Structure, Thermal Behavior, Chemical Durability, and Optical Properties of the Na2O–Al2O3–TiO2–Nb2O5–P2O5 Glass System

The FTIR, Raman, UV-Vis, ³¹P MAS-NMR, DTA, and refractive index measurements have been combined to investigate a series of glasses with the general formula 20Na₂O–5Al₂O₃− x TiO₂–(45− x )Nb₂O₅–30P₂O₅, 15≤ x ≤45. The glass structure, as well as thermal, optical, and chemical durability properties, were then described as functions of the f _Nb/ f _Ti ratio. An increase of the f _Nb/ f _Ti ratio correlates with a decrease in length of the average phosphate chains linked through Nb–O–P and Ti–O–P bonds, with an increase in the glass stability and with increase in the linear refractive indices at 632.8 nm from 1.79 to 1.89. Furthermore, niobium is more effective than titanium in improving chemical durability.     

Phase Relations In The Pseudo-Ternary System La2O3–SrO–Fe2O3

The phase relations in the pseudo-ternary system La₂O₃–SrO–Fe₂O₃ have been investigated in air. Isothermal sections at 1100° and 1300°C are presented based on X-ray diffraction and thermal analysis of annealed samples. Extended solid solubility was observed for the compounds Sr _{n +1− v} La _v Fe _n O_{3 n +1−δ} ( n =1, 2, 3, and ∞) and Sr_{1− x} La _x Fe₁₂O₁₉, while only limited solubility of La in Sr_{4− z} La _z Fe₆O_13±δ was observed. At high Fe₂O₃ content, a liquid with low La₂O₃ content was stable at 1300°C.     

The System La2O3— TiO2; Phase Equilibria and Electrical Properties

Phase relations at liquidus temperatures in the system La₂O₃-TiO₂ were studied in air. The existence of two previously unreported compounds, La₂O₃. TiO₂ and 2La₂O₃-TiO₂, is postulated on the basis of X-ray and microscopic examination of crystalline samples, and in the case of La₂O₃.-TiO₂, on a maximum in the liquidus curve at that composition. Quenched liquids of the primary-phase field of rutile were found to be semiconducting. This property was related to oxygen loss from both liquid and crystalline phases and is discussed in the light of weight loss experiments, microscopic examination of quenched samples, and information obtained from the literature. Dielectric constant and loss factor of the compounds La₂O₃-TiO₂, La₂O₃-2TiO₂, and 2La₂O₃-9TiO₂ are reported at 1 Mc over the temperature range 25° to 500°C.     

Refractory α-SiAlON Containing La2O3

Refractory Y-α-SiAlON with elongated grain morphology was obtained by utilizing La₂O₃ as a densification aid, which resulted in excellent room-temperature and high-temperature strength. Room-temperature strength of 1000 MPa was achieved when La₂O₃ was augmented by adding Y₂O₃ or removing AlN. With only La₂O₃, a temperature-independent strength of 800–950 MPa was maintained up to 1100°C, then gradually decreasing by 25% when reaching 1300°C. The R-curve measurements of fracture toughness showed relatively little dependence on microstructure, consistent with a strong interface that suppresses grain boundary decohesion. Compared with other densification aids such as SiO₂, Al₂O₃, Sc₂O₃, Y₂O₃, and Lu₂O₃, a finer microstructure was obtained by using La₂O₃. High nitrogen content in the residual La–Si–Al–O–N glass in equilibrium with the nitrogen-rich α-SiAlON is suggested to be the cause of these findings.     

Ionic Conductivity Enhancement of La2Mo2−xWxO9 Nanocrystalline Films Deposited on Alumina Substrates by the Sol–Gel Method

Dense, crack-free, and uniform La₂Mo_{2− x} W _x O₉ ( x =0, 0.1, and 0.2) nanocrystalline films were successfully synthesized on poly-alumina substrates via a modified sol–gel method, with inorganic salt of La(NO₃)₃·6H₂O, (NH₄)₆Mo₇O₂₄·4H₂O, and (NH₄)₆H₂W₁₂O₂₄ as precursors. Pure La₂Mo₂O₉ phase was confirmed by X-ray diffractometer when the annealing temperature was >500°C. The average grain size of the La₂Mo_{2− x} W _x O₉ films is in the range of 90–400 nm, depending upon the conditions of thermal treatment, and the thickness of films can reach 1 μm by repetitive spin-coating. The electrical conductivity increases with decreasing grain size and reaches 0.074 S/cm at 600°C in the film with a grain size of 90 nm, which is one order of magnitude higher than that in the corresponding bulk materials. W-doping can suppress the phase transition that occurs at 580°C in pure La₂Mo₂O₉ and enhance the low-temperature ionic conductivity. Furthermore, the activation energy of conductivity in the nanocrystalline La₂Mo₂O₉ films decreases to about 0.6 eV in comparison with 1.0 eV in the bulk ones, which implies that the grain resistance prevails in the total resistance, when grain size reduces to nanometer domain.     

Effect of B2O3 Addition on the Thermal Properties and Structure of Bulk and Powdered Barium Phosphate Glasses

The glass transition temperature increases and the thermal expansion coefficient and density decrease with increasing B₂O₃ concentration in a series of (100− x )(50BaO–50P₂O₅)− x B₂O₃ where x =0–10 mol% for bulk samples. According to Raman spectroscopy, the bulk BaO–P₂O₅–B₂O₃ (BaP–B) glasses consist of metaphosphate Q ² units with ring-type metaborate, diborate, and PO₄–BO₄ groups. X-ray photoelectron spectroscopy results reveal qualitatively that P–O–B bonds are formed at the surface of BaP–B glass samples ground in laboratory air over 6 mol% B₂O₃ only. The P–O–B bonds are related to the suppression of the crystallization of powdered BaP–B glasses with >6 mol% B₂O₃ during differential thermal analysis.     

Phase Relations in the Pyrochlore-Rich Part of the Bi2O3−TiO2−Nd2O3 System

In this study we used solid-state synthesis to determine the phase relations in the pyrochlore-rich part of the Bi₂O₃−TiO₂−Nd₂O₃ system at 1100°C. The samples were analyzed using X-ray powder diffraction and scanning electron microscopy with energy- and wavelength-dispersive spectroscopy. A single-phase pyrochlore ceramic was obtained with the addition of 4.5 mol% of Nd₂O₃. We determined the solubility limits for the three solid solutions: (i) the pyrochlore solid solution Bi_{(1.6–1.08 x )}Nd _x Ti₂O_{(6.4+0.3 x )}, where 0.25< x <0.96; (ii) the solid solution Bi_{4− x} Nd _x Ti₃O₁₂, where 0< x <2.6; and (iii) the Nd_{2− x} Bi _x Ti₂O₇ solid solution, where 0< x <0.35. The determined phase relations in the pyrochlore-rich part are presented in a partial phase diagram of the Bi₂O₃−TiO₂−Nd₂O₃ system in air at 1100°C.     

Defect Structure and Electrical Properties of La1−ySryFe1−xAlxO3−δ

La_{1− y} Sr _y Fe_{1− x} Al _x O_3−δ perovskites were studied as potential materials for solid-oxide fuel cell (SOFC) cathodes. The phase relations in the LaFeO₃–SrFeO_3−δ–LaAlO₃ system were investigated by X-ray powder diffraction analysis. The defect structure of the La_{1− y} Sr _y Fe_{1− x} Al _x O_3−δ perovskites was investigated by Mössbauer spectroscopy and weight-loss analysis. Relations between the nonstoichiometry and the conductivity of the La_{1− y} Sr _y Fe_{1− x} Al _x O_3−δ perovskites were investigated. The incorporation of aluminum ( x ) into LaFe_{1− x} Al_xO₃ was found to have no influence on the defect structure but to decrease the conductivity. The incorporation of strontium ( y ) into La_{1− y} Sr _y Fe_{1− x} Al _x O_3−δ promotes the formation of anion vacancies and Fe⁴⁺ that lead to higher conductivity.     

Preparation of La2Zr2O7 by Sol—Gel Route

The La₂Zr₂O₇ phase was prepared from metal acetylacetonates by a sol—gel route without any intermediate phase formation. X-ray peaks appeared at a temperature as low as 500°C at the positions expected for La₂Zr₂O₇, although they were broad. The crystal structure of La₂Zr₂O₇ was found to be of the fluorite type below 900°C and of thepyrochlore type above 1000°C. The substitution of a small amount of Eu for La was carried out to investigate the crystal structure from the viewpoint of fluorescence, and these results confirmed the formation of fluorite type La₂Zr₂O₇ below 900°C.     

Subsolidus Phase Relationships in the Ga2O3–Al2O3–TiO2 System

Subsolidus phase relationships in the Ga₂O₃–Al₂O₃–TiO₂ system at 1400°C were studied using X-ray diffraction. Phases present in the pseudoternary system include TiO₂ (rutile), Ga_{2−2 x} Al_{2 x} O₃ ( x ≤0.78 β-gallia structure), Al_{2−2 y} Ga_{2 y} O₃ ( y ≤0.12 corundum structure), Ga_{2−2 x} Al_{2 x} TiO₅ (0≤ x ≤1 pseudobrookite structure), and several β-gallia rutile intergrowths that can be expressed as Ga_{4−4 x} Al_{4 x} Ti _{n −4}O_{2 n −2} ( x ≤0.3, 15≤ n ≤33). This study showed no evidence to confirm that aluminum substitution of gallium stabilizes the n =7 β-gallia–rutile intergrowth as has been mentioned in previous work.     

Solid Solutions within Selected SrO-LnO1.5-TiO2 Systems

A region of selected SrO-LnO_1.5-TiO₂ (Ln = La, Ce, Pr, or Nd) systems was studied experimentally using X-ray diffractometry (XRD). A series of solid solutions with composition Sr_{4 x} Ln_{2 x/ 3}Ti₄O₁₂ having tetragonally distorted per-ovskite structures was found to exist along the tie line connecting SrTiO₃ and Ln₂Ti₃O₉. Reactions of SrLn₂Ti₄O₁₂, representative compounds of the series, with SrO were also studied. Additionally, the solubility of TiO₂ in Ln₂O₃-(3TiO_{2- m} (Ln = La, Pr, or Nd) at 1300°C was investigated using XRD.     

Phase Equilibria of the La2O3-SrO-CuO System at 950°C and 10 kbar

Phase equilibria of the La₂O₃-SrO-CuO system have been determined at 950°C and 10 kbar (1 GPa). Stable phases at the apices of the ternary phase diagram are CuO, La₂O₃, and SrO. Stable intermediate phases are La₂CuO₄ in the LaO_1.5-CuO binary and Sr₂CuO₃, SrCuO₂, and Sr₁₄Cu₂₄O₄₁ in the CuO-SrO binary. The La_2-xSr _x CuO_4-δ solid solution is stable where 0.0 ≤ x ≤ 1.3, the La_2-xSr_1+xCu₂O_6+δ solid solution is stable where 0.0 ≤ x ≤ 0.2, the La_8-xSr _x Cu₈O_20-δ solid solution is stable where 1.3 ≤ x ≤ 2.7, the La _x Sr_14-x-Cu₂₄O₄₁ solid solution is stable where 0 ≤ x ≤ 6, and the La_1+xSr_2-xCu₂O_5.5+δ phase is stable where 0.04 ≤ x ≤ 0.16. The La₂O₃-SrO-CuO phase diagram at 950°C and 10 kbar is almost identical to that determined by other authors at 950°C and 1 atm, in terms of phase stability and solid-solution ranges.     

Preliminary Observations on Phase Relations in the "V2O3–FeO" and V2O3–TiO2 Systems from 1400°C to 1600°C in Reducing Atmospheres

Phase relations within the "V₂O₃–FeO" and V₂O₃–TiO₂ oxide systems were determined using the quench technique. Experimental conditions were as follows: partial oxygen pressures of 3.02 × 10⁻¹⁰, 2.99 × 10⁻⁹, and 2.31 × 10⁻⁸ atm at 1400°, 1500°, and 1600°C, respectively. Analysis techniques that were used to determine the phase relations within the reacted samples included X-ray diffractometry, electron probe microanalysis (energy-dispersive spectroscopy and wavelength-dispersive spectroscopy), and optical microscopy. The solid-solution phases M₂O₃, M₃O₅, and higher Magneli phases (M _n O_{2 n −1}, where M = V, Ti) were identified in the V₂O₃–TiO₂ system. In the "V₂O₃–FeO" system, the solid-solution phases M₂O₃ and M₃O₄ (where M = V, Ti), as well as liquid, were identified.     

Microwave Dielectric Properties of La6Mg4A2W2O24 [A=Ta and Nb] Ceramics

The microwave dielectric properties of two A-site-deficient perovskite-type ceramics in the La₆Mg₄A₂W₂O₂₄ [A=Ta and Nb] system were investigated. The compounds were synthesized by the solid-state ceramic route. The structure and microstructure were analyzed using X-ray diffraction and scanning electron microscopy techniques. The dielectric properties were measured in the microwave frequency range [4–6 GHz] by the resonance method. La₆Mg₄Ta₂W₂O₂₄ had Q _u× f =13 600 GHz, ɛ_r=25.2, and τ_f=−45 ppm/°C and La₆Mg₄Nb₂W₂O₂₄ had Q _u× f =16 400 GHz, ɛ_r=25.8, and τ_f=−56 ppm/°C.     

Electrical Conduction Behavior of La1+xSr1−xGa3O7–δ Melilite-Type Ceramics

Ceramics of the melilite-type compound La_{1+ x} Sr_{1− x} Ga₃O_7−δ were prepared by conventional ceramic processing. Samples prepared represented the entire homogeneity region of the phase (i.e., x =−0.15 to 0.60). Electrochemical characterization under variable temperature and atmospheric conditions in the vicinity of air entailed four-point direct-current conductivity measurements and electromotive force measurements. La_{1+ x} Sr_{1− x} Ga₃O_7−δ samples exhibited a p -type behavior with generally increased conductivity with increased substitution of lanthanum for strontium, which reached a saturation value of ∼10⁻¹ S·cm⁻¹ at 950°C.     

Preparation, Structure, and Selected Catalytic Properties of the System LaMn1-xCuxO3-y

Samples of LaMn_1-xCu_xO_3-y in the range 0≤x≤0.8 were prepared from freeze-dried solutions of the nitrates. Samples with x≤0.6 were single-phase perovskites. At higher values of x , the samples contained La₂CuO₄ and CuO as well as the perovskite phase. Samples of LaMn_1−x,Cu_x,O_3−y supported on ceramic monoliths or when mixed with powdered A1₂O₃ exhibit catalytic activity for the oxidation of CO. Greatest activity is shown for 0.4≤x≤0.7. Although the catalysts are severely poisoned by SO₂, 2% H₂O in the gas stream causes only slight deactivation. Activities of other oxide catalysts were also measured and compared. Rate constants per unit surface area at 200° to 400°C follow the order Co₃O₄>Pt>LaMn_1−xCu_xO_3−y (0.4≤x≤0.7)>copper chromite>La_1−xSr_x,MnO₃≤ other substituted LaMnO₃ materials, CuO, or La₂CuO₄. The perovskite catalyst is more stable than Co₃O₄ or copper chromite when heated in 10% H₂+ 90% N₂.     

Near-Net-Shape Fabrication of Ti3AlC2-Based Composites

A porous ceramic preform was fabricated by printing a powder blend of TiC, TiO₂, and dextrin. The presintered preforms contained a bimodal pore size distribution with intra-agglomerate pores ( d ₅₀≈0.7 μm) and inter-agglomerate pores ( d ₅₀≈30 μm), which were subsequently infiltrated by aluminum melt spontaneously in argon above 1050°C. A redox reaction at 1400°C resulted in the formation of dense Ti–Al–O–C composites mainly composed of Ti₃AlC₂, TiAl₃, Al, and Al₂O₃, which attained a bending strength of 320 MPa, a Young's modulus of 184 GPa, and a Vicker's hardness of 2.5 GPa.     

Subsolidus Phase Relations in the Ga2O3-In2O3-SnO2 System

Subsolidus phase relationships in the Ga₂O₃–In₂O₃–SnO₂ system were studied by X-ray diffraction over the temperature range 1250–1400°C. At 1250°C, several phases are stable in the ternary system, including Ga₂O₃( ss ), In₂O₃( ss ), SnO₂, Ga_{3− x} In_{5+ x} Sn₂O₁₆, and several intergrowth phases that can be expressed as Ga_{4−4 x} In_{4 x} Sn _{n −4}O_{2 n −2} where n is an integer. An In₂O₃–SnO₂ phase and Ga₄SnO₈ form at 1375°C but are not stable at 1250°C. GaInO₃ did not form over the temperature range 1000–1400°C.     

Crystallization of Monoclinic 2TiO2·5Nb2O5

Monoclinic 2TiO₂·5Nb₂O₅ crystallizes at 810° to 835°C from an amorphous material prepared by the simultaneous hydrolysis of titanium and niobium alkoxides. Crystallization isotherms are described by the contracting cube equation 1 − (1 − f)¹¹³= k(t − t₀); the activation energy is 315 kJ·mol⁻¹. Monoclinic 2TiO₂·5Nb₂O₅ transforms to the orthorhombic modification at ∼1200° to 1300°C.     

Preparation and Electrical Properties of New Oxide Ion Conductors Ce6−xGdxMoO15−δ (0.0≤x≤1.8)

A series of oxide ion conductors Ce_{6− x} Gd _x MoO_15−δ (0.0≤ x ≤1.8) have been prepared by the sol–gel method. Their properties were characterized by differential thermal analysis/thermogravimetry (DTA/TG), X-ray diffraction (XRD), Raman, IR, X-ray photoelectron spectroscopy (XPS), and AC impedance spectroscopy. The XRD patterns showed that the materials were single phase with a cubic fluorite structure. The conductivity of Ce_{6− x} Gd _x MoO_15−δ increases as x increases and reaches the maximum at x =0.15. The conductivity of Ce_4.5Gd_1.5MoO_15−δ is σ_t=3.6 × 10⁻³ S/cm at 700°C, which is higher than that of Ce_4.5/6Gd_1.5/6O_2−δ (σ_t=2.6 × 10⁻³ S/cm), and the corresponding activation energy of Ce_4.5Gd_1.5MoO_15−δ (0.92 eV) is lower than that of Ce_4.5/6Gd_1.5/6O_2−δ (1.18 eV).