共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
3.
针对煤矿主扇出现振动大,运行状况异常故障,采取振动与噪声测试,分析相结合的方法,对机组进行全面的测试和分析,并对振动故障进行了确切诊断。 相似文献
4.
5.
6.
提高软件可靠性的关键是力求减少软件中的错误。软件的错误可能来源于软件寿命周期内的各个阶段,测试工作在软件生存期中占有重要位置。本文主要讨论一个自行高炮故障诊断专家系统软件的测试。文中介绍了该软件的功能、组成、故障分离过程和测试方法。通过该软件测试的运行,以期达到减少软件中的错误,提高软件可靠性,有效地解决现代军事装备的复杂性同管理体系,人员素质之间的矛盾。 相似文献
7.
8.
赵若希 《中国新技术新产品》2023,(20):58-60
由于传统电力变压器往往会发生振动故障,导致电力系统性能不稳定,因此,该文对750kV高压并联电抗器进行振动测试,并分析其故障。首先,布置高压并联电抗器的测点,快速判断故障发生的位置。其次,采集振动信号特性。最后,诊断750k V高压并联电抗器内部故障,保障电力系统的安全和稳定。试验结果 :750k V高压并联电抗器的振动测试与故障分析的最大振动值与试验设定的最大振动值趋于一致,方法1的最大振动误差数值为56μm,方法2的最大振动误差数值为77μm,证明了750k V高压并联电抗器的振动测试与故障分析方法的有效性。 相似文献
9.
10.
马尔可夫链模型在软件可靠性测试中的应用 总被引:1,自引:0,他引:1
现行的软件可靠性分析方法禁锢了人们从更简单层次对软件系统的可靠性进行研究。基于上述认识,为了缩短软件测试周期,文中提出了一种新的软件可靠性测试分析方法。该方法把马尔可夫链模型运用于软件可靠性测试中,在测试过程中使用了新的评判准则分析测试结果,通过实例证明了该评判准则的实用性和有效性。从而为更快速地评估软件的可靠性提供了可能。 相似文献
11.
12.
13.
Yongkang Chen Mike Bacich Cory Nardin Albert Sitorus Mark M. Weislogel 《Microgravity science and technology》2005,17(4):14-24
The behavior of wall-bound drops and bubbles is fundamental to many natural and industrial processes. Key characteristics
of such capillary systems include interface shape and stability for a variety of gravity levels and orientations. Significant
solutions are in hand for axisymmetric pendent drops for a variety of uniform boundary conditions along the contact line with
gravity acting normal to a planar wall. The special case of a wall-bound drop or bubble that is also pinned at an edge (i.e.
a ‘wall-edge-bound’ drop) is considered here where numerical solutions are obtained for interface shape and stability as functions
of drop volume, contact angle, fluid properties, and uniform gravity vector. For a semi-infinite zero-thickness planar wall
(plate), a critical contact angle is identified below which wall-edge-bound drops are always stable. The critical contact
angle is computed as a function of the gravity vector. The numerical procedure, which makes no account for contact angle hysteresis,
predicts that such wall-edge-bound drops are unconditionally unstable for any gravity field with a component that is tangent
to the wall while inwardly normal to the edge. Select experiments are conducted that support the conclusions drawn from the
numerical results. 相似文献
14.
15.
《Measurement Techniques》1975,18(12):1719-1725
16.
17.
热交换器是将不同温度介质之间的热量通过热传导的形式,由高温介质传递给低温介质,使介质达到生产所需温度的工艺设备,也可作为一种节能设备使用.通过对不同热交换器的结构分析,总结不同热交换器的优缺点、适用环境,为生产工艺设计人员及设备制造单位在选择可降低能耗、提高效率的设备上提供参考. 相似文献
18.
We have synthesized a variety of alkali-metal and ammonium fluorosulfatometallates (titanates, zirconates, and hafnates). The alkali fluorosulfatozirconates and fluorosulfatohafnates have been shown to exhibit efficient roentgenoluminescence (RL) in the UV through visible spectral region, with a maximum at 390–440 nm. Their RL spectra depend significantly on their composition (cation, anion, and water content), coordination of KF and K2SO4, and relative amounts of fluorine and SO4 groups. We have examined the effect of heat treatment on the RL of these compounds. The rubidium and cesium fluorosulfatozirconates Rb3Zr2F9SO4 · 2H2O, Cs2ZrF2(SO4)2 · 2H2O, Cs8Zr4F2(SO4)11 · 16H2O, and Cs2ZrF4SO4 offer the most efficient RL. 相似文献
19.
20.
计量仪器收发工作是沟通计量检定部门以及送检单位之间的桥梁,也是计量检定工作的前提。随着各级计量技术机构业务量的不断增加,计量技术机构除了要树立顾客至上的服务理念之外,同时还要用专业、高效的管理模式来赢得顾客的信赖与认可。在计算机信息技术的不断发展与更新的大环境下,传统的管理模式已经不能适应计量检测工作的需求,因此,要有效的利用网络信息技术来促进计量仪器收发业务管理模式的创新,进而提高计量仪器收发业务管理的工作效率。 相似文献