Reconstruction dynamics of recorded holograms in photochromic glass

We have investigated the dynamics of the record-erase process of holograms in photochromic glass using continuum Nd:YVO? laser radiation (λ=532 nm). A bidimensional microgrid pattern was formed and visualized in photochromic glass, and its diffraction efficiency decay versus time (during reconstruction step) gave us information (D, Δn) about the diffusion process inside the material. The recording and reconstruction processes were carried out in an off-axis setup, and the images of the reconstructed object were recorded by a CCD camera. Measurements realized on reconstructed object images using holograms recorded at a different incident power laser have shown a two-stage process involved in silver atom kinetics.     

Computer-generated microcooled reflection holograms in silicon for material processing with a CO(2) laser

We report on the design, fabrication, and testing of multilevel computer-generated reflection holograms in Si for CO(2) laser material processing for laser intensities of <2 kW/cm(2). The holograms are designed with an iterative method based on scalar diffraction theory. In this case the reconstructed intensity distribution is independent of the incident high-power laser mode. For achieving high diffraction efficiencies, multilevel staircase surface topologies are fabricated by multimask and reactive ion-etching technology on the front side of a polished Si wafer. For efficient hologram cooling, a gratinglike structure of microchannels is chemically etched on the back side of the Si wafer. Absorption and deformation measurements have been carried out on both a microcooled flat mirror and a reflection hologram. The maximum deformation amounts to 200 nm and is 10 times smaller than comparable conventional uncoated Cu mirrors. A diffraction efficiency of 88% is achieved with an eight-level reflection hologram and a 30-mm-diameter CO(2) laser beam with a power of 5 kW.     

Optimally tuned spatial light modulators for digital holography

Digital holography and comparative digital holography are applications that require computer-addressable modulators for the optical reconstruction of digital holograms. The quality of the reconstructed holograms depends on the modulator's properties. Therefore a characterization of the modulators is required. We show the result of a modulator characterization and the modulator's influence on the quality of the reconstructed hologram. We then compare qualitatively and quantitatively the optical reconstruction of phase and amplitude holograms by considering their level of detail and their diffraction efficiency.     

Optical Hough-transform processor with a two-dimensional array of computer-generated holograms

An optical implementation of the Hough transform that uses a two-dimensional array of computergenerated holograms based on a direct-binary-search algorithm is investigated. A Hough-transform filter consisting of 16 × 16 Fourier-transform direct-binary-search computer-generated holograms is examined. A novel matrix format, which uses the parameter domain in the Hough transform instead of a conventional orthogonal coordinate system, enables highly flexible fabrication of a Hough-transform filter by reducing constraints for reconstructed sample points of a computer-generated hologram. A completed Hough-transform filter has excellent performance both in the quality of the reconstructed image and in diffraction efficiency.     

Coupled-wave analysis of vector holograms: effects of modulation depth of anisotropic phase retardation

The diffraction properties of thick vector holograms were analyzed with the use of a simple coupled-wave theory. Two eigenpolarizations in the holograms were determined based on the dielectric perturbation, and diffraction efficiencies for the polarizations were calculated by applying the Kogelnik method. The results were compared with those simulated by the finite-difference time-domain method. As a result, it was demonstrated that the diffraction efficiencies calculated by the two methods are in good agreement for any incident polarization when the modulation depth of the anisotropic phase retardation is substantially smaller than the mean retardation. In addition, we confirmed that coupled-wave analysis provides reasonable accuracy for relatively large modulation in the case of Bragg incidence with eigenpolarization.     

Digital Double-pulsed Holographic Interferometry for Vibration Analysis

Abstract

In this paper we describe a digital double-pulsed holographic system. Two separate holograms of an object under test are recorded within a few microseconds using a charge-coupled device camera and stored in a frame grabber. The holograms are digitally reconstructed using a computer, by simulation of the Fresnel diffraction of the hologram illuminated by the reference wave. The phases of the two reconstructed wave fields are calculated from the complex amplitude and the deformation is obtained from the phase difference. Experimental results are presented.     

Color holography using the angular selectivity of volume recording media

A display hologram of an object can be recorded and reconstructed in three primary colors if the angular selectivity of volume recording media is exploited. Three holograms are recorded in the same medium, each at a different primary color. These three holograms are reconstructed by simultaneous illumination of the hologram with the original reference beams. By proper choice of the angles that the reference beams make to the hologram, it is possible to suppress strongly cross talk between the different reconstructions (e.g., the red object reconstruction in green light). The technique exhibits high resolution, high diffraction efficiency, and vivid colors. Through the addition of three holographically recorded volume gratings it is possible to reconstruct the hologram with a beam of white light. The saturation and brightness of each primary color in the reconstruction can be adjusted by selection of an appropriate thickness for the corresponding grating.     

Storage capacity of holo-interferograms

The practical storage capacity of a holographic medium can be found by finely comparing reconstructions from independent holograms of an information-dense object wave. With the help of two orthogonally polarized reference waves, a pair of volume holograms is recorded simultaneously at imprint densities as high as 4.1 x 10(10) bits/cm3. As a consequence of polarization, the holograms are not mutually coherent, and the twin encodings of the object wave can be reconstructed separately. These are brought into fine registration interferometrically and then scanned by a CCD camera. Experiments on glass-mounted Agfa 8E56, a fine-grained silver halide emulsion designed for holography, are reported. When the object wave was moderately dense in information, grain noise was the main cause of the reconstruction errors. Emulsional plasticity was the more significant factor both when the object wave was optically sparse and when it was extremely dense. Plasticity noise limited the information that could be retrieved to 2.7 x 10(10) bits/cm3, which is 2 orders of magnitude below the capacity suggested by the emulsion's bandwidth and grain-noise figures alone.     

单次相移数字全息中相移值的提取

为了消除相移误差对数字全息中再现像的像质的影响,本文时单次相移数字全息进行了研究.基于相位统计特性,提出了一种有效消除相移误差的新方法,该方法能够对任意未知相移量进行提取,并利用数字全息图所有抽样点的强度偏差之和作为评价标准,通过逐步改变计算得到的初始相移值来寻找正确的实际相移角.计算机模拟得到了很好的再现结果,证明了该方法的可行性和有效性.     

Hybrid carbon nanotube and dye-doped liquid crystal material for holographic imaging

Without the application of AC or DC electric fields, we recorded permanent holographic images in a hybrid material based on the nematic liquid crystal E7, doped with 0.6% Methyl Red (MR) and 0.002% single-wall carbon nanotubes (CNTs). The images were recorded using a 488-nm laser and reconstructed using 488, 532 and 633-nm probe beams. Multi-order diffraction patterns were observed, during image storage and reconstruction, for thin films having thicknesses of 15 μm. The quality and diffraction efficiency were higher for the hybrid cells than for cells doped only with MR. Average first-order diffraction efficiencies of 7.1 and 3.7% were found for the hybrid and MR-only doped cells, respectively. The primary objective of this study was to utilize the molecular properties of MR and CNTs to produce a hybrid material with improved holographic properties. Dynamics of image formation and a proposed CNT-enhancement mechanism are presented. The holograms are robust and have remained stable for over 2 years.     

Study on holographic characteristics of a novel single dye-sensitised photopolymer using blue and green lights

A novel Fuchsin Basic-sensitised photopolymer was prepared and studied as a holographic recording material using He–Cd and Nd:YAG lasers. The results indicate that the material shows attractive recording characteristics, which include diffraction efficiency, sensitivity, refractive index modulation, volume shrinkage, etc. Various photochemistry parameters were obtained by using Levenberg–Marquardt's algorithms to fit the photobleaching model. The storage life of photopolymer film was studied, and holograms were successfully recorded and reconstructed in high fidelity and contrast.     

Light-induced diffraction in thermally reduced congruent and near-stoichiometric Er:LiNbO3 crystals

A polarization-isotropic two-colour light-induced diffraction (LID) phenomenon from thermally reduced congruent and near-stoichiometric Er:LiNbO₃ crystals was observed when these crystals were exposed to superposed 632.8?nm probe and 488?nm pump beams. The LID is characterized by expansion of the probe beam spot and the appearance of alternate bright and dark diffraction rings at higher pump light intensities. This phenomenon is absent not only in all other Er-doped crystals which either were as grown or had experienced other post-growth treatments such as vapour transport equilibration (VTE), oxidation and strong annealing but also in a pure VTE-treated crystal even though the crystal was subjected to the same reduction procedure. The LID characteristics of five reduced crystals, which have different Li-to-Nb ratios and different doping levels of Er³⁺, were studied in detail by changing the light intensity, polarization state and wave vector direction of both the pump and the probe beams. The origin of the LID was investigated from the viewpoints of the red fluorescence of Er³⁺ excited by a 488?nm pump beam, light-induced scattering and light-induced thermal nonlinearity. The results have shown that the thermal nonlinearity mechanism is preferred as it can reasonably explain almost all the observed experimental phenomena.     

Spatial filtering for zero-order and twin-image elimination in digital off-axis holography

Off-axis holograms recorded with a CCD camera are numerically reconstructed with a calculation of scalar diffraction in the Fresnel approximation. We show that the zero order of diffraction and the twin image can be digitally eliminated by means of filtering their associated spatial frequencies in the computed Fourier transform of the hologram. We show that this operation enhances the contrast of the reconstructed images and reduces the noise produced by parasitic reflections reaching the hologram plane with an incidence angle other than that of the object wave.     

Suppression of undesired diffraction orders of binary phase holograms

A method to remove undesired diffraction orders of computer-generated binary phase holograms is demonstrated. Normally, the reconstruction of binary Fourier holograms, made from just two phase levels, results in an undesired inverted image from the minus first diffraction order, which is superposed with the desired one. This can be avoided by reconstructing the hologram with a diffuse light field with a pseudorandom, but known, phase distribution, which is taken into account for the hologram computation. As a consequence, only the desired image is reconstructed, whereas all residual light is dispersed, propagating as a diffuse background wave. The method may be advantageous to employ ferroelectric spatial light modulators as holographic display devices, which can display only binary phase holograms, but which have the advantage of fast switching rates.     

Orthogonal polarization simultaneous readout for volume holograms with hybrid angle and polarization multiplexing in LiNbO(3)

The orthogonal polarization simultaneous readout technique in a hybrid-multiplexed memory using angular multiplexing and polarization multiplexing is presented. Twenty holograms were hybrid multiplexed in a single LiNbO(3) crystal with ten angular positions for angular multiplexing. In each angular position of the holographic memory, two images with orthogonal polarization are multiplexed in the same spatial location inside the LiNbO(3) via polarization multiplexing. These two orthogonally polarized images can be reconstructed simultaneously with a linear polarization reading beam, but they can be separated with a polarization beam splitter, and accordingly each can be viewed independently. The exposure schedule for holographic storage using the proposed hybrid-multiplexing technique is derived.     

Multi-plane imaging for arbitrary reconstruction positions in digital holography

A novel method for multi-plane imaging in digital holography is proposed: holograms of objects located at various places are recorded and then reconstructed simultaneously through one-step Fresnel diffraction using the quadratic distorted phase factor (QDPF). The theory of one-step Fresnel diffraction with the QDPF is deduced and experimental results support the theoretical investigation.     

Size measurement of bubbles in a cavitation tunnel by digital in-line holography

Digital in-line holography (DIH) with a divergent beam is used to measure size and concentration of cavitation bubbles (6-100 μm) in hydrodynamic facilities. A sampling probe is directly inserted in the cavitation tunnel, and the holograms of the bubbles are recorded through a transparent test section specially designed for DIH measurements. The recording beam coming from a fiber-coupled laser diode illuminates the sample volume, and holograms are recorded by a CMOS camera. From each hologram, the sampling volume can be reconstructed slice by slice by applying a wavelet-based reconstruction method. Because of the geometry of the recording beam, a magnification ratio must be introduced for recovering the 3D location and size of each bubble. The method used for processing holograms recorded in such a configuration is presented. Then, statistical results obtained from 5000 holograms recorded under different pressures in the cavitation tunnel are compared and discussed.     

Holographic image storage in eu(3+)-doped alkali aluminosilicate glasses

We demonstrate that holographic information can be stored in Eu(3+)-doped alkali aluminosilicate glasses. The holograms were developed by a two-beam mixing configuration with a write-beam wavelength (465.8 nm) corresponding to the (7)F(0) ? (5)D(0) transition of the Eu(3+) ions. The images were reconstructed either with the wavelength used to record them or with wavelengths below this transition (543.5 and 632.8 nm). We stored clear holographic images using a total writing power of 5 mW and an exposure time of 20 s. In addition, clear holograms were recorded with an exposure time of 200 ms when 100 mW of the writing power was used. The exposure time and the writing power required to obtain clear holographic images are dependent on the Eu(3+) concentration.     

Polarization-selective computer-generated holograms: design, fabrication, and applications

We constructed polarization-selective computer-generated holograms that apply an independent phase profile during readout by horizontal and vertical light polarizations. These elements are composed of two surface-relief-etched birefringent substrates joined face to face. We describe the design methodology for arbitrary birefringent substrate and gap materials. We show how these holograms are fabricated with standard microelectronics technology and discuss the effects of etching and alignment errors on performance. We demonstrated a diffraction efficiency of 60% with a polarization contrast ratio of >100:1 using a multilevel phase hologram made from two birefringent lithium niobate substrates. We also showed that a single-layer SiO(2) thin-film antireflection coating on all surfaces can reduce reflections from the high-index substrates without significant effect on hologram performance. We also consider some possible applications of this technology and demonstrate experimentally a dual focal-length lens and a self-interconnecting binary 2 × 2 polarization switch.     

Mirror hologram recording with a phase-change medium

We propose mirror hologram recording with a phase-change material, which has a large refractive-index difference between its amorphous and crystalline states. It offers excellent diffraction efficiency and is erasable and nonvolatile. We designed an optimum multilayer structure for high diffraction efficiency by simulating the effect of each film thickness on diffraction efficiency. Experiments with a germanium tellurium alloy as the phase-change material show a high diffraction efficiency close to the calculated value. This medium can also be used for directly drawing computer-generated holograms. Lee-type computer-generated holograms were drawn on this medium with optical-disk technology.