基于博弈论能耗均衡的WSN非均匀分簇路由协议

在无线传感器网络(WSN)的分簇路由算法中,节点间能耗不均容易引发 “能量空洞”现象,影响整个网络的性能。针对这个问题,提出了一种基于博弈论能耗均衡的非均匀分簇路由(GBUC)算法。该算法在分簇阶段,采用非均匀分簇结构,簇的半径由簇头到汇聚节点的距离和剩余能量共同决定,通过调节簇头在簇内通信的能耗和转发数据的能耗来达到能耗的均衡;在簇间通信阶段,通过建立一个以节点剩余能量和链路可靠度为效益函数的博弈模型,利用其纳什均衡的解来寻找联合能耗均衡、链路可靠性的最优传输路径,从而提高网络性能。仿真结果表明:与能量高效的非均匀分簇(EEUC)算法和非均匀分簇节能路由(UCEER)算法相比,GBUC算法在均衡节点能耗、延长网络生命周期等性能方面有显著的提高。     

能量高效的水声传感器网络多跳非均匀分簇算法

针对现有水声传感器网络(UW-ASN)分簇路由算法存在的能耗不均衡问题,提出了一种能量高效的多跳非均匀分簇(EEMUC)路由算法。通过节点到基站的物理距离建立网络非均匀分层模型,各层区域内的节点根据综合属性值选择簇头,靠近基站的簇的规模小于远离基站的簇。簇间采用多跳路由方式传送数据,从而均衡了簇头的能耗。实验结果表明,所提算法在簇头数目和节点的剩余能量等性能方面优于低能耗自适应分簇路由(LEACH)和能量高效的非均匀分簇(EEUC)算法,从而提高了水声传感器网络的能量效率,并延长了网络的生命周期。     

能量均衡的无线传感器网络非均匀分簇路由协议

提出了一种能量高效均衡、非均匀分簇和簇间多跳路由有机结合的无线传感器网络分布式分簇路由协议DEBUC(distributed energy-balanced unequal clustering routing protocol).该协议采用基于时间的簇头竞争算法,广播时间取决于候选簇头的剩余能量和其邻居节点的剩余能量.同时,通过控制不同位置候选簇头的竞争范围,使得距离基站较近的簇的几何尺寸较小.这样,网络中不同位置节点之间的簇内和簇间通信能耗得以互相补偿.DEBUC采用簇间多跳路由,根据节点剩余能量、簇内通信代价和簇间通信代价,每个簇头在邻居簇头集合中运用贪婪算法选择其中继节点.仿真实验结果表明,DEBUC能够有效地节约单个节点能量、均衡网络能耗、延长网络生存周期.     

能量均衡的无线传感器网络非均匀分簇路由协议?

提出了一种能量高效均衡、非均匀分簇和簇间多跳路由有机结合的无线传感器网络分布式分簇路由协议DEBUC(distributed energy-balanced unequal clustering routing protocol).该协议采用基于时间的簇头竞争算法,广播时间取决于候选簇头的剩余能量和其邻居节点的剩余能量.同时,通过控制不同位置候选簇头的竞争范围,使得距离基站较近的簇的几何尺寸较小.这样,网络中不同位置节点之间的簇内和簇间通信能耗得以互相补偿.DEBUC 采用簇间多跳路由,根据节点剩余能量、簇内通信代价和簇间通信代价,每个簇头在邻居簇头集合中运用贪婪算法选择其中继节点.仿真实验结果表明,DEBUC能够有效地节约单个节点能量、均衡网络能耗、延长网络生存周期.     

一种基于节点位置和密度的非均匀分簇路由算法

分析了现有分簇路由算法,提出了基于节点位置和密度的非均匀分簇路由算法。簇头选举阶段,考虑了节点的剩余能量,并引入竞争机制进行簇头选择;成簇阶段,综合考虑节点与基站的距离、节点密度以进行非均匀分簇,达到节点能耗均衡的效果,同时解决路由热区问题;簇间路由阶段,通过设立通信簇头节点,使簇间数据转发任务从簇头中分离,簇头节点只负责簇内的数据收集和融合,而通信簇头节点负责簇间数据传输,减少了簇头的能量消耗。实验结果表明,改进后的路由算法能够有效地均衡网络负载,并显著地延长网络的生命周期。     

一种能量优化WSNs非均匀分簇路由协议

为解决无线传感器网络多跳路由协议的“热区”问题,基于对EEUC协议的分析,提出了一种能量优化的WSNs非均匀分簇路由协议EOUCR（Energy Optimized Uneven Clustering Routing protocol）。该协议在簇形成阶段以候选簇头的剩余能量、其邻居节点的平均剩余能量和该候选簇头与SINK节点的距离作为竞选簇头的参数,且簇头竞争半径的选取考虑了成簇能耗,在此基础上形成了不同几何尺寸的簇,可减少“热区”内簇的簇头轮换次数,均衡网络负载。EOUCR在簇间多跳路由通信中引入了唯一与SINK节点通信的根节点,其他簇头则通过中继节点或直接与根节点通信,克服了EEUC能耗大且不均衡的不足,从而有效地解决临近SINK节点的“热区”问题。仿真实验结果表明,EOUCR能够更有效地节约节点能量、均衡网络能耗、延长网络生存周期。     

基于PSO的无线传感器网络非均匀分簇路由协议

提出并分析了一种能量均衡的集中式非均匀分簇路由协议EBUCP(energy-balanced unequal clusteringprotocol),本协议采用非均匀分簇和簇间多跳路由有机结合的方式。应用PSO算法,EBUCP选择一组最佳节点担任簇头并将网络划分为大小不等的簇,不仅最小化簇头和簇成员的距离以减小簇内通信能耗,同时使得距离基站较近的簇具有较小的几何尺寸来平衡不同位置簇头的能耗。EBUCP根据节点剩余能量和节点与基站距离确定簇间多跳路由,每个簇头在所有簇头集合中运用贪婪算法选择其中继节点。仿真实验结果表明,与LEACH和PSO-C协议比较,EBUCP的网络生存周期明显延长,能耗均衡性能更好。     

基于模糊逻辑推理的WSNs非均匀分簇算法

为了进一步降低无线传感网络WSNs(Wireless Sensor Networks)能耗,拓延网络寿命,提出了基于模糊逻辑推理的WSNs非均匀分簇算法,记为DUCF.DUCF算法充分考虑了节点剩余能量、节点度以及离基站距离.根据经验制定模糊规则,通过模糊推理系统得到节点当选为簇头的几率和簇尺寸.DUCF算法形成非均匀簇,进而平衡簇头间的能量消耗.仿真结果表明,DUCF算法在网络寿命、能量消耗方面的性能优于LEACH、CHEF和EAUCF算法.     

基于非均匀分簇和信息熵的无线传感网络路由算法

针对无线传感网络分簇算法中能量分布不均衡导致的“热区”问题,提出一种基于非均匀分簇和信息熵的路由算法。在簇头选举和竞争半径计算过程中综合考虑节点能量、节点密度和节点距基站距离,均衡簇头能耗以延长生存时间。采用簇间单跳多跳混合通信的路由规则,减少簇间通信能耗。对节点信息熵进行数据融合,引入融合权重系数减小数据融合的不确定性,提高数据融合效率。仿真结果表明,与LEACH、EEUC和EBUCA相比,该算法能够有效均衡网络能耗,延长网络生命周期。     

改进的无线传感器网络非均匀分簇路由算法

针对无线传感器网络中不均匀分簇引起能量空洞的问题,提出了改进的无线传感器网络非均匀分簇路由算法。该算法先根据节点剩余能量、节点到基站的距离、节点“度”和节点到簇头的距离等因素选举簇头;没有成为簇头的节点选择加入到距离最近的簇头所在的簇中,从而将整个网络划分为大小不等的簇;然后簇头再根据簇头剩余能量、簇头到基站的距离构造基于最小生成树的最优传输路径;通过簇内节点单跳、树内簇头多跳通信的方式将数据最终传输到基站。仿真结果表明,该路由算法能有效节约能量和均衡节点能耗,从而延长网络的生命周期。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。