Gelation and crosslinking characteristics of photopolymerized poly(ethylene glycol) hydrogels

The gelation and crosslinking features of poly(ethylene glycol) (PEG) hydrogels were scrutinized through the UV polymerization processes of poly(ethylene glycol) methacrylate (PEGMA) and poly(ethylene glycol) dimethacrylate (PEGDMA) mixtures. The real‐time evolutions of the elastic moduli of the prepolymerized mixtures with different crosslinking ratios of PEGMA and PEGDMA and the photoinitiator concentrations were measured during photopolymerization. The rheological properties were compared with other properties of the PEG hydrogels, including the relative changes in the C?C amounts in the mixtures before and after UV irradiation, water swelling ratio, gel fraction, mesh size, and mechanical hardness. As the portion of PEGDMA as a crosslinker increased, the final elastic modulus and gel fraction increased, whereas the swelling ratio and scratch penetration depth at the hydrogel film surface decreased because of the formation of compact networks inside the hydrogels. These results indicate that there was a good correlation between the rheological analysis for predicting the crosslinking transition during photopolymerization and the macroscopic properties of the crosslinked hydrogels. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41939.     

Hydrogels reinforced with nanoclays with improved response rate

Two series of semiinterpenetrating networks (SIPN) based on linear hydrophilic poly(vinyl alcohol) (PVA) and thermo‐responsive poly(N‐isopropylacrylamide) (PNIPA), physically crosslinked with inorganic clay, are presented. The hydrogels with different crosslinking densities were prepared by varying the content of clay from 1 to 6 wt % and contained linear interpenetrant, PVA in the range of 0.5–1.5 wt %. The effect of clay content on swelling/deswelling behavior and phase transition in PNIPA gels, as well as the feasibility of reinforcing the gels with high molecular weight PVA, were analyzed. The thermal response of hydrogels, followed by DSC, confirmed that the insertion of hydrophilic PVA did not have a significant effect on the onset of the volume phase transition temperature, while the response was faster. The equilibrium degree of swelling of SIPNs and PNIPA hydrogels was in the range of 9–79 and decreased with increasing content of clay. The internal morphology and surface wettability of the hydrogels were investigated by scanning electron microscope analysis and contact angle measurements, respectively. The network structural parameters of the PNIPA and SIPN nanocomposites hydrogels, such as the average molecular weight between crosslinks, M_c, and effective crosslinking density, N_e, were determined by dynamic mechanical analysis. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44535.     

Temperature/pH dual responsive OPGMA based copolymeric hydrogels prepared by gamma radiation: an optimisation study

The purpose of this study was to attain oligo(propylene glycol) methacrylate (OPGMA) based hydrogels for different biomedical applications. Since the volume phase transition temperature (VPTT) of poly(oligo(propylene glycol) methacrylate) (POPGMA) homopolymer was below room temperature, it was necessary to tune the thermoresponsiveness and the VPTT to higher temperatures; radical copolymerisation of OPGMA with more hydrophilic and/or pH responsive monomers was used to adjust these values. A series of copolymeric hydrogels with different ratios of OPGMA, 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) was synthesised by gamma radiation. The swelling properties were preliminarily investigated over a wide pH (2.2–9.0) and temperature (4–80 °C) ranges. Additional characterization of their structure and properties was conducted by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The presented results revealed temperature/pH dual responsive P(OPGMA/IA) and P(OPGMA/HEMA/IA) copolymers with large diversity in swelling properties, as a result of the addition of OPGMA thermoresponsive units with a lower critical solution temperature (LCST) and IA pH responsive units. It was demonstrated that VPTT can be significantly shifted to higher (e.g. body) temperatures at higher pH values (pH ≥ 4) by increasing the IA content in the hydrogel composition. Due to the possibility of making dual responsive copolymers in the manner explained in this paper, OPGMA based hydrogels show potential for different biomedical applications.     

Preparation and characterization of pH‐ and temperature‐responsive semi–interpenetrating polymer network hydrogels based on linear sodium alginate and crosslinked poly(N‐isopropylacrylamide)

In this study, pH‐ and temperature‐responsive hydrogels based on linear sodium alginate (SA) and crosslinked poly(N‐isopropylacrylamide) (PNIPAAm) were prepared by semi‐interpenetrating network (semi‐IPN) technique. The dually responsive hydrogels were characterized by FTIR, DSC, and SEM, and their temperature‐ and pH‐responsive behaviors were investigated by measuring equilibrium swelling ratios and pulsatile swelling experiments. The results showed that these hydrogels underwent volume phase transition at around 33°C irrespective of the pH value of the medium, but their pH sensitivity was evident only below their volume phase transition temperature. Under basic conditions, the swelling ratios of SA/PNIPAAm semi‐IPN hydrogels were greater than that of pure PNIPAAm hydrogel and increased with increasing SA content incorporated into the hydrogels, but the case was inverse under acidic conditions. The pulsatile swelling experiments indicated that the higher the SA content in SA/PNIPAAm semi‐IPN hydrogels, the faster the response rate to both pH and temperature change. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1931–1940, 2005     

Synthesis and characterization of hydroxyethyl methacrylate/acrylamide responsive hydrogels

Hydrogels based on an aqueous solution of hydroxyethyl methacrylate (HEMA) and acrylamide (AM) in the presence of trithioglycolic acid (TTGA) were prepared under the effect of gamma irradiation. These hydrogels were characterized by IR spectroscopy and thermogravimetric analysis and investigated for temperature‐ and pH‐responsive materials. It was found that TTGA is essential for the formation of HEMA/AM hydrogels at different compositions, in which the gel fraction depends on composition. A binary mixture of HEMA and AM at equal ratios was the critical composition that forms hydrogels, even in the presence of TTGA. The IR spectroscopic analysis showed that the formation of hydrogels depends on hydrogen bonding and crosslinking. The TGA investigations with respect to mass loss and the temperatures of the maximum value of the rate of reaction showed that HEMA/AM hydrogels possess higher thermal stability than that of pure HEMA and this stability increases with increasing ratio of the AM component. Also, it was observed that the temperature of the maximum value of the rate of thermal decomposition reaction depends on hydrogel composition. However, calculations of the activation energy showed that the hydrogel composed of 90% HEMA and 10% AM exhibits the highest thermal stability during the increasing or decreasing rate of reaction. Kinetic studies of swelling in water showed that HEMA/AM hydrogels displayed a temperature‐responsive character within the temperature range 25–30°C, and showed a stepwise swelling behavior in the pH range 2–10, depending on composition. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1105–1115, 2005     

Smart carboxymethylchitosan hydrogels that have thermo‐ and pH‐responsive properties

Thermo‐responsive poly(N‐isopropylacrylamide) (poly(NIPAAm)) and pH‐responsive poly(N,N′‐diethylaminoethyl methacrylate) (poly(DEAEMA)) polymers were grafted to carboxymethylchitosan (CMC) via radical polymerization to form highly water swellable hydrogels with dual responsive properties. Ratios of CMC, NIPAAm to DEAEMA used in the reactions were finely adjusted such that the thermo and pH responsiveness of the hydrogels was retained. Scanning electron microscopy (SEM) indicated the formation of an internal porous structure for the swollen CMC hydrogels upon incorporation of poly(NIPAAm) and poly(DEAEMA). Effect of temperature and pH changes on water swelling properties of the hydrogels was investigated. It was found that the water swelling of the hydrogels was enhanced when the solution pH was under basic conditions (pH 11) or the temperature was below its lower critical solution temperature (LCST). These responsive properties can be used to regulate releasing rate of an entrapped drug from the hydrogels, a model drug, indomethacin was used to demonstrate the release. These smart and nontoxic CMC‐based hydrogels show great potential for use in controlled drug release applications with controllable on‐off switch properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41505.     

Photo‐cross‐linked biodegradable thermo‐ and pH‐responsive hydrogels for controlled drug release

A new strategy was developed to prepare thermo‐ and pH‐sensitive hydrogels by the crosslinking of poly(N‐isopropylacrylamide) with a biodegradable crosslinker derived from poly(L ‐glutamic acid). Hydrogels were fabricated by exposing aqueous solutions of precursor containing photoinitiator to UV light irradiation. The swelling behaviors of hydrogels at different temperatures, pHs, and ionic strengths were examined. The hydrogels shrank under acidic condition or at temperature above their collapse temperature and would swell in neutral or basic media or at lower temperature. These processes were reversible as the pH or temperature changed. All hydrogels exhibited no weight loss in the simulated gastric fluid but degraded rapidly in the simulated intestinal condition. Bovine serum albumin were used as a model protein drug and loaded into the hydrogels. The in vitro drug release experiment was carried out at different pH values and temperatures. The pH and temperature dependent release behaviors indicated the promising application of these materials as stimuli‐responsive drug delivery vehicles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Rapid pH‐dependent phase transition and elasticity of stimuli‐responsive cationic poly(N,N‐dimethylaminoethyl methacrylate) hydrogels prepared with a dimethacrylate crosslinker

Stimuli‐responsive hydrogels prepared from poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) and its copolymers have attracted much interest to serve in biomedical and pharmaceutical applications. To investigate pH‐dependent swelling and elasticity, a series of cationic hydrogels based on N,N‐dimethylaminoethyl methacrylate were prepared by free radical crosslinking copolymerization at 60 °C in the presence of tetraethylene glycol dimethacrylate as the crosslinker. The equilibrium swelling and the mechanical properties of the PDMAEMA hydrogels were investigated as a function of the gel preparation concentration. To explain the effect of pH on the equilibrium swelling of the hydrogels, pH‐dependent swelling studies were carried out in solutions of pH ranging from 2.1 to 10.7. It was found that the PDMAEMA hydrogels exhibit a rapid pH‐dependent phase transition in aqueous solutions; that is, the gels first remain in the swollen state at acidic pH then collapse in a very narrow range of pH. The results showed that the volume of PDMAEMA hydrogels in acidic conditions is about 10‐ to 40‐fold larger than that in the basic pH region. By using the Flory–Rehner theory, the characteristic network parameters of the PDMAEMA hydrogels were calculated and good agreement obtained between the swelling equilibria of hydrogels and their mechanical properties over the whole range of gel preparation concentration. © 2012 Society of Chemical Industry     

Physical properties of hydrogels of poly(2‐hydroxyethyl methacrylate) and copolymers with mono‐methyl itaconate synthesized by bulk and solution polymerization

The physical properties found during the swelling process of poly(2‐hydroxyethyl methacrylate) (PHEMA) and of copolymers of HEMA with mono‐n‐methyl itaconate, synthesized by solution and bulk polymerization, are reported. The swelling kinetics were followed at four different temperatures (295, 300, 305 and 310 K). Experimental data follow second‐order swelling kinetics, from where the kinetic rate constant k_∞ and the swelling capacity at equilibrium W_∞ were calculated as a function of temperature. The kinetic rate constant obeys Arrhenius behaviour. The following network parameters were determined for the hydrogels: Young's moduli E, effective crosslinking density v_e, molar mass per crosslink M_C, volume fraction ϕ₂ and polymer‐liquid interaction parameter χ. © 2000 Society of Chemical Industry     

Study on a new polymer/graphene oxide/clay double network hydrogel with improved response rate and mechanical properties

pH‐ and temperature‐responsive double network hydrogels (DN hydrogels) were prepared by using poly (N‐isopropylacrylamide) (PNIPAM) as a tightly crosslinked network (1st network), polyacrylic acid (PAA) as a loosely crosslinked network (2nd network), with clay and graphene oxide as effective crosslinkers and reinforcing fillers. The structure and morphology of the hydrogels were characterized by SEM, FTIR, DSC, and TGA. The synergetic effects of clay, GO and DN structure on various physical properties were investigated. With the increasing of crosslinking densities, the swelling ratios of DN hydrogels gradually decreased by increasing the contents of graphene oxide and PAA. While the DN hydrogels had much better mechanical properties than that of the conventional chemically cross‐linked PNIPAM hydrogels. POLYM. ENG. SCI., 55:1361–1366, 2015. © 2015 Society of Plastics Engineers     

Preparation and characterization of dual responsive sodium alginate‐g‐poly(vinyl alcohol) hydrogel

Poly(vinyl alcohol) (PVA) was chosen as a controllable gelator to prepare sodium alginate (SA)‐based physically cross‐linked dual‐responsive hydrogel by three steps. First, polyvinyl acetate (PVAc) was grafted onto SA via radical copolymerization. Then, the copolymer was subsequently converted into SA‐g‐poly(vinyl alcohol) (SAPVA) by alcoholysis reaction. PVA content of SAPVA was tailored by controlling the graft percentage of PVAc, i.e. through varying the amount of vinyl acetate during copolymerization. Finally, SAPVA hydrogels were formed by freezing‐thawing cycles. The structure of the graft copolymers was verified with FTIR spectroscopy. X‐ray diffraction analysis results revealed that the crystallinity of SAPVA hydrogels depended on the PVA content of SAPVA. The swelling test showed that SAPVA hydrogels were pH‐responsive, and the swelling was reversible. SAPVA hydrogels also behaved electric‐responsive. In addition, the pH‐sensitivity of SAPVA hydrogels was able to be controlled with the composition of the hydrogels. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

The effect of PEG(400)DA crosslinking agent on swelling behaviour of acrylamide-maleic acid hydrogels

Summary Acrylamide (AAm)-maleic acid (MA) hydrogels with different monomer ratios were prepared in an aqueous solution by radical polymerization using a new crosslinking agent, polyethyleneglycol (400) diacrylate (PEG (400) DA) and also using N, N’-methylenebisacrylamide (NMBA) for comparison purpose. The hydrogels were characterized by acid group content and FTIR spectroscopy. Their swelling and deswelling behavior were studied as a function of maleic acid content, pH and crosslinking agent. Incorporation of MA in hydrogels significantly increased their swelling ability and their equilibrium degree of swelling (EDS) values changed between 100–269 g water/g polymer in water while AAm polymers swollen less (22–23 g water/g polymer). The AAm hydrogels showed Fickian type diffusion but the all AAm-MA hydrogels showed non-Fickian type behavior. Their swelling degree increased with the increase of pH of the external medium and an instantaneous increase was observed near a pH value of 7.0. The use of PEG (400) DA instead of NMBA as a crosslinking agent also increased the swelling rate and capacity of the gel. The swelling constant (K) and the diffusion coefficient (D) of hydrogels were also increased. The swelling-deswelling cycles in acidic-basic solutions showed that they could be used as pH responsive gels without any decrease in swelling capacity.     

Synthesis and swelling behavior of pH- and temperature-sensitive poly[2-(dimethylamino)ethyl methacrylate-co-2-acrylamido-2-methylpropane-1-sulfonic acid] hydrogels

Summary Poly[2-(dimethylamino)ethyl methacrylate-co-2-acrylamido-2-methylpropane-1-sulfonic acid], poly(DMAEMA-co-AMPS), hydrogels were prepared by chain polymerization in water at 60 °C in the presence of tetraethyleneglycol diacrylate (TEGDA) as crosslinking agent. Ammonium persulfate (APS) and N,N,N’,N’-tetramethylethylenediamine (TEMED) were used as initiator and accelerator, respectively. Hydrogels with different feed compositions were prepared by keeping the total monomer concentration constant at 1 or 0.5 M. The concentration of TEGDA in the feed was adjusted so that it made for 3 or 2 mol % of the total monomer content while it was 1% for APS. In order to observe the effects of pH and ionic strength of the medium on swelling, the equilibrium swelling behavior of these hydrogels were investigated both in distilled water at various temperatures between 30 and 90 °C and in different buffer solutions with pH of 2.8, 5.3, 7.0, 10.0, and 12.4 at constant ionic strength (I=0.08 mol/l) at room temperature. The effects of temperature and co-monomer AMPS content on the swelling behavior of poly(DMAEMA-co-AMPS) in distilled water were also investigated. The copolymers with equimolar contents of DMAEMA and AMPS displayed minimum swelling both in distilled water and in buffer solutions due to ionic complex formation. Their swelling values in distilled water between 30 and 90 °C were constant. While equilibrium swelling values of copolymers in buffer solutions with pH between 2.8 and 7 were almost constant, they increased with increasing pH. The increase in the AMPS content and decrease in initial monomer concentration increased the equilibrium swelling values of copolymers.     

Semi‐interpenetrating networks based on poly(N‐isopropyl acrylamide) and poly(N‐vinylpyrrolidone)

Three series of novel semi‐interpenetrating polymer networks, based on crosslinked poly(N‐isopropylacrylamide), PNIPA, and different amounts of the linear poly(N‐vinylpyrrolidone), PVP, were synthesized to improve the mechanical properties and thermal response of PNIPA gels. The effect of the incorporation of the linear PVP into the temperature responsive networks on the temperature‐induced transition, swelling/deswelling behavior, and mechanical properties was studied. Polymer networks with four different crosslinking densities were prepared with varying molar ratios (25/1 to 100/1) of the monomer (N‐isopropylacrylamide) to the crosslinker (N,N′‐methylenebisacrylamide). The hydrogels were characterized by determination of the equilibrium degree of swelling, the dynamic shear modulus and the effective crosslinking density, as well as tensile strength and elongation at break. Furthermore, the deswelling kinetics of the hydrogels was studied by measuring their water retention capacity. The inclusion of the linear hydrophilic PVP in the PNIPA networks increased the equilibrium degree of swelling. The tensile strength of the semi‐interpenetrating networks (SIPNs) reinforced with linear PVP was higher than that of the PNIPA networks. The elongation at break of these SIPNs varied between 22% and 55%, which are 22 – 41% larger than those for pure PNIPA networks. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Temperature‐responsive characteristics of poly(N‐isopropylacrylamide) hydrogels with macroporous structure

Macroporous poly(N‐isopropylacrylamide) (PNIPA) hydrogels were synthesized by free‐radical crosslinking polymerization in aqueous solution from N‐isopropylacrylamide monomer and N,N‐methylenebis (acrylamide) crosslinker using poly(ethylene glycol) (PEG) with three different number‐average molecular weights of 300, 600 and 1000 g mol^?1 as the pore‐forming agent. The influence of the molecular weight and amount of PEG pore‐forming agent on the swelling ratio and network parameters such as polymer–solvent interaction parameter (χ) and crosslinking density (ν_E) of the hydrogels is reported and discussed. Scanning electron micrographs reveal that the macroporous network structure of the hydrogels can be adjusted by applying different molecular weights and compositions of PEG during polymerization. At a temperature below the volume phase transition temperature, the macroporous hydrogels absorbed larger amounts of water compared to that of conventional PNIPA hydrogels, and showed higher equilibrated swelling ratios in aqueous medium. Particularly, the unique macroporous structure provides numerous water channels for water diffusion in or out of the matrix and, therefore, an improved response rate to external temperature changes during the swelling and deswelling process. These macroporous PNIPA hydrogels may be useful for potential applications in controlled release of macromolecular active agents. Copyright © 2006 Society of Chemical Industry     

Synthesis and evaluation of swelling kinetics of electric field responsive poly(vinyl alcohol)‐g‐polyacrylic acid/OMNT nanocomposite hydrogels

Novel electro‐responsive nanocomposite hydrogels were prepared by the radical graft polymerization reaction of partially neutralized acrylic acid on poly(vinyl alcohol) and organically modified MMT nanoclay (OMMT) using glutaraldehyde as a crosslinker and potassium initiator. The structures of the hydrogels were confirmed by using Fourier transform infrared, X‐ray diffraction, and scanning electron microscopy study. The nanocomposite hydrogels were characterized by evaluating such molecular weight between crosslinks, (Mc) crosslinking density (ρ), and mesh size (ξ). The effects of various parameters on the swelling behavior of the hydrogels were studied. The thermogravimetric analysis indicated that introduction of clay resulted in an increase in thermal stability. Finally, the electric stimuli responsive measurement indicates the bending of hydrogel toward the cathode in an aqueous solution of NaCl. POLYM. COMPOS., 36:34–41, 2015. © 2014 Society of Plastics Engineers     

Network characterization and swelling behavior of chemical hydrogels based on acid‐containing poly(vinyl alcohol)

Poly(vinyl alcohol) (PVA) was modified with phthalic and succinic anhydrides to give vinyl alcohol–vinyl ester copolymers that contain carboxylate groups. These half‐esters were then crosslinked by using the poly‐ (ethylene glycol) (PEG) 400 diglycidylether. Low crosslinker/carboxylate ratios were used to obtain low degrees of crosslinking, so the capacity of the resulting hydrogel to absorb water was high. Water absorption was determined gravimetrically as a function of time at room temperature. The equilibrium swelling ratio and compressive modulus were characterized for all the resulting PVA hydrogels and related to the network structure. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3026–3031, 2003     

Synthesis and characterization of an interpenetrating polymer network composed of poly(methacrylic acid) and poly(vinyl alcohol)

Temperature and pH‐responsive interpenetrating polymer network (IPN) hydrogels, constructed with poly(methacrylic acid) (PMAA) and poly(vinyl alcohol) (PVA), by a sequential IPN method, were studied. The characterization of IPN hydrogels was investigated by Fourier‐transform infrared spectroscopy, differential scanning calorimetry (DSC) and swelling under various conditions. The IPN hydrogels exhibited relatively high swelling ratios, in the range 230–380 %, at 25 °C. The swelling ratios of the PMAA/PVA IPN hydrogels were pH and temperature dependent. DSC was used for the quantitative determination of the amounts of freezing and non‐freezing water. The amount of free water increased with increasing PMAA content in the IPN hydrogels. Copyright © 2004 Society of Chemical Industry     

Reentrant phase transition and fast responsive behaviors of poly{N‐[3‐(dimethylaminopropyl)] methacrylamide} hydrogels prepared in poly(ethylene glycol) solutions

Macroporous temperature‐sensitive poly {N‐[3‐(dimethylaminopropyl)] methacrylamide} hydrogels were synthesized by free‐radical crosslinking polymerization of the monomer N‐[3‐(dimethylaminopropyl)] methacrylamide and the crosslinker N,N′‐methylenebisacrylamide in aqueous solutions at 22°C. Poly(ethylene glycol) (PEG) with a molecular weight of 1000 g/mol was used as the pore‐forming agent during the polymerization reaction. The concentration of PEG in the polymerization solutions was varied between 0 and 18 wt %, whereas the crosslinker (N,N′‐methylenebisacrylamide) concentration was fixed at 2 wt % (with respect to the monomer). The effects of the PEG concentration on the thermo‐induced phase‐transition behavior and the chemical structure, interior morphology, and swelling/deswelling kinetics were investigated. Normal‐type hydrogels were also prepared under the same conditions without PEG. An interesting feature of the swelling behavior of both the normal‐type and macroporous hydrogels was the reentrant phase transition, in which the hydrogels collapsed once and reswelled as the temperature was continuously increased. Scanning electron micrographs revealed that the interior network structure of the hydrogels prepared in PEG solutions became more porous with an increase in the PEG concentration in the polymerization solution. This more porous matrix provided numerous water channels for water diffusion in or out of the matrix and, therefore, an improved responsive rate to external temperature changes during the deswelling and swelling processes. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

表面强化交联聚(N-异丙基丙烯酰胺) 水凝胶的温敏和浓缩分离性能

为了提高聚(N-异丙基丙烯酰胺)(PNIPA)凝胶粒子的浓缩分离效果,以过硫酸铵/N,N,N,N,-四甲基乙二胺为引发体系,N,N′-亚甲基双丙烯酰胺(BIS)和二乙烯苯(DVB)为复合交联剂,通过反相悬浮聚合合成了表面强化交联的PNIPA凝胶粒子.考察了凝胶颗粒形态、温敏特性及其浓缩分离聚乙二醇/水性能.发现得到的凝胶为紧密珠状粒子,低临界溶解温度为32℃;随着溶质聚乙二醇相对分子质量增大或浓度减小,凝胶对聚乙二醇/水的分离效率提高;增加合成PNIPA凝胶时的BIS用量,可提高凝胶对聚乙二醇/水的分离效率,但溶胀率显著下降;增加DVB用量,分离效率大幅提高,而凝胶溶胀率基本不变.