用于微片激光器的Nd3+掺杂四磷酸盐玻璃光谱研究

制备了Nd+掺杂四磷酸盐玻璃,测量了吸收光谱、荧光光谱,计算Nd十的发射截面,研究了其荧光特性、浓度猝灭及其机制、以及OH基对荧光强度和能量传递的影响,研究发现在四磷酸盐玻璃Nd3+的最佳浓度约为4.1×1020ions/cm3,在研究光谱性质的基础上实现了Nd3+掺杂四磷酸盐玻璃微片激光器1.054μm的连续激光输出.     

Nd:Gd_xY_(1-x)Ca_4O(BO_3)_3晶体的生长及其光谱性能研究

利用熔体提拉法生长了大尺寸,高质量的新型激光自信频晶体Ｎｄ：ＧｄｘＹ１－ｘＣａ４Ｏ（ＢＯ３）３简称Ｎｄ：ＧｄＹＣＯＢ）．对Ｎｄ：ＧｄＹＣＯＢ晶体的ＸＲＤ衍射图进行指标化,得到它的晶胞参数为α＝８．０８０Ａ; ｂ＝１６．０１６Ａ; ｃ＝３．５３８Ａ; β＝１０１．１８°;μ＝４９１．１Ａ３．对取自不同部位的晶体粉末进行ＩＣＰ原子发射光谱分析表明晶体整体组份均匀一致,根据熔体和晶体粉末的ＩＣＰ数据计算,Ｎｄ：ＧｄＹＣＯＢ晶体中Ｎｄ３＋的分凝系数为０．６３．首次报道了 Ｎｄ：ＧｄＹＣＯＢ晶体２００～３０００ｎｍ室温透过光谱和室温荧光光谱及荧光寿命．室温透过光谱表明Ｎｄ：ＧｄＹＣＯＢ晶体的紫外吸收边在～２２０ｎｍ,具有很宽的透光波段（～２２０～２７００ｎｍ）; Ｎｄ：ＧｄＹＣＯＢ晶体在８００ｎｍ附近存在很强的吸收,适合于ＬＤ泵浦．荧光光谱表明Ｎｄ：ＧｄＹＣＯＢ晶体是一种很有潜力的ＲＧＢ（ｒｅｄ;ｇｒｅｅｎ, ｂｌｕｅ）激光自信频晶体．掺杂 ４％、 ５％ Ｎｄ：ＧｄＹＣＯＢ晶体的荧光寿命分别为 １０５μｓ和１００μｓ．     

二磷酸钕钾晶体的生长与光谱

Ｋ３Ｎｄ（ＰＯ４）２晶体是一种高稀土浓度的激光晶体．本文报道从ＫＦ－ＫＣｌ体系中采用助熔剂法培养出Ｋ３Ｎｄ（ＰＯ４）２晶体．该晶体呈淡紫红色，属单斜晶系，Ｐ２_１／ｍ空间群，晶胞参数为ａ＝９．５３４　，ｂ＝５．６２９　，ｃ＝７．４４３　，β＝９０．９６°．测定了晶体室温下的吸收光谱、荧光光谱、激发光谱和红外光谱．     

掺Pr^3＋硫（卤）系玻璃1.3μm光纤放大器

介绍了稀土掺杂光纤放大器的发展，总结了用于１．３μｍ光纤放大器的几种重要的硫系统质玻璃，阐述了接Ｐｒ＾３＋硫（卤）系玻璃１．３μｍ光纤放大器的光学性质并分析了－ＯＨ等杂质对其性能的影响。     

加入敏化离子C_r~（3＋）的RE：YAG晶体中能量转移

测量了Ｃｒ３＋和ＲＥ３＋（Ｔｍ３＋，Ｈｏ３＋，Ｎｄ３＋）共掺的ＹＡＧ晶体的吸收谱、荧光谱和Ｃｒ３＋的荧光衰减曲线．计算了Ｃｒ３＋向ＲＥ３＋能量转移的效率和速率．它是依Ｈｏ３＋、Ｎｄ３＋，Ｔｍ３＋递增的，提出比较能量转移效率大小的简便方法．     

不同铒离子掺杂浓度下碲酸盐玻璃荧光特性研究

测试了掺铒碲酸盐玻璃的荧光特性，研究了。^4I13／2能级上Er^3＋离子的荧光谱、荧光强度和荧光寿命．研究显示，掺铒碲酸盐玻璃中存在着强烈的荧光俘获效应和浓度猝灭效应．荧光俘获效应使得荧光谱中的各谱线成分相对强度随着Er^3＋离子掺杂浓度的增加发生改变，从而导致荧光谱主峰的变迁和荧光谱的展宽．Er^3＋离子间的协作上转换引起的能量转移，使得荧光强度在较高掺杂浓度下发生猝灭．同时，荧光俘获效应和浓度猝灭效应的相互作用，导致荧光寿命随着Er^3＋离子掺杂浓度的增加呈现出先增大后减小的变化趋势．     

PbO－Bi_2O_3－B_2O_3－SiO_2系重金属氧化物玻璃的结构与光学性

通过密度、可见光光谱、红外吸收光谱、Ｃｏ－６０辐照损伤试验及荧光光谱的测试，研究了ＰｂＯ－Ｂｉ２Ｏ３－Ｂ２Ｏ３－ＳｉＯ２玻璃系的光学性能与结构．密度最高可达８．４６４ｇ／ｃｍ３其紫外吸收达截止波长随Ｐｂ２＋及Ｂｉ３＋含量升高而红移．玻璃熔化温度低达８５０℃．在ＰｂＯ－Ｂｉ２Ｏ３－Ｂ２Ｏ３系玻璃中加人ＳｉＯ２可使玻璃结构更致密．室温下该系统玻璃在３６０ｎｍ有一个宽的激发峰，能产生４１８ｕｍ及４３８ｕｍ两个弱的发射峰．该系统玻璃的结构是由［ＳｉＯ４］４－、［ＢＯ３］３－、［ＢＯ４］５－、［ＰｂＯ４］６－及［ＢｉＯ６］９－构成．其中部分Ｐｂ２＋及Ｂｉ３＋以网络外体进入玻璃．     

PbO—Bi2O3—B2O3—SiO2l系重金属氧化物玻璃的结构与光学性能

通过密度，可见光光谱，红外吸收光谱，Ｃｏ－６０辐照损伤试验及荧光光谱的测试，研究了ＰｂＯ－Ｂｉ２Ｏ３－Ｂ２Ｏ３－ＳｉＯ２玻璃系的光学性能与结构。密度最高可达８．４６４ｇ／ｃｍ＾３，其紫外吸收边截止波长随Ｐｂ＾２＋及Ｂｉ＾３＋含量升高而红移。     

P2O3—B2O3—Al2O3—SrO—BaO玻璃中的Yb^3＋非辐射能量转移下E …

本文研究了共掺Ｅｒ＾３＋／Ｙｂ＾３Ｐ２Ｏ３－Ｂ２Ｏ３－Ａｌ２Ｏ３－ＳｒＯ－ＢａＯ玻璃的能量转移过程。实验中制备了高掺杂Ｂｂ＾３＋离子的双掺Ｅｒ＾＃＋／Ｙｂ＆＾３＋的磷酸盐玻璃样品。在Ｅｒ＾３＋／Ｙｂ＾３＋掺杂比率〉１：１８（ｍｏｌ％）时,观测到了基于Ｙｂ＾３＋离子至Ｅｒ＾３＋离子能量转移下Ｅｒ＾３＋（＾３Ｉ１３／２→＾４Ｉ１５／２）的增强发射和ｂ＾３＋（＾２Ｆ７１／→＾２Ｆ５／２）发射的减弱,当Ｂ     

Y^3＋掺杂TiO2复合粒子的光催化活性研究

以钛酸丁酯和氧化钇为原料,采用溶胶－凝胶法研究了Ｙ＾３＋掺杂对ＴｉＯ２光催化活性的影响,通过红外光谱（ＩＲ）分析了ＴｉＯ２复合粒子的结构,结果表明：Ｙ＾３＋掺杂能够显著提高ＴｉＯ２粒子的光催化活性,当掺杂比为１００∶１．５（Ｙ＾３＋外加１．５％）时光催化活性最高,分析了Ｙ＾３＋掺杂ＴｉＯ２粒子光催化活性提高的原因。     

Insertion of triangulated surfaces into a meccano tetrahedral discretization by means of mesh refinement and optimization procedures

In this paper, we present a new method for inserting several triangulated surfaces into an existing tetrahedral mesh generated by the meccano method. The result is a conformal mesh where each inserted surface is approximated by a set of faces of the final tetrahedral mesh. First, the tetrahedral mesh is refined around the inserted surfaces to capture their geometric features. Second, each immersed surface is approximated by a set of faces from the tetrahedral mesh. Third, following a novel approach, the nodes of the approximated surfaces are mapped to the corresponding immersed surface. Fourth, we untangle and smooth the mesh by optimizing a regularized shape distortion measure for tetrahedral elements in which we move all the nodes of the mesh, restricting the movement of the edge and surface nodes along the corresponding entity they belong to. The refining process allows approximating the immersed surface for any initial meccano tetrahedral mesh. Moreover, the proposed projection method avoids computational expensive geometric projections. Finally, the applied simultaneous untangling and smoothing process delivers a high‐quality mesh and ensures that the immersed surfaces are interpolated. Several examples are presented to assess the properties of the proposed method.     

Certification Institutions Expected to Update and Transfer Information on Present Standards

Standards are the basis for production enterprises to organize production, ex-factory inspection, trade (delivery) and technical exchanges, product certification, quality arbitration and supervision.……     

Flow calorimeter for enthalpy increment measurements on condensed gases

A flow calorimeter for enthalpy increment measurements on condensed gases is presented. A better knowledge of the properties of the liquefied natural gas is needed, and therefore a liquid loop has been designed for our flow calorimeter. The fluid loop in the calorimeter is designed in order to avoid the two-phase region, since two phases would give compositional disturbances in the measurements. The avoidance of the two-phase region is made possible by increasing the pressure of the test fluid after the measurement section, then heating the fluid at super-critical pressure past the critical point. Finally, the fluid is throttled to the low-pressure gas state at the inlet condition of the compressor that circulates the fluid. To perform the pressure increase, a new cryogenic pump has been designed. To evaluate the new equipment, measurements were taken on liquid ethane over the temperature range 146–256 K at pressure between 0.9 and 5.1 MPa.     

From Industry 4.0 to Research 4.0. Development of High Performance Fibers in the Light of Digitization

We associate a variety of innovations with the term ＂Industry 4.0＂. The pioneer of many 4.0 modifications forms the basisfor the trend towards the integrated di...     

Refrigerators Enter a New Era of Health Preservation Frestech initiates the establishment of China's first standard for household sterilization refrigerators

On November 30, 2007, the China Association for Standardization (CAS) held a press conference at Beijing Diaoyutai State Guest House. Leaders from the China Household Electric Appliance Research Institute, the China Household Electric Appliance Association, and the China Consumers' Association attended and made speeches.……     

Optimum-Simulation von Ernteprozessen

Zusammenfassung Bei der Gestaltung von Ernteprozessen — beispielsweise des Prozesses Mähdrusch, Körnertransport und -abnahme — als transportverbundene Fließarbeitsverfahren mit mindestens zwei verschiedenen Arbeitsmitteln gibt es einen großen Optimierungsspielraum. Solche Prozesse sind mehrstufige Bedienungsprozesse mit gemischter Anordnung der Bedienungseinrichtungen. Außerdem besitzen sie stark ausgeprägte räumliche Aspekte. Es wird vor allem gezeigt, welche Merkmale solcher Prozesse in Simulationsmodellen abgebildet sein müssen, welche Zielgrößen in Abhängigkeit von welchen Einflußgrößen unter Berücksichtigung welcher Prozeßbedingungen ermittelt werden sollten und wie der Bewertungsprozeß zur Ermittlung der gewünschten Informationen gestaltet werden muß.     

Roman iron and steel: A review

ABSTRACT

The production of ferrous metal increased during the Roman Late Republican period, Principate and Empire. The direct bloomery process was used to extract the metal from its ores using slag-tapping and slag-pit furnaces. The fuel was charcoal and an air blast was introduced by bellows-operated tuyères. Iron formed as a bloom, often as a spongy mass of metal, which contained impurities from the smelting process, including unreacted ore, fuel, slag and fragments from the furnace walls, while the metal was often inhomogeneous with varied carbon contents. Blooms were either smithed directly into bars or ingots or they were broken up, which also allowed the removal of gross impurities and a selection of pieces with similar properties to be made. These could then be forge-welded together and formed into characteristically shaped ingots. Making steel in the furnace seems to have been achieved: it depended on the ore and the furnace and conditions within it. Surface carburization was also carried out. Iron and steel were used extensively in construction and for tools and weapons. Fire welding was often used to add pieces of steel to make the edges of tools and weapons, which could be heat-treated by quenching to harden them.     

A study of centrifugal cast high boron high speed steel

In the present study a high‐boron high speed steel (HSS) roll material was designed. Many expensive alloy elements have been substituted by cheap boron alloy, and high‐boron high speed steel roll has been manufactured by centrifugal casting method. The microstructures, mechanical properties and wear resistance of centrifugal casting high‐boron high speed steel roll have been investigated by optical microscopy (OM), scanning electron microscopy (SEM), and X‐ray diffraction (XRD) analysis, hardness test, impact test and wear test. The results indicated that the solidification microstructures of high‐boron high speed steel roll consisted of M₂(B,C), (W,Mo)₂(B,C), M₃(B,C), M₂₃(B,C)₆ type borocarbides and martensite, a small amount of retained austenite. Borocarbides were continuously distributed over the grain boundary. After quenching from 1050 °C, local broken network appeared in partial borocarbides, and fine secondary borocarbide precipitated from the matrix. After tempering from 525 °C, the amount of precipitated borocarbide increased significantly. After heat treatment, the hardness of high‐boron high speed steel roll excelled 60 HRC, and its impact toughness excelled 8.0 J/cm². The single groove steel rolling amount of high‐boron high speed steel rolls increases by 500% than that of bainite cast iron roll, when the rolls are used in K₁ mill housing of bar mill.     

Thixotropy of Systems with Shear Thinning and Plastic Flow Behavior

The definition of the thixotropy is a decrease in viscosity with time in shear and a subsequent recovery of viscosity after the shear deformation is removed.We ...