Effects of the Hot Electron Interchange Instability on Plasma Confined in a Dipolar Magnetic Field

The Levitated Dipole Experiment (LDX) explores confinement and stability of plasma created within the dipole field of a strong superconducting magnet. During initial experiments, long-pulse, quasi-steady state discharges that last more than 10 s and have peak beta of more than 20% are studied. The plasma is created by multi-frequency electron cyclotron resonance heating (ECRH) at 2.45 and 6.4 GHz. A population of energetic electrons, with mean energies above 50 keV, dominates the plasma pressure. Creation of high pressure, high beta plasma is possible only when intense hot electron interchange (HEI) instabilities are stabilized by sufficient neutral gas fueling. The instabilities resonate with the magnetic drift motion of the energetic electrons and can cause rapid radial transport. Measurements of the electrostatic and magnetic fluctuations of the HEI instability are described along with observations of the instability’s spectral characteristics. Fluctuations of the outer poloidal field induced by the HEI show a rapid evolution of the perturbed pressure profile.      

Study of electromagnetic noise influence on quench detection system under different discharge conditions for EAST

EAST is the first Tokamak device whose toroidal and poloidal magnet are superconducting. The enormous magnetic field energy stored in the magnet system will transfer into thermal energy and cause the damage of superconducting magnet, if a quench happened. Therefore, reliable quench detection is a key issue for steady-state operation. In addition to electromagnetic noise from poloidal magnet fields and plasma current which will experience fast current ramp rate, radio frequency noise from heating system also have some interference on quench detection system to a certain degree. The most difficult point for quench detection system is required to have more detail evaluation on electromagnetic noise interference.Recently experiments have been carried out successfully in EAST device. The steady-state operation with 1 MA of plasma current and more than 100-s plasma duration has been obtained. In the paper, the electromagnetic noise interference on quench detection system under different discharge conditions are analyzed and relative process methods are also introduced. The technological experience and experimental data are significant for the constructing ITER and similar superconducting device have been mentioned which will supply significant technological experience and experimental data for constructing ITER and similar superconducting device.     

Formation of High-β ECH Plasma and Inward Particle Diffusion in RT-1

High-β plasma is stably confined in the Ring Trap 1 (RT-1) device, a magnetospheric configuration with a levitated dipole field magnet. The plasma pressure is mainly resulted from high temperature electrons generated by electron cyclotron resonance heating (ECH), whose bremsstrulung was observed by an X-ray CCD camera. The coil support structure is the main loss route of the hot electrons, and higher-β discharge is realized by coil levitation. Confinement properties of charged particles in the magnetospheric configuration were investigated by using toroidal non-neutral plasma. Fluctuation-induced inward particle diffusion into the strong magnetic field region was realized due to the onset of diocotron (Kelvin–Helmholtz) instability.     

Predictive Simulations of Plasma Heating and Current Drive by Neutral Beam Injection on EAST

Long pulse and high performance steady-state operation is the main scientific mission of experimental advanced superconducting tokamak (EAST). In order to achieve this objective, high-power auxiliary heating systems are essential. Radio frequency (RF) wave heating and neutral beam injection (NBI) are two principal methods. NBI is an effective method of plasma heating and current drive, and it has been used in many magnetic confinement fusion devices. Based on the plasma equilibrium of EAST (Li et al., Plasma Phys Control Fusion 55:125008, 2013) plus previous EAST experimental data used as initial conditions, the NBI module (Polevoi et al., JAERI-Data, 1997) employed in automated system for transport analysis (ASTRA) code (Pereverzev et al., IPP-Report, 2002) is applied to predict the effects of plasma heating and current drive with different neutral beam injection power levels. At certain levels of plasma densities and plasma current densities, the simulation results show that the NBI heats plasma effectively, also increases the proportions of NB current and bootstrap current among total current significantly.     

Numerical Simulation of Non-Inductive Current Driven Scenario in EAST Using Neutral Beam Injection

For achieving the scientific mission of long pulse and high performance operation,experimental advanced superconducting tokamak(EAST) applies fully superconducting magnet technology and is equiped with high power auxiliary heating system.Besides RF(Radio Frequency) wave heating,neutral beam injection(NBI) is an effective heating and current drive method in fusion research.NBCD(Neutral Beam Current Drive) as a viable non-inductive current drive source plays an important role in quasi-steady state operating scenario for tokamak.The non-inductive current driven scenario in EAST only by NBI is predicted using the TSC/NUBEAM code.At the condition of low plasma current and moderate plasma density,neutral beam injection heats the plasma effectively and NBCD plus bootstrap current accounts for a large proportion among the total plasma current for the flattop time.     

Drift-free magnetic equilibrium reconstruction using the response to plasma position modulation

Inductive magnetic sensors are widely used for plasma equilibrium reconstruction and control. However, their measurements involve electronic integration and can therefore experience drift leading to inaccurate plasma positioning. For this reason, we have studied an original drift-free approach to estimate the plasma equilibrium. The principle of this correction is based on modulation of the plasma position and current at three independent frequencies and analysing the modulated magnetic signals to provide additional estimation on the equilibrium. Using a plasma model based on current wires, the accuracy of such a method is assessed for Tore Supra in terms of the signal to noise ratio. The plasma position is recovered within a precision of 5 mm for a signal to noise ratio better than 80 dB. Applying our approach to dedicated experiments performed on the Tore Supra tokamak, we confirm the quality of the result and find that we can estimate the radial and vertical positions of the plasma to 1 mm with a one standard deviation confidence interval.     

Experimental study of density pump-out on EAST

In the experimental advanced superconducting tokamak,density pump-out phenomena were observed by using a multi-channel polarimeter-interferometer system under different heating schemes of ion cyclotron resonant heating,electron cyclotron resonance heating,and neutral beam injection.The density pump-out was also induced with application of resonant magnetic perturbation,accompanied with a degradation of particle confinement.For the comparison analysis in all heating schemes,the typical plasma parameters are plasma current 400 k A,toroidal field 2 T,and line average density 2?×?10~(19)m~(-3).The experimental results show that the degree of pump-out is concerned with electron density and heating power.Low density deuterium low confinement(L-mode) plasmas(3.5?×?10~(19)m~(-3)) show strong pump-out effects.The density pump-out correlated with a significant drop of particle confinement.     

Experimental Design of a Magnetic Flux Compression Experiment

Generation of ultrahigh magnetic fields is an interesting topic of high-energy-density physics, and an essential aspect of Magnetized Target Fusion (MTF). To examine plasma formation from conductors impinged upon by ultrahigh magnetic fields, in a geometry similar to that of the MAGO experiments, an experiment is under design to compress magnetic flux in a toroidal cavity, using the Shiva Star or Atlas generator. An initial toroidal bias magnetic field is provided by a current on a central conductor. The central current is generated by diverting a fraction of the liner current using an innovative inductive current divider, thus avoiding the need for an auxiliary power supply. A 50-mm-radius cylindrical aluminum liner implodes along glide planes with velocity of about 5 km/s. Inward liner motion causes electrical closure of the toroidal chamber, after which flux in the chamber is conserved and compressed, yielding magnetic fields of 2–3 MG. Plasma is generated on the liner and central rod surfaces by Ohmic heating. Diagnostics include B-dot probes, Faraday rotation, radiography, filtered photodiodes, and VUV spectroscopy. Optical access to the chamber is provided through small holes in the walls.     

Large Helical Device (LHD) program

The largest superconducting fusion machine, Large Helical Device (LHD), is now under construction in Japan and will begin operation in 1997. Design and construction of related R&D programs are now being carried out. The major radius of this machine is 3.9 m and the magnetic field on the plasma center is 3 T. The NbTi superconducting conductors are used in both helical coils and poloidal coils to produce this field. This will be upgraded in the second phase a using superfluid coil cooling technique. A negative ion source is being successfully developed for the NBI heating of LHD. This paper describes the present status and progress in its experimental planning and theoretical analysis on LHD, and the design and construction of LHD torus, heating, and diagnostics equipments.     

Electromagnetic disruption analysis of 2.45 GHz LHW antenna in EAST under different plasma configurations

The 2.45 GHz lower hybrid wave (LHW) antenna is one of the key components for plasma heating and current drive on experimental advanced superconducting tokamak (EAST). In the lower hybrid current drive (LHCD) experiment, the microwave power is delivered to the plasma through the LHW antenna. During a plasma disruption, the eddy currents are induced in the antenna because of plasma current decay. These induced currents interact with the strong static magnetic field to produce forces and torques in the antenna which are one of key factors determining the design of the antenna. Therefore, this paper presents the key results of a transient electromagnetic (EM) analysis of the antenna during disruption events under different plasma configurations. Two plasma centered disruption scenarios are taken into account: exp quench and linear quench. The analysis was performed with MAXWELL, a computer code based on the finite element method. All the results are presented and discussed which will offer guidance for the design and manufacture of the antenna in future.     

Determination of Thermomagnetic Current by Using Neutron Released from Deuterium–Tritium Fusion Reactions in Hybrid Reactors

It is proposed to use the neutrons released from a Deuterium–Tritium fusion reaction to drive thermomagnetic currents in a plasma corona surrounding the fusion plasma through the heating of the corona with nuclear reactions by the neutrons released in the fusion reaction because the fusion reaction cross sections are larger for slow neutrons, it is proposed to slow them down in a moderator separated from the hot plasma of the corona, giving the configuration a similarity to a heterogeneous nuclear fission reactor. While in a fission reactor the separation makes possible a growing neutron chain reaction, it here makes possible the autocatalytic amplification of the thermomagnetic currents by an increase of the fusion reaction rate through a rise of the plasma pressure by the magnetic pressure of the thermomagnetic currents. This is expected to substantially increase the product nτ over its Lawson value.     

Recent plasma control progress on EAST

In recent 2 years, various algorithms to control plasma shape, current and density have been implemented or improved for EAST tokamak. These plasma control performances have been verified by either simulated or actual experimental operation, and thus plasma control basis has been established for the long pulse operation and high performance H-mode plasma operation with low hybrid wave (LHW) and ion cyclotron resonance frequency (ICRF) heating. Startup simulation has been done by using TOKSYS code for the plasma breakdown in either 3.1 Wb or 4.5 Wb initial poloidal flux state and the scenarios proved to be robust and used for routine operation. Various shape configurations have been well feedback controlled by using ISOFLUX limited, double-null or single null algorithms based on RTEFIT equilibrium reconstruction. For the long pulse operation, strike point control and magnetics drift compensation have been implemented in the plasma control system (PCS). To improve the operation safety and efficiency, the verification of magnetic diagnostics before plasma breakdown has been demonstrated adequate to prevent a discharge in case of key sensor failure.     

Overview of magnetic control in ITER

ITER is targeting Q = 10 with 500 MW of fusion power. To meet this target, the plasma needs to be controlled and shaped for a period of hundreds of seconds, avoiding contact with internal components, and acting against instabilities that could result in the loss of control of the plasma and in its disruptive termination.Axisymmetric magnetic control is a well-understood area being the basic control for any tokamak device. ITER adds more stringent constraints to the control primarily due to machine protection and engineering limits. The limits on the actuators by means of the maximum current and voltage at the coils and the few hundred ms time response of the vacuum vessel requires optimization of the control strategies and the validation of the capabilities of the machine in controlling the designed scenarios.Scenarios have been optimized with realistic control strategies able to guarantee robust control against plasma behavior and engineering limits due to recent changes in the ITER design. Technological issues such as performance changes associated with the optimization of the final design of the central solenoid, control of fast transitions like H to L mode to avoid plasma-wall contact, and optimization of the plasma ramp-down have been modeled to demonstrate the successful operability of ITER and compatibility with the latest refinements in the magnetic system design.Validation and optimization of the scenarios refining the operational space available for ITER and associated control strategies will be proposed. The present capabilities of magnetic control will be assessed and the remaining critical aspects that still need to be refined will be presented. The paper will also demonstrate the capabilities of the diagnostic system for magnetic control as a basic element for control. In fact, the noisy environment (affecting primarily vertical stability), the non-axisymmetric elements in the machine structure (affecting the accuracy of the identification of the plasma boundary), and the strong component of eddy current at the start-up (resulting in a poor S/N ratio for plasma reconstruction for I_p < 2 MA requiring a robust plasma control) make the ITER magnetic diagnostic system a demanding part of the magnetic control and investment protection systems. Finally the paper will illustrate the identified roles of magnetic control in the PCS (plasma control system) as formally defined in the recent first step of the design and development of the system.     

Design and performance analysis of ITER ex-vessel magnetic diagnostics

Accurate magnetic diagnostics are essential to perform reliable operation of any tokamak. The ITER magnetic diagnostics include a wide variety of sensors located on the inner and outer surfaces of the vacuum vessel, in the divertor cassettes and in the casing of the toroidal field coils. As the measurement accuracy of the inner set of magnetic sensors might be compromised by various radiation effects and high heat loads, the complementary ex-vessel set is essential to provide backup information. This paper is an overview of the ex-vessel magnetic diagnostic which consists mainly of pick-up coils, steady state sensors, Rogowski coils in the toroidal field coil casing and fibre optic current sensors. The work presented aims at designing these sensors to meet the performance requirements in spite of the constraints due to the tokamak environment. The manufacturing constraints and the positioning requirements for all the ex-vessel magnetic sensors are described. The use and expected accuracy of the entire ex-vessel magnetic diagnostic is assessed in terms of magnetic equilibrium reconstruction and plasma current measurement precision.     

Progress and improvement of KSTAR plasma control using model-based control simulators

Superconducting tokamaks like KSTAR, EAST and ITER need elaborate magnetic controls mainly due to either the demanding experiment schedule or tighter hardware limitations caused by the superconducting coils. In order to reduce the operation runtime requirements, two types of plasma simulators for the KSTAR plasma control system (PCS) have been developed for improving axisymmetric magnetic controls. The first one is an open-loop type, which can reproduce the control done in an old shot by loading the corresponding diagnostics data and PCS setup. The other one, a closed-loop simulator based on a linear nonrigid plasma model, is designed to simulate dynamic responses of the plasma equilibrium and plasma current (I_p) due to changes of the axisymmetric poloidal field (PF) coil currents, poloidal beta, and internal inductance. The closed-loop simulator is the one that actually can test and enable alteration of the feedback control setup for the next shot. The simulators have been used routinely in 2012 plasma campaign, and the experimental performances of the axisymmetric shape control algorithm are enhanced. Quality of the real-time EFIT has been enhanced by utilizations of the open-loop type. Using the closed-loop type, the decoupling scheme of the plasma current control and axisymmetric shape controls are verified through both the simulations and experiments. By combining with the relay feedback tuning algorithm, the improved controls helped to maintain the shape suitable for longer H-mode (10–16 s) with the number of required commissioning shots largely reduced.     

Feedback Control of Plasma Current and Horizontal Position in HT-7

1. IntroductionA superconducting tokamak HT-7 has been estab-lished at ASIPP, Hefei, China. The machine.was de-signed to mainly investigate the reactor-relevant ls-sues, such as edvanced operation modes and plasmawall interastions in the near-steady-state condition.Its poloidal fie1d coils include ohmic heatlng coi1s'bias field coils' vertical field coils and horizontalfie1d coi1s (See Fig.1), being connected to indlvldualpower supplies which are all the thyristor--controlledrectifier unlt…     

The implementation of magnetics verification in EAST plasma control system

Experimental advanced superconducting tokamak (EAST) is an experimental device aiming at steady state plasma operation for fusion research. The values of many discharge parameters, such as plasma shape, position and current must be directly acquired or indirectly evaluated from the magnetic measurements, so the accuracy of magnetic measurements plays an important role in reliable plasma control performance. A method for verifying the key magnetic measurements in real time for each shot is described in this paper. Such magnetics verification will prevent the discharge from a key magnetic signal failure and ensure the quality of a successful discharge. The diagnostics verification algorithm has been implemented in the plasma control system for the EAST. The implementation details and its application in the recent experiment are presented in this paper.     

The design of the Tokamak Physics Experiment (TPX)

The Tokamak Physics Experiment is designed to develop the scientific basis for a compact and continuously operating tokamak fusion reactor. It is based on an emerging class of tokamak operating modes, characterized by beta limits well in excess of the Troyon limit, confinement scaling well in excess of H-mode, and bootstrap current fractions approaching unity. Such modes are attainable through the use of advanced, steady state plasma controls including strong shaping, current profile control, and active particle recycling control. Key design features of the TPX are superconducting toroidal and poloidal field coils; actively-cooled plasma-facing components; a flexible heating and current drive system; and a spacious divertor for flexibility. Substantial deuterium plasma operation is made possible with an in-vessel remote maintenance system, a lowactivation titanium vacuum vessel, and shielding of ex-vessel components. The facility will be constructed as a national project with substantial participation by U.S. industry. Operation will begin with first plasma in the year 2000.     

Real Time Equilibrium Reconstruction Algorithm in EAST Tokamak

The EAST (HT-7U) superconducting tokamak is a national project of China on fusion research, with a capability of long-pulse (∽1000 s) operation. In order to realize a longduration steady-state operation of EAST,some significant capability of real-time control is required. It would be very crucial to obtain the current profile parameters and the plasma shapes in real time by a flexible control system. As those discharge parameters cannot be directly measured,so a current profile consistent with the magnetohydrodynamic equilibrium should be evaluatedfrom external magnetic measurements, based on a linearized iterative least square method, which can meet the requirements of the measurements. The arithmetic that the EFIT (equilibrium fitting code) is used for reference will be given in this paper and the computational efforts are reduced by parametrizing the current profile linearly in terms of a number of physical parameters.In order to introduce this reconstruction algorithm clearly,the main hardware design will be listed also.