Evaluation of peripheral dual energy X-ray absorptiometry: comparison with single photon absorptiometry of the forearm and dual energy X-ray absorptiometry of the spine or femur

An evaluation of the Osteoscan peripheral dual energy X-ray absorptiometer (pDXA) was carried out to compare its performance with those of a single photon absorptiometer (SPA) (Molsgaard Medical ND1100A) and a dual energy X-ray absorptiometer (DXA) (Lunar DPX alpha) of the spine or femur. In 57 patients, correlation between bone mineral content (BMC) of the forearm at the ultradistal (UD) site by pDXA and by SPA was high (r = 0.94). Comparisons were also made with spine and femur bone mineral density (BMD) DXA measurements. The correlation of z-scores of UD BMD with z-scores for lumbar spine L2-L4 was r = 0.63 (n = 73 patients); and with z-scores for neck of femur was r = 0.72 (n = 33). With the Osteoscan the measurement error coefficient of variation in vivo was 2.6% for BMC, 1.8% for BMD at the ultradistal site; 2.1% for BMC and 1.9% for BMD at the mid-distal site. Repeat measurements were made of the European forearm phantom; precision for SPA was slightly better than either pDXA or Lunar DXA. The Osteoscan has the potential for a rapid throughput of patients and is not affected by calcification and degenerative changes that can corrupt DXA measurements on the anteroposterior spine in older women.     

A Monte Carlo model for bone mineral measurement using dual energy X-ray absorptiometry

We discuss the surgical approach used for and outcome in 11 infants (< or =3 years) who were treated at our institution for ependymomas arising in the cerebellar-pontine (C-P) angle. The median age of the group was 19 months (range: 6-26 months). Of these 11 patients, the initial surgery for 8 was performed at our center and achieved a gross total resection (GTR) in 4 patients and a subtotal resection (STR) in the remaining 4. The 3 patients who had tumor debulking performed elsewhere were subsequently referred to our institution and had definitive surgery after receiving 3-4 courses of chemotherapy; one of these children had a GTR, whereas the remaining 2 had an STR. During the immediate postoperative period, 9 patients had cranial nerve deficits that necessitated placement of a tracheostomy and a gastrostomy feeding tube; these were discontinued in 6 of the 9 patients as the deficits resolved. The majority of the permanent cranial nerve deficits involved the sixth and seventh cranial nerves. Of the 11 patients, 4 have died (progressive disease, n = 1; accidental death, n = 2; withdrawal of life support, n = 1); the remaining 7 patients are alive, with a median follow-up of 37 months (range: 20-73 months). Aggressive surgical resection for tumors arising in the C-P region is associated with postoperative deficits, which resolve over time with appropriate supportive care. This approach may increase the number of children in whom GTR is achieved, thereby potentially increasing the cure rate for these patients.     

Impact of hydration status on body composition as measured by dual energy X-ray absorptiometry in normal volunteers and patients on haemodialysis

To evaluate the influence of hydration status on the estimation of body composition using dual-energy X-ray absorptiometry (DXA), six normal volunteers and seven patients on maintenance haemodialysis were investigated using two different DXA machines (Lunar DPX, Hologic QDR 1000/W). Normal volunteers were studied (Hologic QDR 1000/W) before and 1 h after ingestion of breakfast, lunch and dinner (drinking various amounts of liquids at each meal, 0.5-2.4 kg). Whereas bone mineral content and body fat mass did not change, lean body mass of the trunk increased as a consequence of the meals. Conversely in patients on haemodialysis (Lunar DPX), lean body mass decreased in all segments of the body as a consequence of removal of 0.9-4.4 kg of salt-containing fluid by haemodialysis (trunk 61%, legs 30%, arms 5.5% and rest of the body 3.5%), whereas bone mineral content and body fat mass remained unchanged. However, this finding(s) did not hold true in one particular patient with bilateral hip prostheses. Measurement of body composition in eight normal volunteers on the same day with both machines showed similar results for lean and fat mass, whereas bone mineral content was found to be 17% higher using the Lunar DPX. In summary, in centres where both machines are available, follow-up of one individual patient should always be performed using the same equipment. In addition, hydration status and food intake must be taken into account when repetitive measurements of lean body mass are performed in the same patient.     

Reference values of body composition obtained by dual energy X-ray absorptiometry in preterm and term neonates

We have recently reported the cDNA cloning of rat spermatidal protein TP2 and its expression in Escherichia coli using pTrc 99A as the expression vector. However, the expression level was very low. We have now improved the expression of TP2 over fivefold by (1) optimizing the codons for lysine, arginine, proline, leucine, glycine, valine, threonine, alanine, and tyrosine and (2) by engineering the vector-encoded 5' UTR. The expressed protein was in the soluble phase and could be purified to homogeneity by successive chromatography on Zinc-NTA-agarose affinity matrix and heparin agarose. Serendipitously, we have also observed a concomitant hyperinduction of vector encoded beta-lactamase gene along with TP2 in the E. coli BL21 (DE3) cells.     

Changes in body fat: measurements by neutron activation, densitometry and dual energy X-ray absorptiometry

The measurement of body fat in ten subjects (BMI from 22 to 43 kg/m2), and in particular the changes arising from a ketogenic diet, by the techniques of in vivo neutron activation analysis (NAA), densitometry (using two- and four-compartment models) by under water weighing (UWW) and dual energy X-ray absorptiometry (DXA) was compared. The association between techniques for the fat changes was generally high (r = 0.70 to 0.98) and significant (p < 0.05). Assessment of agreement between DXA and the other techniques revealed discrepancies with significant slope and high association (r = -0.81 and -0.64). Whilst NAA and UWW appeared to measure similar changes, DXA underestimated small changes.     

Measurement of bone mineral density using dual energy X-ray absorptiometry in asthmatic patients receiving prednisolone therapy

Bone mineral density (BMD) of the lumbar spine (L2-L4) was measured using dual-energy X-ray absorptiometry (DEXA), and its relationship to total dose of prednisolone and duration of prednisolone therapy was studied in 57 patients with bronchial asthma. There was a significant negative correlation between BMD and total dose of prednisolone (r = -0.463, p < 0.001) and between BMD and duration of prednisolone treatment (r = -0.30, p < 0.05). The half-yearly percent decrease of BMD measured in 17 asthmatic patients was 0.83% (p < 0.01) after correction for age-associated decline. These findings suggest that the reduction of BMD was related to the total dose of prednisolone and the duration of therapy in asthmatics.     

Comparison of ultrasound and dual energy X-ray absorptiometry measurements in the calcaneus

Ultrasound measurements have been proposed as a means of providing structural information on bone but have also been shown to correlate with density. High correlation coefficients have been obtained in vitro, but are lower for in vivo work. The aim of this study was to investigate the relationship of broadband ultrasound attenuation (BUA), speed of sound (SOS) and stiffness, to bone mineral density (BMD) measured in the calcaneus at a closely matched region of interest (ROI). Measurements were made in 55 post-menopausal and 20 young, normal women. Calcaneus BMD measurements were made using an ROI (fixed by reference to external axes) to represent the area and location of the ultrasound transducers and an ROI based on anatomical markers, positioned in the posterior part of the calcaneus. BUA was significantly correlated with calcaneus BMD in the fixed ROI (r = 0.77, p < 0.0001) and the anatomical ROI (r = 0.78, p < 0.0001). Correlation of BUA with axial BMD was lower at r = 0.63, p < 0.0001 for the spine (L2-L4) and r = 0.59, p < 0.0001 for the femoral neck. Results for SOS and stiffness were very similar. From the calcaneus dual energy X-ray absorptiometry (DXA) scan images the region representing the ultrasound measurement area was found to contain cortical bone edges in 60% of cases. In 16% of scans a small part (4.5 +/- 4.0%) of the ROI measurement area fell partially outside the heel. However, there was no obvious discrepancy in the ultrasound results in the individual cases where this occurred. The correlation between calcaneus BMD and BUA was improved from r = 0.72 to r = 0.86 when scans with a cortical edge in the measurement ROI were excluded. The values for SOS were similar. In summary, BMD of the calcaneus, when closely matched to the site of ultrasound measurement shows significant correlation with ultrasound measurements. By excluding scans in which the ultrasound measurement appeared to include bone edges, correlations of approximately r = 0.86 were obtained. However, the BMD result still does not explain all of the variance in the ultrasound results.     

Body composition during weight loss in obese patients estimated by dual energy X-ray absorptiometry and by total body potassium

OBJECTIVE: To validate the ability of DXA to measure total body composition before and after weight loss and the composition of the lost body mass. DESIGN: Cross sectional and follow-up study of body composition before and after a weight loss of 10.6 +/- 6.8 kg. SUBJECTS: 31 obese subjects with a mean body weight of 105.2 +/- 15.2 kg at baseline, and a mean body weight of 94.6 +/- 16.5 kg at follow-up. MEASUREMENTS: Body composition was measured by dual X-ray absorptiometry, total body potassium counting, and high precision scales before and after a weight loss. RESULTS: DXA and the scales showed a strong linear relation (r = 1). At baseline, however, DXA underestimated the body weight by a maximum of 3.2 kg because the subjects were too large for the scan table. After weight loss body weight measurements were accurate. Before and after weight loss the linear relations between DXA and TBK for FFM were strong (r = 0.92 and 0.93). Bland and Altman plots showed limits of agreement of +/-9 kg before and after weight loss; DXA underestimated FFM in women and overestimated FFM in men. DXA accounted for 80% of the lost body weight. The composition of the lost body mass did not differ from that estimated by TBK (7.6% FFM and 92.4% FM by TBK; 11% FFM and 89% FM by DXA). CONCLUSION: DXA estimates accurately the body composition and the composition of weight loss in groups of obese subjects. However, the scan table may be too small for patients weighing more than 95 kg.     

Body composition analysis by dual energy X-ray absorptiometry in female diabetics differ between manufacturers

OBJECTIVE: Comparison of body composition results by two dual energy X-ray absorptiometry (DXA) instruments, namely QDR-2000 from Hologic Inc and from Lunar in subpopulations of lean and obese subjects. DESIGN: Cross-sectional study with 85 female diabetics (BMI 18-43 kg/m2) measured with both DXA instruments. RESULTS: The regression lines for fat tissue mass (FTM), FAT% and total body bone mineral content (TBMC), but not lean tissue mass (LTM), were different from the line of identity (P < 0.01). However, the relationships were high (r2 > 0.95), and the corresponding SEE%'s were low (0.8-4.8%), and were independent of BMI. FTM and FAT% measured by the QDR-2000 were 10% higher, and LTM and TBMC 6% lower, than by DPX (P < 0.001). CONCLUSIONS: There were lack of agreements between total body composition results by DPX Lunar, and QDR-2000 Hologic Inc. Individual results on the two systems cannot be directly compared. Standardization of body composition measurements by DXA is strongly needed.     

Comparison of body composition by dual energy X-ray absorptiometry to other estimates of body composition during weight loss in obese patients with rheumatoid arthritis

Body composition was determined by dual energy X-ray absorptiometry (DXA) scanning and classical reference methods (40K, 3H2O, and a combination of these in a four-compartment model) in 19 overweight patients with rheumatoid arthritis who underwent a 12-week weight-reducing regimen. The aim of the study was to investigate whether DXA provides a valid estimate of body composition. The results showed that weight as determined by DXA was highly significantly correlated to weight determined by scales. Furthermore, significant correlations were found in the body components (fat-free mass, fat mass) determined by DXA, 40K, 3H2O and the four-compartment model. Mean values differed slightly but significantly. With respect to changes in body composition, no significant correlations were found between any of the methods, except for the weight loss recorded by DXA and scales, and loss of fat mass (and fat free mass) estimated by 3H2O and the four-compartment model. The sparseness of correlations reflected the small changes in fat-free mass and fat mass (2.6 and 1.7 kg respectively), and the fact that changes were comparable to measurement errors of the various methods. We suggest that DXA scanning is a valid supplement for determination of body composition. Validation of DXA scanning requires new experimental in vitro investigations, which, incidentally, also applies to the classical reference methods.     

Prediction of percent body fat in adult males using dual energy x-ray absorptiometry, skinfolds, and hydrostatic weighing

The purpose of this study was to compare the prediction of percent body fat (%FAT) by dual energy x-ray absorptiometry (DXA), skinfolds (SF), and hydrostatic weighing (HW) in adult males. Subjects were 35 adult male Caucasians (mean +/- SD; age: 39.1 +/- 14.0 yr, height: 180.6 +/- 5.3 cm, weight: 81.0 +/- 11.1 kg). %FAT, determined by HW with residual volume determined via O2 dilution, served as the criterion. DXA %FAT was determined by the Norland XR-26 (XR-26) bone densitometer and by the SF equations of Jackson and Pollock (JP) (1978), and Lohman (LOH) (1981). Criterion referenced validation included analyzing mean (+/- SD) %FAT values using a one-way ANOVA for significance, comparison of mean differences (MD), correlations (r), standard error of estimates (SEE), and total errors (TE). Significant differences were found between means of each method. The r (0.91) and SEE (3.0 %FAT) for DXA compare favorably with the established SF methods of JP and LOH for predicting %FAT; however, DXA demonstrated the largest MD (3.9 %FAT) and TE (5.2 %FAT). Regression analysis yields HW = 0.79* DXA + 0.56. The results do not support earlier research that found no significant difference between HW and DXA %FAT in males. The study suggests the density of the fat-free body (DFFB) is not constant, and that the variation in bone mineral content affects the DFFB, which contributes to the differences between DXA and HW %FAT. We recommend further research to identify inconsistencies between manufacturers of DXA equipment in prediction of %FAT in males.     

Bone lesion in multiple myeloma--bone mineral density measured by dual energy X-ray absorptiometry in multiple myeloma]

The paper discusses some of the factors that affect the onset of osteoporosis, and provides an original model for rehabilitation procedure in this disorder. The type of motor exercises used are indicated, and the sequence in which they are done. There is also a discussion of the significance of the application of physiotherapy equipment. Attention is also drawn in the paper to the possibility of the patient applying rehabilitation procedures independently, under only periodic supervision by the physician.     

Prediction of fatigue screw loosening in anterior spinal fixation using dual energy x-ray absorptiometry

STUDY DESIGN: A biomechanical study was performed to investigate a relation between the bone mineral density of the vertebral body and the number of loading cycles to induce fatigue loosening of an anterior vertebral screw. OBJECTIVES: The objective of this study was to investigate the potential usefulness of dual energy x-ray absorptiometry of measuring bone mineral density of the vertebral body in predicting the fatigue loosening of th anterior vertebral screw. SUMMARY OF BACKGROUND DATA: Loosening of the vertebral body screw is a well know failure in spinal instrumentation, and more commonly observed than pullout failure. The relation between bone mineral density and pullout strength of the screw has been investigated previously, but no studies are available on the fatigue loosening in anterior spinal fixation. METHODS: Bone mineral density was measured using dual energy x-ray absorptiometry and the screw loosening was produce by a cyclic loading in the cephalad-caudal direction. Screw loosening was defined as 1 mm displacement of the screw relative to bone, and the number of loading cycles to induce the screw loosening was obtained and statistically correlated with bone mineral density. RESULTS: There was a positive correlation between the number of loading cycles to induce screw loosening and bone mineral density (R = 0.8, P < 0.01). The average number of loading cycles to induce screw loosening was significantly less for specimens with bone mineral density < 0.45 g/cm2 compared to those with bone mineral density > or = g/cm2. CONCLUSIONS: These findings suggest that bone mineral density may be a good predictor of anterior vertebral screw loosening. Bone mineral density < 0.45 g/cm2 may be critical value of loosening of the anterior vertebral body screw. However, further biomechanical and clinical studies are required before using threshold value clinically.     

Spatial distribution of femoral bone mineral in dual energy X-ray absorptiometry images: a possible technique to improve discrimination between normal and osteoporotic patients

The measurement of bone mineral density (BMD) using dual energy X-ray absorptiometry (DXA) provides an indicator of subsequent risk of hip fracture, but because of the significant overlap of measurements obtained from osteoporotic and control groups its predictive power is limited. The radiographic technique of Singh grading for the assessment of femoral osteoporosis utilizes information about the distribution of trabecular bundles, but the morphological information available in the DXA image has not previously been analysed. In this study of DXA images from 64 individuals (32 controls and 32 classified as osteoporotic) a subjective grading technique analogous to Singh grading is proposed, and quantitative measurements are made of image features corresponding to two of the categories. Discrimination was assessed using receiver operating characteristic (ROC) curves: the best discrimination was by spinal BMD (Az = 0.85 +/- 0.05) a performance equalled by one of the new parameters; the subjective grading method (Az = 0.79 +/- 0.07) performed as well as measurements of BMD in the femur. These results suggest that although the alternative measures do not improve on the discrimination possible using spinal BMD, morphological information from the hip itself may in the future have a place in the assessment of bone quality.     

Radiation dose and in vitro precision in paediatric bone mineral density measurement using dual X-ray absorptiometry

Dual X-ray absorptiometry (DXA) is one of the most widely used techniques for non-invasive assessment of bone integrity. There is a growing demand for measurement of paediatric bone status. In DXA the principal radiation risks to patients are the carcinogenic and genetic effects. Radiation dosimetry is well established for DXA in adults, but there are limited paediatric data available. We report on a study to estimate the effective doses (EDs) received by typical 5- and 10-year-old children using the paediatric scan mode on the Lunar DPX-L bone mineral density scanner. Entrance surface doses (ESDs) and percentage depth doses for the total body and PA spine scan modes were measured using lithium borate thermoluminescent dosemeters (TLDs) located at the surface and distributed at various organ locations in anthropomorphic child phantoms. The EDs were calculated from the percentage depth doses, amount of each organ irradiated and tissue weighting factors. The ESDs were measured to be 6.0 and 0.12 microGy for the posteroanterior (PA) spine and total body, respectively. PA spine EDs were calculated as 0.28 and 0.20 microSv for the 5- and 10-year-old, respectively. Total body EDs were 0.03 and 0.02 microSv for the 5- and 10-year-old children, respectively. These results compare with an adult ED of 0.21 microSv for the PA spine. They are also more than two orders of magnitude lower than reported ESDs and EDs for paediatric chest X-rays. Bone mineral density (BMD) short-term in vitro precision was 0.5% and 1% in the 5- and 10-year-old phantoms, respectively. In conclusion, the Lunar DPX-L in the paediatric mode has a high precision and very low radiation doses, similar to those reported for the adult mode.     

Precision of dual energy x-ray absorptiometry in the upper extremities

Dual energy x-ray absorptiometry (DEXA) has been shown to be a precise method for measuring bone mineral density (BMD) and content (BMC) in lumbar spine and proximal femur, but it has not been widely used in other skeletal sites. The in vivo day-to-day precision of DEXA (Norland XR-26) for seven anatomic sites in the upper extremities was evaluated by twice measuring both the right and left sides in ten subjects. For consistently defined regions-of-interest, the following precision values (coefficient of variation) were obtained for BMD and BMC: 0.8% and 1.0% (proximal humerus); 0.5% and 0.5% (humeral shaft); 0.7% and 0.5% (radial shaft); 1.3% and 1.1% (ulnar shaft); 0.7% and 1.0% (distal radius); 0.7% and 1.2% (distal ulna); 0.4% and 0.6% (hand). The initially observed relative side-to-side differences did not change significantly in the repeated measurements. Our results indicate that DEXA is a precise method for assessment of BMD and BMC also in the upper extremities.     

The relation between osteoporosis of the spine and osteoarthritis of the knee. A study using dual energy X-ray absorptiometry and radiographs

We investigated the relation between osteoporosis of the spine and osteoarthritis of the knee using dual energy X-ray absorptiometry of the lumbar spine to measure bone mineral density and radiographs of the knee in 82 randomly selected females (mean age 77.5 years). Radiographs of the knee were divided into a normal and severe group. The bone mineral density of the severe group was significantly more than that of the normal group.     

Precision and accuracy of total body bone mass and body composition measurements in the rat using x-ray-based dual photon absorptiometry

Lean body mass (LBM), total body bone mineral mass (BMC), total body bone areal density (BMD), and body fat mass (FM) were measured in rats by dual photon absorptiometry (DXA), using two different instruments. The coefficients of variation for repeated measurements of LBM and FM were about 0.4 and 2.5%, respectively, over an animal body weight range of 150 to 600 g. For BMC and BMD, the coefficients of variation were less than 2%. The correlation coefficients for LBM, FM, BMC, and BMD measured on the two densitometers were all greater than 0.94. The slope of the regression line relating LBM measured by DXA and LBM measured by carcass analysis was 0.999, and the correlation coefficient was 0.99. For FM the slope was 1.05, and the correlation coefficient was 0.98. BMC measures by DXA were falsely low in small animals. For larger animals, the correlation between BMC and ash weight was 0.93, but the slope of the regression line was 0.78. DXA measures of LBM and FM were accurate and reproducible for rats weighing between 150 and 600 g. There was a size-dependent error in BMC, which will be significant in longitudinal measurements of bone mass.