多处理器计算环境中基于能量节约的实时动态调度算法

当前处理器由于较高的能量消耗，导致处理器热量散发的提高及系统可靠性的降低，已经成为目前计算机领域较为关心的问题．然而目前一些有效降低能量消耗的技术大多针对单处理器系统，较少考虑多处理器系统．提出的调度算法针对多处理器计算环境，以执行时间最快的任务优先调度为基础，结合其它有效技术（共享空闲时间回收），使得实时任务在其截止期内完成的同时能够有效地减低整个系统的能量消耗．针对独立任务集及具有依赖关系的任务集，提出两种针对同构计算环境的算法：STFBA1（Shortest—Task—First—Based Algorithm）及STFBA2，及两钟针对多任务集的算法HSA1（Hybrid Seheduling Algorithm）及HAS2．在单任务集计算环境下，与目前所知的有效算法相比，算法具有更好的性能（调度长度及能量消耗）．在多任务集计算环境下，基于混合调度策略的算法能够明显改进调度性能．     

多处理器环境中基于节能及容错的实时动态调度算法

当前处理器由于较高的能量消耗,导致处理器热量散发的提高及系统可靠性的降低,同时任务实际运行中的错误也降低了系统的可靠性.因此同时满足节能性及容错性已经成为目前计算机领域较为关心的问题.提出的调度算法针对实时多处理器计算环境,以执行时间最短的任务优先调度为基础,结合其他有效技术(共享空闲时间回收及检查点技术),使得实时任务在其截止期内完成的同时,能够动态地降低整个系统的能量消耗及动态容错.针对独立任务集及具有依赖关系的任务集,提出两种算法:STFBA1及STFBA2(shortest task first based algorithm).通过实验与目前所知的有效算法相比,算法具有更好的性能(调度长度及能量消耗)及较低的通信时间复杂度.     

多处理器单调速率任务分配算法性能评价

多处理器任务分配调度算法是一类经典实时调度算法，然而目前研究在如何根据任务集特征选择任务分配算法方面少见指导性原则，不利于提高多处理器任务分配算法的可调度率及使用尽可能少的处理器达到最优调度结果。基于两种多处理器任务调度策略的比较，本文给出划分策略下的多处理器RM调度的可调度条件和任务分配算法夏分析。仿真结果表明，各任务分配算法所需处理器数与任务集总利用率成正比。同时，分析总结出各算法适用范围及如何根据任务集利用率选择合适算法的指导原则。最后结果还表明，实际算法性能与理论性能界存在差异。     

多处理器系统动态调度负载均衡节约算法

将任务集与处理器处理能力之间的匹配关系作为研究调度算法性能的重要因素,建立了相应的任务-处理器模型,以描述多处理器系统的负载状况.描述了多处理器系统任务可调度的必要条件,设计实现了任务集的生成方法.对节约算法进行改进,提出了负载均衡的节约算法.所提出的算法可在保证调度成功率的前提下,缩短任务的平均响应时间和调度长度,并均衡地提高处理器的利用率.     

开销敏感的多处理器最优节能实时调度算法

嵌入式多处理器系统的能耗问题变得日益重要,如何减少能耗同时满足实时约束成为多处理器系统节能实时调度中的一个重要问题.目前绝大多数研究基于关键速度降低处理器的频率以减少动态能耗,采用关闭处理器的方法减少静态能耗.虽然这种方法可以实现节能,但是不能保证最小化能耗.而现有最优的节能实时调度未考虑处理器状态切换的时间和能量开销,因此在切换开销不可忽视的实际平台中不再是最优的.文中针对具有独立动态电压频率调节和动态功耗管理功能的多处理器系统,考虑处理器切换开销,提出一种基于帧任务模型的最优节能实时调度算法.该算法根据关键速度来判断系统负载情况,确定具有最低能耗值的活跃处理器个数,然后根据状态切换开销来确定最优调度序列.该算法允许实时任务在处理器之间任意迁移,计算复杂度小,易于实现.数学分析证明了该算法的最优性.     

一种采用动态电压调整的实时节能调度算法

较高的能量消耗会导致处理器热量的增加及系统可靠性的降低,合理运用动态电压调整技术有效降低实时任务运行所需的能耗成为一个研究热点.提出一种动态实时节能调度算法MSF,以最大空闲时间优先调度为基础,结合动态调整技术,使得实时任务在其截止期内完成的同时能够最大限度地降低整个系统的能量消耗.实验结果表明, 该方法能够充分利用任务的不同能量特性和动态空闲时间,更有效的实现节能,优于其它算法.     

基于禁忌搜索的多处理器任务调度算法

为合理利用多处理器资源,对任务调度算法进行研究,针对现有任务调度算法在任务规模较大的情况下全局寻优能力方面的不足,提出基于禁忌搜索的多处理器任务调度算法。对任务图不设任何约束条件,利用基于任务复制的TDS算法产生高质量的初始调度以降低算法复杂度,利用禁忌搜索算法全局寻优得到最优调度。实验结果表明,该算法可以有效降低任务调度长度,减少所需处理器数目。     

基于分批优化的实时多处理器系统的集成动态调度算法

提出了一种基于分批优化的实时多处理器系统的集成动态调度算法，该算法采用在每次扩充当前局部调度时，通过对所选取的一批任务进行优化分配的策略以及软实时任务的服务质量QoS（quality of service）降级策略，以统一方式实现了对实时多处理器糸统中硬、软实时任务的集成动态调度．进行了大量的模拟研究，结果表明．在多种任务参数取值下，新算法的调度成功率均高于近视算法（Myopic Algorithm）．     

基于动态关键任务的多处理器任务分配算法

多处理器调度问题是影响系统性能的关键问题,基于任务复制的调度算法是解决多处理器调度问题较为有效的方法.文中分析了几个典型的基于任务复制算法,提出了基于动态关键任务(DCT)的多处理器任务分配算法.DCT算法以克服贪心算法不足为要点,调度过程中动态计算任务时间参数,准确确定处理器的关键任务,以关键任务为核心优化调度,逐步改善调度结果,最终取得最优的调度结果.分析和实验证明,DCT算法优于现有其它同类算法.     

Xen中VCPU调度算法分析

为了降低虚拟化环境中虚拟机的性能开销,提高虚拟化实施效率,在综合考虑虚拟处理器在虚拟机调度过程中的需求的基础上,对Xen中基于信用度的调度算法进行了分析,该算法在处理器密集型应用、多处理器调度和QoS控制方面具有明显的优势.针对目前调度算法在多处理器和新型虚拟机监控器结构下存在的性能问题,提出了自旋锁优先和处理器绑定等优化措施.实例表明,该措施能够提高虚拟处理器的调度效率.     

Scheduling with dynamic voltage/speed adjustment using slack reclamation in multiprocessor real-time systems

The high power consumption of modern processors becomes a major concern because it leads to decreased mission duration (for battery-operated systems), increased heat dissipation, and decreased reliability. While many techniques have been proposed to reduce power consumption for uniprocessor systems, there has been considerably less work on multiprocessor systems. In this paper, based on the concept of slack sharing among processors, we propose two novel power-aware scheduling algorithms for task sets with and without precedence constraints executing on multiprocessor systems. These scheduling techniques reclaim the time unused by a task to reduce the execution speed of future tasks and, thus, reduce the total energy consumption of the system. We also study the effect of discrete voltage/speed levels on the energy savings for multiprocessor systems and propose a new scheme of slack reservation to incorporate voltage/speed adjustment overhead in the scheduling algorithms. Simulation and trace-based results indicate that our algorithms achieve substantial energy savings on systems with variable voltage processors. Moreover, processors with a few discrete voltage/speed levels obtain nearly the same energy savings as processors with continuous voltage/speed, and the effect of voltage/speed adjustment overhead on the energy savings is relatively small.     

Communication-aware task scheduling and voltage selection for total energy minimization in a multiprocessor system using Ant Colony Optimization

Energy consumption is a key parameter when highly computational tasks should be performed in a multiprocessor system. In this case, in order to reduce total energy consumption, task scheduling and low-power methodology should be combined in an efficient way. This paper proposes an algorithm for off-line communication-aware task scheduling and voltage selection using Ant Colony Optimization. The proposed algorithm minimizes total energy consumption of an application executing on a homogeneous multiprocessor system. The artificial agents explore the search space based on stochastic decision-making using global heuristic information with total energy consumption and local heuristic information with interprocessor communication volume. In search space exploration, both voltage selection and the dependencies between tasks are considered. The pheromone trails are updated by normalizing the total energy consumption. The pheromone trails represent the global heuristic information in order to utilize all entire energy consumption information from previous evaluated solutions. Experimental results show that the proposed algorithm outperforms traditional communication-aware task scheduling and task scheduling using genetic algorithms in terms of total energy consumption.     

A genetic algorithm for multiprocessor scheduling

The problem of multiprocessor scheduling can be stated as finding a schedule for a general task graph to be executed on a multiprocessor system so that the schedule length can be minimized. This scheduling problem is known to be NP-hard, and methods based on heuristic search have been proposed to obtain optimal and suboptimal solutions. Genetic algorithms have recently received much attention as a class of robust stochastic search algorithms for various optimization problems. In this paper, an efficient method based on genetic algorithms is developed to solve the multiprocessor scheduling problem. The representation of the search node is based on the order of the tasks being executed in each individual processor. The genetic operator proposed is based on the precedence relations between the tasks in the task graph. Simulation results comparing the proposed genetic algorithm, the list scheduling algorithm, and the optimal schedule using random task graphs, and a robot inverse dynamics computational task graph are presented     

容错多处理机中一种高效的实时调度算法

针对基于主副版本容错的多处理机中独立的、抢占性的硬实时任务,提出了一种高效的调度算法——TPFTRM(task partition based fault tolerant rate-monotonic)算法.该算法将单机实时RM 算法扩展到容错多处理机上,并且调度过程中从不使用主动执行的任务副版本,而仅使用被动执行和主副重叠方式执行的任务副版本,从而最大限度地利用副版本重叠和分离技术提高了算法调度性能.此外,TPFTRM 根据任务负载不同将任务集合划分成两个不相交的子集进行分配;还根据处理机调度的任务版本不同,将处理机集合划分成3 个不相交的子集进行调度,从而使TPFTRM 调度算法便于理解、实现以及减少了调度所需要的运行时间.模拟实验对各种具有不同周期和任务负载的任务集合进行了调度测试.实验结果表明,TPFTRM与目前所知同类算法相比,在调度相同参数的任务集合时不仅明显减少了调度所需要的处理机数目,还减少了调度所需要的运行时间,从而证实了TPFTRM 算法的高效性.     

Schedulability Analysis of Global Scheduling Algorithms on Multiprocessor Platforms

This paper addresses the schedulability problem of periodic and sporadic real-time task sets with constrained deadlines preemptively scheduled on a multiprocessor platform composed by identical processors. We assume that a global work-conserving scheduler is used and migration from one processor to another is allowed during a task lifetime. First, a general method to derive schedulability conditions for multiprocessor real-time systems will be presented. The analysis will be applied to two typical scheduling algorithms: earliest deadline first (EDF) and fixed priority (FP). Then, the derived schedulability conditions will be tightened, refining the analysis with a simple and effective technique that significantly improves the percentage of accepted task sets. The effectiveness of the proposed test is shown through an extensive set of synthetic experiments.     

Energy efficient scheduling of parallel tasks on multiprocessor computers

In this paper, scheduling parallel tasks on multiprocessor computers with dynamically variable voltage and speed are addressed as combinatorial optimization problems. Two problems are defined, namely, minimizing schedule length with energy consumption constraint and minimizing energy consumption with schedule length constraint. The first problem has applications in general multiprocessor and multicore processor computing systems where energy consumption is an important concern and in mobile computers where energy conservation is a main concern. The second problem has applications in real-time multiprocessing systems and environments where timing constraint is a major requirement. Our scheduling problems are defined such that the energy-delay product is optimized by fixing one factor and minimizing the other. It is noticed that power-aware scheduling of parallel tasks has rarely been discussed before. Our investigation in this paper makes some initial attempt to energy-efficient scheduling of parallel tasks on multiprocessor computers with dynamic voltage and speed. Our scheduling problems contain three nontrivial subproblems, namely, system partitioning, task scheduling, and power supplying. Each subproblem should be solved efficiently, so that heuristic algorithms with overall good performance can be developed. The above decomposition of our optimization problems into three subproblems makes design and analysis of heuristic algorithms tractable. A unique feature of our work is to compare the performance of our algorithms with optimal solutions analytically and validate our results experimentally, not to compare the performance of heuristic algorithms among themselves only experimentally. The harmonic system partitioning and processor allocation scheme is used, which divides a multiprocessor computer into clusters of equal sizes and schedules tasks of similar sizes together to increase processor utilization. A three-level energy/time/power allocation scheme is adopted for a given schedule, such that the schedule length is minimized by consuming given amount of energy or the energy consumed is minimized without missing a given deadline. The performance of our heuristic algorithms is analyzed, and accurate performance bounds are derived. Simulation data which validate our analytical results are also presented. It is found that our analytical results provide very accurate estimation of the expected normalized schedule length and the expected normalized energy consumption and that our heuristic algorithms are able to produce solutions very close to optimum.     

An efficient dynamic scheduling algorithm for multiprocessorreal-time systems

Many time-critical applications require predictable performance and tasks in these applications have deadlines to be met. In this paper, we propose an efficient algorithm for nonpreemptive scheduling of dynamically arriving real-time tasks (aperiodic tasks) in multiprocessor systems. A real-time task is characterized by its deadline, resource requirements, and worst case computation time on p processors, where p is the degree of parallelization of the task. We use this parallelism in tasks to meet their deadlines and, thus, obtain better schedulability compared to nonparallelizable task scheduling algorithms. To study the effectiveness of the proposed scheduling algorithm, we have conducted extensive simulation studies and compared its performance with the myopic scheduling algorithm. The simulation studies show that the schedulability of the proposed algorithm is always higher than that of the myopic algorithm for a wide variety of task parameters     

Energy efficient scheduling for real-time embedded systems with QoS guarantee

While the dynamic voltage scaling (DVS) techniques are efficient in reducing the dynamic energy consumption for the processor, varying voltage alone becomes less effective for the overall energy reduction as the static power is growing rapidly. On the other hand, Quality of Service (QoS) is also a primary concern in the development of today’s pervasive computing systems. In this paper, we propose a dynamic approach to minimize the overall energy consumption for soft real-time systems while ensuring the QoS-guarantee. The QoS requirements are deterministically quantified with the window-constraints, which require that at least m out of each non-overlapped window of k consecutive jobs of a task meet their deadlines. Necessary and sufficient conditions for checking the feasibility of task sets with arbitrary service times and periods are developed to ensure that the window-constraints can be guaranteed in the worst case. And efficient scheduling techniques based on pattern variation and dynamic slack reclaiming extensions are proposed to combine the task procrastination and dynamic slowdown to minimize the energy consumption. In contrast to the previous leakage-aware dynamic reclaiming work which never scales the job speed below the critical speed, we will show that it can be more energy efficient to reclaim the slack with speed lower than the critical speed when necessary. Through extensive simulations, our experiment results demonstrate that the proposed techniques significantly outperformed the previous research in both overall and idle energy reduction.