Antibody arrays prepared by cutinase-mediated immobilization on self-assembled monolayers

Antibody arrays hold considerable potential in a variety of applications including proteomics research, drug discovery, and diagnostics. Many of the schemes used to fabricate the arrays fail to immobilize the antibodies at a uniform density or in a single orientation; consequently, the immobilized antibodies recognize their antigens with variable efficiency. This paper describes a strategy to immobilize antibodies in a single orientation, with a controlled density, using the covalent interaction between cutinase and its suicide substrate. Protein fusions between cutinase and five antibodies of three different types (scFv, V(HH), and FN3) were prepared and immobilized upon self-assembled monolayers (SAMs) presenting a phosphonate capture ligand. The immobilized antibodies exhibit high affinity and selectivity for their target antigens, as monitored by surface plasmon resonance and fluorescence scanning. Furthermore, by changing the density of capture ligand on the SAM the density of the immobilized antibody could be controlled. The monolayers, which also present a tri(ethylene glycol) group, are inert to nonspecific adsorption of proteins and allow the detection of a specific antigen in a complex mixture. The demonstration of cutinase-directed antibody immobilization with insert SAMs provides a straightforward and robust method for preparing antibody chips.     

Regulation of protein binding toward a ligand on chromatographic matrixes by masking and forced-releasing effects using thermoresponsive polymer

A novel concept of affinity regulation based on masking and forced-releasing effects using a thermoresponsive polymer was elucidated. Affinity chromatographic matrixes were prepared using either poly(glycidyl methacrylate-co-ethyleneglycol dimethacrylate) or poly(glycidyl methacrylate-co-triethyleneglycol dimethacrylate) beads immobilized with ligand molecule, Cibacron Blue F3G-A (CB), together with poly(N-isopropylacrylamide) (PIPAAm), a polymer with a cloud point of 32 degrees C. Two different lengths of spacer molecules were used for the immobilization of CB while maintaining the PIPAAm size constant. Chromatographic analyses using bovine serum albumin as a model protein showed a clear correlation between spacer length and binding capacity at temperatures lower than the lower critical solution temperature (LCST) of PIPAAm. The binding capacity under the LCST was significantly reduced only when the calculated spacer length was shorter than the mean size of the extended PIPAAm. Furthermore, the adsorbed protein could be desorbed (released) from the matrix surface by lowering the temperature to below the LCST while maintaining other factors such as pH and ion strength. Selective recovery of human albumin from human sera was demonstrated using this newly developed thermoresponsive affinity column.     

Use of piezoelectric-excited millimeter-sized cantilever sensors to measure albumin interaction with self-assembled monolayers of alkanethiols having different functional headgroups

In this paper, we describe a new modality of measuring human serum albumin (HSA) adsorption continuously on CH3-, COOH-, and OH-terminated self-assembled monolayers (SAMs) of C11-alkanethiols and the direct quantification of the adsorbed amount. A gold-coated piezoelectric-excited millimeter-sized cantilever (PEMC) sensor of 6-mm2 sensing area was fabricated, where resonant frequency decreases upon mass increase. The resonant frequency in air of the detection peak was 45.5 +/- 0.01 kHz. SAMs of C11-thiols (in absolute ethanol) with different end groups was prepared on the PEMC sensor and then exposed to buffer solution containing HSA at 10 microg/mL. The resonant frequency decreased exponentially and reached a steady-state value within 30 min. The decrease in resonant frequency indicates that the mass of the sensor increased due to HSA adsorption onto the SAM layer. The frequency change obtained for the HSA adsorption on CH3-, COOH-, and OH-terminated SAM were 520.8 +/- 8.6 (n = 3), 290.4 +/- 6.1 (n = 2), and 210.6 +/- 8.1 Hz (n = 3), respectively. These results confirm prior conclusions that albumin adsorption decreased in the order, CH(3) > COOH > OH. Observed binding rate constants were 0.163 +/- 0.003, 0.248 +/- 0.006, and 0.381 +/- 0.001 min(-1), for methyl, carboxylic, and hydroxyl end groups, respectively. The significance of the results reported here is that both the formation of self-assembled monolayers and adsorption of serum protein onto the formed layer can be measured continuously, and quantification of the adsorbed amount can be determined directly.     

Mediating Mesenchymal Stem Cells Responses and Osteopontin Adsorption via Oligo(ethylene glycol)-amino Mixed Self-assembled Monolayers

Oligo(ethylene glycol)(-OEG) and amino(-NH_2) mixed self-assembled monolayers(SAMs) were employed as model substrates to investigate the effect of charge density on the fate of mesenchymal stem cells(MSCs) and osteopontin(OPN) adsorption. We found that all surfaces presenting-NH_2 groups favored cell responses regardless of the surface charge. Meanwhile, OPN adsorption could remain stable on the mixed SAMs over a certain range of charge densities. Our work provides some insights into cell responses and protein adsorption to surface charge.     

Platelet and leukocyte adhesion to albumin binding self-assembled monolayers

This study reports the use of tetraethylene glycol-terminated self-assembled monolayers (EG₄ SAMs) as a background non-fouling surface to study the effect of an 18 carbon ligand (C18) on albumin selective and reversible adsorption and subsequent platelet and leukocyte adhesion. Surface characterization techniques revealed an efficient immobilization of different levels of C18 ligand on EG₄ SAMs and an increase of surface thickness and hydrophobicity with the increase of C18 ligands. Albumin adsorption increased as the percentage of C18 ligands on the surface increased, but only 2.5%C18 SAMs adsorbed albumin in a selective and reversible way. Adherent platelets also increased with the amount of immobilized C18. Pre-immersion of samples in albumin before contact with platelets demonstrated an 80% decrease in platelet adhesion. Pre-immersion in plasma was only relevant for 2.5%C18 SAMs since this was the only surface to have less platelet adhesion compared to buffer pre-immersion. EG₄ SAMs adhered negligible amounts of leukocytes, but surfaces with C18 ligands have some adherent leukocytes. Except for 10%C18 SAMs, which increased leukocyte adhesion after albumin pre-adhesion, protein pre-immersion did not influence leukocyte adhesion. It has been shown that a surface with a specific surface concentration of albumin-binding ligands (2.5%C18 SAMs) can recruit albumin selectively and reversibly and minimize the adhesion of platelets, despite still adhering some leukocytes.     

A strategy for the generation of surfaces presenting ligands for studies of binding based on an active ester as a common reactive intermediate: a surface plasmon resonance study

This paper describes the immobilization of ten proteins and two low-molecular-weight ligands on mixed self-assembled monolayers (SAMs) of alkanethiolates on gold generated from the tri(ethylene glycol)-terminated thiol 1 (HS(CH2)11(OCH2CH2)3OH) (chi(1) = 1.0-0.0) and the longer, carboxylic acid-terminated thiol2(HS(CH2)11(OCH2-CH2)6OCH2CO2H) (chi(2) = 0.0-1.0). The immobilization was achieved by a two-step procedure: generation of reactive N-hydroxysuccinimidyl esters from the carboxylic acid groups of 2 in the SAM and coupling of these groups with amines on the protein or ligand. Because this method involves a common reactive intermediate that is easily prepared, it provides a convenient method for attaching ligands to SAMs for studies using surface plasmon resonance spectroscopy (and, in principle, other bioanalytical methods that use derivatized SAMs on gold, silver, and other surfaces). These SAMs were resistant to nonspecific adsorption of proteins having a wide range of molecular weights and isoelectric points. The pH of the coupling buffer, the concentration of protein, the ionic strength of the solution of protein, and the molecular weight of the protein all influenced the amount of the protein that was immobilized. For the proteins investigated in detail--carbonic anhydrase and lysozyme--the highest quantities of immobilized proteins were obtained when using a low ionic strength solution at a value of pH approximately one unit below the isoelectric point (pI) of the protein, at a concentration of approximately 0.5 mg mL-1. Comparisons of the kinetic and thermodynamic constants describing binding of carbonic anhydrase and vancomycin to immobilized benzenesulfonamide and N-alpha-Ac-Lys-D-Ala-D-Ala groups, respectively, on mixed SAMs (by methods described in this paper) and in the carboxymethyl dextran matrix of commercially available substrates yielded (for these systems) essentially indistinguishable values of Kd, koff, and kon.     

Dynamic culture substrate that captures a specific extracellular matrix protein in response to light

Abstract

The development of methods for the off–on switching of immobilization or presentation of cell-adhesive peptides and proteins during cell culture is important because such surfaces are useful for the analysis of the dynamic processes of cell adhesion and migration. This paper describes a chemically functionalized gold substrate that captures a genetically tagged extracellular matrix protein in response to light. The substrate was composed of mixed self-assembled monolayers (SAMs) of three disulfide compounds containing (i) a photocleavable poly(ethylene glycol) (PEG), (ii) nitrilotriacetic acid (NTA) and (iii) hepta(ethylene glycol) (EG₇). Although the NTA group has an intrinsic high affinity for oligohistidine tag (His-tag) sequences in its Ni²⁺-ion complex, the interaction was suppressed by the steric hindrance of coexisting PEG on the substrate surface. Upon photoirradiation of the substrate to release the PEG chain from the surface, this interaction became possible and hence the protein was captured at the irradiated regions, while keeping the non-specific adsorption of non-His-tagged proteins blocked by the EG₇ underbrush. In this way, we selectively immobilized a His-tagged fibronectin fragment (FNIII_7–10) to the irradiated regions. In contrast, when bovine serum albumin—a major serum protein—was added as a non-His-tagged protein, the surface did not permit its capture, with or without irradiation. In agreement with these results, cells were selectively attached to the irradiated patterns only when a His-tagged FNIII_7-10 was added to the medium. These results indicate that the present method is useful for studying the cellular behavior on the specific extracellular matrix protein in cell-culturing environments.     

XPS, TOF-SIMS, NEXAFS, and SPR characterization of nitrilotriacetic acid-terminated self-assembled monolayers for controllable immobilization of proteins

For immobilization of proteins onto surfaces in a specific and controlled manner, it is important to start with a well-defined surface that contains specific binding sites surrounded by a nonfouling background. For immobilizing histidine-tagged (his-tagged) proteins, surfaces containing nitrilotriacetic acid (NTA) headgroups and oligo(ethylene glycol) (OEG) moieties are a widely used model system. The surface composition, structure, and reactivity of mixed NTA/OEG self-assembled monolayers (SAMs) on Au substrates were characterized in detail using X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and surface plasmon resonance (SPR) biosensoring. XPS results for sequential adsorption of NTA thiols followed by OEG thiols showed that OEG molecules were incorporated into an incompletely formed NTA monolayer until a complete mixed SAM was formed. The surface concentration of NTA headgroups was estimated to be 0.9-1.3 molecule/nm2 in the mixed NTA/OEG monolayers, compared to 1.9 molecule/nm2 in pure NTA monolayers. Angle-dependent XPS indicated NTA headgroups were slightly reoriented toward an upright position after OEG incorporation, and polarization-dependent NEXAFS results indicated increased ordering of the alkane chains of the molecules. Nitrogen-containing and OEG-related secondary ion fragments from the TOF-SIMS experiments confirmed the presence of NTA headgroups and OEG moieties in the monolayers. A multivariate peak intensity ratio was developed for estimating the relative NTA concentration in the outermost (10 A) of the monolayers. SPR measurements of a his-tagged, humanized anti-lysozyme variable fragment (HuLys Fv) immobilized onto Ni(II)-treated mixed NTA/OEG and pure NTA monolayers demonstrated the reversible, site-specific immobilization of his-tagged HuLys Fv (108-205 ng/cm2) with dissociation rates (koff) between 1.0 x 10-4 and 2.1 x 10-5 s-1, both depending on the NTA surface concentration and orientation. The monolayers without Ni(II) treatment exhibited low nonspecific adsorption of his-tagged HuLys Fv (<2 ng/cm2).     

Unique ordered domains of biphenylthiol self-assembled monolayers on Au(111)

The surface structure and adsorption conditions of biphenylthiol (BPT) self-assembled monolayers (SAMs) on Au(111) were examined using scanning tunneling microscopy (STM) and X-ray photoelectron microscopy (XPS). STM imaging revealed that the structural order of BPT SAMs formed in a 0.01 mM ethanol solution at 60 degrees C decreases with increasing immersion time. Interestingly, BPT SAMs formed after 30 min have unique ordered domains containing well-ordered (square root of 3 x square root of 3)R30 degrees structures and bright rows that are connected by small aggregated domains with a periodicity of approximately 10 angstroms, results that have never been observed for other thiol SAM systems. Distances between the bright rows were 20-35 angstroms. The bright small domains contained five or six BPT molecules each, which may have originated from differences in the adsorption orientations of biphenyl groups that were induced by localized interactions between them. XPS measurements for BPT SAMs on Au(111) showed the two sulfur peaks at 161.2 and 162.2 eV, implying the formation of chemisorbed monolayers. Our results are anticipated to be useful for understanding the formation and structure of BPT SAMs on gold surfaces.     

Poly(glycidyl methacrylate) beads embedded cryogels for pseudo-specific affinity depletion of albumin and immunoglobulin G

Depletion of high abundant proteins like albumin and immunoglobulin G (IgG) can be beneficial in the analysis of serum proteins. For this purpose, Cibacron Blue F3GA and iminodiacetic acid (IDA)-Cu²⁺ containing poly(glycidyl methacrylate) (PGMA) beads (1.6 µm in diameter) were embedded into the poly(hydroxyethyl methacrylate) (PHEMA) cryogel. The PGMA beads were prepared by dispersion polymerization. The PGMA beads were modified with Cibacron Blue F3GA and iminodiacetic acid (IDA)-Cu²⁺ for simultaneous albumin and IgG depletion, respectively. The PHEMA cryogel was synthesized by free radical polymerization in the presence of the modified PGMA beads. The PHEMA and PHEMA/PGMA composite cryogels were characterized by swelling measurements and scanning electron microscopy (SEM). Protein depletion studies were carried out in a continuous experimental set-up in a stacked column. Albumin adsorption capacity of the PGMA-Cibacron Blue F3GA beads embedded PHEMA cryogel (PHEMA/PGMA-Cibacron Blue F3GA) was 342 mg/g and IgG adsorption capacity of the PGMA-IDA-Cu²⁺ beads embedded PHEMA cryogel (PHEMA/PGMA-IDA-Cu²⁺) was 257 mg/g. The composite cryogels depleted albumin and IgG from human serum with 89.4% and 93.6% efficiency, respectively. High desorption values (over 90% for both modified cryogels) were achieved with 0.05 M phosphate buffer containing1.0 M NaCl.     

Palladium as a substrate for self-assembled monolayers used in biotechnology

This paper describes self-assembled monolayers (SAMs) on palladium that resist the nonspecific adsorption of proteins and the adhesion of mammalian cells. These SAMs form when thin films of palladium are exposed to solutions of alkanethiol with the general structure HS(CH(2))(m)()(OCH(2)CH(2))(n)()OH (m = 2, 11; n = 3, 6, 7). Ellipsometry and surface plasmon resonance spectroscopy (using a palladium-on-gold substrate) showed that these SAMs resist adsorption of all proteins present in bovine serum. Microislands of SAMs of octadecanethiol on palladium allowed patterned adhesion and growth of mammalian cells (in a "sea" of oligo(ethyleneglycol)-terminated SAM). The oligo(ethyleneglycol)-terminated SAM resisted the invasion of cells for over four weeks under standard conditions of cell culture; similar SAMs on gold remained patterned for only two weeks.     

Surface-enhanced Raman spectroscopy of self-assembled monolayers: sandwich architecture and nanoparticle shape dependence

Surface enhanced Raman scattering (SERS) spectra of 4-mercaptobenzoic acid (4-MBA) self-assembled monolayers (SAMs) on gold substrates is presented for SAMs onto which gold nanoparticles of various shapes have been electrostatically immobilized. SERS spectra of 4-MBA SAMs are enhanced in the presence of immobilized gold nanocrystals by a factor of 10(7)-10(9) relative to 4-MBA in solution. Large enhancement factors are a likely result of plasmon coupling between the nanoparticles (localized surface plasmon) and the smooth gold substrate (surface plasmon polariton), creating large localized electromagnetic fields at their interface, where 4-MBA molecules reside in this sandwich architecture. Moreover, enhancement factors depend on nanoparticle shape and vary by a factor of 10(2). This SERS geometry offers large surface enhancements for molecules adsorbed onto planar substrates and could be quite useful for determining chemical information for poor Raman scatterers from assays on 2-D substrates.     

Molecular dynamics simulation of the enhancement of cobra cardiotoxin and E6 protein binding on mixed self-assembled monolayer molecules

Molecular dynamics simulations are performed on n-alkinethiol self-assembled monolayers (SAMs) and their mixture on a gold surface so that the orientations of the binding of cobra cardiotoxin and E6 protein molecules can be selected using the mixing ratio of CH3-terminated SAMs with different chain lengths. The simulations suggest that a SAM surface with different mixing ratios may provide a possible platform for aligning protein molecules with a desired orientation and for enhancing the binding energy of the protein on the designed surface.     

A new method of immobilization of proteins on activated ester terminated alkanethiol monolayers towards the label free impedancemetric detection

This paper investigates a new immobilization procedure for biological molecules that is based on the formation of reactive ω-functionalized-self-assembled thiol monolayers onto a gold electrode. The homogeneous self-assembled monolayer was characterized by X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The SAM modified gold electrode showed a clear peak corresponding to S_2p that characterized the Au-thiolate bond, while cyclic voltammetry and electrochemical impedance spectroscopy measurements, in 10 mM phosphate buffer pH 7, in the presence of Fe(CN)₆^{− 3/− 4} as redox probe, showed that these monolayers were densely packed and prevented electron transfer towards the gold surface. These homogeneous SAMs were used to immobilize biotin hydrazide by covalent attachment, after the nucleophilic attack of the amino group of biotin hydrazide on the ω-activated ester function of thiols. The biotin–avidin interaction was then examined as a model for an affinity biosensor with electrochemical impedance spectroscopy. A Randles equivalent circuit was used for the interpretation of impedance data and the change in the interfacial properties at the modified-electrode/electrolyte interface were monitored through charge-transfer resistance variation. The proposed affinity biosensor showed a detection range that was linear between 200 and 800 ng/ml for avidin. In order to improve the sensitivity the technique of mixed self-assembled monolayers was adopted. Mixed SAMs were elaborated by co-adsorption of two differently substituted thiols, one was substituted by a reactive group that was used to react with the amino group of biotin hydrazide, whereas the other was substituted by an hydroxyl group that was chosen to mimic protein resistance. In this study, we started with a 1:3 activated ester:hydroxyl-terminated alkanethiol ratio. The results obtained with the mixed SAMs appeared to be better than those obtained with the homogeneous SAMs, and the corresponding affinity biosensor presented two detection ranges that were linear between 20 and 100 ng/ml and between 100 and 1200 ng/ml, respectively, with two different slopes.     

Dynamic culture substrate that captures a specific extracellular matrix protein in response to light

The development of methods for the off–on switching of immobilization or presentation of cell-adhesive peptides and proteins during cell culture is important because such surfaces are useful for the analysis of the dynamic processes of cell adhesion and migration. This paper describes a chemically functionalized gold substrate that captures a genetically tagged extracellular matrix protein in response to light. The substrate was composed of mixed self-assembled monolayers (SAMs) of three disulfide compounds containing (i) a photocleavable poly(ethylene glycol) (PEG), (ii) nitrilotriacetic acid (NTA) and (iii) hepta(ethylene glycol) (EG₇). Although the NTA group has an intrinsic high affinity for oligohistidine tag (His-tag) sequences in its Ni²⁺-ion complex, the interaction was suppressed by the steric hindrance of coexisting PEG on the substrate surface. Upon photoirradiation of the substrate to release the PEG chain from the surface, this interaction became possible and hence the protein was captured at the irradiated regions, while keeping the non-specific adsorption of non-His-tagged proteins blocked by the EG₇ underbrush. In this way, we selectively immobilized a His-tagged fibronectin fragment (FNIII_7–10) to the irradiated regions. In contrast, when bovine serum albumin—a major serum protein—was added as a non-His-tagged protein, the surface did not permit its capture, with or without irradiation. In agreement with these results, cells were selectively attached to the irradiated patterns only when a His-tagged FNIII_7-10 was added to the medium. These results indicate that the present method is useful for studying the cellular behavior on the specific extracellular matrix protein in cell-culturing environments.     

In situ single-molecule detection of antibody-antigen binding by tapping-mode atomic force microscopy

We performed in situ detection of specific and nonspecific binding during immunoreaction on surfaces at the same location before and after analyte was injected using tapping-mode atomic force microscopy (TM-AFM) in liquid and demonstrated the ability of TM-AFM to monitor the occurrence of single-molecule binding events and to distinguish nonspecific from specific binding by examining topographical change. Two antigen/antibody pairs were investigated: chorionic gonadotropin (hCG)/mouse monoclonal anti-hCG and goat IgG (anti-intact hCG)/ mouse monoclonal anti-goat IgG. Antibody (or antigen) molecules were covalently immobilized on uniform mixed self-assembled monolayers (SAMs) terminated with carboxylic acid and hydroxyl groups. Mixed SAMs allow the control of the density of immobilized antibody (or antigen) on surfaces to achieve the detection of individual antigens, antibodies, and antigen/antibody complexes. This in situ TM-AFM-based detection method allows the single-molecule detection of antigen/antibody binding under near-physiological environment and the distinction of nonspecific from specific binding. It could be extended into a microarray.     

Enhanced photocurrent generation of binary self-assembled monolayers of di-(3-aminopropyl)-viologen and methylviologen on indium tin oxide

The binary self-assembled monolayers (SAMs) of di-(3-aminopropyl)-viologen (DAPV) and methylviologen (MV) molecules on indium tin oxide (ITO) were prepared by dipping the DAPV SAMs/ITO substrates into MV solution. The DAPV-MV SAM films were characterized by UV-vis. absorption spectroscopy, Rutherford backscattering spectroscopy, and cyclic voltammetry. Optical band gap, lowest unoccupied molecular orbital, and highest occupied molecular orbital of DAPV-MV SAMs were measured to be 1.6, -4.3, and -5.9 eV, respectively. We found that although DAPV SAMs have a quantum yield of 0.11%, the binary SAM films have a good quantum yield of 2.30%, which was 20 times higher than that of DAPV SAMs on ITO. This result may be due to the higher adsorption property of the binary SAMs for the light in visible range compared to that of DAPV SAMs. From this study, we demonstrated that the photocurrent generation systems with a high quantum yield can be obtained by the functional binary SAMs.     

Analysis of self-assembled monolayers on gold surfaces using direct analysis in real time mass spectrometry

Mass spectrometry was performed on self-assembled monolayers (SAMs) of dodecanethiol on gold using the new direct analysis in real time (DART) ionization technique. Observed peaks for the SAMs included monomers, dimers, and trimers of the SAM molecules, with the dimer and trimer relative peak heights enhanced as compared to the spectra for neat dodecanethiol. The possibility that the observed peaks were due to residual (noncovalently bonded) material on the surface was tested by attempting to observe residual dodecanol. No peaks corresponding to dodecanol were observed. These results indicate that DART is an excellent ionization method for the direct and unambiguous mass analysis of chemical species in self-assembled monolayers.     

Arrays of self-assembled monolayers for studying inhibition of bacterial adhesion

This paper describes a simple and convenient method for the rapid screening of potential inhibitors of bacterial adhesion and for the quantitative evaluation of the efficacy of the inhibitors using arrays of self-assembled monolayers (SAMs) of alkanethiolates on gold that are presented on a 96-well microtiter plate. The SAMs present mixtures of alpha-D-mannopyranoside (a ligand that promotes the adhesion of uropathogenic Escherichia coli by binding to the FimH proteins on the tip of type 1 pili), and tri(ethylene glycol) moieties (organic groups that resist nonspecific adsorption of proteins and cells). The SAMs provide surfaces for studies of adhesion of uropathogenic E. coli to specific ligands; they also provide excellent resistance to nonspecific adhesion. Using arrays of mannoside-presenting SAMs, inhibitors of bacterial adhesion were easily screened by observing the number of bacteria that adhered to the surface of the SAMs in the presence of inhibitor. The potency of the inhibitor was quantified by measuring the percentage of inhibition as a function of the concentration of the inhibitor. The properties of SAMs, when combined with the convenience and standardization of a microtiter plate, make arrays of SAMs a versatile tool that can be applied to high-throughput screening of inhibitors of bacterial, viral, and mammalian cell adhesion and of strongly binding ligands for proteins.     

Surface modifying of microporous PTFE capillary for bilirubin removing from human plasma and its blood compatibility

In this study, human serum albumin (HSA) was covalently immobilized onto the inner surface of microporous poly(tetrafluoroethylene) (MPTFE) capillaries for direct bilirubin removal from human plasma. To obtain active binding sites for HSA, the MPTFE capillaries were chemically functionalized by using a coating of poly(vinyl alcohol) (PVA)–glycidyl methacrylate (GMA) copolymers. Characterization of grafted MPTFE capillaries was verified by XPS, Fourier transform infrared spectroscopy (FT-IR), scanning electronic microscopy (SEM). Non-specific adsorption on the PVA–GMA coated capillary remains low (< 0.38 mg bilirubin/g), and higher affinity adsorption capacity, of up to 73.6 mg bilirubin/g polymer was obtained after HSA is immobilized. Blood compatibility of the grafted MPTFE capillary was evaluated by SEM and platelet rich plasma (PRP) contacting experiments. The experimental data on blood compatibility indicated that PVA-coated and PVA–GMA–HSA coated PTFE capillary showed a sharp suppress on platelets adhesion. The proposed method has the potential of serving in bilirubin removal in clinical application.