New possibility on InZnO nano thin film for green emissive optoelectronic devices

Indium zinc oxide (InZnO) nano thin film was prepared from InZnO nanoparticles (NPs) by thermal evaporation technique. Fourier transform infrared spectroscopy showed the presence of metal-oxide bond. X-ray diffraction pattern revealed the mixed phase structure. The presence of elements In, Zn and O were identified from energy dispersive X-ray analysis. Size of the NPs was found to be 171 and 263 nm by transmission electron microscopy. Scanning electron microscopy image showed the spherical shape uniform morphology with uniform distribution grains. Photoluminescence spectrum exhibited a broad green emission for InZnO nano thin film. The acquired results of structure, smooth morphology and photoluminescence property suggested that the InZnO nano thin film to be a promising material for room temperature green emissive optoelectronic, laser diodes, solar cells and other optical devices.     

Optical element converting linear polarization into circular-tangential polarization

A new optical element capable of converting linear polarization into circular-tangential polarization (i.e., the electric vector is along the tangential direction to a circle) is proposed and demonstrated. The conversion characteristics of the fabricated element are evaluated, and the magnitude of aberration produced by the element is shown to be insignificant.     

Switchable induced polarization in LaAlO3/SrTiO3 heterostructures

Demonstration of a tunable conductivity of the LaAlO(3)/SrTiO(3) interfaces drew significant attention to the development of oxide electronic structures where electronic confinement can be reduced to the nanometer range. While the mechanisms for the conductivity modulation are quite different and include metal-insulator phase transition and surface charge writing, generally it is implied that this effect is a result of electrical modification of the LaAlO(3) surface (either due to electrochemical dissociation of surface adsorbates or free charge deposition) leading to the change in the two-dimensional electron gas (2DEG) density at the LaAlO(3)/SrTiO(3) (LAO/STO) interface. In this paper, using piezoresponse force microscopy we demonstrate a switchable electromechanical response of the LAO overlayer, which we attribute to the motion of oxygen vacancies through the LAO layer thickness. These electrically induced reversible changes in bulk stoichiometry of the LAO layer are a signature of a possible additional mechanism for nanoscale oxide 2DEG control on LAO/STO interfaces.     

Highly effective phototransducers based on polycrystalline heterostructures of AIIBVI compounds

Thin-film polycrystalline heterostructures based on A^IIB^VI compounds were prepared, and related highly effective surface-barrier phototransducers of the p-Cu_1.8S/n-A^IIB^VI/n-A^IIB^VI type (with a quantum efficiency of ∼0.9) were obtained. The heterostructures are promising materials for the creation of solar cells and UV photodetectors insensitive to the visible light.     

Orthogonal linear polarization tunable-beat ring laser with a superluminescent diode

An orthogonal linear polarization operated ring laser with a superluminescent diode has been demonstrated to generate a tunable optical beat signal. The ring cavity contains a superluminescent diode as the optical gain medium, Faraday rotators, and a variable phase retarder (Babinet-Soleil compensator). By controlling the retarder, we changed the beat frequency in the range from a few tens of megahertz to 100 MHz.     

Low-temperature spin spray deposited ferrite/piezoelectric thin film magnetoelectric heterostructures with strong magnetoelectric coupling

We report low-temperature spin spray deposited Fe₃O₄/ZnO thin film microwave magnetic/piezoelectric magnetoelectric heterostructures. A voltage induced effective ferromagnetic resonance field of 14 Oe was realized in Fe₃O₄/ZnO magnetoelectric (ME) heterostructures. Compared with most thin film magnetoelectric heterostructures prepared by high temperature (>600 °C) deposition methods, for example, pulsed laser deposition, molecular beam epitaxy, or sputtering, Fe₃O₄/ZnO ME heterostructures have much lower deposition temperature (<100 °C) at a much lower cost and less energy dissipation, which can be readily integrated in different integrated circuits.     

Enhanced linear polarization for tagged photon beams

The Illinois photon tagging facility has been modified to provide beams with a high degree of linear polarization. The method allows the polarization of an off-axis tagged photon beam to be greatly enhanced by means of a kinematic selection of the post-bremsstrahlung residual electrons that are used for tagging. As an initial test of the system, photon scattering was observed from the strong 1⁺ levels in magnesium and silicon.     

Design of metamirrors for linear to circular polarization conversion with super-octave bandwidth

In this paper, bandwidth improvement of reflection-mode linear to circular polarization converters (RMCPs) is studied. The proposed RMCP is based on multi-layer rectangular patches. Equivalent transmission line circuit of multi-layer reflection-mode polarization converters is used for designing the proposed metamirror. In addition, the approximate equation of axial ratio (AR) of the reflected wave is obtained from the structures containing rectangular patches on each layer. Polarization converters containing multi-layer rectangular patches can be utilized for different ranges of frequencies. However, the frequency range of 2–8 THz is considered in this paper without losing generality. The incident wave is assumed to be linearly polarized with 45° polarization angle. AR equation is used for initial optimization of the dimensions of rectangular patches to obtain the widest possible bandwidth of RMCPs with two- and three-layer patches. Secondary optimization is applied after specifying largest dimensions of the unit cell and excluding them from the variables of optimization. Finally, modified dimensions of the three-layer RMCP are obtained using parametrical study in simulations. The proposed three-layer polarization converter has the 3 dB axial ratio bandwidth of more than 116% and the permitted incident angle of higher than 25°.     

Highly efficient broadband conversion of light polarization by composite retarders

Driving on an analogy with the technique of composite pulses in quantum physics, we propose highly efficient broadband polarization converters composed of sequences of ordinary retarders rotated at specific angles with respect to their fast-polarization axes.     

Highly convergent focusing of light based on rotating dipole polarization

Focusing properties of transverse circular polarization modes that bring light to a small focal spot are investigated. Two particular illumination polarization distributions are discussed. Rotating electric dipole polarization results in a central lobe diameter 8% smaller than for the circularly polarized aplanatic case at a NA of 0.95 in air and is also smaller than for radial polarization at NAs less than 0.90. Azimuthal polarization with a phase singularity of charge unity results in a small central lobe width that is smaller than that produced by focusing radially polarized light, having a width that is 17% smaller than for circularly polarized illumination at a NA of 0.95.     

Experimental investigation of linear polarization in high-birefringence single-mode fibers

We report on measurements of linear polarization ratio in high-birefringence fibers as a function of wavelength. Comparison with standard step-index and with dispersion-shifted fibers reconfirms that the modes of polarization-maintaining fibers are not linearly polarized.     

Production of linear polarization by segmentation of helical undulator

A simple scheme to obtain linearly polarized radiation (LPR) with a segmented undulator is proposed. The undulator is composed of several segments each of which forms a helical undulator and has helicity opposite to those of adjacent segments. Due to coherent sum of radiation, the circularly polarized component is canceled out resulting in production of LPR without any higher harmonics. The radiation from the proposed device is investigated analytically, which shows that a high degree of linear polarization is obtained in spite of a finite beam emittance and angular acceptance of optics, if a sufficiently large number of segments and an adequate photon energy are chosen. Results of calculation to investigate practical performances of the proposed device are presented.     

Highly strong and conductive carbon nanotube/cellulose composite paper

Carbon nanotube (CNT)/cellulose composite materials were fabricated in a paper making process optimized for a CNT network to form on the cellulose fibers. The measured electric conductivity was from 0.05 to 671 S/m for 0.5–16.7 wt.% CNT content, higher than that for other polymer composites. The real permittivities were the highest in the microwave region. The unique CNT network structure is thought to be the reason for these high conductivity and permittivity values. Compared to other carbon materials, our carbon CNT/cellulose composite material had improved parameters without decreased mechanical strength. The near-field electromagnetic shielding effectiveness (EMI SE) measured by a microstrip line method depended on the sheet conductivity and qualitatively matched the results of electromagnetic field simulations using a finite-difference time-domain simulator. A high near-field EMI SE of 50-dB was achieved in the 5–10 GHz frequency region with 4.8 wt.% composite paper. The far-field EMI SE was measured by a free space method. Fairly good agreement was obtained between the measured and calculated results. Approximately 10 wt.% CNT is required to achieve composite paper with 20-dB far-field EMI SE.     

Backscatter linear and circular polarization analysis of roughened aluminum

A study of cross-polarized and copolarized intensities backscattered from roughened aluminum surfaces is presented for both linear and circular incident polarization states. The angular variation of measured Mueller matrices is shown to contain only diagonal elements, as predicted by the reciprocity theorem. The ratio of cross-depolarized to copolarized scattered intensities is significantly larger for circular than for linear input polarization states. In the linear case the ratio saturates beyond 50 degrees , whereas in the circular case the ratio continues to increase monotonically with angle. A phenomenological model for copolarization and cross-polarization intensities is shown to predict the observed behavior of both linear and circular input polarization states up to incident angles of 70 degrees .     

Penetration depth of linear polarization imaging for two-layer anisotropic samples

Polarization techniques can suppress multiply scattering light and have been demonstrated as an effective tool to improve image quality of superficial tissues where many cancers start to develop. Learning the penetration depth behavior of different polarization imaging techniques is important for their clinical applications in diagnosis of skin abnormalities. In the present paper, we construct a two-layer sample consisting of isotropic and anisotropic media and examine quantitatively using both experiments and Monte Carlo simulations the penetration depths of three different polarization imaging methods, i.e., linear differential polarization imaging (LDPI), degree of linear polarization imaging (DOLPI), and rotating linear polarization imaging (RLPI). The results show that the contrast curves of the three techniques are distinctively different, but their characteristic depths are all of the order of the transport mean free path length of the top layer. Penetration depths of LDPI and DOLPI depend on the incident polarization angle. The characteristic depth of DOLPI, and approximately of LDPI at small g, scales with the transport mean free path length. The characteristic depth of RLPI is almost twice as big as that of DOLPI and LDPI, and increases significantly as g increases.     

Optical thin-film linear polarization selector fabricated by oblique angle deposition

A linear polarization selector was made from a three-section sculptured thin film deposited using an oblique angle deposition technique. In this device, the circular Bragg reflector with a left-handed helical structure was sandwiched in between two quarter-wave plates with opposite in-plane birefringence. Within the Bragg regime, the normal incident S-polarized light on this device was reflected, whereas the incident P-polarized light was transmitted through it. The microstructure of the linear polarization selector was also examined by scanning electron microscopy.     

Relaxation iterative algorithms for solving cathodic protection systems with non‐linear polarization curves

This paper discusses the calculation of potential distribution of impressed cathodic protection (CP) models with non‐linear polarization curves. We propose a relaxation iterative algorithm for the non‐linear problem and prove both theoretically and numerically that this iterative sequence is convergent for any physical polarization curves. This feature is of significant importance in developing a computer code for the design of CP systems. Copyright © 2002 John Wiley & Sons, Ltd.     

Plasma measurements in pulse discharge with resistively heated emissive probe

A resistively heated emissive probe has been developed to work in low-pressure air plasma produced by 100 Hz pulsed DC source. The evolution of the discharge and consequent rapid changes in plasma potential and electron temperature are characterized for different fill pressures at constant input voltage of 300 V. The floating point method in the strong emission regime is applied to determine the plasma potential. Emissive probe responds to rapid changes in the discharge current during different stages of the pulse cycle. The electron temperature is determined from the potential difference of hot probe in the strong emission regime and the cold one incorporating the space charge effects of the hot probe. Temporal measurements of V _p and T _e describe the development and characteristics of the emissive probe technique for fast measurements in pulsating discharges.     

Efficient LEDs with a conjugated co-polymer as the emissive layer

We report on the use of a new highly luminescent conjugated polymer as an emissive layer in single and multi-layer electroluminescence devices. Poly(m-phenylenevinylene-co-2,5-dioctyloxy-p-phenylenevinylene) [PmPV-co-DOctOPV] was prepared via a Wittig synthesis reaction. The resulting polymer has a high photoluminescence quantum efficiency in the solid state with an emission spectrum peaking at 506 nm (2.45 eV) in the green. Three different electroluminescence devices were fabricated: (i) Single layer devices containing only PmPV-co-DOctOPV; (ii) Double layer devices with PmPV-co-DOctOPV and an evaporated film of 1,3-bis(4-tert-butylphenyl-1,3,4-oxadiazoyl)phenylene [OXD-7] as an electron transport layer; (iii) Triple layer devices containing PmPV-co-DOctOPV, OXD-7 and in addition a polyvinylcarbazole [PVK] hole transport layer. All the devices utilised an ITO anode and a MgAg cathode. Electroluminescence external quantum efficiencies for these devices were found to be respectively up to 0.08%, 0.55% and 1% respectively, corresponding to luminous efficiencies OF = 0.5, ≈ 3 and ≈ 6 lm/W and power efficiencies of 8.5 × 10⁻⁵, 5.9 × 10⁻⁴ and 6.0 × 10⁻⁴ W/W.