共查询到20条相似文献,搜索用时 93 毫秒
1.
结合工程实例,介绍了套筒挤压连接的原理及其特点,并从挤压连接设备、挤压工艺及工艺参数压接变形量的控制等方面,就套筒挤压连接方案的实施及其质量的验收等作了详细的阐述。 相似文献
2.
挤压注浆在上海地区的发展探讨 总被引:7,自引:1,他引:7
区分了挤压注浆和压密注浆两种注浆方法,对上海目前应用的注浆方法进行了分析,结合挤压注浆的特点讨论了发展挤压注浆的必要性和发展该方法应注意解决的问题。 相似文献
3.
带肋钢筋套筒挤压接头疲劳性能试验 总被引:1,自引:0,他引:1
《施工技术》1994,(4)
带肋钢筋套筒挤压接头是一种新型的机械接头,疲劳性能试验表明,只要合理控制挤压参数,挤压接头具有较好的耐疲劳特性,可以用于动载结构。 相似文献
4.
上世纪50年代,管道挤压连接的第一个技术形式——卡压连接技术在瑞典的诞生,结束了不锈钢水管的"贵族化"历史。卡压技术引入中国后,国内的技术人员在此基础上不断地进行了革新和改进,创建了多种无焊挤压连接技术。其中,环压连接技术的发明格外引人注目,它对卡压连接技术 相似文献
5.
6.
7.
提出了用螺旋挤压或气体挤压方式制成薄板合成石的论点,对螺旋平行排列,气体二级推压、平板托料、模拓压形和双层叠合等方式进行了讨论。 相似文献
8.
<正> 钢筋挤压连接是一种机械连接方法,其接头可靠、施工方便、工效高,广泛应用于大型、高层混凝土构造物的接头连接。钢筋挤压连接设备由液压挤压机、超高压泵站、平衡器及其它附件组成。YJ-32型钢筋挤压机是一种轻便手提式液压机具,它是挤压成型的关键施工设备,施工过程中应根据被连接的变形钢筋的规格,选择不同规格型号的挤压机。YJP-1.13型超高压泵站是挤压连接设备的动力油源,其体积紧凑、轻便、移动性能好,输出工作油压可根据所需压接力的大小来调整。主泵采用超高压柱塞泵,容积效率高,结构紧凑,压力建立快,输出工作压力可达80MPa。 相似文献
9.
钢筋挤压连接机工作原理及故障处理詹晓天,吕道松,叶明(江苏省建筑科学研究院南京)套管式钢筋挤压连接技术是建设部九五科技重点推广项目。该技术用压接机将连接套筒与两根待接钢筋紧紧压接在一起,形成永久性接头。该技术可广泛应用于高层建筑、桥梁、电站、冶金等大... 相似文献
10.
本文通过近几年对钢筋套筒挤压连接技术的推广实践 ,指出了目前此项技术应用中存在的问题 ,力求钢筋挤压连接在工程质量上的进一步提高 相似文献
11.
几种钢筋机械连接技术的比较和选择 总被引:1,自引:0,他引:1
钢筋的机械连接技术有挤压连接、锥螺纹连接、镦粗等强直螺纹连接、GK型钢筋锥螺纹接头等。比较分析钢筋螺纹接头中的问题及钢筋挤压连接技术中影响接头强度的因素,可作为不同条件下合理选择钢筋连接方法的依据。 相似文献
12.
13.
14.
岭澳核电站核岛钢筋工程中,大量采用了钢筋机械接头与锚固块。实践证明:机械接头及描固块能很好地满足了技术要求,操作简单,可加快施工进度,降低成本,经济效益较好。 相似文献
15.
16.
This paper studies the increasing importance of margin squeeze issue in the Turkish telecommunications market with a comparative assessment. Recent literature does not provide enough insight into the political economy of margin squeeze. The ideological background of the countries dominates their margin squeeze policies. The socialist experience and ordoliberal ideologies affect European Union (EU)’s margin squeeze policy. The EU policy leads to endorse margin squeeze as a standalone liability and it becomes relevant to the regulation and competition law. Turkey is one of the follower of the EU policy. However, the EU margin squeeze size does not fit to Turkey. The EU perspective is not an appropriate politically because it leads to the risk of conflict of authority. This risk has not existed yet in the EU because the EU has a supranational structure that allows the EU Commission to act as a central planner. However, the risk of conflict of authority is politically significant because Turkey is a nation state that does not allow the administrative authorities to act as a central planner. The EU margin squeeze policy is also not suitable for Turkey in terms of economics. Since, the EU approach leads to waste of resources. On the other hand, United States (US) courts endorse margin squeeze as a regulatory instrument and irrelevant to the imposition of antitrust law. The US practice seems to be more suitable for Turkey because it eliminates the risk of conflict of authority and waste of resources. The new Turkish regulatory framework on margin squeeze is more compatible with the US practices. Although the Turkish practice has formed under the influence of the Deutsche Telekom, Telefonica and Teliasonera cases, new margin squeeze regulation allows to follow the Linkline and Trinko decisions to ensure consumer welfare rather than competitors’ profitability. 相似文献
17.
基于某超长PHC管桩质量事故实例,从地质资料、场地条件、现场管理及质量控制等方面进行分析,指出深厚淤泥未经处理、挤土效应、施工控制、地质和设计因素是该事故的主要原因。 相似文献
18.
钢结构超高工业厂房的安装技术 总被引:1,自引:1,他引:0
某超高工业厂房工程,安装方案采用分段制作、运输,然后现场高空拼接的施工方案。对上、下节柱的拼接、支撑的安装、钢梁的安装,及钢结构的吊装工艺、吊装顺序、安装要点、质量控制措施进行重点阐述。实践证明:此安装方案解决了超高厂房的运输和安装问题,缩短了施工工期,降低了工程成本,提高了安装质量,取得了良好的综合效益。 相似文献
19.
以哈励逊国际和平医院综合楼工程为例,结合相关施工规范,介绍了DX挤扩灌注桩施工质量控制要点,并对其施工工艺流程进行了简要总结,以期促进DX挤扩灌注桩的推广应用。 相似文献
20.
Fábio A. Cardoso Anne K. Agopyan Carlos Carbone Rafael G. Pileggi Vanderley M. John 《Construction and Building Materials》2009,23(3):1349-1353
This paper presents a rheological investigation of pure gypsum (PG) and a commercial gypsum–lime–filler plaster (CP) using the modified Vicat apparatus and squeeze flow method. The samples were tested at several different intervals after manual or mechanical mixing. The results confirmed squeeze flow to be more sensitive in determining fresh paste behavior than the modified Vicat apparatus. PG set faster when prepared in mechanical mixer than when manually mixed. Conversely, the CP composition presented longer setting when mixed mechanically. The study also included the analysis of two ready-to-use polymer-based products for leveling and rendering (drywall joint compound – DJC; acrylic putty – AP) measured by squeeze flow and compared to the commercial composition. 相似文献