Distributed measurement of static strain in an optical fiber with multiple bragg gratings at nominally equal wavelengths

The Fourier transform relationship between the reflected light froma Bragg grating and the complex spatial modulation of the Bragg grating is used to produce a distributed strain sensing system. A tunable external cavity diode laser along with a reference reflector in anoptical fiber are used to produce a measurement of the phase and amplitude of the reflected light from the modulated Bragg grating as a function of wavelength. The system is demonstrated with 22 Bragg gratings in a single fiber on a cantilever beam and compared with foil strain gauge readings.     

光纤光栅半导体激光器激射波长与Bragg波长的偏离

利用包含光纤布拉格光栅(FBG)反射率分布的光纤光栅外腔半导体激光器(FGSL)的理 论模型,对FGSL 的激射波长进行了研究。结果表明激射波长并不一定在FBG布拉格反射波长处;布拉格反射波长相对于激射波长的偏移量与FBG的反射率分布、半导体增益介质的增益谱分布及增益峰值波长有关;激射波长可大于或小于布拉格反射波长。     

Quadratic behavior of fiber Bragg grating temperature coefficients

We describe the characterization of the temperature and strain responses of fiber Bragg grating sensors by use of an interferometric interrogation technique to provide an absolute measurement of the grating wavelength. The fiber Bragg grating temperature response was found to be nonlinear over the temperature range -70 degrees C to 80 degrees C. The nonlinearity was observed to be a quadratic function of temperature, arising from the linear dependence on temperature of the thermo-optic coefficient of silica glass over this range, and is in good agreement with a theoretical model.     

Distributed measurement of the complex modulation of a photoinduced Bragg grating in an optical fiber

A method of measuring the complex modulation of a Bragg grating is derived from a one-dimensional model of light propagating in an optical fiber. Interference fringes between the Bragg grating and a reference air-gap reflector are measured, and a Fourier transform of the interference fringes generated as a laser is swept through the wavelength is used to compute the complex modulation function of the Bragg grating over a restricted domain. Supporting data, taken by temperature tuning a distributed feedback diode laser, are shown.     

Cost-effective and high-resolution wavelength interrogation unit using an incomplete asymmetric arrayed waveguide grating

This paper presents a wavelength interrogation unit using an incomplete asymmetric arrayed waveguide grating (AWG) without output waveguides. The incomplete asymmetric AWG converts the wavelengths of the incident light into a spatial intensity distribution. The center of the spatial distribution is determined by a one-dimensional position sensitive detector (PSD). The simulation results show that wavelength shifts can be precisely interrogated by the device with a wavelength resolution of 3.5 pm. The device can be applied to the interrogation of fiber Bragg grating (FBG) temperature sensors with the temperature resolution of 0.3°C.     

阵列波导光栅解复用器光谱响应特性分析

基于单模光波导本征模场及其端面衍射场分布的高斯近似表达,推导出两个端面非接触光波导耦合的耦合系数的函数表达式,并基于此推导出阵列波导光栅解复用器的简单光谱响应效率的函数表达式。建立了分析阵列波导光栅解复用器光谱响应特性的简洁数学模型,阐明了阵列波导光栅解复用器对通道中心频率的响应度和相邻信号通道间的串扰与基本参数的关系,为设计和分析阵列波导光栅解复用器提供了理论基础。     

Wavelength response of waveguide volume grating couplers for optical interconnects

The wavelength response of a waveguide volume grating coupler (WVGC) is analyzed for coupling light from a slab waveguide into the superstrate. A leaky-mode approach is used in conjunction with rigorous coupled-wave analysis. A quantitative theoretical study of the effect of index modulation, waveguide index, and grating thickness on the wavelength bandpass of a WVGC is also presented. The FWHM wavelength bandpasses found for high-efficiency couplers range from 173 to 525 nm. The various Bragg conditions that can be used in designing a WVGC are also presented and compared. The use of the propagation constant of the mode being outcoupled as the incident wave vector in the Bragg condition is shown to produce the highest coupling efficiency.     

Nonlinearity Compensation of the Fiber Bragg Grating Interrogation System Based on an Arrayed Waveguide Grating

In this paper, we report on nonlinearity compensation for a solid-state fiber bragg grating (FBG) sensor interrogation system based on an arrayed waveguide grating (AWG) device. A lookup table with calibration data is used to improve system linearity. A reduction in the absolute value of the measurement error from 120 mustrain or 15degC to 4.8 mustrain or 0.6degC, respectively, is experimentally demonstrated.     

Fiber Bragg grating flow sensors powered by in-fiber light

This paper presents an active fiber Bragg grating temperature and flow sensor based on self-heated optical hot wire anemometry. The grating sensors are directly powered by optical energy carried by optical fibers. In-fiber diode laser light at 910 nm was leaked out from the fiber and absorbed by the surrounding metallic coating to raise the temperature and change the background refractive index distribution of the gratings. When the diode laser is turned off, the grating is used as a temperature sensor. When the diode laser is turned on, the resonance wavelength and spectral width change of the self-heated grating sensor is used to measure the gas flow velocity. The grating flow sensors have been experimentally evaluated for different grating length and input laser power. The grating flow sensors have demonstrated a 0.35- m/s sensitivity for nitrogen flow at atmosphere pressure.     

利用WDM光纤耦合器的光纤光栅传感解调技术

根据 WDM 光纤耦合器波长解调方案的工作原理、偏振特性以及影响系统波长分辨力的因素,提出一种改进的利用 WDM 光纤耦合器的光纤光栅传感解调技术。该技术在原技术的基础上,采用偏振控制器控制入射光偏振状态,提高了解调的精度和稳定性。对 WDM 光纤耦合器的多次波长扫描结果表明,采用偏振控制器后,其波长误差可减小到 5pm 左右。实验采用 1540/1560nm的 WDM 光纤耦合器对单点光纤光栅应变传感器进行静态解调,结果表明:按此技术开发的解调系统具有 0.01nm 波长分辨力和 10nm 的波长线性解调范围。     

Analysis of thermal decay and prediction of operational lifetime for a type I boron-germanium codoped fiber Bragg grating

The thermal decay of a type I fiber Bragg grating written at 248 nm in boron-germanium codoped silica fiber was examined in terms of its reflectivity and Bragg wavelength change. In addition to the decay in reflectivity, which was observed, a shift in Bragg wavelength over the temperature range considered was seen. A mechanism for the decay in the reflectivity was developed and modeled according to a power law, and the results were compared with those from the aging curve approach. The wavelength shift was simulated by modification of the power law, which was also found to fit well to the experimental data. Temperature-induced reversible and irreversible change in the grating characteristic were observed and considered to be a means to predict the working lifetime of the grating at comparatively low temperatures. Accelerated aging was also reviewed and compared in terms of reflectivity and Bragg wavelength shift. It was shown that the temperature-induced irreversible shift in the Bragg wavelengths could not be predicted by use of the isothermal decay of the refractive-index modulation. The results were discussed within the framework of the current theoretical approaches for predicting the stability of gratings of this type.     

用纤内Bragg光栅进行动态应变测量的研究

描述了用纤内Bragg光栅进行动态应变测量研究的意义，原理和方法，提出了两种用纤内Bragg光栅动态应变测量时进行Bragg波长偏移量的解调方法；光干涉相位检测Bragg光栅反射波长偏移的解调方法和用DWDM密集波分复用器解调Bragg波长的方法，前者适用于高频宽带动态应变测量，后者适用于有限频率或中等频率响应的动态应变测量。     

Response of fiber Bragg gratings to longitudinal ultrasonic waves

In the last years, fiber optic sensors have been widely exploited for several sensing applications, including static and dynamic strain measurements up to acoustic detection. Among these, fiber Bragg grating sensors have been indicated as the ideal candidate for practical structural health monitoring in light of their unique advantages over conventional sensing devices. Although this class of sensors has been successfully tested for static and low-frequency measurements, the identification of sensor performances for high-frequency detection, including acoustic emission and ultrasonic investigations, is required. To this aim, the analysis of feasibilty on the use of fiber Bragg grating sensors as ultrasonic detectors has been carried out. In particular, the response of fiber Bragg gratings subjected to the longitudinal ultrasonic (US) field has been theoretically and numerically investigated. Ultrasonic field interaction has been modeled, taking into account the direct deformation of the grating pitch combined with changes in local refractive index due to the elasto-optic effect. Numerical results, obtained for both uniform and Gaussian-apodized fiber Bragg gratings, show that the grating spectrum is strongly influenced by the US field in terms of shape and central wavelength. In particular, a key parameter affecting the grating response is the ratio between the US wavelength and the grating length. Normal operation characterized by changes in wavelength of undistorted Bragg peak is possible only for US wavelengths longer than the grating length. For US wavelengths approaching the grating length, the wavelength change is accompanied by subpeaks formation and main peak amplitude modulation. This effect can be attributed to the nonuniformity of the US perturbation along the grating length. At very high US frequencies, the grating is not sensitive any longer. The results of this analysis provide useful tools for the design of grating-based ultrasound sensors for meeting specific requirements in terms of field intensity and frequencies.     

Application of Bragg grating sensors in the characterization of scaled marine vehicle models

Experiments using two different fiber-optic Bragg grating strain sensor systems to measure dynamic loads, slamming forces, and bending moments on a scaled catamaran model are reported. The system designed to measure slamming forces is based on dynamic locking of the laser diode wavelength to the peak wavelength of a Bragg grating mounted in a force cell. The sensor system has a dynamic range of 27 dB (1-550 N) and a bandwidth in excess of 1 kHz. For the measurement of bending moments, a time-domain multiplexing system, which used a unique pulsed rf modulation technique, of two Bragg grating sensors mounted on a steel beam was designed. The dynamic range of this system was also 27 dB [17 Nm (Newton meter) with a 0.03-Nm resolution]. The bandwidth was limited to approximately 50 Hz.     

Wavelength-tunable semiconductor pump diode for reconfigurable Raman amplification

We demonstrate a wavelength-tunable semiconductor pump diode for Raman amplification. Thediode is stabilized by a fiber Bragg grating (FBG) that can be continuously tuned over more than 20 nm. Tuning of the diode output wavelength is achieved by varying the center wavelength of the FBG, since the diode preferentially lases within the FBG bandwidth. We investigate the effects of wavelength tuning on the diode spectrum on its corresponding Raman gain, and on pump-pump four-wave mixing in fiber having zero-dispersion wavelength coincident with the Raman pumps.     

Dual wavelength fibre laser with tunable channel spacing using an SOA and dual AWGs

In this paper, we propose and demonstrate a dual wavelength fibre laser (DWFL) based on the use of an inhomogeneously-broadened semiconductor optical amplifier (SOA) gain medium as well as two arrayed waveguide gratings (AWGs) together with two optical channel selectors (OCSs) and a broadband fibre Bragg grating (FBG) to generate dual wavelength output at variable channel spacings. The widest spacing obtained from the DWFL is 12.21 nm, while the narrowest spacing is 1.16 nm. The DWFL has good stability with only minor power fluctuations of less than 2 dB and a side mode suppression ratio (SMSR) of approximately 38.5 dB with fluctuations of less than 0.5 dB.     

Negligible birefringence in dual-mode ion-exchanged glass waveguide gratings

Polarization dependence of UV-written Bragg gratings in buried ion-exchanged glass waveguides is investigated. A polarization-dependent shift in Bragg wavelength of less than 0.02 nm is measured, both for the even and the odd modes of a laterally dual-mode waveguide. The measured wavelength shift corresponds to a waveguide birefringence of the order of 10(-5), which is negligible for most applications in optical communications. It is observed that the UV-induced birefringence is small, within the limits of the measurement accuracy. The thermal stability of the fabricated gratings is also very good. The results are of particular importance for devices considered here since they require a polarization-independent mode-converting waveguide Bragg grating. Polarization-independent performance of these gratings enables the fabrication of a new class of integrated optical devices for telecommunication applications.     

High Pressure Sensor Based on Fiber Bragg Grating and Carbon Fiber Laminated Composite

A simple anisotropic structure made by carbon fiber laminated composite for fabricating a high pressure sensor is reported. A pressure sensor with good sensitivity over a broad measurement range is fabricated by using fiber Bragg grating and the anisotropic carbon fiber laminated composite structure. The characteristic responses of pressure and temperature of the new pressure sensor are analyzed. Experimental data show that when the pressure changes from 0 to 70 MPa, the wavelength shift of the fiber Bragg grating pressure sensor is up to 7 nm, corresponding to a sensitivity of 10 kPa/pm.      

Theoretical investigation on the temperature characteristics of liquid-cladding micro/nanofiber Bragg grating

Based on the functions of the effective refractive index of fundamental mode in step-index fiber, a theoretical mode about the Bragg wavelength shift of micro/nanofiber Bragg grating (MNFBG) is presented. The numerical simulation results demonstrate, for a MNFBG with given radius, the Bragg wavelength shifts to short wavelength as ambient temperature increases, and the reason results from the effective index decreasing with the increase of ambient temperature. Moreover, with the reduction of fiber-core radius, as well as the increase of ambient index and its thermo-optic coefficient, the temperature sensitivity, linearity and linear response range of the temperature-dependent Bragg wavelength shift are improved obviously. Especially for a MNFBG with fiber radius smaller than 0.5?μm, the linearity of Bragg wavelength shifting with temperature will be close to the theoretical limit, and the temperature sensitivity is proportional to the thermo-optic coefficient of the ambient liquid. Compared with the temperature properties of conventional fiber Bragg grating (FBG), all the results will provide much theoretical guides for FBG applied in fiber sensing and communication.     

采用DBR LD的正弦相位调制激光干涉仪

分析影响正弦相位调制半导体激光干涉仪测量精度和系统分辨力的因素,提出了用分布布拉格反射半导体激光器DBR LD实现高分辨力亚纳米精度测量的方案。理论计算表明,DBR LD的波长连续调制深度比F-P腔LD高一个量级。指出邮于DBR LD的特殊结构可通过简单的反馈回路稳定输出光功率,有效地避免了光强波动对测量精度提高的限制。