problems arose with overdenture implant prostheses.     

Guided tissue regeneration using bioresorbable membranes: what is the limit in the treatment of combined periapical and marginal lesions?

The maintenance of single teeth may often be of crucial importance for the prognosis of the total dentition. In such cases, as when a single tooth supports a fixed partial denture, a special effort should be made to maintain that tooth. This study reports the treatment of six such terminal cases. The results of a combination of local and systemic antibiotics and the use of guided tissue regeneration with resorbable membranes and grafting material is demonstrated. After defect debridement and root planing, the defects were filled with Biostite (Coletica), and Paroguide (Coletica) membranes were placed. The results at reentry demonstrated the efficacy of these treatments, and all six treatments were considered successful. The influence of the individual components used in treatment is discussed.