Consumer responses for tenderness and overall impression can be predicted by visible and near-infrared spectroscopy,Meullenet–Owens razor shear,and Warner–Bratzler shear force

Beef ribeye rolls (n = 40) from Select, low Choice, top (upper 2/3) Choice, and Prime quality grade carcasses were used to determine the relationship of visible and near-infrared spectroscopy (VNIR) reflectance, Warner–Bratzler shear force (WBSF), and Meullenet–Owens razor shear (MORS) with consumer responses for tenderness and overall impression. Steaks (2.54 cm) were cut and assigned to either 14 or 28 d aging (n = 4/aging period). Reflectance in the VNIR spectrum was measured 1 d from the box-date no less than 30 min after cutting, and prior to aging. The steak used for VNIR measurement was designated for WBSF and MORS measurement, whereas three adjacent steaks were cooked for evaluation by a consumer panel (n = 240 members). Steaks from the Select-grade ribeye rolls had the greatest (P = 0.06) WBSF values and lower (P < 0.05) overall impression scores than those from top Choice and Prime quality grades. Consumer panelists evaluated steaks aged 28 d as more tender (P < 0.05) than those aged 14 d. The relationship of mechanical tenderness measurements were higher with consumer panel responses for tenderness than with overall impression, and those relationships were stronger for the Select grade than for quality grades with higher degrees of marbling. The 2nd derivatives of VNIR measurements were more successful at predicting consumer panel responses of tenderness and overall impression than WBSF and MORS; thus, VNIR methodology was less invasive and more predictive than other, more traditional tenderness measurements.     

Consumer assessment of beef palatability from four beef muscles from USDA Choice and Select graded carcasses

Consumer sensory analysis was conducted to determine differences in beef palatability between two quality grade categories [Upper 2/3 (Top) Choice and Select] and four muscles [longissimus lumborum (LL), gluteus medius (GM), serratus ventralis (SV), and semimembranosus (SM)]. Generally, tenderness, flavor, and overall liking scores were more desirable for Top Choice compared to Select, regardless of muscle. Consumers rated LL as more tender (P < 0.05) than SV and SM, but similar to GM (P = 0.52). Overall and flavor acceptability were similar (P > 0.05) between LL, GM, and SV, regardless of quality grade. Consumer overall liking was most highly correlated with flavor liking (r = 0.85). When tenderness was acceptable, flavor and juiciness played a major role in determining overall acceptability. Overall liking of GM and SV from Top Choice carcasses was superior to LL from Select carcasses and comparable to LL from Top Choice carcasses.     

Trained sensory perception of pork eating quality as affected by fresh and cooked pork quality attributes and end-point cooked temperature

The present study evaluated individual and interactive influences of pork loin (n = 679) ultimate ph (pH), intramuscular fat (IMF), Minolta L∗ color (L∗), Warner-Bratzler shear force (WBSF), and internal cooked temperatures (62.8 °C, 68.3 °C, 73.9 °C, and 79.4 °C) on trained sensory perception of palatability. Logistical regression analyses were used, fitting sensory responses as dependent variables and quality and cooked temperature as independent variables, testing quadratic and interactive effects. Incremental increases in cooked temperature reduced sensory juiciness and tenderness scores by 3.8% and 0.9%, respectively, but did not influence sensory flavor or saltiness scores. An increase of 4.9 N in WBSF, from a base of 14.7 N (lowest) to 58.8 N (greatest) was associated with a 3.7% and 1.8% reduction in sensory tenderness and juiciness scores, respectively, with predicted sensory tenderness scores reduced by 3.55 units when comparing ends of the WBSF range. Modeled sensory responses for loins with pH of 5.40 and 5.60 had reduced tenderness, chewiness, and fat flavor ratings when compared with responses for loins with pH of 5.80 to 6.40, the range indicative of optimal sensory response. Loin IMF and L∗ were significant model effects; however, their influence on sensory attributes was small, with predicted mean sensory responses measurably improved only when comparing 6% and 1% IMF and L∗ values of 46.9 (dark) when compared with 65.0 (pale). Tenderness and juiciness scores, were related to a greater extent to loin WBSF and pH, and to a lesser extent to cooked temperature, IMF and L∗.     

The effect of conditioning period on loin muscle tenderness in crossbred lambs with or without the Texel muscling QTL (TM-QTL)

A Texel muscling quantitative trait locus (TM-QTL) has been identified on chromosome 18, which increases loin muscling, but may also have a negative impact on mechanically-measured loin tenderness in crossbred lambs, depending on conditioning time. This study investigated the influence of a range of conditioning times (3, 5, 7 or 9 days) on the effect of TM-QTL on loin muscle tenderness. Using Texel rams heterozygous for TM-QTL, mated to non-carrier Mule ewes, heterozygous (n = 45) and wild-type (n = 50) crossbred lambs were produced. Weight of the valuable Longissimus lumborum muscle was higher in TM-QTL carriers than non-carriers, when compared at a fixed age (+11.5%; P = 0.038), with the same trend at a fixed carcass weight (+10.2%; P = 0.064). Toughness, measured by shear force, was significantly higher in samples from TM-QTL carriers than non-carriers, after conditioning for 3 days (P = 0.002), 5 days (P = 0.003) or 7 days (P = 0.03), but was not significantly different after 9 days of conditioning (P = 0.32). Compared to non-carrier lambs, the proportion of samples above consumer acceptability thresholds for toughness was greater in the TM-QTL carrier lambs after 3 and 5 days of conditioning, similar at 7 days, but lower at 9 days. The results suggest that the negative effect of TM-QTL on loin tenderness in crossbred lambs can be overcome by conditioning for more than 7 days. Marketing of TM-QTL carrier lambs through companies that use enhanced processing protocols could be beneficial, due to higher loin muscle weights, without negative effects on meat quality.     

Color stability and tenderness variations within the gluteus medius from beef top sirloin butts

Beef top sirloin butts (n = 48) from USDA quality grade (QG; upper 2/3 US Choice vs. US Select) and yield grade categories (YG; 1 and 2 vs. 4 and 5) were aged 14 days, GM steaks were cut, with 2 steaks removed from the anterior (ANT), middle (MID) and posterior (POST) sections of the GM. One steak from each section was cut into lateral (LAT), central (CENT) and medial (MED) portions, packaged aerobically, and displayed for 7 days, whereas the second steaks were cooked to 71 °C for WBSF. Top Choice-steaks were redder and more yellow (P < 0.05) than Select steaks during display. Cooking losses were greatest (P < 0.05) in the MED, and least (P < 0.05) in the CENT, portions of GM steaks. Neither QG nor YG category affected WBSF, but differences within the GM were found for (P < 0.05) WBSF. Results of this experiment indicate tenderness and color stability gradients exist within the GM.     

Peanut skins-fortified peanut butters: Effects on consumer acceptability and quality characteristics

Peanut skins (PS), high phenolics by-products from peanut processing, are potential functional ingredients. Effects of fortification with ground PS (3 types: dry-blanched, light- and medium-roasted) on peanut butter (PB) quality characteristics and consumer acceptability were evaluated. PS were added in concentrations of 0 (control), 2.5 and 5.0 g PS/100 g PB. Data were analyzed with Mixed Model ANOVA. Significant effects (P < 0.05) on product appearance and physical characteristics depended on level of incorporation and type of skins used; the greatest impact on objective appearance (L*, a*, b* color and particulate presence) and instrumental physical properties (spreadability and texture profile analysis parameters) occurred with incorporation of 5.0 g medium roasted PS/100 g PB. Consumer sensory panelists (P < 0.05) noted an increase in stiffness with incorporation of roasted PS at both levels, and less acceptable spreadability with incorporation of 5.0 g light or medium-roasted PS/100 g PB when compared to the control. Panelists also found PS addition affected acceptability of appearance more than flavor, texture or overall acceptability. With incorporation of 2.5 g PS/100 g PB, PS addition produced PBs that equaled the control in overall acceptability, regardless of heat treatment. At the 5.0 g PS/100 g PB incorporation level, PBs containing medium-roasted PS were less acceptable (P < 0.05) than all other formulations.     

Effects of supplementing feedlot steers and heifers with zilpaterol hydrochloride on Warner–Bratzler shear force interrelationships of steer and heifer longissimus lumborum and heifer triceps brachii and gluteus medius muscles aged for 7, 14 and 21 d

Longissimus lumborum (LL) muscles from 117 steers plus LL, gluteus medius (GM), and triceps brachii (TB) muscles from 132 heifers were evaluated for effects of feeding duration of zilpaterol hydrochloride (Zilmax®; ZH; 7.56 g/907 kg on a dry matter basis) and aging time on tenderness. Both genders were blocked by initial weight into six blocks of four pens. Pens were assigned to treatments of control (C), or 20, 30 or 40 days on ZH, with a 3 day withdrawal. Steaks from each subprimal were vacuum aged individually for 7, 14 or 21 days, frozen, thawed, and cooked to 71 °C for Warner–Bratzler shear force (WBSF). All muscles from steers and heifers from ZH30 and ZH40 treatments had higher (P < 0.05) WBSF than those of C. The WBSF of steer LL and heifer TB from the ZH20 treatment was higher (P < 0.05) than C. There was a treatment by aging interaction (P > 0.05) for WBSF of GM steaks from heifers. Percentage of intramuscular fat had little effect on tenderness. Percentages of steer LL and heifer TB steaks with WBSF values below thresholds of either 5.0 or 4.6 kg from the ZH20 treatment were quite high, whereas percentages of heifer LL and GM muscles below 5.0 kg (67%) and 4.6 kg (57%) were low. Feeding ZH ? 20 days generally increased WBSF values, but mean WBSF values for steer LL and heifer TB were below 4.6 kg. Feeding ZH 20 ? days resulted in >40% of GM steaks with WBSF values above 4.6 kg.     

Disparity of dietary effects on collagen characteristics and toughness between two beef muscles

Manipulation of growth rate and/or diet has been shown to affect protein turnover and may be used to improve beef quality. This trial was conducted to evaluate the effects of average daily gain (ADG) and diet on animal performance, collagen characteristics and beef quality of two different muscles; longissimus dorsi (LD) and semitendinosus (ST). Seventy six Hereford and Angus steers were assigned to three dietary management regimens for finishing: high grain diet based on corn (n = 28), alfalfa pasture (n = 22) and grass pasture (n = 26). Average daily gains were greater (P < 0.001) in Herefords vs. Angus and for corn- vs. pasture finished cattle. Overall, total collagen content was greater (P < 0.001) and the percentage of total collagen that was heat soluble was lower (P < 0.0001) for ST than for LD muscle. The lowest (P < 0.05) values for both total and heat soluble collagens were found in animals finished on corn. WBSF values for LD were greater (P < 0.01) in grass-fed vs. alfalfa- and grain-finished cattle while there was no difference in WBSF values for ST between grass- and corn-fed animals. No correlation between ADG and WBSF was observed for any muscle. ADG was not correlated with collagen solubility in ST, but was correlated (P < 0.05) with collagen solubility in LD. A key finding is that growth rate affected heat soluble collagen in the two muscles to a different extent. In conclusion, this study shows that different feeding strategies may not influence the tenderness of all muscles in a similar way.     

Effects of cooked temperature on pork tenderness and relationships among muscle physiology and pork quality traits in loins from Landrace and Berkshire swine

The effect of, and associations between, loin muscle morphology and pork quality indicator traits were assessed at three cooked temperatures in loin chops from 38 purebred Berkshire and 52 purebred Landrace swine. Three loin chops from each pig were randomly assigned to cooked temperature treatments of 62, 71, or 79 °C and loin tenderness was assessed as Warner–Bratzler shear force (WBSF). Cooked temperature (P < 0.001), breed (P < 0.001) and breed × cooked temperature (P < 0.001) effects influenced loin chop WBSF, whereby WBSF increased as cooked temperature increased. Chops from Landrace pigs had greater WBSF at each cooked temperature compared with chops from Berkshire pigs. Chops from Landrace pigs became less tender with increasing cooked temperature, whereas chops from Berkshire pigs became less tender only when cooked to 79 °C. In loins from Landrace pigs, Minolta a1 at 62 °C (R² = 0.07), and average muscle fiber diameter at 71 °C and 79 °C (R² = 0.07 and 0.24, respectively), contributed to WBSF variation. In contrast, for loins from Berkshire pigs, loin ultimate pH and intramuscular fat percentage accounted for 27% and 30% of the variation in WBSF at 62 °C and 71 °C, respectively, and loin ultimate pH accounted for 7% of variation in WBSF at 79 °C. Results suggest that loins from Berkshire pigs have properties that resist toughening at greater cooked temperatures and that associations between quality measures and loin tenderness differ between Landrace and Berkshire pigs.     

The effects of different cooking regimes on the cook yield and tenderness of non-injected and injection enhanced forequarter beef muscles

The aim was to investigate the effect of different cooking regimes on the cook yield and tenderness of non-injected and brine injected (0.5% residual NaCl) bovine M. triceps brachii caput longum (TB), M. supraspinatus (SP) and M. pectoralis profundus (PP). Injected and non-injected TB, SP and PP muscle sections (400 g) were (a) conventionally oven cooked to 72 °C or cooked slowly (using a Δ10 programme) to 72 °C or (b) cooked in a water bath to 72 °C or cooked in a water bath to 55 °C and held at this temperature for 2 h before heating to 72 °C. In addition, injected PP muscle sections were oven cooked to 69 °C and held at this temperature for up to 12 h. Slow cooking using a Δ10 programme had no significant (P < 0.05) effect on WBSF values of injected or non-injected SP and TB muscles but significantly (P < 0.05) decreased the WBSF values of injected and non-injected PP muscles when compared to conventional cooking. Slow cooking significantly (P < 0.05) increased % cook yield of injected PP, SP and TB muscles. Staged cooking significantly (P < 0.05) decreased the WBSF values and had no significant effect on sensory tenderness ratings of non-injected TB, SP and PP muscles and injected PP muscles. Staged cooked injected or non-injected PP, SP and TB muscles had lower % cook yield values than those cooked straight to 72 °C. Increasing the cooking time of injected PP muscles at 69 °C to 8 and 12 h decreased % cook yield, decreased WBSF values and increased sensory tenderness ratings. It also alleviated the problem of residual chewiness which was evident in PP muscles cooked using the other regimes.     

Eating quality of beef from biotypes included in the PGI “Ternera Asturiana” showing distinct physicochemical characteristics and tenderization pattern

Different biotypes of the Protected Geographical Indication (PGI) “Ternera Asturiana” were studied to determine if their differences in physicochemical characteristics and tenderization pattern during maturation (3 to 21 days) had an effect on the consumer evaluation of beef palatability. Biotype affected significantly pH, water holding capacity, chemical composition (P < 0.001) and meat lightness (P < 0.05). Ageing time affected significantly (P < 0.05) colour, meat toughness and sensory attributes in a different way within each biotype. Multivariate analysis showed two different meat groups: 1) meat from mh-genotypes, characterized by high juice losses, lightness (L*), protein content and high sensory acceptability at intermediate (7 and 14 days) ageing times; 2) meat from rustic (AM) breed and biotypes free of myostatin mutation (AV (+/+) and AV × AM), showing higher intramuscular fat, myoglobin content, and instrumental toughness and requiring longer storage times (21 days). This should be taken into account for the proper post-mortem management and commercialization of each product to achieve its best sensory quality.     

Dietary lecithin improves dressing percentage and decreases chewiness in the longissimus muscle in finisher gilts

The influence of dietary lecithin at doses of 0, 4, 20 or 80 g/kg fed to finisher gilts for six weeks prior to slaughter on growth performance, carcass quality and pork quality was investigated. M. longissimus lumborum (loin) was removed from 36 pig carcasses at 24 h post-mortem for Warner–Bratzler shear force, compression, collagen content and colour analyses. Dietary lecithin increased dressing percentage (P = 0.009). Pork chewiness and collagen content were decreased by dietary lecithin (P < 0.05, respectively), suggesting that improved chewiness may be due to decreased collagen content. However, dietary lecithin had no effect on shear force, cohesiveness or hardness (P > 0.05, respectively). Dietary lecithin reduced loin muscle L* values and increased a* values (P < 0.05, respectively) but no changes on b* values (P = 0.56). The data showed that dietary lecithin improved dressing percentage and resulted in less chewy and less pale pork.     

Carcass, sensory, fat color, and consumer acceptance characteristics of Angus-cross steers finished on ryegrass (Lolium multiflorum) forage or on a high-concentrate diet

Fall-born Angus-cross steers (n = 30) from 1 of 2 sires, were randomly assigned to either an 85% corn, 7.5% cotton-seed hulls, and 7.5% vitamin/mineral/urea supplement diet (GRAIN), 100% ryegrass grazing (RG), or ryegrass grazing then the GRAIN diet for 94 d (RG/GRAIN). USDA Yield Grade of steers finished on either the GRAIN or RG/GRAIN regimens were higher (P < 0.02) compared to those finished on RG. Marbling score and USDA Quality Grade did not differ (P = 0.21 and 0.12, respectively) among the three finishing regimens. Yellowness (b^∗) values of the subcutaneous fat from both strip loins (SL) and ribeye (RE) rolls was lowest (P < 0.05) in cuts taken from steers finished on GRAIN. Subcutaneous fat of both SL and RE had lower L^∗ and hue angle values, and higher a^∗ and b^∗ values before trimming than after the fat was trimmed to 0.3 cm. Initial and sustained tenderness scores of SL from steers finished on GRAIN were higher when compared to RG/GRAIN or RG regimens (P < 0.05). Flavor intensity and beef flavor scores were higher (P < 0.05) for SL from GRAIN- or RG/GRAIN-finished steers compared to RG-finished steers. GRAIN SL had lower (P < 0.05) WBSF values than RG, but similar (P > 0.05) to RG/GRAIN. Trained sensory tenderness and flavor scores and WBSF values for RE were not affected by finishing regimen (P > 0.05). GRAIN steaks had a higher consumer overall acceptability score, average price/kg, and rank (P < 0.05). While carcass, fat, and sensory disadvantages were present in RG cattle, the overall magnitude of the differences compared to GRAIN cattle was fairly small.     

Fishmeal-based diet decreases the redness of sunshine bass (Morone chrysops × Morone saxatilis) fillets

The objectives of the present study were to determine the effects of feeding a fishmeal-based diet on color attributes and lipid oxidation in sunshine bass (Morone chrysops × Morone saxatilis) fillets during retail display. A balanced diet containing 30 percent fishmeal (FM) or a diet containing poultry byproduct meal as a complete replacement of fishmeal (PB) was fed to sunshine bass for fifteen months. Harvested fish were filleted, overwrapped with polyvinyl chloride film and stored at 2 °C (REF) or over ice (ICE), under an illuminated retail display. Samples (n = 6) were analyzed after 0, 3, 6, or 9 d storage for color attributes (CIE L^∗, a^∗, b^∗, hue angle and chroma), thiobarbituric acid-reactive substances (TBARS), and pH. TBARS and pH increased (P < 0.05) during storage, indicating progress in lipid oxidation and protein changes. FM fillets demonstrated lower (P < 0.05) a^∗ (redness) value and greater (P < 0.05) hue angle than PB fillets. Since consumer acceptance of sunshine bass is dependant upon its white flesh, fishmeal supplementation could be used as a dietary strategy to improve fish marketability.     

Effects of pregnancy and feeding level on carcass and meat quality traits of Nellore cows

Carcass and meat quality traits of 16 pregnant and 5 non-pregnant cows fed at 1.2 times maintenance and 16 pregnant and 6 non-pregnant fed ad libitum were evaluated. Pregnancy did not affect final body weight (FBW; P = 0.0923), cold carcass yield (CCY; P = 0.0513), longissimus muscle area (LMA; P = 0.8260), rib fat thickness (RFT; P = 0.1873) and shear force (WBSF; P = 0.9707). A lower FBW (P = 0.0028), LMA (P = 0.0048) and RFT (P = 0.0001) were observed in feed restricted cows. However, no differences were found for CCY (P = 0.7243) and WBSF (P = 0.0759) among feeding level groups. These data suggests that carcass and meat quality traits are not affected by pregnancy status in Nellore cows. Moreover, although cows experiencing feed restriction did have reduced deposition of subcutaneous fat and lean tissue, there were no major impacts on meat quality traits.     

The effect of hot-boning and reduced added phosphate on the processing and sensory properties of cured beef prepared from two forequarter muscles

The functionality of pre-rigor beef was investigated in terms of the effects of phosphate reduction and curing of hot-boned meat on the processing and sensory properties of relatively low-value muscles, M. infraspinatus (IS) and M. pectoralis profundus (PP), from the forequarter. Muscles were excised within 90 min post-mortem (HB) or, from chilled carcasses, 24 h post-mortem (CB), and were injected to 115% of green weight with brine containing phosphate and were vacuum tumbled continuously for 2 h. Hot-boning gave lower total yield of cooked meat for both muscles. Hot-boned PP joints had slightly higher (P < 0.05) cook loss than cold-boned. Reduction of added phosphate (from sodium tri-polyphosphate) from 0.3% to 0.15% of cured meat had detrimental effects on colour; joints containing the conventional 0.3% were lighter (P < 0.001) and redder for both muscles. Hot-boning gave PP joints which were rated less tender by sensory panels, corresponding with higher (P < 0.001) hardness TPA values, higher (P < 0.05) Warner–Bratzler shear force (WBSF) values and shorter (P < 0.05) sarcomere lengths. Effects of phosphate level and boning method were less in IS joints. In these, hot-boning gave products that were rated by sensory panel as slightly more tender but there was no effect on TPA or WBSF values. Furthermore, total yields from hot-boned products did not reflect the expected increase in functionality and reducing added phosphate during processing had a detrimental effect in binding and forming of joints.     

Effect of exposure to light on physico-chemical quality attributes of sliced dry-cured Iberian ham under different packaging systems

Dry-cured Iberian ham slices were stored under vacuum and under two different atmospheres (N₂ = 70% N₂ + 30% CO₂; Ar = 70% Ar + 30% CO₂) and exposed to lightness or darkness. Physico-chemical, sensory and microbial analysis was carried out throughout 60 days storage. Vacuum samples showed the highest a*-value compared to N₂ and Ar after 30 (P < 0.05) and 60 days (P < 0.05). The influence of illumination during storage was evident after 60 days of storage, L* and a*-values being lower (P < 0.01) in hams exposed to light than those kept in darkness, which can be ascribed to the lower nitrosylmioglobin content in samples exposed to light after 60 days (P = 0.001). Ham slices stored in darkness showed the lowest TBARS values (P < 0.05) and hexanal content (P < 0.05) after 60 days. Slices of ham packed in vacuum showed lower TBARS values than N₂ and Ar batches (P = 0.001), these samples being perceived as more rancid (P < 0.05). The rest of the sensory attributes were not generally affected by gas mixture or illumination (P > 0.05).     

CONSUMER EVALUATION OF THE PALATABILITY OF USDA SELECT,USDA CHOICE AND CERTIFIED ANGUS BEEF STRIP LOIN STEAKS FROM RETAIL MARKETS IN LUBBOCK,TEXAS, U.S.A.

ABSTRACT

Select, Choice and Certified Angus Beef (CAB) strip loin steaks were sold in Lubbock, TX to determine consumer acceptability. A home survey was attached to each package of steaks (return = 191 steak evaluations). Consumers did not detect differences in tenderness or flavor, but rated CAB steaks juicier (P < 0.05) than Select or Choice. However, 68% of CAB consumers rated steaks as extremely or very tender, but less than half rated Choice and Select steaks the same way. Consumer tenderness and flavor scores for Select steaks were more variable, but consumer satisfaction and tenderness acceptability did not differ (P > 0.05) between grades. Trained sensory panelists rated CAB steaks higher (P < 0.05) than Choice or Select for all palatability traits except flavor intensity. Shear force decreased (P < 0.05) by quality grade as CAB steaks sheared with the least resistance. These results showed marbling influenced objective palatability measures and decreased the variation in both objective and consumer measures of palatability.

PRACTICAL APPLICATIONS

Quality grades were established to predict beef palatability, but marbling can be an unreliable predictor of tenderness. Branded beef programs, such as Certified Angus Beef (CAB), have been developed to distinguish higher palatability products and provide more consistent products for consumers. Consumers can distinguish between levels beef tenderness and are willing to pay a premium for tender beef. Moreover, consumers find product consistency is moderately important when purchasing fresh beef. Therefore, the purpose of this study was to determine consumer acceptability based on in‐home evaluations of strip loin steaks from United States Department of Agriculture Select and Choice grades and CAB purchased from a retail supermarket environment.

     

A comparison of needle-free and needle-injection methods and solutions for enhancement of beef longissimus lumborum muscles

In Experiment 1, beef strip loins (n = 15) were halved and assigned to needle (N) or needle-free (NF) injection enhancement with a phosphate plus salt solution (PS) to determine effects on color, water-binding, and palatability. Pump yields tended (P = 0.08) to be higher for NF injection. Needle-injected steaks were darker (P < 0.05) on day 1 only. The NF treatment had greater instrumental tenderness and intensity of off-flavors but less cooking loss and beef flavor (both P < 0.05). In Experiment 2, strip loins (n = 28) were halved and assigned to one of four treatments: (1) N, or (2) NF injection with PS; (3) N, or (4) NF injection with a calcium lactate solution (CL) to determine effects on water-binding and palatability. Needle-free injection resulted in a greater incidence (P < 0.05) of off-flavors and abnormal texture. The PS solution resulted in greater (P < 0.05) instrumental, myofibrillar, and overall tenderness; greater juiciness; greater incidence of off-flavors and abnormal texture; and less (P < 0.05) connective tissue and cooking losses than CL. The PS and NF combination had the highest pumped yields and least cooking losses (both P < 0.05). Enhancing beef strip loins with PS and NF injection has potential to improve yield, tenderness, and juiciness but harm texture and flavor.