Dynamic behavior of a crack in a functionally graded piezoelectric strip bonded to two dissimilar half piezoelectric material planes

Summary. The dynamic behavior of a crack in a functionally graded piezoelectric material (FGPM) strip bonded to two half dissimilar piezoelectric material planes subjected to combined harmonic anti-plane shear wave and in-plane electrical loading was studied under the limited permeable and permeable electric boundary conditions. It was assumed that the elastic stiffness, piezoelectric constant and dielectric permittivity of the functionally graded piezoelectric layer vary continuously along the thickness of the strip. By using the Fourier transform, the problem can be solved with a set of dual integral equations in which the unknown variables are the jumps of the displacements and the electric potentials across the crack surfaces. In solving the dual integral equations, the jumps of the displacements and the electric potentials across the crack surfaces were expanded in a series of Jacobi polynomials. Numerical results illustrate the effects of the gradient parameter of FGPM, electric loading, wave number, thickness of FGPM strip and electric boundary conditions on the dynamic stress intensity factors (SIFs).     

Dugdale plastic zone of a penny-shaped crack in a piezoelectric material under axisymmetric loading

The Dugdale plastic zone ahead of a penny-shaped crack in a piezoelectric material, subjected to electric and axisymmetric mechanical loadings, is evaluated analytically. Hankel transform is employed to reduce the mixed boundary-value problem of the penny-shaped crack to dual integral equations, which are solved exactly under the assumption of electrically permeable crack face conditions. A closed-form solution to the mixed boundary-value problem is obtained to predict the relationship between the length of the plastic zone and the applied loading. The stress distribution in and outside of the yield zone has been derived analytically, and the crack opening displacement has been investigated. The electric displacement has a constant value in the strip yield zone. The current Dugdale crack model leads to non-singular stress and electric fields near the crack front, and it is observed that the material properties affect the crack opening displacement.     

Non-local theory solution of a mode-I crack in a piezoelectric/piezomagnetic composite material plane

The non-local theory solution of a mode-I permeable crack in a piezoelectric/piezomagnetic composite material plane was given by using the generalized Almansi’s theorem and the Schmidt method in this paper. The problem was formulated through Fourier transform into two pairs of dual integral equations, in which the unknown variables are the displacement jumps across the crack surfaces. To solve the dual integral equations, the displacement jumps across the crack surfaces were directly expanded as a series of Jacobi polynomials. Numerical examples were provided to show the effects of the crack length and the lattice parameter on the stress field, the electric displacement field and the magnetic flux field near the crack tips. Unlike the classical elasticity solutions, it is found that no stress, electric displacement and magnetic flux singularities are present at the crack tips in piezoelectric/piezomagnetic composite materials. The non-local elastic solution yields a finite hoop stress at the crack tip, thus allowing us to use the maximum stress as a fracture criterion.     

Transient analysis of a piezoelectric strip with a permeable crack under anti-plane impact loads

The problem of a through permeable crack situated in the mid-plane of a piezoelectric strip is considered under anti-plane impact loads for two cases. The first is that the strip boundaries are free of stresses and of electric displacements, and the second is that the strip boundaries are clamped rigid electrodes. The method adopted is to reduce the mixed initial-boundary value problem, by using integral transform techniques, to dual integral equations, which are further transformed into a Fredholm integral equation of the second kind by introducing an auxiliary function. The dynamic stress intensity factor and energy release rate in the Laplace transform domain are obtained in explicit form in terms of the auxiliary function. Some numerical results for the dynamic stress intensity factor are presented graphically in the physical space by using numerical techniques for solving the resulting Fredholm integral equation and inverting Laplace transform.     

压电-压磁板条中反平面裂纹的电-磁-弹性分析

基于线性电磁弹性理论,获得了压电-压磁板条中反平面裂纹尖端附近的奇异应力、电场和磁场。假设裂纹位于和板条边界平行的中心位置,并且裂纹是电磁渗透型的。利用Fourier变换,将裂纹面的混合边值问题化为对偶积分方程,即而归结为第二类Fredholm积分方程。通过渐近分析,得到了裂纹尖端附近应力、应变、电位移、电场、磁场和磁感的封闭表达式。结果表明,对于电磁渗透裂纹,电场强度因子和磁场强度因子总为0;板条的宽度对应力强度因子有显著的影响;能量释放率总为正值。     

Transient response of a functionally graded piezoelectric strip with a penny-shaped crack under electric time-dependent loading

Summary The dynamic fracture problem for a functionally graded piezoelectric material (FGPM) strip containing a penny-shaped crack parallel to the free boundaries is considered in this study. It is assumed that the electroelastic properties of the strip vary continuously along the thickness direction of the strip, and that the strip is under time-dependent electric load. Integral transform techniques and dislocation density functions are employed to reduce the problem to the solutions of a system of singular integral equations. The stress and electric displacement intensity factors versus time are presented for various values of dimensionless parameters representing the crack size, the crack location and the material nonhomogeneity.     

加层压电条界面裂纹的稳态扩展

研究当压电条同时与两个不同材料的弹性条粘接在一起,在反平面机械载荷及面内电载荷联合作用下,长度不变的有限Griffith 界面裂纹沿加层压电条界面以常速稳态扩展时裂尖的动态断裂问题.应用Fourier积分变换将问题化为以第二类Fredholm积分方程表示的对偶积分方程,导出了相应的动应力强度因子表达式.给出了动应力强度因子与裂纹传播速度、裂纹长度、压电条及弹性条厚度、电荷载大小及方向的关系曲线.研究结果对结构设计及结构失效的预防具有理论和应用价值.     

Fracture of a finite piezoelectric layer with a penny-shaped crack

This paper studies a penny-shaped crack in a finite thickness piezoelectric material layer. The piezoelectric medium is subjected to a thermal flux on its top and bottom surfaces. Both thermally insulated crack and heated crack are considered. Numerical solution for the finite layer thickness is obtained through the solution of a pair of dual integral equations. The result reduces to the closed form solution when the thickness of the piezoelectric layer becomes infinite. Exact expressions for the stress and electric displacement at the crack border are given as a function of the stress intensity factor, which is determined by the applied thermal flux. This paper is useful for the reliability design of piezoelectric materials in thermal environments.     

Two parallel penny-shaped or annular cracks in a functionally graded piezoelectric strip under electric loading

In this paper, the mixed-mode fracture problem of a functionally graded piezoelectric material strip with two penny-shaped or annular cracks is considered. It is assumed that the electroelastic properties of the strip vary continuously along the thickness of the strip, and that the strip is under electric loading. The problem is formulated in terms of a system of singular integral equations, which are solved numerically. Numerical calculations are carried out, and the stress and electric displacement intensity factors are presented for various values of dimensionless parameters representing the crack size, the crack location, and the material nonhomogeneity.     

Dynamic stress intensity factors of two 3D rectangular permeable cracks in a transversely isotropic piezoelectric material under a time‐harmonic elastic P‐wave

The dynamic behavior of two 3D rectangular permeable cracks in a transversely isotropic piezoelectric material is investigated under an incident harmonic stress wave by using the generalized Almansi's theorem and the Schmidt method. The problem is formulated through double Fourier transform into three pairs of dual integral equations with the displacement jumps across the crack surfaces as the unknown variables. To solve the dual integral equations, the displacement jumps across the crack surfaces are directly expanded as a series of Jacobi polynomials. Finally, the relations among the dynamic stress field and the dynamic electric displacement filed near the crack edges are obtained, and the effects of the shape of the rectangular crack, the characteristics of the harmonic wave, and the distance between two rectangular cracks on the stress and the electric intensity factors in a piezoelectric composite material are analyzed. Copyright © 2015 John Wiley & Sons, Ltd.     

The scattering of harmonic elastic anti-plane shear waves by a Griffith crack in a piezoelectric material plane by using the non-local theory

In this paper, the dynamic behavior of a Griffith crack in a piezoelectric material plane under anti-plane shear waves is investigated by using the non-local theory for impermeable crack face conditions. For overcoming the mathematical difficulties, a one-dimensional non-local kernel is used instead of a two-dimensional one for the anti-plane dynamic problem to obtain the stress and the electric displacement near the crack tips. By using the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations. These equations are solved using the Schmidt method. Contrary to the classical elasticity solution, it is found that no stress and electric displacement singularity is present near the crack tip. The non-local dynamic elastic solutions yield a finite hoop stress near the crack tip, thus allowing for a fracture criterion based on the maximum dynamic stress hypothesis. The finite hoop stress at the crack tip depends on the crack length, the circular frequency of incident wave and the lattice parameter. For comparison results between the non-local theory and the local theory for this problem, the same problem in the piezoelectric materials is also solved by using local theory.     

Penny shaped crack in a three-dimensional piezoelectric strip under in-plane normal loadings

Summary The singular mechanical and electric fields in a three-dimensional piezoelectric ceramic strip containing a penny shaped crack under in-plane normal mechanical and electrical loadings based on the continuous electric boundary conditions on the crack surface are considered here. The potential theory and Hankel transforms are used to obtain a system of dual integral equations, which is then expressed as a Fredholm integral equation. All sorts of field intensity factors of Mode I are given, and numerical values for PZT-6B piezoelectric ceramic are graphically shown.     

Transient response of a center crack in a functionally graded piezoelectric strip under electromechanical impact

The dynamic fracture problem for a functionally graded piezoelectric strip containing a center crack parallel to the free boundaries is considered in this study. It is assumed that the electroelastic properties of the medium vary continuously in the thickness direction, and that the strip is under in-plane mechanical and electric impact loadings. Integral transform techniques and dislocation density functions are employed to reduce the problem to the solutions of a system of singular integral equations. The dynamic stress and electric displacement intensity factors versus time are presented for various values of dimensionless parameters representing the crack size, the material nonhomogeneity and the loading combination.     

A Moving Mode-III Crack in a Functionally Graded Piezoelectric Strip

In this paper, the problem of a functionally graded piezoelectric strip with a constant-velocity Yoffe-type moving crack is considered. By using the Fourier transforms, the problem is first reduced to dual integral equations and then into Fredholm integral equations of the second kind. The electroelastic field near the crack tip is obtained for electrical impermeable boundary conditions and electrical permeable boundary conditions, respectively. The results obtained show that the gradient of the material properties can increase or decrease the magnitudes of the stress intensity factors, and the velocity can disturb the stress distribution near the crack tip.     

Impact response of a finite crack in an orthotropic strip

Summary The elastodynamic response of a finite crack in an infinite orthotropic strip under normal impact is investigated in this study. The crack is situated symmetrically and oriented in a direction normal to the edges of the strip. Laplace and Hankel transforms are used to reduce the transient problem to the solution of a pair of dual integral equations in the Laplace transform plane. The solution to the dual integral equations is then expressed in terms of a Fredholm integral equation of the second kind. Numerical values on the dynamic stress intensity factor for some fiber-reinforced composite materials are obtained and the results are graphed to display the influence of the material orthotropy.     

Thermoelectroelastic response of a functionally graded piezoelectric strip with two parallel axisymmetric cracks

A mixed-mode thermoelectroelastic fracture problem of a functionally graded piezoelectric material strip containing two parallel axisymmetric cracks, such as penny-shaped or annular cracks, is considered in this study. It is assumed that the thermoelectroelastic properties of the strip vary continuously along the thickness of the strip and that the strip is under thermal loading. The crack faces are supposed to be insulated thermally and electrically. Using integral transform techniques, the problem is reduced to that of solving two systems of singular integral equations. Systematic numerical calculations are carried out, and the variations of the stress and electric displacement intensity factors are plotted for various values of dimensionless parameters representing the crack size, the crack location and the material non-homogeneity.     

Eccentric crack in a rectangular piezoelectric medium under electromechanical loadings

Summary The solutions of an eccentric crack problem in a rectangular piezoelectric ceramic medium under combined anti-plane shear and in-plane electrical loadings are obtained by the continuous electric crack face condition. Fourier transforms and Fourier series are used to reduce the problem to two pairs of dual integral equations, which are then expressed by a Fredholm integral equation of the second kind. Numerical values of the stress intensity factor and the energy release rate are obtained to show the influence of the electric field.     

Impact response of a finite crack in an orthotropic piezoelectric ceramic

Summary The transient dynamic stress intensity factor and dynamic energy release rate were determined for a cracked piezoelectric ceramic under normal impact in this study. A plane step pulse strikes the crack and stress wave diffraction takes place. Laplace and Fourier transforms are employed to reduce the transient problem to the solution of a pair of dual integral equations in the Laplace transform plane. The solution of the dual integral equations is then expressed in terms of a Fredholm integral equation of the second kind. A numerical Laplace inversion technique is used to compute the values of the dynamic stress intensity factor and the dynamic energy release rate for some piezoelectric ceramics, and the results are graphed to display the electroelastic interactions.     

Boundary integral equation method for conductive cracks in two and three-dimensional transversely isotropic piezoelectric media

Using the fundamental solutions and the Somigliana identity of piezoelectric medium, the boundary integral equations are obtained for a conductive planar crack of arbitrary shape in three-dimensional transversely isotropic piezoelectric medium. The singular behaviors near the crack edge are studied by boundary integral equation approach, and the intensity factors are derived in terms of the displacement discontinuity and the electric displacement boundary value sum near the crack edge on crack faces. The boundary integral equations for two dimensional crack problems are deduced as a special case of infinite strip planar crack. Based on the analogy of the obtained boundary integral equations and those for cracks in conventional isotropic elastic material and for contact problem of half-space under the action of a rigid punch, an analysis method is proposed. As an example, the solution to conductive Griffith crack is derived.     

Investigation of anti-plane shear behavior of a Griffith crack in a piezoelectric material by using the non-local theory

In this paper, the behavior of a Griffith crack in a piezoelectric material under anti-plane shear loading is investigated by using the non-local theory for impermeable crack surface conditions. By using the Fourier transform, the problem can be solved with two pairs of dual integral equations. These equations are solved using Schmidt method. Numerical examples are provided. Contrary to the previous results, it is found that no stress and electric displacement singularity is present at the crack tip.