In situ intestinal permeability and in vivo absorption characteristics of olmesartan medoxomil in self-microemulsifying drug delivery system

To characterize the intestinal absorption behavior of olmesartan medoxomil (OLM) and to evaluate the absorption-improving potential of a self-microemulsifying drug delivery system (SMEDDS), we performed in situ single-pass intestinal perfusion (SPIP) and in vivo pharmacokinetic studies in rats. The SPIP study revealed that OLM is absorbed throughout whole intestinal regions, favoring proximal segments, at drug levels of 10–90 μM. The greatest value for effective permeability coefficient (P_eff) was 11.4?×?10^?6 cm/s in the duodenum (90 μM); the lowest value was 2.9?×?10^?6 cm/s in the ileum (10 μM). A SMEDDS formulation consisting of Capryol 90, Labrasol, and Transcutol, which has a droplet size of 200?nm and self-dispersion time of 21 s, doubled upper intestinal permeability of OLM. The SMEDDS also improved oral bioavailability of OLM in vivo: a 2.7-fold increase in the area under the curve (AUC) with elevated maximum plasma concentration (C_max) and shortened peak time (T_max) compared to an OLM suspension. A strong correlation (r²?=?0.955) was also found between the in situ jejunal P_eff and the in vivo AUC values. Our study illustrates that the SMEDDS formulation holds great potential as an alternative to increased oral absorption of OLM.     

Design and development of a self-microemulsifying drug delivery system of olmesartan medoxomil for enhanced bioavailability

Olmesartan medoxomil (OM) is a hydrophobic antihypertensive drug with low bioavailability (26%) and is known to have adverse effects such as celiac disease and enteropathy. The purpose of this study was to develop SMEDDS to increase bioavailability and decrease potential side effects of OM. Hydrophilic lipophilic balance was calculated by testing solubility of OM in different oils, surfactants, and cosurfactants to obtain the most suitable combination of SMEDDS. Pseudoternary phase diagram was used to select the better oil/water formulation of SMEDDS. After a test for 3-month stability, dissolution tests and parallel artificial membrane permeability assay (PAMPA) were conducted to investigate drug solubility and permeability. Biodistribution of fluorescent marked SMEDDS was observed by using in vivo imaging system. The pharmacodynamics of the drug were determined by measuring blood pressure from tails of rats. At the end of the experiment, intestines were examined for adverse effects of OM. Compared with tablet formulation according to the dissolution study, SMEDDS formulation showed 1.67 times improvement in solubility of OM. PAMPA studies suggested a much faster permeability rate for OM SMEDDS compared to the suspension form. Labeled SMEDDS gave 3.96 times stronger fluorescent emission than control dye administered mice in in vivo imaging system (IVIS^®) studies, indicating an increased bioavailability. Treating effect of SMEDDS was 3.1 times more efficient compared to suspension in hypertensive rats. It caused neither celiac-like enteropathy nor diarrhea, during 21-day noninvasive blood pressure system (NIBP) assay. Our results suggest that SMEEDS formulation improves dissolution and oral bioavailability of OM while reducing its adverse effects.     

In vitro and in vivo effects of morin on the intestinal absorption and pharmacokinetics of olmesartan medoxomil solid dispersions

Abstract

Purpose: In-situ evaluation to corroborate morin effects on the intestinal absorption and pharmacokinetic behavior of freeze-dried OLM-loaded solid dispersions with Caco-2 and in-vivo studies

Methods: Intestinal transport and absorption studies were examined by Caco-2 permeability, in-situ single pass perfusion and closed-loop models along with in-vivo pharmacokinetic studies to evaluate and confirm the effect of P-gp-mediated activity of morin. We evaluated the intestinal membrane damage in the presence of morin by measuring the release of protein and lactate dehydrogenase (LDH) followed by using qualitative and quantitative morphometric analysis to describe the surface characteristics of intestinal epithelium.

Results: Morin showed the highest P_eff value 13.8?±?0.34?×?10^?6?cm/s in jejunum than ileum (p?<?.01) at 100?µM with absorption enhancement of 1.31-fold together with enhanced (p?<?.01) secretory transport of 6.27?±?0.27?×?10?^?6?cm/s in Caco-2 monolayer cells. Our findings noticed 2.37 (in-situ); 2.39 (in-vivo) and 1.43 (in-situ); 1.36 (in-vivo) fold increase in AUC_0–t with elevated C_max and shortened T_max for freeze-dried solid dispersion in the presence of morin as compared to pure OLM and freeze-dried solid dispersions without morin, respectively.

Conclusions: Our study demonstrated that increased solubilization through freeze-dried OLM-loaded solid dispersion together with efflux inhibition improved intestinal permeability to one system that might lead to novel solubilization and efflux pump inhibition as a novel alternative potential to increase oral absorption and bioavailability of OLM.     

Solid self-microemulsifying drug delivery system of ritonavir

Context: Ritonavir (RTV) is a human immunodeficiency virus (HIV) protease inhibitor (PI) with activity against HIV, practically insoluble in water and recommended to co-administer as a booster along with other HIV-PI to enhance their bioavailability. The present study is aimed to enhance the dissolution and oral bioavailability of water-insoluble RTV using the Solid Self-Microemulsifying Drug Delivery System (S-SMEDDS).

Objective: To enhance the dissolution and oral bioavailability of water-insoluble RTV using the S-SMEDDS.

Material and methods: Liquid SMEDDS (L-SMEDDS) of RTV was formulated by the optimizing ratio of Imwitor 988 (Oil), Cremophor EL and Cremophor RH 40 (1:1) (surfactant) and Capmul GMS K-50 (cosurfactant). Optimized L-SMEDDS showed improved dissolution rate of RTV compared to pure RTV powder. Optimized L-SMEDDS of RTV was adsorbed on Neusilin US-2 using a simple wet granulation technique with selected excipients to convert it into S-SMEDDS.

Results and discussion: Optimized L-SMEDDS showed an improved dissolution rate of RTV compared to pure RTV powder. Droplet size of resultant microemulsion of L-SMEDDS of RTV was observed between 16 and 22 nm and independent of pH (i.e. 0.1 N HCl and water). Conversion of the crystalline form of RTV to amorphous form was observed when RTV formulated into SMEDDS form as per X-ray diffraction study. In vitro dissolution study, stability study of optimized S-SMEDDS confirmed the formulation of stable and improved dissolution of RTV. Relative bioavailability of RTV was determined in male Wistar rats and pharmacokinetic parameters were calculated by the comparison of optimized S-SMEDDS versus aqueous suspension of RTV. S-SMEDDS improved the plasma profile in terms of maximum plasma concentration (C_max), and area under curve (AUC_0–24h), which is almost twofolds higher than the aqueous suspension of RTV.

Conclusion: S-SMEDDS tablet of RTV was formulated successfully by adsorbing optimized L-SMEDDS of RTV on Neusilin-US2® as a potential carrier with enhanced solubility and relative oral bioavailability compared to pure RTV by twofolds.     

Comparative permeability studies with radioactive and nonradioactive risedronate sodium from self-microemulsifying drug delivery system and solution

The purpose of this work is to prepare a self-microemulsifying drug delivery system (SMEDDS) for risedronate sodium (RSD) and to compare the permeability with RSD solution. The solubility of RSD was determined in different vehicles. Phase diagrams were constructed to determine the optimum concentration of oil, surfactant, and cosurfactant. RSD SMEDDS was prepared by using a mixture of soybean oil, cremophor EL, span 80, and transcutol (2.02:7.72:23.27:61.74, w/w, respectively). The prepared RSD SMEDDS was characterized by droplet size value. In vitro Caco-2 cell permeability studies were performed for SMEDDS and solution of radioactive (^99?mTc-labeled RSD) and nonradioactive RSD. The experimental results indicated that RSD SMEDDS has good stability and its droplet size is between 216.68?±?3.79 and 225.26?±?7.65 during stability time. In addition, RSD SMEDDS has higher permeability value than the RSD solution for both radioactive and nonradioactive experiments. The results illustrated the potential use of SMEDDS for delivery of poorly absorbed RSD.     

High-throughput formulation screening system for self-microemulsifying drug delivery

Purpose: To develop a high-throughput formulation screening (HTFS) system for self-microemulsifying drug delivery system (SMEDDS) formulations. Methods: Formulations were prepared by dispensing surfactants and a model compound (Nilvadipine) dissolved in ethanol and oil with a robotic liquid dispenser. Screenings of emulsion particle size and phase stability were conducted for selecting SMEDDS formulations by a turbidity assay. Results: Formulations were prepared at 40 minute/96-formulation. Both the screenings were conducted at 1 minute/96-formulation. SMEDDS formulations and the most suitable hydrophilic surfactant (HS)/lipophilic surfactant (LS) combination, which formed the largest SMEDDS area on its corresponding phase diagram, were selected by SMEDDS–HTFS system with minimal manpower (one person) and compound consumption (0.2 mg/formulation). Conclusions: SMEDDS–HTFS system enabled rapid and efficient selections of SMEDDS formulations and the most suitable HS/LS combination for SMEDDS.     

Solid lipid nanoparticles as vesicles for oral delivery of olmesartan medoxomil: formulation,optimization and in vivo evaluation

Objective: Olmesartan medoxomil (OLM) is an antihypertensive drug with low oral bioavailability (28%) resulting from poor aqueous solubility, presystemic metabolism and P-glycoprotein mediated efflux. The present investigation studies the role of lipid nanocarriers in enhancing the OLM bioavailability through oral delivery.

Materials and methods: Solid lipid nanoparticles (SLN) were prepared by solvent emulsion-evaporation method. Statistical tools like regression analysis and Pareto charts were used to detect the important factors effecting the formulations. Formulation and process parameters were then optimized using mean effect plot and contour plots. The formulations were characterized for particle size, size distribution, surface charge, percentage of drug entrapped in nanoparticles, drug–excipients interactions, powder X-ray diffraction analysis and drug release in vitro.

Results and discussion: The optimized formulation comprised glyceryl monostearate, soya phosphatidylcholine and Tween 80 as lipid, co-emulsifier and surfactant, respectively, with an average particle size of 100?nm, PDI 0.291, zeta potential of ?23.4?mV and 78% entrapment efficiency. Pharmacokinetic evaluation in male Sprague Dawley rats revealed 2.32-fold enhancement in relative bioavailability of drug from SLN when compared to that of OLM plain drug on oral administration.

Conclusion: In conclusion, SLN show promising approaches as a vehicle for oral delivery of drugs like OLM.     

Design and evaluation of a self-microemulsifying drug delivery system for apigenin

Objective of this study was to prepare, characterize and evaluate a self-microemulsifying drug delivery system (SMEDDS) with the aim to improve the solubility and dissolution of apigenin. Ternary phase diagrams were constructed in order to obtain the most efficient self-emulsification region, and the formulation of apigenin loaded SMEDDS was optimized by a simplex lattice experiment design. The optimal formulation of SMEDDS obtained was comprised of 60% Cremophor^®EL, 30% Transcutol^®HP and 10% Capryol? 90. The equilibrium solubility of apigenin in SMEDDS was about 15 mg/g, and it could increase the solubility of apigenin in water for about 7500 folds. Apigenin loaded SMEDDS could turn into microemulsion when diluted with distilled water and the droplets were spherical under transmission electron microscope (TEM), the average particle size was 17.1 nm and zeta potential ?5.18 mV. In vitro dissolution studies showed about 95% of apigenin was released within 10 min. All of the results showed that SMEDDS could enhance the solubility and dissolution of apigenin, and would be a potential carrier to improve the oral absorption of apigenin, a poorly water soluble drug.     

Development of self-microemulsifying drug delivery system for oral delivery of poorly water-soluble nutraceuticals

The objective of the study was to develop a self-microemulsifying drug delivery system (SMEDDS), also known as microemulsion preconcentrate, for oral delivery of five poorly water-soluble nutraceuticals or bioactive agents, namely, vitamin A, vitamin K2, coenzyme Q₁₀, quercetin and trans-resveratrol. The SMEDDS contained a 1:1 mixture (w/w) of Capmul MCM NF (a medium chain monoglyceride) and Captex 355 EP/NF (a medium chain triglyceride) as the hydrophobic lipid and Tween 80 (polysorbate 80) as the hydrophilic surfactant. The lipid and surfactant were mixed at 50:50 w/w ratio. All three of the SMEDDS components have GRAS or safe food additive status. The solubility of nutraceuticals was determined in Capmul MCM, Captex 355, Tween 80, and the SMEDDS (microemulsion preconcentrate mixture). The solubility values of vitamin A palmitate, vitamin K2, coenzyme Q₁₀, quercetin, and trans-resveratrol per g of SMEDDS were, respectively, 500, 12, 8, 56, and 87?mg. Appropriate formulations of nutraceuticals were prepared and filled into hard gelatin capsules. They were then subjected to in vitro dispersion testing using 250?mL of 0.01 N HCl in USP dissolution apparatus II. The dispersion test showed that all SMEDDS containing nutraceuticals dispersed spontaneously to form microemulsions after disintegration of capsule shells with globule size in the range of 25 to 200?nm. From all formulations, except that of vitamin K2, >80–90% nutraceuticals dispersed in 5–10?min and there was no precipitation of compounds during the test period of 120?min. Some variation in dispersion of vitamin K2 was observed due to the nature of the material used (vitamin K2 pre-adsorbed onto calcium phosphate). The present report provides a simple and organic cosolvent-free lipid-based SMEDDS for the oral delivery of poorly water-soluble nutraceuticals. Although a 50:50 w/w mixture of lipid to surfactant was used, the lipid content may be increased to 70:30 without compromising the formation of microemulsion.     

Development of phyllanthin-loaded self-microemulsifying drug delivery system for oral bioavailability enhancement

Phyllanthin, a poorly water-soluble herbal active component from Phyllanthus amarus, exhibited a low oral bioavailability. This study aims at formulating self-microemulsifying drug delivery systems (SMEDDS) containing phyllanthin and evaluating their in-vitro and in-vivo performances. Excipient screening was carried out to select oil, surfactant and co-surfactant. Formulation development was based on pseudo-ternary phase diagrams and characteristics of resultant microemulsions. Influences of dilution, pH of media and phyllanthin content on droplet size of the resultant emulsions were studied. The optimized phyllanthin-loaded SMEDDS formulation (phy-SMEDDS) and the resultant microemulsions were characterized by viscosity, self-emulsification performance, stability, morphology, droplet size, polydispersity index and zeta potential. In-vitro dissolution and oral bioavailability in rats of phy-SMEDDS were studied and compared with those of plain phyllanthin. Phy-SMEDDS consisted of phyllanthin/Capryol 90/Cremophor RH 40/Transcutol P (1.38:39.45:44.38:14.79) in % w/w. Phy-SMEDDS could be emulsified completely within 6?min and formed fine microemulsions, with average droplet range of 27–42?nm. Phy-SMEDDS was robust to dilution and pH of dilution media while the resultant emulsion showed no phase separation or drug precipitation after 8?h dilution. The release of phyllanthin from phy-SMEDDS capsule was significantly faster than that of plain phyllanthin capsule irrespective of pH of dissolution media. Phy-SMEDDS was found to be stable for at least 6 months under accelerated condition. Oral absorption of phyllanthin in rats was significantly enhanced by SMEDDS as compared with plain phyllanthin. Our study indicated that SMEDDS for oral delivery of phyllanthin could be an option to enhance its bioavailability.     

Design of self-microemulsifying drug delivery systems using a high-throughput formulation screening system

Purpose: A high-throughput formulation screening (HTFS) system that enabled to rapidly and efficiently select self-microemulsifying drug delivery system (SMEDDS) formulations has been developed in our previous study. The purpose of this study was to investigate the applicability of the HTFS system to SMEDDS designs. Methods: A poorly soluble drug (Nilvadipine), an oil (Sefsol-218), 11 hydrophilic surfactants (HS), and 10 lipophilic surfactants (LS) were used. Formulations were prepared and SMEDDS formulations were chosen by the HTFS system. A HS with the largest number of SMEDDS formulations was selected. In the selected HS system, a LS with the largest number of SMEDDS formulations was selected. Formulations with minimum turbidity at each ratio of the selected HS/LS were chosen as optimized formulations. Results: A total of 2455 formulations were prepared and SMEDDS formulations were selected using the HTFS system. From the screening data, HCO60 was selected as a superior emulsifiable HS, and Plurol (PLUROL OLEIQUE CC497) was selected as a suitable LS to HCO60. Five optimized formulations were chosen from the HCO60/Plurol system. The formulations formed fine microemulsions (<33.6 nm) without phase separation and drug precipitation. These formulation designs were conducted using 600 mg of the drug at a rate of 400 formulations/person/day. Conclusion: SMEDDS formulations could be rapidly and efficiently designed using the HTFS system.     

In vitro and in vivo performance of a multiparticulate pulsatile drug delivery system

The objective of this study was to investigate the in vitro and in vivo drug release performance of a rupturable multiparticulate pulsatile system, coated with aqueous polymer dispersion Aquacoat® ECD. Acetaminophen was used as a model drug, because in vivo performance can be monitored by measuring its concentration in saliva. Drug release was typical pulsatile, characterized by lag time, followed by fast drug release. Increasing the coating level of outer membrane lag time was clearly delayed. In vitro the lag time in 0.1 N HCl was longer, compared to phosphate buffer pH 7.4 because of ionisable ingredients present in the formulation (crosscarmelose sodium and sodium dodecyl sulphate). In vitro release was also longer in medium with higher ion concentration (0.9% NaCl solution compared to purified water); but independent of paddle rotation speed (50 vs.100 rpm). Macroscopically observation of the pellets during release experiment confirms that the rupturing of outer membrane was the main trigger for the onset of release. At the end of release outer membrane of all pellets was destructed and the content completely released.

However, pellets with higher coating level and correspondingly longer lag time showed decreased bioavailability of acetaminophen. This phenomenon was described previously and explained by decreased liquid flow in the lower part of intestine. This disadvantage can be considered as a limitation for drugs (like acetaminophen) with high dose and moderate solubility; however, it should not diminish performance of the investigated system in principle.     

Development and characterization of self-microemulsifying drug delivery system of tacrolimus for intravenous administration

Tacrolimus (FK 506), a poorly soluble immunosuppressant is currently formulated in nonaqueous vehicle containing hydrogenated castor oil derivative for intravenous administration. Hydrogenated castor oil derivatives are associated with acute anaphylactic reactions. This proposes to overcome the problems of poor aqueous solubility of the drug and the toxicity associated with currently used excipients by the development of a new parenterally acceptable formulation using self-microemulsifying drug delivery system (SMEDDS). Solubility of FK 506 in various oils, surfactants, and cosurfactants was determined to identify SMEDDS components. Phase diagrams were constructed at different ratios of surfactants:cosurfactant (K(m)) to determine microemulsion existence area. Influence of oily phase content, K(m), aqueous phase composition, dilution, and incorporation of drug on mean globule size of microemulsions was studied. SMEDDSs were developed using ethyl oleate as oily phase and Solutol HS 15 as surfactant. Glycofurol was used successfully as a cosurfactant. Developed SMEDDS could solubilize 0.8% (wt/wt) FK 506 and on addition to aqueous phase could form spontaneous microemulsion with mean globule size < 30 nm. The resulting microemulsion was iso-osmotic, did not show any phase separation or drug precipitation even after 24 h, and exhibited negligible hemolytic potential to red blood cells.     

In vitro/in silico approach in the development of simvastatin-loaded self-microemulsifying drug delivery systems

Objective: The aims of this study were to formulate simvastatin (SV)-loaded self-microemulsifying drug delivery systems (SMEDDS), and explore the potential of these drug delivery systems to improve SV solubility, and also to identify the optimal place in the gastrointestinal (GI) tract for the release of SV using coupled in vitro/in silico approach.

Significance: In comparison to other published results, this study considered the extensive pre-systemic clearance of SV, which could significantly decrease its systemic and hepatic bioavailability if SV is delivered into the small intestine.

Methods: SV-loaded SMEDDS were formulated using various proportions of oils (PEG 300 oleic glycerides, propylene glycol monocaprylate, propylene glycol monolaurate), surfactant (PEG 400 caprylic/capric glycerides) and cosurfactant (polysorbate 80) and subjected to characterization, and physiologically-based pharmacokinetic (PBPK) modeling.

Results: According to the in vitro results, the selected SMEDDS consisted of 10.0% PEG 300 oleic glycerides, 67.5% PEG 400 caprylic/capric glycerides, and 22.5% polysorbate 80. The use of acid-resistant capsules filled with SV-loaded SMEDDS was found helpful in protecting the drug against early degradation in proximal parts of the GI tract, however, in silico simulations indicated that pH-controlled drug release system that dissolve in the distal parts of the intestine might further improve SV bioavailability (up to 7.20%).

Conclusion: The obtained results suggested that combined strategy for the improvement of SV bioavailability should comprise solubility enhancement and delayed drug release. The developed SV-specific PBPK model could potentially be used to assess the influence of formulation factors on drug absorption and disposition when developing SV oral dosage forms.     

Development of self-microemulsifying drug delivery system for oral bioavailability enhancement of berberine hydrochloride

The purpose of this study was to develop a self-microemulsifying drug delivery system (SMEDDS) to improve the oral bioavailability of Berberine hydrochloride (BBH), an important bioactive compound from Chinese Medicines with poor water solubility. Pseudoternary phase diagrams were constructed using oil, surfactant and co-surfactant types to identify the efficient self-microemulsification region. SMEDDS was characterized by morphological observation, droplet size, zeta-potential determination, stability, in vitro release and in vivo bioavailability study. The optimal formulation with the best self-microemulsifying and solubilization ability consisted of 40% (w/w) of ethyl linoleate and oleic acid (2:1), 35% (w/w) Tween-80 and 25% (w/w) glycerol. The SMEDDS of BBH could exhibit good stability. In vitro release test showed a complete release of BBH from SMEDDS was in 5 h. In vivo results indicated that the peak plasma concentration (C_max) and the area under the curve (AUC_{0→12 h}) of SMEDDS of BBH were higher than the commercial tablet by 163.4% and 154.2%, respectively. The relative bioavailability of SMEDDS of BBH was enhanced about 2.42-fold compared with the commercial tablet in rats. The study confirmed that the SMEDDS formulation could be used as a possible alternative to traditional oral formulations of BBH to improve its bioavailability.     

In situ intestinal absorption of cyclosporine A solid dispersion in rats

Effects of concentration of Polyoxyethylene (40) stearate, Na(+) and P-gp inhibitor on cyclosporin A (CyA-SD) absorption were investigated by in situ circulation method. The results showed that the absorption of CyA increased linearly with its concentration, indicating a passive diffusion process was dominated. CyA absorption decreased with the carrier concentration. The concentration of Na(+) didn't influence the drug absorbed (P > 0.05). The P-gp inhibitor enhanced the CyA absorption significantly (P < 0.05). The passive diffusion process during the intestinal absorption indicated that the solubility enhancement of CyA is one of the mechanisms for the absorption of this water insoluble drug.     

In vitro and in vivo anti-tumor effects of gemcitabine loaded with a new drug delivery system

In recent years, much attention has been given to liposomal formulation as an efficient drug loading system (DDS) in chemotherapy of cancer. In this study, the advantages of magnetic nanoparticles and Polyethylene Glyco (PEG) materials were considered to synthesize magnetic gemcitabine long-circulating liposomes (MGLL) and the potential of MGLL as a brand new delivery system was evaluated. MGLL was prepared using the reverse-phase evaporation method. In the optimized preparation, MGLL had an average diameter of 201 nm with a narrow size distribution measured by dynamic light scattering (DLS), which could be easily dispersed in ultrapure water under a stable state for 90 days. The encapsulation efficiency of gemcitabine in MGLL reached 87.2% as determined by HPLC. In vitro MTT assay showed that MGLL had significant cytotoxicity to MCF-7 cells compared with the conventional modalities. In vivo, the inhibition of tumor growth in MGLL group was more remarkable than that of other groups (P < 0.05). In conclusion, MGLL under optimized condition could be used as an effective carrier for tumor-targeted therapy.     

Preparation and in vitro evaluation of self-microemulsifying drug delivery systems containing idebenone

A new self-microemulsifying drug delivery system (SMEDDS) was developed to increase the dissolution rate, solubility, and, ultimately, bioavailability of a poorly water soluble drug, idebenone. Pseudoternary phase diagrams were used to evaluate the self-microemulsification existence area, and the release rate of idebenone was investigated. The mixtures consisting of Labrafac hydro or Labrafil 2609 (HLB values > 4) with the surfactant (Labrasol containing 80% Transcutol) and cosurfactant (Plurol oleique WL 1173) were found to be optimum formulations. Using the SMEDDS formulations of 5% to 20% of Labrafac hydro or Labrafil 2609 in combination with the surfactant/cosurfactant mixing ratio of 3, the microemulsion existence field was wider compared to the other SMEDDS formulations due to high affinity for the continuous phase. The in vitro dissolution rate of idebenone from SMEDDS was more than twofold faster compared with that of tablets. The developed SMEDDS formulation can be used as a possible alternative to traditional oral formulations of idebenone to improve its bioavailability.     

Enhanced oral bioavailability of tacrolimus in rats by self-microemulsifying drug delivery systems

A new self-microemulsifying drug delivery system (SMEDDS) has been developed to increase the solubility, dissolution rate and oral bioavailability of tacrolimus (TAC). The formulations of TAC-SMEDDS were optimized by solubility assay, compatibility tests, and pseudo-ternary phase diagrams analysis. In order to inhibit the efflux of P-glycoprotein (P-gp) for tacrolimus, which is the substrate of P-gp, the excipients which show the inhibition effect to P-gp, such as tocopheryl polyethylene glycol succinate (TPGS) and Cremophor EL40, were chosen in the SMEDDS formulations. According to particle size and the rate of self-emulsification, two optimized formulations were selected: Miglyol 840 as oil phase, Transcutol P as cosurfactant, TPGS as surfactant (TPGS-SMEDDS) or Cremophor EL40 as surfactant (Crem-SMEDDS), respectively. The ratio of oil phase, surfactant and cosurfactant is 1:7.2:1.8. The mean droplet size distribution of the optimized SMEDDS was less than 20?nm. The in vitro dissolution test indicated a significant improvement in release characteristics of TAC. The prepared SMEDDS was compared with the homemade solution by administering the hard capsule to fasted rats. The absorption of TAC from TPGS-SMEDDS and Crem-SMEDDS form resulted in about sevenfold and eightfold increase in bioavailability compared with the homemade solution. Our study illustrated the potential use of SMEDDS for the delivery of hydrophobic compounds, such as TAC by the oral route.     

In vitro and in vivo adhesion testing of mucoadhesive drug delivery systems

Bioadhesive tablets were prepared by physical mixing of polymers and drug, then granulating and compressing into a tablet. The mucoadhesion was evaluated by shear stress measurement, detachment force measurement, and X-ray photography of the rabbit gastrointestinal tract. The strong interaction between the polymer and the mucous lining of the tissue helps increase contact time and permit localization. Polymers like hydroxypropyl methylcellulose K4M (HPMC K4M), hydroxypropyl methylcellulose 100 cps (HPMC 100 cps), carbopol-934, sodium carboxy methylcellulose (Na CMC), guar gum, and polyvinylpyrrolidone (PVP) were tested by shear stress measurement and detachment force measurement methods. HPMC K4M, showing maximum bioadhesion, was used in further studies. Adhesion was maximum between pH 5 and pH 6. Maximum adhesion was observed in the duodenum, followed by the jejunum and ileum. Barium sulfate (BaSO₄) matrix tablets containing polymer and drug were subjected to X-ray studies in rabbits, and it was found that the tablet was mucoadhesive even after 8 hr. Enteric coating did not show any effect on mucoadhesion after passing from the stomach.