曲折矩形槽波导慢波系统的高频特性

对曲折矩形槽波导新型慢波系统的高频特性进行了研究，通过理论分析和数值计算，得到了它的色散曲线和耦合阻抗，并分析了结构参数变化时对色散特性和耦合阻抗的影响。曲折矩形槽波导结合了曲折波导散热能力强、色散特性好、容易加工和矩形槽波导单模工作、低损耗、大尺寸等优点，因此这种新型的慢波系统有可能在毫米波及亚毫米波段的行波管中具有较好的发展前景。     

A New Circular Groove Guide Analysis

Using the Fourier transform and the mode matching technique, the circular groove guide is analyzed. While deriving a series of simultaneous equations basing on boundary conditions, we get the characteristic equation of this guide structure that is strict than those before. The numerical result shows that the approach presented in this paper has a good precision.     

圆形槽波导振荡器的分析与设计

圆形槽波导是一种新型的毫米波传输线，具有低损耗、低色散、宽频带、大尺寸和大功率容量等优点．利用圆形槽波导来制作振荡器是圆形槽波导实用化道路上的一大进步。本文用FDTD方法来计算振荡器结构尺寸的变化对外电路阻抗的影响，从而寻找最佳匹配尺寸，设计了3mm波段圆形槽波导振荡器，并给出了实验结果。     

Leaky Characteristics of Modified NRD Guide with Finite Parallel Plate Length

Leaky wave characteristics of modified NRD (Nonradiative Dielectric) guide with parallel plate length are systemically investigated. A technique is used to investigate the leaky property of the guide structure, whichis formulated by effectively combining the multimode network theory with the mode-matching method. In the paper, two phenomena are carefully studied: First, the asymmetric position of the dielectric rod generates a leaky hybrid mode that could produce cross talk between components of the circuit. Second, when the length of metallic plate is finite, another type of leaky mode creates which influences and even couples to the normal leaky guide mode under appropriate circumstances.     

Analysis of Loss and Dispersion Characteristics for Groove Guides with Arbitrary Groove Profiles by an Equivalent Active Transmission Line Method*

Loss and dispersion characteristics of groove guide are two practically important factors in the design for millimeter wave system consisting of groove guide. In this paper, a new method is presented for analyzing loss and dispersion characteristics of the groove guides with arbitrary groove cross-sections. The method is based on the combination of an equivalent active transmission line equation and the staircase approximation. Numerical results of dispersion and attenuation properties for some groove guides with different groove profiles are given. The effectiveness and practicality of the present analysis are confirmed by the data given in the literature.     

部分介质填充槽波导色散特性的网络分析

本文给出了部分介质填充单槽和非对称双槽波导的横向等效网络。以此为基础,用微波网络方法分析了各种槽波导的色散特性,并将所得到的数据与用其它方法得到的结果进行比较,两者吻合好。证实本方法在保持有高的计算精度的情况下极大地简化了分析和求解过程。文中通过对宽带槽波导定向耦合器的具体设计,证明了本方法在槽波导电路分析和设计中的重要实际意义。     

圆形槽波导的􀀂 FDTD 分析

圆形槽波导^[1]是一种新型的宽频带、大功率，低损耗和大尺寸波导结构，在毫米波、亚毫米波波段有重要应用前景。利用时域有限差分法（FDTD）分析了圆形皮导的传输特性，计算了圆形槽波导工作在主模TE^[1]11情况下的色散曲线和截止频率，并与已知的理论值相比较，两者一致性好。     

应用广义阻抗边界条件分析介质填充凹槽波导的散射

本文应用广义阻抗边界条件研究了二维平板结构上介质填充凹槽的散射特性。通过选择合适的系数，广义阻抗边界条件可以模拟槽内任何特征的材料．将凹槽内的介质填充层由其表面上的简单边界条件来替代，所得的积分公式可用CGFFT法求解，且对任意入射角的表面散射场能作出精确的预估。     

The Analysis of Post-Mount in W-Band Circular Groove Guide

Finite-difference time-domain (FDTD) method is used to calculate the driving-point impedance of the circular groove guide diode mount. A simple way is proposed to approximate the curvilinear metal boundary of circular groove guide. Discrete equations are obtained from the Ampere's law and Faraday's law. Perfectly matched layer (PML) is applied on the open boundary of circular groove guide. At last program is made to obtain the field components. The driving-point impedance can be achieved from the ratio of the Fourier transform of the voltage and the Fourier transform of the current. The cutoff frequency and field pattern of the dominant mode are also obtained with well agreement with the theoretical results, this verifies the validity of the FDTD program.     

忆阻器网络等效分析电路及其特性研究

随着忆阻器理论研究的不断深入和圆满实现,加上其独特的物理性质,其应用前景将非常乐观。该文提出了忆阻器有P型和N型两种,对其物理性质进行了分析研究,得出了它们具有对偶特征。基于此,忆阻器间可以通过适当的连接和参数选择,对外呈现出线性特性,而各自仍具备忆阻器的固有属性。同时,给出了忆阻器及其串并联的一种等效分析电路拓扑结构,仿真结果表明,该方法有效、结论正确,从而为忆阻器的理论和应用研究,特别是忆阻器网路的构建开辟了新途径。     

Nonlinear Analysis on FEM Amplifier with Circular Groove Guide

FEM amplifier with a novel circular groove guide is proposed and researched both in three-dimensional nonlinear theory and numerical computation in this paper. Efficiency and bandwidth of the FEM are studied including electron beam emittance.     

A Systematic Investigation on Leaky Characteristics for NRD Guide with Arbitrary Profile of Cross-Section

The leaky characteristics of the NRD guide with arbitarary profile of cross section are systematically studied by a method which combines staircase approximation with multimode network theory and mode-matching procedure. Emphasis is laid on the investigation of the effect of the different profile dimensions on the leakage characteristics of the NRD guide. Extensive numerical results are given to establish useful guidelines for the design of some new types of NRD guide leaky wave antennas.     

An Active Transmission Line Solution for Loss Characteristics of the Groove Guide

The analysis of loss characteristics for groove guide is one of the most practically important problems in millimeter wave system consisting of groove guide. In this paper, the calculation of the skin loss for the modes in the groove guide is ended to the solution of an active equivalent transmission line equation. The effectiveness and the reliability of the present method are verified by comparison between the present results and those given in the literature.     

The Analysis of Radial Transmission-Line in W-Band Circular Groove Guide

In this paper, finite-difference time-domain (FDTD) method is used to calculate the driving-point impedance of radial transmission-line in circular groove guide. A simple way is used to approximate the curvilinear metal boundary of circular groove guide. And perfectly matched layer (PML) is applied on the open boundary of circular groove guide. Fine-grid is used to calculate the EM fields in the radial transmission-line in which we are interest. Discretized wave equation is used to update the tangential electric field on the boundary of coarse- and fine-grid. At last, the driving-point impedances related to different diameter of the radial transmission-line are obtained from the ratio of the Fourier transform of the voltage to the Fourier transform of the current.     

Finite Element Analysis of Field Pattern in Multiple Groove Guide

Rectangular groove guide with multiple grooves has been analyzed by finite element method (FEM) in this paper. The electrical field patterns of the dominant mode and the first higher-order TE mode have been presented for groove guide with single-, double-, triple-, and quadruple-rectangular grooves. The electromagnetic field of the dominant mode is distributed with a concentration in the groove regions, while the electromagnetic field of the first higher-order TE mode is mainly distributed in regions between grooves. The low loss characteristic has been found not only in single-groove guide, but also in multiple groove guide.     

平面扇形天线的宽带特性分析

从电流分布和输入阻抗方面对平面扇形天线特性进行了描述,并具体分析了对称结构和非对称结构平面扇形天线的宽带特性。     

非对称单脊波导裂缝阵天线分析

将Ｅｌｌｉｏｔｔ关于矩形波导缝阵理论推广运用到非对称单脊波导裂缝阵天线上，在考虑了裂缝外部互耦影响的情况下，给出相应的两个设计方程，同时给出８单元谐振裂缝线阵的具体计算和设计方法。加工样品的近场和远场测试结果证明了本文理论和设计方法是正确有效的。     

非对称带状线不连续性等效电路分析

非对称带状线广泛应用于LTCC微波集成电路系统(MICs)中。首次成功地将微带线不连续性等效电路模型移植到非对称带状线中,分析了其几种不同形式的不连续性,诸如开路端、阶梯、直角拐角和T形结。与数值分析结果相比,其S参数的平均误差均小于2%。     

新型NRD波导漏波天线特性分析

本文利用多模网络理论结合模匹配技术对任意横截面NRD波导漏波天线的辐射特性作了系统的分析,这些天线可以作为低成本的实用天线应用在毫米波系统中.文中着重研究了结构参数的变化对天线辐射特性的影响.这些计算结果对这类新型漏波天线的设计和确定NRD波导作为传输结构时的制作容差有重要的指导意义.     

Finite Element Analysis of the Dominant Mode Variation in Groove Guide

In this paper, the dominant mode in groove guide is analyzed by finite element method. For the guide with a shallow groove, the electric field lines (abbreviated as E lines) are perpendicular to the parallel plate, which is different from the literatures, and the dominant mode distribution is irrelevant to the groove width; for the guide with a narrow but deeper groove, the E lines are parallel to the plate region, which represents the characteristics of lower attenuation, for the guide with a deeper and wider groove, a complicated E lines are obtained. These results reveal that the dominant mode distribution in groove guide is varied, which replenish our understanding of groove guide, and the results have important values in design, manufacture, and application of groove guide.