Pasta products made from sweetpotato fortified with soy protein

Sweetpotato flour (Beauregard cultivar) was treated with sodium hydroxide solution and then fortified with defatted soy flour (DSF) or soy protein concentrate (SPC) at levels of 0, 15, 30, and 45 g/100 g. Pasta made from 100 g/100 g alkaline-treated sweetpotato flour (ASPF) had the lowest cooking loss (9.9 g/100 g) with the highest firmness (1.8 N). Cooking loss increased as levels of DSF and SPC increased (from 9.9 to 16.6 g/100 g). Addition of DSF and SPC increased the lightness (“L*” value) from 40.6 to 48.7, and decreased the redness (“a*” value) from 21.6 to 15.2. Substitution of DSF and SPC decreased firmness from 1.8 to 0.4 N, cohesiveness from 0.6 to 0.5 and springiness from 1.2 to 1.1 mm. Pasta made from 100% ASPF had highest β-carotene content (9.0 mg/100 g). The β-carotene contents decreased from 7.9 to 2.7 mg/100 g as the levels of DSF and SPC increased.     

Functionality of soymilk powder and its components in fresh soy bread

ABSTRACT:  The physicochemical changes upon addition of soymilk powder (SMP) to soy bread were investigated. Two-pound loaves of soy bread were produced with components (soluble fiber [SF], insoluble fiber [ISF], soy protein) that mimic those levels contributed by SMP. Soy flour and soy flour/SMP soy breads served as controls. The following were determined for all breads produced: physical properties (loaf volume, crust, and crumb color); chemical compositions (SF and ISF contents, protein and ash contents); and physicochemical properties (water activity, total moisture content by thermogravimetric analysis [TGA], "freezable" water [FW], "unfreezable" water [UFW] content by DSC, stiffness at 25 °C by dynamic mechanical analysis [DMA], and firmness with Instron testing machine). SMP contained significant amounts of SF aside from the ISF fraction and mostly denatured soy protein. SMP addition to soy bread formulation significantly decreased loaf volume with respect to control soy bread, which can be attributed to the ISF and SPI contents of this ingredient. Other effects of SMP were found to be lighter and yellowish crumb color, darker crust color, and increase in firmness, as well as no change in moisture content, FW and UFW contents, water activity, and stiffness parameters.     

Antioxidant effects of soy sauce on color stability and lipid oxidation of raw beef patties during cold storage

This study was conducted to evaluate the antioxidant effects of soy sauce on lipid oxidation and color stability of raw beef patties. Raw beef patties were formulated with four solutions such as NaCl (sodium chloride solution), NaCl/SS (1:1 ratio of sodium chloride and soy sauce solution), SS (soy sauce solution), or SS/A (soy sauce solution combined with 0.05% ascorbic acid) in the same salt concentration. Addition of soy sauce resulted in the decreased pH, lightness, and increased yellowness. Treatment SS/A had the lowest percent of metmyoglobin during storage (P < 0.05). A reduction (P < 0.05) in the 2-thiobarbituric acid, peroxide, and conjugated diene concentration as result of soy sauce addition were observed in treatments SS and SS/A at the end of the storage period. There were no differences (P > 0.05) in free fatty acid concentration at the end of storage. The combined addition of soy sauce and ascorbic acid greatly improved (P < 0.05) color stability and retarded lipid oxidation.     

Preparation of isoflavones enriched soy protein isolate from defatted soy hypocotyls by supercritical CO2

Soy hypocotyls, the byproduct from soy protein industry, rich in isoflavones, was attempted to develop into a value-added functional food, soy protein isolate (SPI). Soy hypocotyls were defatted by supercritical CO₂ (SC-CO₂) under the following conditions as 35 MPa, 2 h, 45 °C with a constant flow rate of CO₂ at 5 l/min, fed from the bottom of the extraction vessel. Via extraction, the oil contents were lowered from 10.5 g/100 g in original soy hypocotyls to 0.2 g/100 g in defatted soy hypocotyls (DSH) with a Protein Dispersibility Index (PDI) value of 91.2 that contained about 2.18 g/100 g of isoflavones and 63.6 g/100 g of proteins. SPI was then extracted from DSH under the optimized conditions including: the pH of water solution at 6, the ratio of DSH to water solution as 1:10 and the extraction temperature at 30 °C with the extraction time of 30 min. The freeze-dried SPI contained 92.46 g/100 g of the proteins and 640 mg/100 g of isoflavones, where the three major β-glycosides, glycitin, daidzin and genistin accounted for about 83.7% of the total isoflavones. The yields of SPI and isoflavones were about 48% and 30% in terms of their respective total contents in DSH.     

Physicochemical and sensory properties of soy bread made with germinated,steamed, and roasted soy flour

For the development of healthful gluten-free soy bread acceptable to consumers, we evaluated the effects of various processing procedures for soy flour on bread quality, in terms of beany flavour and texture. We pretreated soy flour by both non-heating (raw:NS and germinated:GS) and heating (steamed:SS and roasted:RS) methods. In addition, to improve the loaf volume, we added 1% hydroxypropyl-methylcellulose (HPMC) to RS flour. Lipoxygenase activity was retained in the non-heat-treated flours (279 U/g for NS and 255 U/g for GS), but was significantly reduced in the heat-treated flours (106 U/g for SS and 69 U/g for RS). Moreover, heat-treated flour had higher isoflavone and ferric reducing antioxidant power than had non-heat-treated flour. However, RS flour had the lowest moisture content and lowest L^∗ value. The GS bread had the highest specific loaf volume (3.53 cm³/g), followed by NS (2.96 cm³/g), RS (2.25 cm³/g), and SS (1.81 cm³/g) bread. GS bread had the lowest hardness (1.53 N), followed by NS (1.65 N), RS (2.00 N), and SS (3.75 N) bread. The addition of 1% HPMC to RS increased the loaf volume (2.44 cm³/g), but decreased the bread’s hardness (1.80 N). As to the sensory properties, the bread with heat-treated flour was perceived to have a less beany odour and taste than was the bread with non-heat-treated flour. However, the latter had a better appearance than the former. These results indicated that soy flour pretreatment could enhance the loaf volume and reduce the beany flavour of whole soy bread.     

Effect of high pressure treatment on aggregation and structural properties of soy protein isolate

The aggregation and structural properties of soy protein isolate (SPI), induced by high pressure (HP) treatment at 200-600 MPa were investigated by size-exclusion chromatography combined with multi-angle laser scattering (SEC-MALLS) and fourier transform infrared (FTIR) spectroscopy. HP treatment at lower pressure level (e.g., 200 MPa) resulted in formation of marked insoluble aggregate of SPI, while the treatment at higher pressure level (e.g., 600 MPa) led to transformation of insoluble aggregate to soluble one. The soluble aggregate formed at 400 or 600 MPa had much less mean molecular weight (MW) (about 5.2 × 10⁶ g/mol) than that at 200 MPa (about 1.6 × 10⁷ g/mol), and was also much more homogenous in MW distribution. FTIR analyses confirmed changes in secondary and tertiary structures, induced by HP treatment. These results can provide direct evidence or explanation for HP-induced modification of soy proteins.     

Mechanical properties and water vapor permeability of edible films made from fractionated soy proteins with ultrafiltration

Soy protein isolates (SPI) were fractionated by ultrafiltration unit equipped with 100 and 300 kDa cutoff size membranes. Glycerol-plasticized fractionated soy protein films were developed by casting methods. Mechanical, moisture barrier and physical properties of films, as affected by molecular weight of soy protein fraction, were investigated. Tensile strength and percent elongation at break of films increased with molecular weight of soy proteins. However, molecular weight variation did not influence the water vapor barrier properties of films. Protein solubilities of fractionated films were in the range of 3.5-4.6 g/100 g of dry film, whereas 11.9 g of proteins were solubilized from 100 g of dry SPI film. Hunter b value of fractionated protein films decreased with molecular weight of soy protein.     

Cross-linked soy protein as material for biodegradable films: Synthesis, characterization and biodegradation

The modification of soy protein isolate (SPI) with different amounts of a naturally occurring cross-linking agent (genipin, Gen) and glycerol used as plasticizer was carried out in this work. The films yielded were cast from heated and alkaline aqueous solution of SPI, glycerol and Gen and then dried in an oven. Total soluble matter, water vapor permeability and mechanical properties were improved by adding small amounts of Gen. These properties were not significantly affected (P ? 0.05) by additions exceeding 2.5% (w/w of SPI). The opacity and cross-linking degree were linearly increased with the addition of Gen, whereas the swelling ratios in water were decreased. All the films were submitted to degradation under indoor soil burial conditions and the weight loss of the films was measured at different times. This study revealed that the film biodegradation time can be controlled or modified from at least 14 to 33 days. The tests performed showed the potential of Gen to improve the SPI film properties, in which the possibility of employing such new films as biodegradable food packaging was raised.     

Thermal stability of soy protein isolate and hydrolysate ingredients

The objective of this study was to characterize the effects of pH, protein concentration and calcium supplementation on thermal stability, at 140 °C, of soy protein isolate (SPI) and soy protein hydrolysate (SPH) ingredients. Increasing pH between 6.4 and 7.5 led to significantly (p < 0.05) higher mean heat coagulation times (HCTs) at 140 °C, for all soy protein ingredients at 1.8, and 3.6% (w/v) protein. Increasing protein concentration from 1.8 to 7.2% (w/v) led to shorter HCTs for protein dispersions. Calcium supplementation up to 850 mg/L, except in the case of supplementation of SPI 1 with calcium citrate (CaCit), decreased HCT for soy protein ingredient dispersions, at pH 6.4 – 7.5. No significant differences (p < 0.05) were found in mean HCT for dispersions supplemented with calcium chloride (CaCl₂) and those supplemented with CaCit at 450, 650 and 850 mg/L Ca²⁺, in the pH range 6.4–7.5.     

Daidzein and genestein contents in tempeh and selected soy products

The total isoflavones in tempeh and selected local soy products was determined. Raw tempeh contained 26 ± 6 mg daidzein (Da) and 28 ± 11 mg genestein (Ge) while fried tempeh contained 35 ± 11 mg Da and 31 ± 11 mg Ge in 100 g (wet basis). Total isoflavone content in 100 g of raw tempeh, based on a dry weight, was 205 ± 56 mg and significantly reduced to 113 ± 41 mg in 100 g of fried tempeh. Tempeh in batter was deep-fried for 30 min which reduced 45% of the total isoflavone content compared to the raw one. Raw tempeh contained the highest total content of isoflavone among the studied local soy products. Total isoflavone content in processed soy foods like egg tofu and home made soybean drink were significantly lower than other soy products studied.     

Antioxidant properties of aqueous and methanol soy extracts in minced trout muscle

Antioxidant capacity of freeze-dried aqueous and methanolic extracts of soy protein isolate (SPI) and soybean meal (SBM) were assessed by 2, 2′-Diphenyl-1-picrylhydrazyl (DPPH) assay and total phenolic content (TPC). Caffeic and chlorogenic acids in liquid aqueous extracts, and genistein and daidzein in liquid methanolic extracts were measured by HPLC. Freeze-dried extracts were applied (1000 and 4000 μg/g) to trout mince and TBARS formation monitored during 14 days refrigerated storage. SBM aqueous extracts-treated mince (4000 μg/g) had significantly lower (P < 0.05) TBARS than all other treatments. SPI methanolic extract had the highest TPC (100 mg chlorogenic acid equivalents/100 g extract) and genistein and daidzein contents. SPI aqueous extracts had the highest chlorogenic acid (280 μg/g) while SBM aqueous extracts had the highest caffeic acids content (484 μg/g). SPI had the best in vivo antioxidant profile. SBM extracts were most effective at retarding lipid oxidation in refrigerated trout mince.     

Production of soy protein isolates with low phytic acid content by membrane technologies: Impact of the extraction and ultrafiltration/diafiltration conditions

The content of the antinutrient, phytic acid, of soy protein was analyzed during their extraction and purification by a series of ultrafiltration and diafiltration steps. The phosphorus content of the extracts was used as an indication of their phytic acid content and their ash content as an indication of their mineral content. The extraction of soy proteins was conducted by using a 2³ factorial experimental design, pH (7.5 or 9), solvent (0.06 M KCl or water), and temperature (25 °C or 50 °C). The most promising extraction conditions were 0.06 M KCl/pH 9.0/25 °C for the lowest phosphorus to protein ratio (12.2 ± 0.1 mg P/g protein) and H₂O/pH 9.0/50 °C for the combination of low phosphorus to protein ratio and the lowest ash content (13.9 ± 1.2 mg P/g protein, 9.6 ± 0.8% w/w ash content). After extraction, soy proteins were purified by sequential ultrafiltration (UF) with a volume concentration ratio (VCR) of 5 and diafiltration (DF) with volume diafiltration ratio (VD) of 4. Extracts were purified with no pH adjustment or with pH adjustment to 6.5 between the UF and the DF steps. The extraction conditions 0.06 M KCl/pH 9.0/25 °C and the purification conditions UF pH 9.0/DF pH 6.5 showed the lowest phosphorus to protein ratio (4.4 ± 0.3 mg P/g protein) and reduced membrane fouling when compared to extraction conditions with water.     

Effect of processing,fermentation, and aging treatment to content and profile of phenolic compounds in soybean seed,soy curd and soy paste

This study reports the effect of processing, fermentation, and aging treatment on the content and profile of 43 phenolic compounds in soybean seeds, soy curd (tofu), and soy paste (ChungGukJang, CGJ). Mean content of phenolic compounds was ranked as soybean seed = CGJ aged for 3 days (CGJ-3D) = CGJ aged for 6 days (CGJ-6D) > tofu (P < 0.0001). Low percent recovery (47.1%) of phenolic compounds in tofu was due to heating (boiling), leaching in water, filtering, coagulation, and whey exclusion during tofu making. Aging period did not affect the mean contents of 43 phenolic compounds in the CGJ, whereas it affected the phenolic acids contents in the CGJ (P < 0.01). Benzoic, ferulic, chlorogenic, gentisic, protocatechuic, or β-Resorculic acid was major phenolic compounds in soybean seeds, tofu, CGJ-3D, or CGJ-6D. Especially, the CGJ-3D contained large amounts of isoflavone aglucons and phenolic acids compared to soybean seeds or tofu.     

添加豆浆对牦牛酸奶品质的影响

将不同添加量（0、20%、40%、60%）豆浆添加到牦牛乳中制备豆浆-牦牛酸奶,探讨不同添加量豆浆对牦牛酸奶理化指标、贮藏期内酸度、质构特性（硬度、稠度、黏聚性与黏性指数）、持水力、乳酸菌数和感官特性的影响。结果表明,在贮藏期内（1～14 d）,随着豆浆添加量在0～60%范围内增加,牦牛酸奶酸度、持水力、质构特性、乳酸菌数均有所下降。添加20%豆浆制备的牦牛酸奶蛋白质、脂肪及非脂乳固体含量分别为3.28 g/100 g、4.58 g/100 g、8.76 g/100 g,乳酸菌数＞107 CFU/mL,感官评分为87.9分,其酸度、持水力、质构、乳酸菌数等与未添加豆浆的对照相比均无显著差异（P＞0.05）。因此,在牦牛乳中添加20%的豆浆制备豆浆-牦牛酸奶是可行的,可进一步推广应用。     

Role of soy lecithin on emulsion stability of dairy beverages treated by ultrasound

The objective of this work was to evaluate the impact of soy lecithin during the formation and stability of oil‐in‐water ultrasound emulsions. Pre‐emulsions formulated with either 0%, 0.025% and 0.05% of soy lecithin were sonicated at different acoustic intensities (42–70 W/cm²) for 5 min. Dynamic rheology showed an improved stability of the ultrasound emulsions at high acoustic intensity and without soy lecithin, displaying a distinctive viscoelastic region and a behaviour of weak gel. During 21 days of storage at 4°C, the particle size slightly increased (470–500 nm), while the mechanical spectra remained unchanged. The outcomes of this investigation suggest that ultrasound can be used as manufacturing aid for the formulation of dairy‐based emulsions.     

Introduction and nutritional evaluation of germinated soy germ

Germinated soy germ (GSG) were developed and evaluated for their nutritional value. Separated soy germ was germinated at room temperature for 24 h under running water. As germination progressed, the protein and fibre content of GSG increased slightly, while the lipid and carbon to nitrogen (C/N) ratio decreased; free amino acids including GABA increased considerably while free sugars decreased. Linoleic and linolenic acid were the most abundant unsaturated fatty acids in soy germ, and slight changes were observed in GSG. The tocopherol and isoflavone contents showed a rapid increase of 32.4% and 27.9%, respectively, during germination. The abundance of GABA, isoflavones and tocopherols demonstrates the high nutritional value of GSG and suggests that GSG can be utilised as a reasonable and effective source of healthy foods.     

Catastrophic inversion and rheological behavior in soy lecithin and Tween 80 based food emulsions

Emulsions inversion occurs in many industrial processes and may be influenced by the formulation conditions, composition and emulsification protocols. In this work, the influence of emulsifiers and stirring on catastrophic inversion (O/W to W/O) was evaluated. Emulsions were prepared with different stirring rates, using soy lecithin and Tween 80, at 2 and 5 wt%. The aqueous phase was distilled water with 1 wt% NaCl and the oil phase was soy oil. These emulsions were analyzed by conductivity, stability, microscopy and rheology assays. The most stable emulsions presented inversion with a smaller amount of the external phase. Rheological analysis showed that, with a higher concentration of emulsifier, it is better to use Tween 80 when lower viscosity is desired, while soy lecithin is more appropriate for higher viscosity products. The oscillatory tests showed that while the emulsions prepared using Tween 80 exhibited concentrated solution behavior, those prepared with soy lecithin exhibited strong gel behavior.     

Effect of defatted maize germ flour addition on the physical and sensory quality of wheat bread

Maize (Zea mays L.) processing produces large quantities of defatted maize germ (DMG) that is being used mainly for animal feed. The objective of this study was to exploit use of this nutrient-rich by-product in bread by replacing wheat flour at 5-20 g/100 g levels. Breads prepared with wheat-DMG flour blends were analyzed for loaf volume, density, instrumental dough hardness and bread firmness, Hunter color (“L”, “a”, “b”, chroma, and hue angle), and selected sensory attributes. Loaf volumes decreased significantly, from 318.8 ml to 216.3 ml, as the DMG flour supplementation was increased from 0 to 20 g/100 g; a similar effect was observed for bread specific volume. Increase in dough hardness (7.56-71.32 N) was directly related to increase in DMG flour levels. Instrumental firmness values were significantly higher for breads containing DMG flours, 61.58 N in 20 g/100 g DMG bread versus 32.84 N for the control bread, made with wheat flour only. The control bread was lighter in color, as shown by higher “L” values, than those having DMG flour, with chroma and hue angle values significantly higher in treatment breads. In general, no differences were observed for the sensory attributes of crumb color, cells uniformity, aroma, firmness, mouthfeel, and off-flavor in breads with up to 15 g/100 g DMG flour, while the overall acceptability scores showed a mixed pattern. The results of this study demonstrated that acceptable quality bread could be made with DMG flour addition at ≤15 g/100 g.     

Pasting and rheological behavior of soy protein-based pudding

Pasting and rheological behavior of pastes made from different commercial soy proteins and starches were investigated for the development of soy protein-based pudding system. Commercial starch Novation^® 2300 and soy protein concentrate Alpha^® 5812 were found to exhibit the most desirable pasting properties. The yield stress values of commercial puddings were in the range of 27.1-59.6 Pa, Consistency index (K) values in the range of 6.57-18.63 (Pa sⁿ) and flow behavior index (n) values in the range of 0.4192-0.6558. The K, and n values for soy protein-based puddings were found to be comparable to those for the commercial puddings. During 2 weeks of refrigeration, both G′ and G″ increased for all the puddings. Neither water separation nor net syneresis were observed for soy protein-based puddings during 2 weeks of storage at 5 °C. Further adjustments of the formulation that was more comparable to the commercial pudding were achieved.