共查询到17条相似文献,搜索用时 140 毫秒
1.
2.
3.
4.
针对目前垃圾破碎机故障诊断效率低的问题,设计了一种基于粗糙集理论与BP神经网络的故障诊断系统。结合粗糙集理论和BP神经网络的优点,首先利用粗糙集对原始故障诊断样本进行处理,然后对条件属性进行约简,删除冗余的信息,减少神经网络输入端的数据,从而简化神经网络的结构。并将基于粗糙集-BP神经网络的故障诊断系统对垃圾破碎机进行故障诊断。利用粗糙集对故障知识进行约简,简化BP神经网络结构,提高故障诊断的速度及准确度。将此方法应用于某型号垃圾破碎机的故障诊断中,诊断结果表明所提诊断方法可简化神经网络结构,提高诊断效率。 相似文献
5.
基于粗糙集理论的航空发动机滑油光谱诊断专家系统知识获取方法研究 总被引:1,自引:0,他引:1
针对航空发动机滑油光谱诊断专家系统的知识获取问题,本文建立了基于粗糙集理论的航空发动机滑油光谱诊断专家系统知识获取模型。首先建立反映光谱元素浓度及元浓度梯度与发动机磨损故障之间关系的典型故障样本集;然后运用粗糙集理论的离散、约简及规则提取等算法,从大量的故障样本中自动获取知识规则,并将知识规则存储于专家系统知识库中;最后,建立推理机,运用一定的推理策略实现发动机磨损故障诊断。本文利用航空发动机实测的油样光谱数据对所建立的粗糙集知识获取方法,进行了实例验证。 相似文献
6.
针对军用航空发动机的状态监测与故障诊断问题,研究了航空发动机的诊断知识动态获取模型及柔性诊断技术。建立了可扩展诊断样本库,实现样本库中故障征兆和故障模式的动态增减,以增加系统的柔性和可扩展性;运用粗糙集理论对样本集进行处理,实现冗余属性的约简、冗余样本的去除及样本冲突的消除;用神经网络通过对处理后的样本集进行学习以动态获取知识,将实际诊断样本输入到训练好的神经网络模型即可得到诊断结果。整个诊断过程具有充分的可扩展性和柔性,当有新样本加入时,按上述步骤进行处理即可实现诊断知识的动态获取和诊断。算例表明了方法的正确性和有效性。 相似文献
7.
设备故障智能诊断方法的研究 总被引:8,自引:0,他引:8
模糊聚类、粗糙集理论、灰色系统理论等相关技术曾被广泛应用于设备故障诊断中,但是模糊聚类只能对已知样本做出决策,不具有柔性,不能通过已知信息和聚类结果对问题所涉及领域内的新样本的类别做出决策;粗糙集理论不能处理连续变量;而灰色系统理论无法去除故障诊断中冗余的特征参数,不能区分各特征参数的重要性,因而制约了它们在故障诊断中的应用.在本文中,这几种理论被有机地结合起来,应用于设备故障诊断中.在故障诊断过程中,首先利用模糊c均值聚类对样本的参数进行离散化处理,求得各类别的聚类中心,接着基于粗糙集原理对设备特征参数进行约简,去除冗余参数,定量确定各特征参数的重要程度,然后根据约简的特征参数和各参数的重要程度,利用灰色关联分析的方法确定各种标准故障状态与目前设备状态的关联度,从而找到设备的故障所在之处.在本文最后部分通过实例证明,将模糊c均值聚类、粗糙集理论和灰色系统理论结合起来,应用于设备的故障诊断中是一种行之有效的方法,为智能故障诊断提供了理论基础. 相似文献
8.
9.
基于矢谱和粗糙集理论的旋转机械故障诊断 总被引:1,自引:0,他引:1
矢谱融合了转子同源双通道的信息,能准确反映转子运动状态.粗糙集理论是一种对决策表进行简化,去除冗余属性的数据分析和处理方法.提出了基于矢谱和粗糙集理论的旋转机械故障诊断方法.计算了旋转机械振动4种典型故障的矢谱征兆,使用粗糙集理论对其进行约简,根据约简的结果生成矢谱诊断规则,并利用得到的规则对故障测试样本进行了诊断.结果表明:相对于单通道数据,基于矢谱和粗糙集理论的故障诊断不仅简化了诊断规则,而且明显提高了故障诊断的准确率. 相似文献
10.
11.
MMAS与粗糙集在轴承复合故障诊断中的应用 总被引:4,自引:0,他引:4
在分析振动加速度信号的基础上,提出了新的粗糙集属性约简算法,并应用于轴承复合故障诊断.将最大一最小蚂蚁系统(max-min ant system,简称MMAS)引入条件属性约简中,以最坏Fisher准则函数作为启发式信息以提高搜索效率,综合考虑分类正确率和条件属性个数两方面因素,利用粗糙集理论约简故障诊断决策表,有效地提高了轴承故障诊断的效率. 相似文献
12.
A Rough Set Approach to the Ordering of Basic Events in a Fault Tree for Fault Diagnosis 总被引:10,自引:0,他引:10
L.P. Khoo S.B. Tor J.R. Li 《The International Journal of Advanced Manufacturing Technology》2001,17(10):769-774
The performance of manufacturing systems or equipment is, to a great extent, dependent upon the condition of their components.
Closely monitoring the condition of the critical components and carrying out timely system diagnosis whenever a fault symptom
is detected would help to reduce system downtime and improve overall productivity. Fault tree analysis (FTA) is a powerful
tool for reliability studies and risk assessment. However, most research on FTA focuses on the generation of minimum cut sets
and how to calculate the probability of main events. As a result, the issue concerning the ordering of basic events in a fault
tree has been largely neglected. In this paper, a novel approach based on rough set theory and a pairwise comparison table
for fault diagnosis is proposed. The approach attempts to learn from the pattern of decision-making by domain experts from
past experience and uses the knowledge acquired, which is in the form of a minimum decision rule set, to determine the ordering
of basic events in a fault tree. The details of the approach, together with the basic concepts of rough set theory, are presented.
A case study is used to illustrate the application of the proposed approach. Results show that a reasonable ordering of basic
events in a fault tree can be generated easily. With the ordering of basic events determined, a maintenance engineer in a
manufacturing plant can then carry out fault diagnosis in an efficient and orderly manner. 相似文献
13.
N.R. Sakthivel V. Sugumaran Binoy. B. Nair 《Mechanical Systems and Signal Processing》2010,24(6):1887-1906
Mono-block centrifugal pumps are widely used in a variety of applications. In many applications the role of mono-block centrifugal pump is critical and condition monitoring is essential. Vibration based continuous monitoring and analysis using machine learning approach is gaining momentum. Particularly, artificial neural networks, fuzzy logic have been employed for continuous monitoring and fault diagnosis. This paper presents the use of decision tree and rough sets to generate the rules from statistical features extracted from vibration signals under good and faulty conditions of a mono-block centrifugal pump. A fuzzy classifier is built using decision tree and rough set rules and tested using test data. The results obtained using decision tree rules and those obtained using rough set rules are compared. Finally, the accuracy of a principle component analysis based decision tree-fuzzy system is also evaluated. The study reveals that overall classification accuracy obtained by the decision tree-fuzzy hybrid system is to some extent better than the rough set-fuzzy hybrid system. 相似文献
14.
在二级齿轮箱的变负载过程中,为了有效地处理非平稳信号,采用小波包提取特征参量(条件属性值);为了有效地处理带噪声的数据,将变精度粗糙集理论引入到齿轮的故障诊断中,提出了一种条件属性约简方法.首先对连续属性进行离散化;然后定义集合M,根据实际情况,选取不同的正确分类率β,利用变精度粗糙集的近似分类质量进行条件属性约简,并与加入噪声数据后所得的约简结果进行了对比;最后通过齿轮故障实例验证了此方法的有效性和实用性. 相似文献
15.
16.
提出了一种基于粗糙集与支持向量机的电动机转子断条故障诊断方法。首先将电动机在不同故障状态下的振动信号离散化,再应用粗糙集软件rosetta对数据进行进一步的约简,得到约简后的数据应用于支持向量机的训练从而得到基于支持向量机的多分类器。实验证明:该方法检测电动机的转子断条故障是可行的。 相似文献
17.
粗糙集理论能够有效地处理不精确、不完整的数据和知识,并从中发现隐含知识,提示潜在规律。提出一种基于粗糙集理论的大型旋转机械故障诊断和知识获取模型。该模型从包含冗余和不一致信息的原始数据出发, 构建决策表,通过属性约简和基于分明矩阵的属性值约简获取故障诊断的最小约简属性集和诊断规则,并建立诊断规则知识库。基于该模型以某旋转注水机组故障分析为例,从来自实际的经验数据获取旋转注水机组转子故障诊断的规则知识,其属性约简率可达25%,并能有效解决旋转注水机组故障诊断中规则获取的知识冗余或缺失问题,验证了其有效性。 相似文献