Surface Modification of Biodegradable Poly(D,L-lactic acid)by Nitrogen and Nitrogen/Hydrogen Plasma for Improving Surface Hydrophilicity

Enhancement of the surface hydrophilicity of biodegradable poly (D,L-lactic acid) (PLA) films is studied. The PLA films were treated by nitrogen plasma (PLA-N2) and nitrogen/hydrogen plasma (PLA-N2/H2), respectively. The surface properties and microstructure of PLA-N2 and PLA-N2/H2 were studied by static contact angle measurement, surface free energy calculation, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). It is confirmed that the surface hydrophilicity of PLA-N2 and PLA-N2/H2 was higher than that of pristine PLA, and the surface hydrophilicity of PLA-N2 films was better than that of PLA-N2/H2.     

Surface Modification of NiTi Alloy via Cathodic Plasma Electrolytic Deposition and its Effect on Ni Ion Release and Osteoblast Behaviors

To reduce Ni ion release and improve biocompatibility of NiTi alloy, the cathodic plasma electrolytic deposition (CPED) technique was used to fabricate ceramic coating onto a NiTi alloy surface. The formation of a coating with a rough and micro-textured surface was confirmed by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy, respectively. An inductively coupled plasma mass spectrometry test showed that the formed coating significantly reduced the release of Ni ions from the NiTi alloy in simulated body fluid. The influence of CPED treated NiTi substrates on the biological behaviors of osteoblasts, including cell adhesion, cell viability, and osteogenic differentiation function (alkaline phosphatase), was investigated in vitro. Immunofluorescence staining of nuclei revealed that the CPED treated NiTi alloy was favorable for cell growth. Osteoblasts on CPED modified NiTi alloy showed greater cell viability than those for the native NiTi substrate after 4 and 7 days cultures. More importantly, osteoblasts cultured onto a modified NiTi sample displayed significantly higher differentiation levels of alkaline phosphatase. The results suggested that surface functionalization of NiTi alloy with ceramic coating via the CPED technique was beneficial for cell proliferation and differentiation. The approach presented here is useful for NiTi implants to enhance bone osseointegration and reduce Ni ion release in vitro.     

Influence of Chemical Precleaning on the Plasma Treatment Efficiency of Aluminum by RF Plasma Pencil

This paper is aimed to show the influence of initial chemical pretreatment prior to subsequent plasma activation of aluminum surfaces.The results of our study showed that the state of the topmost surface layer（i.e.the surface morphology and chemical groups）of plasma modified aluminum significantly depends on the chemical precleaning.Commonly used chemicals（isopropanol,trichlorethane,solution of Na OH in deionized water）were used as precleaning agents.The plasma treatments were done using a radio frequency driven atmospheric pressure plasma pencil developed at Masaryk University,which operates in Ar,Ar/O₂ gas mixtures.The effectiveness of the plasma treatment was estimated by the wettability measurements,showing high wettability improvement already after 0.3 s treatment.The effects of surface cleaning（hydrocarbon removal）,surface oxidation and activation（generation of OH groups）were estimated using infrared spectroscopy.The changes in the surface morphology were measured using scanning electron microscopy.Optical emission spectroscopy measurements in the near-to-surface region with temperature calculations showed that plasma itself depends on the sample precleaning procedure.     

Influence of Different Surface Modifications on the Photovoltaic Performance and Dark Current of Dye-Sensitized Solar Cells

The TiO2 nanoporous film photoelectrode, as a crucial component of dye-sensitized solar cells, has been investigated. The photovoltaic properties and the dark current were studied by two surface modification methods. One was to apply a compact layer between the conductive glass substrate and nanoporous TiO2 film. Another was to produce TiO2 nanoparticles among the microstructure by TICl4 treatment. A suitable concentration and number of times for TICl4 treatment were found in our experiment. The dark current is suppressed by surface modifications, leading to a significant improvement in the solar cells performance. An excessive concentration of TICl4 will produce more surface states and introduce a larger dark current reversely. The dye is also regarded as a source of charge recombination in dark to some extent, due to an amount of surface protonations introduced by the interracial link in the conductive glass substrate/dye interface and dye/TiO2 interface.     

Effect of Low-Pressure Nitrogen DC Plasma Treatment on the Surface Properties of Biaxially Oriented Polypropylene, Poly (Methyl Methacrylate) and Polyvinyl Chloride Films

In this study, commercial biaxially oriented polypropylene (BOPP), polyvinyl chloride (PVC) and poly (methyl methacrylate) (PMMA) films were treated with nitrogen plasma over different exposure times in a Pyrex tube surrounded by a DC variable magnetic field. The chemical changes that appeared on the surface of the samples were investigated using Fourier transform infrared (FT-IR) spectroscopy and attenuated total reflectance Fourier transform infrared (ATR- FTIR) spectroscopy after treatment for 2 min, 4 min and 6 min in a nitrogen plasma chamber. Effects of the plasma treatment on the surface topographies and contact angles of the untreated and plasma treated films were also analyzed by atomic force microscopy (AFM) and a contact angle measuring system. The results show that the plasma treated films become more hydrophilic with an enhanced wettability due to the formation of some new polar groups on the surface of the treated films. Moreover, at higher exposure times, the total surface energy in all treated films increased while a reduction in contact angle occurred. The behavior of surface roughness in each sample was completely different at higher exposure times.     

DHDECMP-TBP/煤油萃取模拟高放废液中的裂片元素工艺研究

实验测定了22％ DHDECMP-42% TBP/OK从模拟高放皮液中萃取Zr、Mo、Cs等裂片元素的分配比，并在微型离心萃取器(转鼓φ10mm)串联台架上进行了从模拟高放废液中萃取裂片元素的工艺研究。采用6级萃取，2级洗涤，6级反萃，流比AF：AX：AS＝1：1．5：0．5，BF：BX＝1：1，实验考察了裂片元素的各级浓度分布。对Zr、Mo的净化系数DF分别为3．2、18；对Rb、Cs、DF、Ba，DF＞10^3。