Nitrosation and Nitration of Tetraacetyldibenzylhexaazaisowurtzitane

Tetraacetyldibenzylhitane (TADBIW) was subjected to debenzylation by nitrosating with inorganic materials available commercially to synthesize tetraacetyldinitrosohexaazaisowurtzitane (TADNSIW). TADNSIW was purified, and its structure was determined by FTIR, 1H NMR, MS and element analysis. The debenzylation reaction of TADBIW gave quantitative benzaldehyde as a by-product. This indicates that the reaction produces an imine cation as an intermediate. Hexanitrohexaazaisowurtzitane (HNIW) was prepared from unpurified TADNSIW with the yield over 96.0 % and the purity more than 98.0 %. And the mechanism of the reaction from TADNSIW to HNIW is proposed to be oxidation of nitroso and nitration of acetyl on the molecule of TADNSIW, This reaction system involved is simple, and the reaction can complete within a short time and under mild conditions. The product can be easily to separate and the waste disposed readily.     

A Robust Algorithm for Watermarking 2D Vector Maps with Low Shape-Distortions

The technique of watermarking has been introduced into 2D vector maps for many potential applications such as protecting the copyright of important GIS （geographical information system） data and tracing the data source of military maps. In most previous works, although the validity of the map data could be preserved during the embedding procedure, the shape-distortions of the map elements are usually neglected which would tend to degrade the invisibility of the watermarking schemes. A shape-preserving algorithm for watermarking 2D vector maps is presented in this paper. A 1D distance sequence extracted from the original map is adopted as the cover data instead of 2D coordinates. A watermark bit is represented by changing the distributions of the cover data. The embedding procedure induces lower shape-distortions than in former works. Experimental results indicate better invisibility of the proposed scheme, as well as its robustness to certain attacks such as map simplification, interpolation, additive noise and most geometric transforms.     

Open Rule-setting System Applied to Conceptual Design of Engines

Open rule-setting method advanced in this paper concentrates on providing designers of engines with a convenient way to express their design innovations and develop the expected prototypes in the early CAD stage, and constitute effective models for the following analysis process of CAE and CAPP. The problems arisen in the process of conceptual design with the traditional experience-based development method are analyzed. Based on those analyses, open rule-setting method is presented and some associated technical problems are discussed. The functional framework of open rule-setting system was built as software engineering methods. The speciality of the engine product as a kind of complex product and the requirement of the engine product based on its structural particularity to rule-setting system are considered carefully. A demonstration is supplied to illustrate how the open rule-setting method enhances the efficiency and quality of the engine conceptual design.     

Research on Linux Network Device Driver

By analyzing the working principle of Linux network device driver, discussing the Linux network driver structure and its key technologies, the general network driver structure and its design methodologies in Linux system are summarized. Through modifying the network device driver of Linux device driver 3rd version snull, c and improving the COW technology, the Zero-Copy technology in Linux （kernel version 2.6.11 ） is implemented. In the end, the success test tells us that the thorough analysis of network device driver is the foundation of many applications, and it also provides a certain improvement to a lot of real applications, even to military application development.     

Method for Measuring Velocity of Warhead Fragments Based on Photoelectric Detection

For measuring velocity and impacting position of single fragment of warhead, a non-contact measuring method is proposed, in which a six-light-screen array, a position indicator, a multi-channel chronograph and a computer are used.The principle of measurement is described. The key device of the system is a light screen array sensor which consists of six light screens allocated with certain geometrical parameters. When the fragment flies through the light screen array, the time of passing through each of the screens is recorded by the multi-channel chronograph. According to the time data and the geometrical parameters of the array, the velocity vector and the location of the fragment can be calculated immediately. The presented method can be used to locate the fragment and to measure the real velocity on its flying direction. It can also be used to measure the velocity of a fragment swarm after the system is engineered further.     

数码电子雷管中影响点火头性能因素分析

阐述了数码电子雷管中,点火药剂细结晶三硝基间苯二酚铅（LTNR）的制备工艺;从点火药剂的种类、加入黏合剂的质量分数、桥丝直径、点火头的电阻值、防潮漆的蘸涂等方面对点火头性能的影响因素进行了探讨;通过震动试验、并联起爆试验、延期精度检测与考核,试验结果表明：一次性合成的细结晶LTNR是制造数码电子雷管点火头较为理想的点火药剂,按技术要求生产的点火头性能指标能够满足行业标准要求。     

Improvement and Experiment of the Reamer in Vibra Cutter Against Wave Edge of Titanium Sheet Alloy Parts

By analyzing the influencing factors of part quality making of sheet alloy of titanium by vibra cutter, the shape of upper reamer is set as cylinder and wedge-shaped form, and the lower reamer as plain and hemicycle form, and its main structural parameters are defined as well. Then it is validated further that such improved vibra cutter reamer can be used to process curve-edged parts of titanium alloy sheet. The experimental result shows that the titanium alloy sheet parts processed by above equipment have no sharpen angles for convex parts and evident crevasse of concave-edged part. In summary, such improvement can eliminate the free-waved edge and improve the manufacture quality of titanium alloy sheet parts greatly.     

Experimental Study on the Small Flyer Initiating Behavior of Fine-grained Explosives

The initiating behavior of fine-grained explosives by small flyer is studied. The diameter of small flyer in this device is 1 ram. The test results indicate that the granularity of explosives has great effect on its flyer initiating sensitivity.The flyer initiating sensitivity of the fine-grained explosives is higher and the critical initiating energy is lower than that of common explosives. For common explosive, the flyer initiating sensitivity increases as the density is reduced. But for the fine-grained explosive, the test results are exactly opposite.     

Algorithm for Multi-laser-target Tracking Based on Clustering Fusion

Multi-laser-target tracking is an important subject in the field of signal processing of laser warners. A clustering method is applied to the measurement of laser warner, and the space-time fusion for measurements in the same cluster is accomplished. Real-time tracking of multi-laser-target and real-time picking of multi-laser-signal are introduced using data fusion of the measurements. A prototype device of the algorithm is built up. The results of experiments show that the algorithm is very effective.     

Influence of Installing Error on the Surface Shape Precision of the Axial Symmetry Aspheric Workpiece in Lapping

A method to calculate the surface shape error, which is caused by the installing error between the workpiece and the lapping tool in the process of form lapping, is proposed. The mathematical model which the installing translation error influences on the workpiece surface shape error is established. The changing rule of the error is simulated through the calculating example of the paraboloid workpiece. The results indicate that the surface shape error of the workpiece is increasing with the increase of the installing translation error, it is also increasing gradually along the center point of the curve surface to the edge, and the influence is severer to the curve surface with great curvature than that of the small curvature when the translation error is the same.     

Experimental Research on Output Performances of Giant Magnetostrictive Actuator

The paper introduces the performances of magnetostrictive actuators and its applications, discusses the design methods for the structure and internal magnetic circuit of a giant magnetostrictive actuator, and makes tests on the output displacement and force characteristics for an actuator using homemade magnetostrictive material. The experimental result shows that the actuator has satisfactory output precisions and ranges in transient and stable states, and can be used in lowfrequency vibration control system of precise equipment.     

Robust Graded Sliding Mode Tracking Control for Low Speed Spinning Ballistic Missiles

The nonlinear dynamic model of spinning ballistic missiles is established during the first boosting phase of the missile. Based on the conventional backstepping sliding mode control and the assumption of a two time-scale separation of missile dynamics, a graded sliding mode controller is designed with two sub-sliding surfaces which have invariability to external disturbances and parameter perturbations, and a matrix which comprises three first order low pass filters is introduced to prevent ＂explosion of terms＂. Owing to the upper bounds of the uncertainties are difficult to obtain in advance, adaptive laws are introduced to estimate the values of the uncertainties in real-time. Eventually, the numerical simulation results given to show the proposed controller can ensure the steady flight of missiles.     

A Study on the Estimation of Aeroheating upon the Warhead Nose at Supersonic Speed

An expression for estimating the aeroheating on a warhead nose at different supersonic speeds is proposed by incorporating CFD （computational fluid dynamics） and the least-square method. Compared with the traditional estimation formula, the expression is more accurate, convenient and can be used in the optimized design of warheads. The error from the result obtained in the test of a ball cartridge flight is less than 3 %. It satisfies the engineering requirements.     

Overview of Anti-tank Mines

First the different anti-tank mines laying possibilities are shortly summarized： hand emplaced, with mine layers, ground or helicopter relatively topographical well defined, and with cluster systems of projectiles, rockets and aircraft dispensers. Then examples of the three generations of anti-tank mines are presented：Ⅰ generation： detonating only beneath the track; Ⅱ generation： detonating beneath the track and belly; Ⅲ generation： mines with off-route actions. Weight and cost comparisons are strongly favoring the off-route Ⅲ-generation mines.     

A Finite Element Analysis on Static Strength of a Complex Section

A static finite element analysis （FEA） of an impulsive controller section is presented. The boundary condition and a part of the loads are applied. Considering the grades of the stress around the holes being large, the dense grids are adjusted accordingly. Four cases with different loads are compared, thus the influences of different loads on the section are analyzed. Numerical results show that the maximum stress of the section is lower than the strength limit of the material, and the section will not be broken with the static loads.     

Discussion on Mechanism of Breech-Blow Caused by Propellant Charge

From the view point of launch safety caused by fracture of propellant charge, this paper points out that the safety criterion of pressure wave is inadequate to evaluate the launch safety of propellant charge based on the initial negative differential pressure and sensitivity tests. Generally, the maximum barrel pressure does not depend upon the intensity of pressure wave correspondingly. The pressure wave intensity can not describe the fracture degree of propellant charge in chamber and reflect the mechanical environment of propellant charge fracturing exactly and wholly. The evaluation criterion for launch safety of propellant charge should be built on the basis of depicting the fracture degree of propellant bed.     

Design and Implementation of One Missile Visual Simulation System Based on OpenGL

The implementation of a missile＇s visual simulation system is explained that is developed with OpenGL（open graphic library） and the flight path and flight carriage in different stages of the missile are displayed. The establishment problems of the 3D scene are circumstantiated including the construction and redeployment of the model, creation of the virtual scene, setting of the multi-viewports and multi-windows etc. The missile＇s data driver, system flow, the modules and their mutual relations of the missile visual simulation system are discussed. The missile flight simulation results and effect of the scenes are given.     

Dynamic Encryption Technology in Ad-hoc Networks

A new dynamic encryption application in ad-hoc networks is proposed. The advantages of this method are its being able to use the previous ciphertext as a seed of a new encryption process, rendering the encryption process effective in all communication process by continuous dynamic key generation together with synchronization, and its capability to cut back on system bandages to a greater extent, which is valuable for the ad-hoc circumstance. In addition, the rationality and effectiveness of this novel encryption method have been verified by the test results.     

Experimental Studies of Toxicity on HNIW and Its Intermediates

The polycyclic nitramine hexanitrohexaazaisowurtane（HNIW） is a compound of high energy density. HNIW can replace 1, 3, 5-trinitro-1, 3, 5-triazacyclohexane（RDX） or HMX, hut its toxicity is unknown. In this paper, HNIW, hexabenzylhexaazaisowurtzitane （HBIW）, tetraacetyldibenzulhexaazaisowurtzitane （TADBIW）, tetraacetyldiformylhexaazaisowurtzitane（TADFIW） and tetraacetylhexaazaisowurtzitane（TAIW）, which are intermediates of the synthesis of the HNIW, were selected as the tested objects in acute toxicity test, acute eye stimulation test and skin irritation test according to the standards of ＂chemical product testing method-401 ： acute oral toxicity test＂, ＂chemical product testing means-405： acute eye irritation/corrosion test＂ and ＂chemical product testing means-404： acute dermal irritation/corrosion test＂ of National Circumstance Protect Bureau. The results show that all of the five objects have no toxicity, no stimulation to eye and skin under the tested conditions.     

Dynamic Simulation for Missile Erection System

In order to study the dynamic characteristics of the missile erection system, it can be considered as a rigid-flexible coupling multi-body system. Firstly, the actual system is abstracted as an equal and simplified one and then the forces applied to it are analyzed. Secondly, the rigid-flexible coupling dynamic simulation for erection system is accomplished by use of the system simulation software, for example Pro/E, ADAMS, ANSYS, MATLAB/Simulink, etc. Finally, having the aid of simulation results, the kinetic and dynamic characteristics of the flexible bodies in erection system are analyzed.The simulation considering the erection system as a rigid-flexible coupling system can provide valuable results to the research of its kinetic, dynamic and vibrational characteristics.