Electrochemical assembly of [Ru(bpy)<Subscript>2</Subscript>tatp]<Superscript>2+</Superscript> associated with surfactants on the MWNTs/GC electrode

The electrochemical assembly of [Ru(bpy)₂tatp]²⁺ (where bpy = 2,2′-bipyridine, tatp = 1,4,8,9-tetra-aza-triphenylene) on the multi-walled carbon nanotubes-modified glassy carbon electrode (MWNTs/GC) in the presence of anionic and cationic surfactants has been investigated. A diffusion-controlled wave and three prewaves are exhibited on the differential pulse voltammogram of [Ru(bpy)₂tatp]²⁺. The formal potential of the prewaves is found to be much negative than that of the diffusion-controlled wave. An appropriate amount of anionic surfactants including dihexadecyl phosphate (DHP) and deoxyribonucleic acid (DNA) can prompt the assembly of [Ru(bpy)₂tatp]²⁺ on the MWNTs/GC electrode by using the method of repetitive voltammetric sweeping. In contrast, cationic surfactant such as hexadecyl trismethyl ammonium chrolide (HTAC) dispersed on the MWNTs surface is found to inhibit the assembly of [Ru(bpy)₂tatp]²⁺. Meanwhile, the assembled principle of [Ru(bpy)₂tatp]²⁺ on the MWNTs/GC electrode with the participation of surfactants is discussed in detail.     

Mediated oxidation of guanine by [Ru(bpy)2dpp] and their electrochemical assembly on the ITO electrode

Electrochemical oxidation of guanine mediated by [Ru(bpy)₂dpp]²⁺ (where bpy = 2,2′-bipyridine, dpp = 2,3-bis (2-pyridyl) pyrazine) and their electrochemical assembly at an ITO electrode prompted by guanine have been investigated with cyclic voltammetry and differential pulse voltammetry. It is found that [Ru(bpy)₂dpp]²⁺ can serve as an excellent mediator to induce the oxidation of guanine, and the mediated peak currents increase linearly with the rise of guanine concentration in the range from 0.01 to 0.20 mmol L⁻¹. Interestingly, with the increase of repetitive voltammetric sweeping numbers, [Ru(bpy)₂dpp]^3+/2+ can be assembled onto the ITO electrode and guanine has the ability to enhance the peak currents of prewaves. Also, with the rise of guanine concentration from 0.01 to 0.15 mmol L⁻¹, the peak currents of prewaves increase gradually. Meanwhile, the mediated mechanism of guanine oxidation by [Ru(bpy)₂dpp]²⁺ and the assembled process of [Ru(bpy)₂dpp]^3+/2+ on the ITO surface in the presence of guanine are discussed in detail.     

Characterization of electrochemiluminescence of tris(2,2′-bipyridine)ruthenium(II) with glyphosate as coreactant in aqueous solution

Glyphosate, a phosphorus-containing amino acid type herbicide was used as a coreactant for studying of electrochemiluminescence (ECL) reaction of tris(2,2′-bipyridyl)ruthenium(II) [Ru(bpy)₃²⁺] in an aqueous solution. In a phosphate buffer solution of pH 8, glyphosate itself was known to be electrochemically inactive at glassy carbon electrode, however, it participated in a homogeneous chemical reaction with the electrogenerated Ru(bpy)₃³⁺, and resulted in producing Ru(bpy)₃²⁺ species at the electrode surface. Kinetic and mechanistic information for the catalysis of glyphosate oxidation were evaluated by the steady-state voltammetric measurement with an ultramicroelectrode. The simulated cyclic voltammogram based on this mechanism was in good agreement with that obtained experimentally. ECL reaction of Ru(bpy)₃²⁺/glyphosate system was found to be strongly dependent on the media pH. In a pH region of 5-9, an ECL wave appeared at ca. +1.1 V vs. Ag/AgCl, which was caused by the generation of *Ru(bpy)₃²⁺ via a Ru(bpy)₃³⁺-mediated oxidation of glyphosate. When pH >10, a second ECL wave was observed at ca. +1.35 V vs. Ag/AgCl, which was believed to be associated with a reaction between Ru(bpy)₃³⁺ and the species from direct oxidation of GLYP at a GC electrode surface.     

Electrochemical fabrication and potential-enhanced luminescence of [Ru(bpy)2tatp] incorporating DNA-stabilized single-wall carbon nanotubes on an indium tin oxide electrode

A simple method was developed for the preparation of [Ru(bpy)₂tatp]²⁺-based aggregates (where bpy = 2,2′-bipyridine, tatp = 1,4,8,9-tetra-aza-triphenylene) on an indium tin oxide (ITO) electrode in the presence of DNA-stabilized single-walled carbon nanotubes (DNA–SWCNTs). The presence of SWCNTs in the concentration range from 0.02 to 0.125 g L⁻¹ dispersed with 0.25 mmol L⁻¹ DNA was found to promote the immobilization of [Ru(bpy)₂tatp]²⁺ on the ITO electrode by the method of repetitive voltammetric sweeping. The photoluminescence of [Ru(bpy)₂tatp]²⁺ incorporating DNA–SWCNTs both in solution and on the ITO electrode was systematically investigated by emission spectra and fluorescence microscopic imaging. An excess amount of SWCNTs can quench the photoluminescence of [Ru(bpy)₂tatp]²⁺ enhanced by DNA. The anodic potentials combined with CW green laser via an optical microscope was found to significantly increase the emission intensity of [Ru(bpy)₂tatp]²⁺–DNA–SWCNTs aggregates on the ITO electrode. In addition, the electrochemical fabrication and photoluminescence principles of [Ru(bpy)₂tatp]²⁺–DNA–SWCNTs aggregates on the ITO electrode tuned by the external electric fields were discussed in detail.     

Preparation and chemical properties of π-conjugated poly(1,10-phenanthroline-3,8-diyl)s with crown ether subunits

π-Conjugated polymers consisting of 1,10-phenanthroline units and crown ether subunits (Poly-1, Poly-2, and Poly-3) were prepared by dehalogenation polycondensation of the corresponding dibromo monomers using a zero-valent nickel complex as a condensing agent. They were characterized by elemental analysis, ¹H NMR and UV–Vis spectroscopies, and cyclic voltammetry (CV). They were partly soluble in CHCl₃, and the number average molecular weight of the soluble part of Poly-2, which had 15-crown-5 subunits, was estimated to be 5300. The polymers exhibited UV–Vis peaks at approximately λ_max = 360 nm, which was reasonable. Complexation with [Ru(bpy)₂]²⁺ and alkaline metal ions made the polymer soluble in organic solvents. The complexation of [Ru(bpy)₂]²⁺ to the 1,10-phenanthroline unit proceeded quantitatively, and the [Ru(bpy)₂]²⁺ complexes exhibited CV curves characteristic of [Ru(N-N)₃]²⁺ complexes.     

Influencing factors on electrochromic hysteresis performance of ruthenium purple produced by a WO3/Tris(2,2′-bipyridine)ruthenium(II)/polymer hybrid film

A [Ru(bpy)₃]²⁺ (bpy = 2,2′-bipyridine)/WO₃ hybrid (denoted as Ru-WO₃) film was prepared as a base layer on an indium tin oxide electrode by electrodeposition from a colloidal solution containing peroxotungstic acid, [Ru(bpy)₃]²⁺ and poly(sodium 4-styrenesulfonate). A ruthenium purple (RP, Fe^III₄[Ru^II(CN)₆]₃, denoted as Fe^III-Ru^II) layer was electrodeposited on a neat WO₃ film or a Ru-WO₃ film from an aqueous RP colloid solution to yield a WO₃/RP bilayer film or a Ru-WO₃/RP bilayer film, respectively. The spectrocyclic voltammetry measurement reveals that Fe^II-Ru^II is oxidized to Fe^III-Ru^II by a geared reaction of [Ru(bpy)₃]^2+/3+ and Fe^III-Ru^II is reduced by a geared reaction of H_xWO₃/WO₃ in the Ru-WO₃/RP film. These geared reactions produced electrochromic hysteresis of the RP layer. However, the absorbance change in the hysteresis was smaller than that for the Ru-WO₃/Prussian blue bilayer film reported previously, resulting from the lower electroactivities of any redox component for the Ru-WO₃/RP film. The lower electroactivities could be explained by the specific interface between the Ru-WO₃ and RP layers. It might contribute to either an increase of the interfacial resistance between the Ru-WO₃ and RP layers, or formation of the physically precise interface between the layers to make it difficult for counter ions to be transported in the interfacial liquid phase involved in the redox reactions in the film. The specific interface at the Ru-WO₃ and RP layers could be formed possibly by the electrostatic interaction between [Ru(bpy)₃]²⁺ and terminal [Ru(CN)₆]⁴⁻ moieties of RP. It could be suggested by the decreased redox potential of [Ru(bpy)₃]²⁺ in the Ru-WO₃ layer from 1.03 to 0.61 V by formation of the RP layer.     

Controlled Synthesis of BaYF<Subscript>5</Subscript>:Er<Superscript>3+</Superscript>, Yb<Superscript>3+</Superscript> with Different Morphology for the Enhancement of Upconversion Luminescence

In this work, Er³⁺/Yb³⁺-codoped BaYF₅ with different sizes and shapes have been synthesized by a simple solvothermal method. By changing the fluoride source, pH value, solvent, surfactants, Yb³⁺ concentration, temperature, and reaction time, the optimum synthetic conditions of BaYF₅:Er³⁺, Yb³⁺ were found to improve the upconversion luminescent properties. It is found that the emission intensity of green and red light is enhanced for several times by the way of using NaBF₄ as a fluoride source with the comparison of NH₄F and NaF. Moreover, the effects of different surfactants are not the same. Adding 5% polyetherimide (PEI) as surfactant can also improve the upconversion emission. On the contrary, when sodium citrate (CIT) as another surfactant was used to add, the sizes of the nanocrystals were gradually increased and the luminous properties also declined.     

Preparation and electrochemical performance of Li-rich layered cathode material,Li[Ni<Subscript>0.2</Subscript>Li<Subscript>0.2</Subscript>Mn<Subscript>0.6</Subscript>]O<Subscript>2</Subscript>, for lithium-ion batteries

The Li-rich layered cathode material, Li[Ni_0.2Li_0.2Mn_0.6]O₂, was synthesized via a “mixed oxalate” method, and its structural and electrochemical properties were compared with the same material synthesized by the sol–gel method. X-ray diffraction (XRD) shows that the synthesized powders have a layered O₃–LiCoO₂-type structure with the R-3m symmetry. X-ray photoelectron spectroscopy (XPS) indicates that in the above material, Ni and Mn exist in the oxidation states of +2 and +4, respectively. The layered material exhibits an excellent electrochemical performance. Its discharge capacity increases gradually from the initial value of 228 mA hg⁻¹ to a stable capacity of over 260 mA hg⁻¹ after the 10th cycle. It delivers a larger capacity of 258 mA hg⁻¹ at the 30th cycle. The dQ/dV curves suggest that the increasing capacity results from the redox-reaction of Mn⁴⁺/Mn³⁺.     

Catalytic oxidation of styrene by manganese(II) bipyridine complex cations immobilized in mesoporous Al-MCM-41

Manganese 2,2'-bipyridine (bpy) complex cations, [Mn(bpy)₂]²⁺, have been immobilized in mesoporous Al-MCM-41 (Si/Al=9) and used as a catalyst for the oxidation of styrene by iodosylbenzene, H₂O₂ and tert-butyl hydroperoxide (TBHP). The oxidation products included epoxide, diol and aldehyde. Al-MCM-41-immobilized [Mn(bpy)₂]²⁺ exhibited a higher catalytic activity for styrene oxidation than the corresponding homogeneous catalyst and showed no significant loss of catalytic activity when recycled. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effects of adding B<Subscript>2</Subscript>O<Subscript>3</Subscript> as a flux on phosphorescent properties in synthesis of SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>: (Eu<Superscript>2+</Superscript>, DY<Superscript>3+</Superscript> phosphor

SrAl₂O₄: (Eu²⁺, Dy³⁺) phosphor was prepared by solid state reaction. B₂O₅ as a flux was added in SrAl₂O₄:(Eu ²⁺, Dy³⁺) in order to accelerate a solid state reaction. In this paper, the effects of B₂O₃ on the crystal structure and the phosphorescent properties of the material have been evaluated. The synthesized phosphor exhibited a broad band emission spectrum peaking at 520 nm, and the spectrum peak showed little effect by the B₂O₃ contents. The maximum afterglow intensity of the SrAl₂O₄: (Eu²⁺, Dy³⁺) phosphor was obtained at the B₂O₃ content of 5%. Adding the B₂O₃ caused uniform distortion to the crystal structure of the phosphor and resulted in reducing the lengths of a and c axes and Β angle of the SrAl₂O₄ crystal. The uniform distortion was accompanied with crystal defects which can trap the holes generated by the excitation of Eu²⁺ ions. The afterglow characteristic of the SrAl₂O₄: (Eu²⁺, Dy³⁺) phosphor was thus enhanced.     

DNA-promoted electrochemical assembly of [Ru(bpy)2IP] at an ITO electrode

A controllable assembly technique of [Ru(bpy)₂IP]^3+/2+ (where bpy = 2,2′-bipyridine and IP = imidazo[4,5,f][1,10]phenanthroline) promoted by calf thymus DNA at an ITO electrode is proposed. The stable assembled layer containing [Ru(bpy)₂IP]^3+/2+ and double stranded DNA is obtained on the ITO electrode using repetitive voltammetric sweeping, confirmed by ex situ voltammetry, X-ray photoelectron spectroscopy (XPS) and the inverted fluorescence microscopy. There exist two pairs of diffusion-controlled waves and two pairs of prewaves for [Ru(bpy)₂IP]²⁺ in the voltammetric sweeping process. The half-wave potentials of the prewaves are far more negative than those of the diffusion-controlled waves. These experimental results suggest that double stranded DNA is enable to accelerate and increase the controllable assembly of Ru(bpy)₂IP]^3+/2+ by using the ITO surface. The fluorescence microscopy imaging reveals that [Ru(bpy)₂IP]^3+/2+ has the ability to bind with double strand DNA. The fluorescence intensity of [Ru(bpy)₂IP]^3+/2+ with DNA is stronger than that without DNA.     

Catalytic performance of CuCl<Subscript>2</Subscript>-modified V<Subscript>2</Subscript>O<Subscript>5</Subscript>-WO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> catalyst for Hg<Superscript>0</Superscript> oxidation in simulated flue gas

CuCl₂-SCR catalysts prepared by an improved impregnation method were studied to evaluate the catalytic performance for gaseous elemental mercury (Hg⁰) oxidation in simulated flue gas. Hg⁰ oxidation activity of commercial SCR catalyst was significantly improved by the introduction of CuCl₂. Nitrogen adsorption, XRD, XRF and XPS were used to characterize the catalysts. The results indicated that CuCl₂ was well loaded and highly dispersed on the catalyst surface, and that CuCl₂ played an important role for Hg⁰ catalytic oxidation. The effects of individual flue gas components on Hg⁰ oxidation were also investigated over CuCl₂-SCR catalyst at 350 oC. The co-presence of NO and NH₃ remarkably inhibited Hg⁰ oxidation, while this inhibiting effect was gradually scavenged with the decrease of GHSV. Further study revealed the possibility of simultaneous removal of Hg⁰ and NO over CuCl₂-SCR catalyst in simulated flue gas. The mechanism of Hg⁰ oxidation was also investigated.     

Visible up-conversion luminescence of CaWO<Subscript>4</Subscript>: Er<Superscript>3+</Superscript>,Yb<Superscript>3+</Superscript> and emission enhancement by tri-doping of Li<Superscript>+</Superscript> ions

Er³⁺,Yb³⁺ co-doped CaWO₄ polycrystalline powders were prepared by a solid-state reaction and their up-conversion (UC) luminescence properties were investigated in detail. Under 980 nm laser excitation, CaWO₄: Er³⁺,Yb³⁺ powder exhibited green UC emission peaks at 530 and 550 nm, which were due to the transitions of Er³⁺ (²H_11/2)→Er³⁺ (⁴I_15/2) and Er³⁺ (⁴S_3/2)→Er³⁺ (⁴I_15/2), respectively. Effects of Li+ tri-doping into CaWO₄: Er³⁺,Yb³⁺ were investigated. The introduction of Li⁺ ions reduced the optimum calcinations temperature about 100 °C by a liquid-phase sintering process and the UC emission intensity was remarkably enhanced by Li⁺ ions, which could be attributed to the lowering of the symmetry of the crystal field around Er³⁺ ions.     

DNA-enhanced assembly of [Ru(bpy)2ITATP] on an ITO electrode

A novel technique for controllable assembly of [Ru(bpy)₂ITATP]^3+/2+ (where bpy = 2,2′-bipyridine, ITATP = isatino[1,2-b]-1,4,8,9-tetraazatriphenylene) on an ITO electrode in the absence and presence of calf thymus DNA is proposed. The [Ru(bpy)₂ITATP]^3+/2+ and double stranded DNA is assembled onto the ITO electrode using repetitive voltammetric sweeping. The assembly is confirmed by ex situ cyclic voltammetry and the fluorescence microscopy. A pair of diffusion-controlled waves and prewaves for [Ru(bpy)₂ITATP]^3+/2+ is observed in the voltammetric sweeping process. The formal potential of the prewaves is found to be much negative than that of the diffusion-controlled waves. The controllable assembly of [Ru(bpy)₂ITATP]^3+/2+ on the ITO surface is accelerated by DNA and affected by ionic strength. With this DNA-prompted electrochemical technique, a multifunctional biomolecular film containing surface-confined redox center of controllable thickness is fabricated.     

Synthesis and structural refinement of fully dehydrated fully Zn<Superscript>2+</Superscript>-exchanged zeolite Y (FAU), |Zn<Subscript>35.5</Subscript>|[Si<Subscript>121</Subscript>Al<Subscript>71</Subscript>O<Subscript>384</Subscript>]-FAU

The single-crystal structure of |Zn_35.5|[Si₁₂₁Al₇₁O₃₈₄]-FAU per unit cell, a = 24.794(1), dehydrated at 673 K and 1 × 10^?6 Torr, has been determined by single-crystal X-ray diffraction techniques in the space group \( Fd\bar{3}m \) at 294(1) K. The structure was refined using all intensities to the final error indices (using the 930 reflections for which F _o > 4σ(F _o)) R ₁ = 0.0448 (based on F) and wR ₂ = 0.1545 (based on F ²). About 35.5 Zn²⁺ ions per unit cell are found at an unusually large number of crystallographic distinct positions, six. The 0.5 Zn²⁺ ion per unit cell is located at the center of double 6-ring (D6R, site I; Zn(I)-O(3) = 2.642(3) Å and O(3)-Zn(I)-O(3) = 81.23(12) and 98.77(12)°). Two different site-I′ positions (in the sodalite cavities opposite D6Rs) are occupied by 14 and 3 Zn²⁺ ions per unit cell, respectively; these Zn²⁺ ions are recessed 0.67 Å and 1.02 Å, respectively, into the sodalite cavities from their 3-oxygens plane (Zn(I′a)-O(3) = 2.094(3) Å, Zn(I′b)-O(3) = 2.23(5) Å, O(3)-Zn(I′a)-O(3) = 110.32(12)°, and O(3)-Zn(I′b)-O(3) = 100.9(30)°). Site-II′ positions (in the sodalite cavities opposite S6Rs) are occupied by 6 Zn²⁺ ions, each of which extends 0.63 Å into the sodalite cavities from their 3-oxygens plane (Zn(II′)-O(2) = 2.164(3) Å and O(2)-Zn(II′)-O(2) = 112.00(12)°). Twelve Zn²⁺ ions are found at two nonequivalent sites II (in the supercage) with occupancies of 7 and 5 ions, respectively; these Zn²⁺ ions are recessed 0.52 Å and 0.96 Å, respectively, into the supercage from their 3-oxygens plane (Zn(IIa)-O(2) = 2.138(12) Å, Zn(IIb)-O(2) = 2.28(4) Å, O(2)-Zn(IIa)-O(2) = 114.2(10)°, and O(2)-Zn(IIb)-O(2) = 103.7(25)°).     

Synthesis,Characterization and Properties of One-dimensional Complexes of <Emphasis Type="Italic">cis-syn-cis</Emphasis>-Dicyclohexyl-18-crown-6 with K<Subscript>2</Subscript>[M(mnt)<Subscript>2</Subscript>] (M==Ni,Pd, Pt)

Three complexes [K(DC18C6-A)]₂[M(mnt)₂] (DC18C6-A=cis-syn-cis-dicyclohexyl-18-crown-6, isomer A; M=Ni, 1; Pd, 2; Pt, 3; mnt = 1,2-dicyanoethene-1,2-dithiolate, maleonitriledithiolate, [C₂S₂(CN)₂]²⁻) have been synthesized and characterized by elementary analysis, UV–vis, FT-IR spectroscopy and X-ray single crystal diffraction. They are isomorphous and all display infinite one-dimensional chain-like structure formed by [K(DC18C6-A)]⁺ complex cations and [M(mnt)₂]²⁻ (M=Ni, Pd, Pt) complex anions through K–N interactions. Thermal analysis indicates that three complexes are all thermal stable under 260 °C and experience the same decomposition process of dissociation and evaporation of crown ether molecules. Their electrochemical behaviors have been studied by cyclic voltammetry.     

Roles of doping ions in persistent luminescence of SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>: Eu<Superscript>2+</Superscript>,<Emphasis Type="Italic">RE</Emphasis><Superscript>3+</Superscript> phosphors

The polycrystalline Eu²⁺ and Dy³⁺ codoped strontium aluminates SrAl₂O₄: Eu²⁺,Dy³⁺ were prepared by a solid-state reaction. The UV-excited photoluminescence, persistent luminescence, and thermoluminescence of the SrAl₂O₄: Eu²⁺,Dy³⁺ phosphors with different compositions and ion doping was studied and compared. The results showed that the Eu²⁺ ion doped in SrAl₂O₄: Eu²⁺,Dy³⁺ phosphors is not only the UV-excited luminescent center but also the persistent luminescent center. The Dy³⁺ ion introduced into SrAl₂O₄: Eu²⁺ crystal matrix can hardly yield any luminescence under UV excitation but acts as an electron trap with a suitable depth for persistent luminescence. The Dy³⁺ codoping would effectively enhance the persistent luminescence and thermoluminescence. Different codoping RE ³⁺ ions have a different effect on persistent luminescence. Only the RE ³⁺ ions (for example, Dy³⁺ and Nd³⁺), which have suitable optical electronegativity, can form suitable electron traps and effectively improve the persistent luminescence of SrAl₂O₄: Eu²⁺. Based on the above observations, a persistent luminescence mechanism, electron transfer model, was proposed and illustrated. The text was submitted by the authors in English.     

Crystal structure of Pb<Subscript>6</Subscript>O[(Si<Subscript>6</Subscript>Al<Subscript>2</Subscript>)O<Subscript>20</Subscript>]

The crystal structure of Pb₆O[(Si₆Al₂)O₂₀)] is investigated using X-ray diffraction. The compound has tetragonal symmetry, space group I4/mmm, a = 11.7162(10) Å, c = 8.0435(12) Å, and V = 1104.13(2) ų. The structure is refined to R ₁ = 0.036 for 562 unique reflections with [F ₀] ≥ 4σF. The structure contains two symmetrically independent positions of the Pb²⁺ cations coordinated by five O atoms (Pb²⁺-O^2? = 2.34–2.68 Å). The TO₄ tetrahedra (T = Si, Al) form tubular [(Si₆Al₂)O₂₀] chains extended along the c axis. The O₄ oxygen atom is not bonded to the Si and Al atoms and is octahedrally coordinated by six Pb atoms with the formation of an oxo-centered OPb₆ octahedron. The assumption is made that, in some of lead silicate and aluminosilicate glasses, a number of oxygen atoms are located outside the tetrahedral structure and represent segregation centers of the Pb²⁺ cations due to the formation of oxo-centered complexes.     

Reaction and Surface Characterization Studies of Ru/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts for CO Preferential Oxidation in Reformed Gas

In order to investigate the reasons the activation of a Ru/Al₂O₃ catalyst by heating in a H₂/N₂ mixed gas improves the CO preferential oxidation (PROX) activity, the oxidation state of the Ru on the catalyst surface was studied by using ESCA. As the ratio of Ru(0) to total Ru on the surface was increased, the temperature window of the Ru catalyst, where CO was reduced to below 10 ppm, was expanded to the lower temperature side. The activity of CO oxidation by O₂ of the Ru catalyst at lower temperatures was improved by increasing the ratio of Ru(0). However, the selectivity for CO oxidation hardly varied with the change in the surface Ru(0) ratio at these low temperatures. It is considered that O₂ activation on Ru(0) plays an essential role in CO PROX activity on the Ru catalyst at low temperatures.     

Immobilization of H<Subscript>3</Subscript>PMo<Subscript>12</Subscript>O<Subscript>40</Subscript> catalyst on the nitrogen-containing mesoporous carbon and its application to the vapor-phase 2-propanol conversion reaction

Nitrogen-containing mesoporous carbon (N-MC) with high surface area (=1,115 m²/g) and large pore volume (=1.18 cm³/g) was synthesized by a templating method. The surface of N-MC was then modified to form a positive charge, and thus, to provide sites for the immobilization of [PMo₁₂O₄₀]³⁻. By taking advantage of the overall negative charge of [PMo₁₂O₄₀]³⁻, H3PMo₁₂O₄₀ (PMo₁₂) was chemically immobilized on the N-MC support as a charge matching component. It was found that the PMo₁₂/N-MC still retained relatively high surface area (=687 m²/g) and large pore volume (=0.67 cm³/g) even after the immobilization of PMo₁₂. It was also revealed that PMo₁₂ species were finely and molecularly dispersed on the N-MC support via chemical immobilization. In the vapor-phase 2-propanol conversion reaction, the PMo₁₂/N-MC showed a higher conversion than the unsupported PMo₁₂. Furthermore, the PMo₁₂/N-MC showed an enhanced oxidation catalytic activity and a suppressed acid catalytic activity compared to the unsupported PMo₁₂. This catalytic behavior of PMo₁₂/N-MC was due to the molecular dispersion of PMo₁₂ on the N-MC support formed via chemical immobilization by sacrificing the proton.