Effect of surface properties of silica nanoparticles on their cytotoxicity and cellular distribution in murine macrophages

In this study, complexes composed of poly-l-tyrosine (pLT) and single-walled carbon nanotubes (SWCNTs) were produced and the dispersibility of the pLT/SWCNT complexes in water by measuring the ζ potential of the complexes and the turbidity of the solution were investigated. It is found that the absolute value of the ζ potential of the pLT/SWCNT complexes is as high as that of SWCNTs modified with double-stranded DNA (dsDNA) and that the complexes remain stably dispersed in the water at least for two weeks. Thermogravimetry analysis (TGA) and visualization of the surface structures of pLT/SWCNT complexes using an atomic force microscope (AFM) were also carried out.     

Assembly of untreated single-walled carbon nanotubes at a liquid-liquid interface

Untreated single-walled carbon nanotubes (SWCNTs) were assembled at a liquid-liquid interface to form an ultrathin film. The SWCNTs were dispersed into water using sodium dodecyl sulfate (SDS) as a solubilizing agent. Then, hexane was added to the dispersion to create a liquid-liquid interface. The SWCNTs were assembled at the interface to form a smooth ultrathin film when ethanol was added to the SWCNT water dispersion/hexane solution. The assembly mechanism was considered to be caused by the decreased wettability of SDS-coated SWCNT during the addition of ethanol because of desorption of SDS from the SWCNT surface. The assembly was remarkably robust and easily transferable to substrates. An AFM image of the film transferred onto a silicon substrate shows a closely packed uniform film of 3-8 nm thickness. The SWCNT ultrathin film showed high transparency of ca. 97% with an electrical conductivity of 71.4 S/cm. Fabrication processing was carried out in ambient conditions, thereby making it an attractive application for use in flexible electric devices.     

The synthesis of covalent bonded single‐walled carbon nanotube/polyvinylimidazole composites by in situ polymerization and their physical characterization

Single‐walled carbon nanotube (SWCNT) polyvinylimidazole (PVI) composites have been prepared by in situ emulsion polymerization. Dispersion of raw SWCNTs in the PVI matrix was improved by surface modification of the SWCNTs using nitric acid treatment and air oxidation. The carbonyl‐terminated SWCNTs were covalently bonded to PVI by in situ polymerization and the SWCNT/PVI composite was thus obtained. The morphological and structural characterizations of the surface‐functionalized SWCNTs and SWCNT/PVI composites were carried out by Fourier transform infrared spectroscopy, X‐ray diffraction, conductivity measurements, scanning, and transmission electron microscopy. Thermograms of the materials were determined by the differential scanning calorimetry technique. The characterization results indicate that PVI was covalently bonded to SWCNTs and a new material was then obtained. The functionalized SWCNTs showed homogenous dispersion in the composites, whereas purified SWCNT resulted in poor dispersion and nanotube agglomeration. SWCNT/PVI composites exhibited chemical stability enhancement in many common solvents. I–V curves of the samples exhibit an ohmic character. Conductivity values for pure SWCNTs, pure PVI and SWCNT/PVI composite were measured to be 3.47, 2.11 × 10⁻⁹, and 2.3 × 10⁻³ S/m, respectively. Because of resonance, a large dielectric constant is obtained for SWCNT/PVI composite, which is not observed for ordinary materials. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Mechanical properties of surface-functionalized SWCNT/epoxy composites

Well-dispersed epoxy/single-walled carbon nanotube (epoxy/SWCNT) composites were prepared by oxidization and functionalization of the SWCNT surfaces using polyamidoamine generation-0 (PAMAM-0) dendrimer. For comparison purposes, neat epoxy, epoxy/PAMAM-0 and epoxy/pristine-SWCNTs were also prepared. The morphology and mechanical properties of the above composite systems were investigated and correlated with the surface characteristics of SWCNTs. It is found that surface functionalization can effectively improve the dispersion and adhesion of SWCNTs in epoxy. This leads to enhancement in mechanical properties of epoxy, but the improvement is not as significant as expected. It is also found that surface functionalization agent will have an undesirable effect on the physical and mechanical properties of epoxy/SWCNT composites. Issues regarding optimization of mechanical properties of epoxy/SWCNT composites are discussed.     

Length dependent performance of single-wall carbon nanotube thin film transistors

The effects of the length of single-wall carbon nanotubes (SWCNTs) on their thin film transistors (TFTs) were investigated by using SWCNTs sorted in length using size exclusion chromatography. Higher device performances were obtained in longer SWCNTs and it was found that the average length of the SWCNTs is an important factor to determine the device performance. Detailed analyses, in which the SWCNT density was normalized using percolation threshold, confirmed that the dependence of on-current on the normalized density approximately follows percolation theory, independently of the SWCNT length. On the other hand, the behaviors of off-current and on/off ratio showed the considerably different dependence among SWCNT lengths.     

Polyaniline/single-wall carbon nanotube (PANI/SWCNT) composites for high performance supercapacitors

PANI/SWCNT composites were prepared by electrochemical polymerisation of polyaniline onto SWCNTs and their capacitive performance was evaluated by means of cyclic voltammetry and charge-discharge cycling in 1 M H₂SO₄ electrolyte. The PANI/SWCNT composites single electrode showed much higher specific capacitance, specific energy and specific power than pure PANI and SWCNTs. The highest specific capacitance, specific power and specific energy values of 485 F/g, 228 W h/kg and 2250 W/kg were observed for 73 wt.% PANI deposited onto SWCNTs. PANI/SWCNT composites also showed long cyclic stability. Based upon the variations in the surface morphologies and specific capacitance of the composite, a mechanism is proposed to explain enhancement in the capacitive characteristics. The PANI/SWCNT composites have demonstrated the potential as excellent electrode materials for application in high performance supercapacitors.     

Morphology of composite particles of single wall carbon nanotubes/biodegradable polyhydroxyalkanoates prepared by spray drying

Spray drying was investigated as a strategy for producing single wall carbon nanotube (SWCNT)/polymer composites. The spray-drying method produced SWCNT/poly(3-hydroxybutyrate) and SWCNT/poly(3-hydroxyoctanoate) composite particles in which the SWCNTs have been trapped in a well-dispersed state throughout the polymer matrix. Increasing SWCNT content in the composite led to a change in particle morphology from spherical and smooth to rosette shape with angular distortions. The technique shows potential for bulk carbon composite fabrication.     

An easy method for direct metal coordination reaction on unoxidized single-walled carbon nanotubes

The transition metal copper (II) ion (Cu²⁺) was effectively coordinated with a single-walled carbon nanotube (SWCNT) to produce a SWCNT–Cu²⁺ complex by a metal coordination reaction. Since the complex was very reactive towards the carboxylic acid group, the chemical functionalization of SWCNTs was easy to accomplish. This approach was used to functionalize the surface of the SWCNTs with stearic acid or ethylenediaminetetraacetic acid for tuning of the relative hydrophobicity and hydrophilicity of the surface, respectively. The mild reaction conditions used for metal coordination of the SWCNTs minimized the defects that result from chemical modification of SWCNT. Thus, the electrical properties of unmodified SWCNTs were preserved. Various analytical techniques, including Fourier transform infrared spectroscopy, thermal gravimetric analysis, ultraviolet–visible spectroscopy, and water sorption isotherm measurements, were used to characterize the surface properties of the functionalized SWCNTs. Functionalization of SWCNTs by metal coordination reaction effectively modified the SWCNT surface, while conserving the excellent physical properties of the SWCNTs. The surface properties of the SWCNTs were easily tuned by introduction of the functional groups required for specific applications.     

Electrochemical durability of single-wall carbon nanotube electrode against anodic oxidation in water

The electrochemical capability of single-wall carbon nanotube (SWCNT) electrodes is investigated to establish their reliability in practical applications. Direct current (DC) voltage of +10 V is applied across the SWCNT anode and Pt cathode in water, and the electrochemical fracturing behavior of SWCNTs is analyzed using transmission electron microscopy and atomic force microscopy. A considerable number of short SWCNTs, with lengths of less than 200 nm, are observed to be electrochemically generated. This result suggests that the anodic corrosion of SWCNTs occurs even in water, a non-electrolyte liquid. Raman spectroscopy and a comparison study of the anodization behavior of SWCNTs with narrow (0.9 nm) and wide (1.8 nm) diameters indicate that the durability of narrow SWCNTs is lower than that of the wide SWCNTs.     

Supramolecular modification of single-walled carbon nanotubes with a water-soluble triptycene derivative

Supramolecular surface modification of single-walled carbon nanotubes (SWCNTs) using an amphiphilic molecule containing a bent triptycene moiety and a hydrophilic oligo(ethylene glycol) chain is described. The surface modification was realized through the binding of the triptycene moiety onto the sidewall of SWCNTs through a π–π stacking interaction, and the oligo(ethylene glycol) chains extend into the water and act as dispersing agents, thus yielding an aqueous SWCNT dispersion. This dispersion is stable for more than six months and contains a high concentration of SWCNTs. The dispersion was characterized by absorption, fluorescence, and Raman spectroscopy. Based on shape-fitting of SWCNTs and the triptycene moiety, the stacking of triptycene moieties on the SWCNT sidewall shows a nice selectivity for SWCNTs with a diameter of 1.0 nm.     

Photodynamic effects of chlorin e6 attached to single wall carbon nanotubes through noncovalent interactions

Chlorin e6 (Ce6), a big heterocyclic aromatic molecule, is considered promising photosensitizer for photodynamic therapy (PDT). Here an efficient nano-photosensitizer delivery system based on noncovalent interactions between Ce6 and single wall carbon nanotubes (SWCNTs) is proposed. By utilization of high surface area of SWCNTs, Ce6 was loaded on them with a high drug loading content by noncovalent π–π interactions. Then, the Ce6–SWCNT complexes were wrapped by chitosan to improve aqueous solubility and biocompatibility. The chemical characteristics of Ce6–SWCNTs and chitosan–Ce6–SWCNTs were evaluated by different analysis methods, including transmission electron microscopy, UV–Visible absorption spectra, and Fourier transform infrared spectra. The high cellular uptake of chitosan–Ce6–SWCNTs was confirmed by flow cytometry and confocal laser scanning microscopy. According to the WST-1 assay, the chitosan–Ce6–SWCNTs exhibited low dark toxicity and efficient PDT efficacy to HeLa cancer cells. These results indicate that chitosan–Ce6–SWCNTs are a potential photosensitizer delivery system for PDT.     

Modifying the electronic properties of single-walled carbon nanotubes using designed surfactant peptides

The electronic properties of carbon nanotubes can be altered significantly by modifying the nanotube surface. In this study, single-walled carbon nanotubes (SWCNTs) were functionalized noncovalently using designed surfactant peptides, and the resultant SWCNT electronic properties were investigated. These peptides have a common amino acid sequence of X(Valine)(5)(Lysine)(2), where X indicates an aromatic amino acid containing either an electron-donating or electron-withdrawing functional group (i.e. p-amino-phenylalanine or p-cyano-phenylalanine). Circular dichroism spectra showed that the surfactant peptides primarily have random coil structures in an aqueous medium, both alone and in the presence of SWCNTs, simplifying analysis of the peptide/SWCNT interaction. The ability of the surfactant peptides to disperse individual SWCNTs in solution was verified using atomic force microscopy and ultraviolet-visible-near-infrared spectroscopy. The electronic properties of the surfactant peptide/SWCNT composites were examined using the observed nanotube Raman tangential band shifts and the observed additional features near the Fermi level in the scanning tunneling spectroscopy dI/dV spectra. The results revealed that SWCNTs functionalized with surfactant peptides containing electron-donor or electron-acceptor functional groups showed n-doped or p-doped altered electronic properties, respectively. This work unveils a facile and versatile approach to modify the intrinsic electronic properties of SWCNTs using a simple peptide structure, which is easily adaptable to obtain peptide/SWCNT composites for the design of tunable nanoscale electronic devices.     

Advanced carbon nanotube/polymer composite infrared sensors

We demonstrate that both single-walled carbon nanotube (SWCNT) types and nanotube-matrix polymer-nanotube (CNT-P-CNT) junctions have profound impact on electro-optical properties of SWCNT/polymer composites. Composite IR sensors based on CoMoCAT^®-produced SWCNTs (SWCNTs_CoMoCAT) significantly outperform those based on HiPco^®-produced SWCNTs (SWCNTs_HiPco). Higher semiconducting nanotube concentration in a SWCNT material is critical to enhance the photo effect of IR light on SWCNT/polymer nanocomposites, whereas CNT-P-CNT junctions play a dominant role in the thermal effect of IR light on supported SWCNT/polymer composite films.     

3D microfabrication of single-wall carbon nanotube/polymer composites by two-photon polymerization lithography

We present a method to develop single-wall carbon nanotube (SWCNT)/polymer composites into arbitrary three-dimensional micro/nano structures. Our approach, based on two-photon polymerization lithography, allows one to fabricate three-dimensional SWCNT/polymer composites with a minimum spatial resolution of a few hundreds nm. A near-infrared femtosecond pulsed laser beam was focused onto a SWCNT-dispersed photo resin, and the laser light solidified a nanometric volume of the resin. The focus spot was three-dimensionally scanned, resulting in the fabrication of arbitrary shapes of SWCNT/polymer composites. SWCNTs were uniformly distributed throughout the whole structures, even in a few hundreds nm thick nanowires. Furthermore, we also found an intriguing phenomenon that SWCNTs were self-aligned in polymer nanostructures, promising improvements in mechanical and electrical properties. Our method has great potential to open up a wide range of applications such as micro- and nanoelectromechanical systems, micro/nano actuators, sensors, and photonics devices based on CNTs.     

The influence of single-walled carbon nanotube functionalization on the electronic properties of their polyaniline composites

The “in situ” preparation and characterization of composites of polyaniline (PANI) and single-walled carbon nanotubes (SWCNTs) are reported. To improve the dispersion and compatibility with the polymer matrix the raw SWCNTs were modified following different routes. SWCNTs oxidized by chemical or thermal treatments (nitric acid and air oxidation, respectively) were subjected to covalent functionalization with octadecylamine (ODA). SWCNT/PANI composites were prepared either from just oxidized SWCNTs, or from ODA functionalized SWCNTs. Temperature-programmed desorption, elemental analyses, ultraviolet-visible (UV-vis), UV-vis with near infrared and Raman spectroscopy, X-ray diffraction, scanning and transmission electron microscopy and conductivity measurements were used to characterize the functionalized SWCNT materials, dispersions and composites. The PANI composite prepared from air oxidized SWCNTs showed the best electrical conductivity indicating a better interaction with polyaniline than ODA functionalised SWCNTs. The improvement of conductivity is attributed to the doping effect or charge transfer of quinoide rings from PANI to SWCNTs.     

Spectroscopic studies and electrical properties of transparent conductive films fabricated by using surfactant-stabilized single-walled carbon nanotube suspensions

This study evaluates the effect of anionic and cationic surfactants on the dispersion of purified SWCNTs in water in terms of dispersibility and on electrical conductivity of TCFs and electronic band structures of SWCNTs. The dispersibility of surfactants in an aqueous SWCNT suspension is assessed with the amount of SWCNTs dispersed, the content of surfactants required to suspend SWCNTs, and the long-term stability of dispersion. Sodium dodecylbenzene sulfonate (SDBS) shows better dispersibility and electrical conductivity of SWCNTs than sodium dodecyl sulfate, sodium cholate, and cetyltrimethyl ammonium bromide. Electronic band structures of SWCNTs vary with surfactants and nitric acid treatment, investigated by using UV–Vis–NIR and Raman spectroscopy. Metallic and semiconducting SWCNTs and surfactants make electrostatic charge interactions between them, which occur in different manners according to the electronic types of tubes and the natures of surfactants. TCFs are fabricated by using the SWCNT suspension dispersed with SDBS, which reveal a low percolation threshold with the two dimensional percolation behavior. The highest ratio of dc to optical conductivity (σ_dc/σ_op) is observed to be ∼23.1, corresponding to sheet resistance of 69 Ω/sq at the 550-nm optical transmission of 80%, upon nitric acid treatment of the SWCNT films.     

Influence of carbon nanotubes on the thermal, electrical and mechanical properties of poly(ether ether ketone)/glass fiber laminates

Novel poly(ether ether ketone) (PEEK)/single-walled carbon nanotube (SWCNT)/glass fiber laminates incorporating polysulfone as a compatibilizing agent were fabricated by melt-blending and hot-press processing. Their morphology, mechanical, thermal and electrical properties were investigated and compared with the behavior of similar non-compatibilized composites. Scanning electron micrographs demonstrated better SWCNT dispersion for samples with polysulfone. Thermogravimetric analysis indicated a remarkable improvement in the thermal stability of PEEK/glass fiber by the incorporation of SWCNTs wrapped in the compatibilizer, ascribed to a significant thermal conductivity enhancement. Differential scanning calorimetry showed a decrease in the crystallization temperature and crystallinity of the polymer with the addition of both wrapped and non-wrapped SWCNTs. The laminates exhibit anisotropic electrical behavior; their conductivity out-of-plane is lower than that in-plane. Dynamic mechanical studies revealed an increase in the storage modulus and glass transition temperature in the presence of polysulfone. Mechanical tests demonstrated significant enhancements in stiffness, strength and toughness by the incorporation of wrapped nanofillers, whilst the mechanical properties of non-compatibilized composites only improved marginally. Samples with laser-grown SWCNTs exhibit enhanced overall performance. This investigation confirms that SWCNT-reinforced PEEK/glass fiber compatibilized composites possess excellent potential to be used as multifunctional engineering materials in industrial applications.     

Influence of lengths of millimeter-scale single-walled carbon nanotube on electrical and mechanical properties of buckypaper

The electrical conductivity and mechanical strength of carbon nanotube (CNT) buckypaper comprised of millimeter-scale long single-walled CNT (SWCNT) was markedly improved by the use of longer SWCNTs. A series of buckypapers, fabricated from SWCNT forests of varying heights (350, 700, 1,500 μm), showed that both the electrical conductivity (19 to 45 S/cm) and tensile strength (27 to 52 MPa) doubled. These improvements were due to improved transfer of electron and load through a reduced number of junctions for longer SWCNTs. Interestingly, no effects of forest height on the thermal diffusivity of SWCNT buckypapers were observed. Further, these findings provide evidence that the actual SWCNT length in forests is similar to the height.     

Cleaning organized single-walled carbon nanotube interconnect structures for reduced interfacial contact resistance

A method is presented for significantly reducing the interfacial contact resistance of single-walled carbon nanotube (SWCNT) interconnects test-structures. Conventional lithographic cleaning steps are insufficient for complete removal of lithographic residues in SWCNT networks, leading to large interfacial contact resistance. Using improved purification procedures and controlled developing time, the interfacial contact resistance between SWCNTs and contact electrodes of Ti/Au were found to reach values below 2% of the overall resistance in two-probe test-structures of SWCNTs, demonstrating the importance of cleaning lithographic residues from the surface of SWCNTs before the fabrication of metal electrodes. These low-resistance contacts are quite stable over a large temperature range, and represent a step towards the implementation of SWCNTs as future interconnects.     

Electrical conductivity and tensile properties of block‐copolymer‐wrapped single‐walled carbon nanotube/poly(methyl methacrylate) composites

Poly(methyl methacrylate) (PMMA) composites containing raw or purified single‐walled carbon nanotubes (SWCNTs) are prepared by in situ polymerization and solution processing. The SWCNTs are purified by centrifugation in a Pluronic surfactant, which consists of polyethyleneoxide and polypropyleneoxide blocks. Both the effects of SWCNT purity and non‐covalent functionalization with Pluronic are evaluated. Electrical conductivity of PMMA increases by 7 orders of magnitude upon the integration of raw or purified SWCNTs. The best electrical properties are measured for composites made of purified SWCNTs and prepared by in situ polymerization. Strains at fracture of the SWCNT/PMMA composites are nearly identical to those of the neat matrix. A certain decrease in the work to fracture is measured, particularly for composites containing purified SWCNTs (?31.6%). Fractography and Raman maps indicate that SWCNT dispersion in the PMMA matrix improves upon the direct addition of Pluronic, while dispersion becomes more difficult in the case of purified SWCNTs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41547.