Integration of enzymes and electrodes: spectroscopic and electrochemical studies of chitosan-enzyme films

A new film-forming solution was developed for the efficient immobilization of enzymes on solid substrates. The solution consisted of a biopolymer, chitosan (CHIT), that was chemically modified with a permeability-controlling agent, Acetyl Yellow 9 (AY9), using glutaric dialdehyde (GDI) as a molecular tether. A model enzyme, glucose oxidase (GOx), was mixed with the CHIT-GDI-AY9 solution and cast on the surface of platinum electrodes to form robust CHIT-GDI-AY9-GOx films for glucose biosensing. UV-visible and infrared spectroscopies were used to determine the composition of the films. The optimized films contained on average 1 molecule of AY9/3 glucosamine units of chitosan and 25 free GDI tethers/1 molecule of GOx. The electrochemical assays of the films indicated both a very high efficiency of enzyme immobilization (approximately 99%) and large enzyme activity (60 units cm(-2)). The latter translated into a high sensitivity (42 mA M(-1) cm(-2)) of the Pt/CHIT-GDI-AY9-GOx biosensor toward glucose. The biosensor operated at 0.450 V, had a fast response time (t90% < or = 3 s), and was free of typical interferences, and its dynamic range covered 3 orders of magnitude of glucose concentrations. The lowest actually detectable concentration was 10 microM glucose. In addition, the biosensor displayed a practical shelf life and excellent operational stability, e.g. its response was stable during 24-h testing under continuous polarization and continuous flow of 5.0 mM glucose solution. The proposed approach to enzyme immobilization is simple, efficient, and cost-effective and should be of importance in the development of biosensors based on other enzymes that are more expensive than glucose oxidase.     

An Amperometric Glucose Biosensor With Enhanced Measurement Stability and Sensitivity Using an Artificially Porous Conducting Polymer

A conducting polymer [polypyrrole (PPy)]-based amperometric biosensor fabricated on a platinum-coated nanoporous alumina electrode has been described. This fabricating process introduced artificial porosity into the PPy film, and the template pore sizes were carefully chosen to match the size of the glucose oxidase (GOx) molecule. The $hbox{PF}_{6}^{-}$-doped PPy film was synthesized with 0.05 M pyrrole and 0.1 M $hbox{NaPF}_{6}$ at a current density of 0.3 $hbox{mA/cm}^{2}$ for 90 s. Immobilization was done by physically adsorbing 5 $muhbox{L}$ of GOx on the nanoporous PPy film. Glutaraldehyde (0.1 wt.%, 5 $muhbox{L}$) was used for cross-linking. The synthesized films were characterized by using an electrochemical technique and scanning electron microscopy (SEM). Amperometric responses were measured as a function of different concentrations of glucose at 0.4 V. Nanoporous electrodes lead to high enzyme loading, whereas the use of a cross-linking agent increased stability, sensitivity, reproducibility, repeatability, and shelf life.      

Optimal environment for glucose oxidase in perfluorosulfonated ionomer membranes: improvement of first-generation biosensors

An optimal environment for glucose oxidase (GOx) in Nafion membranes is achieved using an advanced immobilization protocol based on a nonaqueous immobilization route. Exposure of glucose oxidase to water-organic mixtures with a high (85-95%) content of the organic solvent resulted in stabilization of the enzyme by a membrane-forming polyelectrolyte. Such an optimal environment leads to the highest enzyme specific activity in the resulting membrane, as desired for optimal use of the expensive oxidases. Casting solution containing glucose oxidase and Nafion is completely stable over 5 days in a refrigerator, providing almost absolute reproducibility of GOx-Nafion membranes. A glucose biosensor was prepared by casting the GOx-Nafion membranes over Prussian Blue-modified glassy carbon disk electrodes. The biosensor operated in the FIA mode allows the detection of glucose down to the 0.1 microM level, along with high sensitivity (0.05 A M(-1) cm(-2)), which is only 10 times lower than the sensitivity of the hydrogen peroxide transducer used. A comparison with the recently reported enzyme electrodes based on similar H2O2 transducers (transition metal hexacyanoferrates) shows that the proposed approach displays a dramatic (100-fold) improvement in sensitivity of the resulting biosensor. Combined with the attractive performance of a Prussian Blue-based hydrogen peroxide transducer, the proposed immobilization protocol provides a superior performance for first-generation glucose biosensors in term of sensitivity and detection limits.     

Glucose fast-response amperometric sensor based on glucose oxidase immobilized in an electropolymerized poly(o-phenylenediamine) film

o-Phenylenediamine has been used for glucose oxidase (GOx) immobilization on Pt electrodes by electrochemical polymerization at +0.65 V vs SCE. By this approach the enzyme is entrapped in a strongly adherent, highly reproducible thin membrane, whose thickness is around 10 nm. This one-step procedure produces a glucose sensor with a response time less than 1 s, an active enzyme loading higher than 3 units/cm2 of electrode surface, a high sensitivity, and a sufficiently wide linear range. The glucose response shows an apparent Michaelis-Menten constant, K'm = 14.2 mM, and a limiting current density, jmax of 181 microA/cm2. The product kD of partition and diffusion coefficients of glucose in the polymer film is on the order of 10(-13) cm2/s. Due to permselectivity characteristics of the membrane, the access of ascorbate, a common interfering species, to the electrode surface is blocked. To our knowledge, this represents the first report of a membrane capable, at the same time, of immobilizing GOx and rejecting ascorbate. The interesting electrode behavior can be rationalized by using an existing model predicting the amperometric response of an immobilized GOx system.     

Optimizing the functionalization process for nanopillar enhanced electrodes with GOx/PPY for glucose detection

In this study, the functionalization process for nanopillar enhanced electrodes (NEEs) using glucose oxidase (GOx) with polypyrrole (PPY) is optimized for the purpose of achieving enhanced sensing performances for these electrodes in glucose detection. Specifically, an optimal roughness factor for the NEEs and an optimal set of electro-polymerization/deposition parameters for their functionalization using GOx/PPY are identified. Results show that NEEs with a roughness factor of about 60 are optimal for enhancing the amperometric current responses and that for such electrodes an electro-functionalization/deposition process at a deposition current of 50?μA?cm(-2) and a total charge of 150?mC?cm(-2) will give rise to a high sensing performance with a sensitivity as high as 36?μA?cm(-2)?mM(-1).     

A comparative study of enzyme immobilization strategies for multi-walled carbon nanotube glucose biosensors

This work addresses the comparison of different strategies for improving biosensor performance using nanomaterials. Glucose biosensors based on commonly applied enzyme immobilization approaches, including sol-gel encapsulation approaches and glutaraldehyde cross-linking strategies, were studied in the presence and absence of multi-walled carbon nanotubes (MWNTs). Although direct comparison of design parameters such as linear range and sensitivity is intuitive, this comparison alone is not an accurate indicator of biosensor efficacy, due to the wide range of electrodes and nanomaterials available for use in current biosensor designs. We proposed a comparative protocol which considers both the active area available for transduction following nanomaterial deposition and the sensitivity. Based on the protocol, when no nanomaterials were involved, TEOS/GOx biosensors exhibited the highest efficacy, followed by BSA/GA/GOx and TMOS/GOx biosensors. A novel biosensor containing carboxylated MWNTs modified with glucose oxidase and an overlying TMOS layer demonstrated optimum efficacy in terms of enhanced current density (18.3 ± 0.5 μA mM(-1) cm(-2)), linear range (0.0037-12 mM), detection limit (3.7 μM), coefficient of variation (2%), response time (less than 8 s), and stability/selectivity/reproducibility. H(2)O(2) response tests demonstrated that the most possible reason for the performance enhancement was an increased enzyme loading. This design is an excellent platform for versatile biosensing applications.     

Multilayered assembly of dendrimers with enzymes on gold: thickness-controlled biosensing interface

A new approach to construct a multilayered enzyme film on the Au surface for use as a biosensing interface is described. The film was prepared by alternate layer-by-layer depositions of G4 poly(amidoamine) dendrimers and periodate-oxidized glucose oxidase (GOx). The cyclic voltammograms obtained from the Au electrodes modified with the GOx/dendrimer multilayers revealed that bioelectrocatalytic response is directly correlated to the number of deposited bilayers, that is, to the amount of active enzyme immobilized on the Au electrode surface. From the analysis of voltammetric signals, the coverage of active enzyme per GOx/dendrimer bilayer during the multilayer-forming steps was estimated, which demonstrates that the multilayer is constructed in a spatially ordered manner. Also, with the ellipsometric measurements, a linear increment of the film thickness was registered, supporting the formation of the proposed multilayered structure. The E5D5 electrode showed the sensitivity of 14.7 microA x mM(-1) glucose x cm(-2) and remained stable over 20 days under day-by-day calibrations. The proposed method is simple and would be applicable to the constructions of thickness- and sensitivity-controllable biosensing interfaces composed of multienzymes as well as a single enzyme.     

Composite carbon paste biosensor for phenolic derivatives based on in situ electrogenerated polypyrrole binder

Amperometric biosensors based on new composite carbon paste (CPE) electrodes have been designed for the determination of phenolic compounds. The composite CPEs were prepared by in situ generation of polypyrrole (PPy) within a paste containing the enzyme polyphenol oxidase (PPO). The best paste composition (enzyme/pyrrole monomer/carbon particles/Nujol) was determined for a model enzyme, glucose oxidase, according to the enzymatic activity of the resulting electrodes and to the enzyme leakage from the paste during storage in phosphate buffer. The in situ electrogenerated PPy enables improvement in enzyme immobilization within the paste since practically no enzyme was lost in solution after 72 h of immersion. Moreover, the enzyme activity remains particularly stable under storage since the biocomposite structure maintains 80% of its activity after 1-month storage. Following the optimization of the paste composition, PPO-based carbon paste biosensors were prepared and presented excellent analytical properties toward catechol detection with a sensitivity of 4.7 A M(-1) cm(-2) and a response time lower than 20 s. The resulting biosensors were finally applied to the determination of epicatechin and ferulic acid as flavonol and polyphenol model, respectively.     

Functionalization of a poly(amidoamine) dendrimer with ferrocenyls and its application to the construction of a reagentless enzyme electrode

Poly(amidoamine) dendrimers having various degrees of modification with the redox-active ferrocenyls were prepared by controlling the molar ratio of ferrocenecarboxaldehyde to amine groups of dendrimers. By alternate layer-by-layer depositions of partial ferrocenyl-tethered dendrimers (Fc-D) with periodate-oxidized glucose oxidase (GOx) on a Au surface, an electrochemically and enzymatically active multilayered assembly of enzyme was constructed. The resulting GOx/Fc-D multilayer-associated electrodes were electrochemically analyzed, and the surface concentration of ferrocenyl groups, active enzyme coverage, and sensitivity were estimated. A 32% dendrimer modification level of surface amines to ferrocenyls was found to be an optimum in terms of enzyme-dendrimer network formation, electrochemical interconnectivity of ferrocenyls, and electrode sensitivity. With the prepared Fc(32%)-tethered dendrimers, mono- and multilayered GOx/Fc-D electrodes were constructed, and their electrochemical and catalytic properties were characterized. The bioelectrocatalytic signals from the multilayered GOx/Fc-D electrodes were shown to be directly correlated to the number of deposited bilayers. From this result, it seems that the electrode sensitivity is directly controllable, and the multilayer-forming strategy with partial ferrocenyl-tethered dendrimers is useful for the construction of reagentless biosensors.     

Following the biocatalytic activities of glucose oxidase by electrochemically cross-linked enzyme-Pt nanoparticles composite electrodes

An integrated platinum nanoparticles (NPs)/glucose oxidase (GOx) composite film associated with a Au electrode is used to follow the biocatalytic activities of the enzyme. The film is assembled on a Au electrode by the electropolymerization of thioaniline-functionalized Pt NPs and thioaniline-modified GOx. The resulting enzyme/Pt NPs-functionalized electrode stimulates the O 2 oxidation of glucose to gluconic acid and H 2O 2. The modified electrode is then implemented to follow the activity of the enzyme by the electrochemical monitoring of the generated H 2O 2. The effect of the composition of the Pt NPs/GOx cross-linked nanostructures and the optimal conditions for the preparation of the electrodes are discussed.     

Enzyme biosensor based on plasma-polymerized film-covered carbon nanotube layer grown directly on a flat substrate

We report a novel approach to fabrication of an amperometric biosensor with an enzyme, a plasma-polymerized film (PPF), and carbon nanotubes (CNTs). The CNTs were grown directly on an island-patterned Co/Ti/Cr layer on a glass substrate by microwave plasma enhanced chemical vapor deposition. The as-grown CNTs were subsequently treated by nitrogen plasma, which changed the surface from hydrophobic to hydrophilic in order to obtain an electrochemical contact between the CNTs and enzymes. A glucose oxidase (GOx) enzyme was then adsorbed onto the CNT surface and directly treated with acetonitrile plasma to overcoat the GOx layer with a PPF. This fabrication process provides a robust design of CNT-based enzyme biosensor, because of all processes are dry except the procedure for enzyme immobilization. The main novelty of the present methodology lies in the PPF and/or plasma processes. The optimized glucose biosensor revealed a high sensitivity of 38 μA mM(-1) cm(-2), a broad linear dynamic range of 0.25-19 mM (correlation coefficient of 0.994), selectivity toward an interferent (ascorbic acid), and a fast response time of 7 s. The background current was much smaller in magnitude than the current due to 10 mM glucose response. The low limit of detection was 34 μM (S/N = 3). All results strongly suggest that a plasma-polymerized process can provide a new platform for CNT-based biosensor design.     

Kinetics and thermodynamics of free flavins and the flavin-based redox active site within glucose oxidase dissolved in solution or sequestered within a sol-gel-derived glass

We report on the steady-state and time-resolved fluorescence from the redox active site flavine adenine dinucleotides (FADs) that are bound to glucose oxidase (GOx) when this enzyme is dissolved in aqueous solution or sequestered within a sol-gel-derived glass. To the best of our knowledge, this represents the first report on the actual dynamics of an enzyme active site when the enzyme is part of a sol-gel-derived glass. The results from these experiments show that the "free" FAD intramolecular folding/unfolding kinetics are slowed 3-10-fold within the glass vs solution. The intramolecular exciplex formation event (i.e., excited-state FAD residue folding/unfolding) is completely arrested for the GOx-bound FAD if the enzyme is sequestered within a glass in the absence of glucose. This is significantly different from the behavior of GOx dissolved in solution. However, despite this difference in behavior, the GOx molecules that are sequestered within the glasses continue to function somewhat like GOx dissolved in aqueous solution if they are challenged with glucose. We also found that the GOx molecules do not leach from the glass and they exhibit rotational mobility that is only 2-fold less than GOx dissolved in aqueous solution at 20 degrees C. In aqueous solution or within these glasses, the enzyme pocket that hosts the FAD redox sites opens up by 25-30% when GOx is challenged with glucose. Finally, we present preliminary analytical results for film-based sol-gel-derived biosensors that contain GOx, L-amino acid oxidase or cholesterol oxidase wherein the intrinsic FAD fluorescence produces the analytical signal.     

Electrostatic immobilization of glucose oxidase in a weak acid, polyelectrolyte hyperbranched ultrathin film on gold: fabrication, characterization, and enzymatic activity.

In this paper we show that hyperbranched polymers can be used as a host matrix for electrostatic entrapment of enzymes. Specifically, amine-functionalized glucose oxidase (GOx+) and horseradish peroxidase, as well as poly(amidoamine) dendrimer-modified horseradish peroxidase, reversibly sorb into polyanionic, hyperbranched poly(sodium acrylate) (PAA-) films that are on the order of a few hundred angstroms thick. The quantity of GOx+ entrapped within the PAA- films depends on the nature of film preparation but is typically on the order of 0.06 unit/cm2. The extent to which entrapped GOx+ retains its activity depends on the film history, but for PAA-/GOx+ composites not exposed to glucose and stored at 4 degrees C, the original activity is retained for up to 68 days and perhaps longer.     

Fabrication of a glucose biosensor based on citric acid assisted cobalt ferrite magnetic nanoparticles

A novel and practical glucose biosensor was fabricated with immobilization of Glucose oxidase (GOx) enzyme on the surface of citric acid (CA) assisted cobalt ferrite (CF) magnetic nanoparticles (MNPs). This innovative sensor was constructed with glassy carbon electrode which is represented as (GOx)/CA-CF/(GCE). An explicit high negative zeta potential value (-22.4 mV at pH 7.0) was observed on the surface of CA-CF MNPs. Our sensor works on the principle of detection of H2O2 which is produced by the enzymatic oxidation of glucose to gluconic acid. This sensor has tremendous potential for application in glucose biosensing due to the higher sensitivity 2.5 microA/cm2-mM and substantial increment of the anodic peak current from 0.2 microA to 10.5 microA.     

Exploiting metal-organic coordination polymers as highly efficient immobilization matrixes of enzymes for sensitive electrochemical biosensing

We report on the exploitation of metal-organic coordination polymers (MOCPs) as new and efficient matrixes to immobilize enzymes for amperometric biosensing of glucose or phenols. A ligand, 2,5-dimercapto-1,3,4-thiadiazole (DMcT), two metallic salts, NaAuCl(4) and Na(2)PtCl(6), and two enzymes, glucose oxidase (GOx) and tyrosinase, are used to demonstrate the novel concept. Briefly, one of the metallic salts is added into an aqueous suspension containing DMcT and one of the enzymes to trigger the metal-organic coordination reaction, and the yielded MOCPs-enzyme biocomposite (MEBC) is then cast-coated on an Au electrode for biosensing. The aqueous-phase coordination polymerization reactions of the metallic ions with DMcT are studied by visual inspection as well as some spectroscopic, microscopic, and electrochemical methods. The thus-prepared glucose and phenolic biosensors perform better in analytical performance (such as sensitivity and limit of detection) than those prepared by the conventional chemical and/or electrochemical polymerization methods and most of the reported analogous biosensors, as a result of the improved enzyme load/activity and mass-transfer efficiency after using the MOCPs materials with high adsorption/encapsulation capability and unique porous structure. For instance, the detection limit for catechol is as low as 0.2 nM here, being order(s) lower than those of most of the reported analogues. The enzyme electrode was also used to determine catachol in real samples with satisfactory results. The emerging MOCPs materials and the suggested aqueous-phase preparation strategy may find wide applications in the fields of bioanalysis, biocatalysis, and environmental monitoring.     

Flexible carbon cloth electrode modified by hollow core-mesoporous shell carbon as a novel efficient bio-anode for biofuel cell

A new approach is described to produce an efficient electrode material for biofuel cells using flexible carbon cloth (FCC) and hollow core-mesoporous shell carbon (HCMSC) nanospheres as bio-anode materials. The bio-electrochemical activity of glucose oxidase (GOx) enzyme adsorbed on this bio-anode was evaluated, with the maximum anodic current density varying from 80 microA cm(-2) to 180 microA cm-2 for glucose concentrations up to 5.0 mmol L(-1) for the FCC modified electrode with HCMSCs. The open circuit cell voltage was E(0) = 380 mV, and the catalytic electro-oxidation current of glucose reached 0.1 mA cm(-2) at 0.0 V versus Ag/AgCl. This new system employing HCMSC-based FCC is promising toward novel bio-anodes for biofuel cells using glucose as a fuel.     

Electron-transfer studies with a new flavin adenine dinucleotide dependent glucose dehydrogenase and osmium polymers of different redox potentials

A new extracellular flavin adenine dinucleotide (FAD)-dependent glucose dehydrogenase from Glomerella cingulata (GcGDH) was electrochemically studied as a recognition element in glucose biosensors. The redox enzyme was recombinantly produced in Pichia pastoris and homogeneously purified, and its glucose-oxidizing properties on spectrographic graphite electrodes were investigated. Six different Os polymers, the redox potentials of which ranged in a broad potential window between +15 and +489 mV versus the normal hydrogen electrode (NHE), were used to immobilize and "wire" GcGDH to the spectrographic graphite electrode's surface. The GcGDH/Os polymer modified electrodes were evaluated by chronoamperometry using flow injection analysis. The current response was investigated using a stepwisely increased applied potential. It was observed that the ratio of GcGDH/Os polymer and the overall loading of the enzyme electrode significantly affect the performance of the enzyme electrode for glucose oxidation. The best-suited Os polymer [Os(4,4'-dimethyl-2,2'-bipyridine)(2)(PVI)Cl](+) had a potential of +309 mV versus NHE, and the optimum GcGDH/Os polymer ratio was 1:2 yielding a maximum current density of 493 μA·cm(-2) at a 30 mM glucose concentration.     

A bioconjugated polyglycerol dendrimer with glucose sensing properties

In this work, the biological and electrochemical properties of glucose biosensor based on polyglycerol dendrimer (PGLD) is presented. Streptokinase (SK), glucose oxidase (GOx) and phosphorylcholine (PC) were immobilized onto PGLD to obtain a blood compatible bioconjugate with glucose sensing properties. The bioconjugated PGLD was entrapped in polyaniline nanotubes (PANINT's) through template electrochemical polymerization of aniline. PANINT's were used as electron mediator due to their high ability to promote electron-transfer reactions involving GOx. Platelet adhesion, fibrinolytic activity and protein adsorption were studied by in vitro experiments to examine the interaction of blood with PGLD biosensor. The PGLD biosensor exhibits a strong and stable amperometric response to glucose. The enzyme affinity for the substrate (K (M) (app) ) indicates that the enzyme activity was not significantly altered after the bioconjugation of GOx with PGLD dendrimer. The bioelectrochemical properties suggest that the bioconjugated PGLD developed in this work appears to be a good candidate for providing interfaces for implantable biosensors, especially oxidoreductase-based sensors.     

Application of polymer quantum dot-enzyme hybrids in the biosensor development and test paper fabrication

Both glutathione capped CdTe quantum dots (QDs) and enzymes were encapsulated with poly(diallyldimethylammonium chloride) (PDDA) via electrostatic attraction to form hybrid films. The obtained PDDA QD-enzyme hybrids feature both high fluorescence and biorecognition. In the obtained hybrid materials, the fluorescence emission of the QDs was stable for at least 3 months, and the structure and activity of the enzyme was also well maintained as the Michaelis constant of tyrosinase was determined to be 0.90 mmol/L, which is just 2 times higher than that of free enzyme. This hybrid material was then utilized as a platform for the development of biosensors based on the quenching effects of the enzymatic products on the emission of the QDs with a kind of phenol (catechol) and glucose as example analytes. The detection limits of catechol and glucose were 1.0 × 10(-5) and 5.0 × 10(-6) mol/L, respectively. Moreover, this hybrid material was applied to the fabrication of test paper for these two analytes. The test paper was very stable with respect to the fluorescence of the QDs and the activity of the enzyme maintained for at least 1 month.     

Electrical communication between glucose oxidase and electrodes mediated by phenothiazine-labeled poly(ethylene oxide) bonded to lysine residues on the enzyme surface

A series of glucose oxidase (GOx) hybrids (GOx-phe-nothiazine-labeled poly(ethylene oxide) (PT-PEO)) capable of direct electrical communication with electrodes is synthesized by covalently modifying PT-PEO to lysine residues on the enzyme surface. The length of the PEO chain and the number of PT groups are systematically altered. After the PT-PEO modification, all the hybrids maintain more than 50% of enzyme activity relative to that of native GOx, although loss of the activity becomes greater with increasing PEO chain length. The catalytic current, i(cat), is observed at a potential more positive than 0.55 V after the addition of glucose, due to the intramolecular electron transfer (El) from reduced forms of flavin adenine dinucletide (FADH2/FADH) to PT+ that are electrogenerated at the electrode. The i(cat) value increases with the number of PT groups, indicating that most of the modified PT groups act as mediators. The magnitude of the i(cat) increase depends on the PEO chain length and reveals a maximum for PT-PEO with the molecular weight of 3,000. In contrast, the i(cat) is almost constant for GOx-2-(10-phenothiazyl)propionic acid (PT-PA) hybrids with more than two PT groups synthesized by covalently modifying PT-PA to surface lysines, indicating that only a few key PT groups function as mediators. The maximum rate constant (130 s(-1)) for the ET from FADH2/FADH to PT+ is obtained for the GOx hybrid modified with five PT-PEO groups with the molecular weight of 3,000.