共查询到20条相似文献,搜索用时 78 毫秒
1.
通过改进氯乙烯转化器结构、重新选材、控制混合气及触媒含水量、维护转化器热水系统,并合理调节单台转化器气体流量等措施,提高了转化器的使用寿命,降低了触媒消耗,提高了氯乙烯单体产量,全年可多获效益270.19万元。 相似文献
2.
氯乙转化器是聚氯乙烯生产过程中的关键设备之一。本文总结分析了转化器蚀漏的原因,介绍了转化器的结构特点及技术参数,详细地提出了解决氯乙烯转化器蚀漏的具体方法和对策。 相似文献
3.
4.
5.
硫酸装置不锈钢转化器国内外近况 总被引:3,自引:1,他引:2
孙正东 《硫磷设计与粉体工程》2001,(4):1-5
不锈钢在高温下具有很强的抗氧化性能和较高的机械强度,用不锈钢制作的转化器克服了传统碳钢转化器的诸多缺点和隐患,介绍了国外诸工程公司开发的不锈钢转化器的特点及其在硫酸工业中的应用,以及近几年来我国对不锈钢转化器的应用和开发情况。 相似文献
6.
介绍了大蓄热量转化器的设计及应用。转化器内衬和球拱均采用耐火砖砌筑,以提高转化器的蓄热能力。生产实践表明,大蓄热量转化器对二氧化硫含量低及二氧化硫含量波动大的烟气有很好的适应性,保证了 二氧化硫含量烟气两转两吸实现自热平衡。 相似文献
7.
介绍了铜冶炼厂硫酸转化器烧毁倒塌事故,并对事故进行了剖析。焦炭不完全燃烧产生的大量一氧化碳进入转化器,在转化器中燃烧致使温度升高,引起大量沉积在转化器中的焦炭燃烧,导致事故发生。对于铜冶炼烟气制酸系统,在控制烟气一氧化碳含量的同时,选用合适的净化工艺,以保证系统安全、稳定运行。 相似文献
8.
本文建立了二氧化硫多段间接换热催化转化器的数学模型,应用变分法求解各段最优入口温度,对转化器的设计参数系统进行灵敏度分析,由此定量估计转化器催化床高度的设计裕量。 相似文献
9.
江浩 《硫磷设计与粉体工程》2006,(2):25-27
转化率是硫磺制酸装置生产的主要控制参数,是衡量装置生产的经济性及先进性的重要指标之一。介绍了200kt/a硫磺制酸装置转化器的操作情况,转化器各段的转化率、总转化率及分段压力降,通过分析检测结果,阐述了影响转化器转化率的主要因素,并提出了提高转化率的措施。 相似文献
10.
分析了一起氯乙烯转化器泄漏事件,认为其根本原因是转化器列管水侧发生的电化学腐蚀,从减少热水中的氢和氧含量,进而抑制电化学腐蚀方面提出了有效的防范措施。 相似文献
11.
通过利用变频器调节保证恒压供应循环水的实例,介绍了变频器的工作原理和方案设计。对变频器使用过程中存在的问题,提出了解决方法。 相似文献
12.
13.
固相缩聚生产中变频器节能的原理和应用 总被引:1,自引:0,他引:1
介绍了变频器的原理和结构。说明了变频器的节能原理。对变频器应用于固相缩聚系统风机设备的负荷特性进行了分析。以固相缩聚生产中预结晶系统为例,说明变频器的节能应用。指出采用变频拖动的方式替代原来的软启动方式,是一种理想的调速控制方式。提高了设备效率,节能降耗,操作方便,经济效益十分明显。 相似文献
14.
15.
16.
A. P. Nagornyi I. D. Buga A. B. Kovura A. I. Kravchenko S. A. Nagornyi 《Refractories and Industrial Ceramics》1997,38(11-12):475-478
The causes of the impairment in the durability of the converter lining at the Azovstal’Integrated Iron and Steel Works were identified. In April–June 1997, commercial-scale tests were carried out on periclase–carbon refractories of grades LIUBX-15 and LIUBXZ-710 used in the working lining of a converter. The lining withstood 1025 heats. From the beginning of 1997, the average durability of the converter lining fabricated from commercial unburned periclase—limestone refractories of grade PIBS-50 was 475 heats. The improvement in durability was due to the use of periclase—carbon refractories containing 10 to 20% carbon. The nominal service life of grade LIUBX-15 and LIUBXZ-710 periclase—carbon refractories under the conditions obtaining at the converter plant of the Azovstal' Integrated Iron and Steel Works is 1200 to 1300 heats. With the documented durability of 1025 heats, the use of periclase—carbon refractories in the working lining of the converter thus cuts the cost of the lining by as much as US $0.3 per metric ton of converter steel. 相似文献
17.
采用新型高效节能塔板对尿素合成塔传统塔板进行更新改造,改善塔内物料的传质传热过程,并利用塔底部原有空间增加塔板,提高了尿素合成转化率,降低了尿素生产的氨耗和蒸汽消耗。 相似文献
18.
19.
介绍变频器在涤纶短纤卷绕装置中的应用及其运行现状,分析引起卷绕停车的主要原因为生头跳闸,绕辊跳闸,变频器故障跳闸,并提出了相应的解决措施。 相似文献
20.
A mathematical model is proposed to simulate the starch converter. The converter was hydrodynamically divided into six zones and material and energy balances were established in each zone. Due to the fact that the converter is a laminar flow reactor, it was necessary to apply the equation oriented simulation approach to simulate the converter. Therefore, four partial differential equations were solved together by finite difference in each section. Thermophysical properties of the corresponding fluid were calculated by using various correlations and data from the literature. In order to predict accurate concentrations of glucose, the kinetics was determined with the aid of the data in the literature. A set of actual plant data from the industrial converter is used to validate the proposed model. The agreement between the model prediction and the experimental data is quite satisfactory and the model could be used to predict the performance of industrial converters at a wide range of operating conditions. 相似文献