Fibular transport in conjunction with Hoffman external fixation of the tibia

Tibiofibular synostosis is a salvage procedure commonly used for difficult nonunions of the tibia. It may be carried out by means of transfixion screws, a bone graft, or fibular transfer using Ilizarov (Smith and Nephews Richards, Memphis, Tennessee) or Monticelli-Spinelli (Howmedica Inc, Rutherford, New Jersey) devices. This paper describes fibular transfer employing the Hoffmann external fixator, which is commonly used in the management of tibial fractures or nonunions.     

Superoxide as an intermediate signal for serotonin-induced mitogenesis

BACKGROUND: Although many community hospitals and trauma centers reuse external fixator components, no published studies have examined the cost-effectiveness or the effect on the rate of complications of reuse. This study reports the preliminary results of a program for the reuse of selected components of external fixators at a trauma center. METHODS: After removal from the patient, fixators were cleaned and examined by a single nurse responsible for the program. Components in good repair were returned to the operating room stock for reuse, whereas those showing specific signs of wear were discarded. No component was used more than three times. The medical center charged patients a loaner fee equal to the hospital's cost for reusable components of external fixators. Data were collected for all fixators applied in the 15 months before and after institution of the program (69 and 65 fixators, respectively). RESULTS: The overall mean hospital charge for a fixator decreased 32% as a result of the reuse program (from $4,067 to $2,791). For the two fractures most commonly treated with external fixation, the distal radius and tibial plafond fractures, the mean charge decreased 44 and 29%, respectively. The mean hospital cost for a fixator decreased 34% as a result of the program (from $1,864 to $1,238). There were no differences in the rates of reoperation or complications before and after institution of the reuse program. No patient had mechanical failure of a new or reused fixator body. CONCLUSION: The preliminary results of this program are encouraging. We recommend that institutions reusing these devices develop specific programs outlining criteria for reuse and guidelines for reprocessing devices for reuse. The results of this study represent an important first step in the validation of the efficacy and safety of reuse of external fixator components.     

Function of stiff joints may be restored by Ilizarov joint distraction

Three patients with joint stiffness caused by trauma or infection are reported. The involved joints are the interphalangeal joint of the thumb, patellofemoral joint, and ankle joint. As an alternative for the indicated arthrodesis in these patients, treatment with articulating joint distraction was performed. By use of adapted Ilizarov external ring fixators, gradual distraction was applied to loosen the joint, followed after loosening by a period of exercise during distraction. In all three patients this experimental approach led to a decrease in pain and improvement of joint function that persisted for at least 2 years after treatment. With the use of Ilizarov joint distraction, joint function in cases of joint stiffness may be restored, and the need for an arthrodesis can be postponed.     

New developments in stabilization of dia- and metaphyseal fractures of long tubular bones

Nail, plate and external fixator are since decades the most frequently and stabilizers for the surgical treatment of dia- and metaphyseal fractures. These elements are still present today. However, there were important changes in recent years. Together with better knowledge and understanding of fracture healing, fracture biology, implant metallurgy and mechanics and a more and more specified application of these techniques, this resulted in improved possibilities for the treatment of injured patients. Beside an overview about the current discussion of unreamed and reamed nail insertion new trends, techniques and nails are presented for the different long bones (retrograde nails, spiral blade, flex-nail humerus and a distal aiming device (DAD) for interlocking screws). In addition, new approach techniques for nailing (stab incision) and minimally invasive percutaneous plate osteosynthesis (MIPO) for metaphyseal fractures of the proximal and distal femur and proximal tibia are described including the necessary techniques for control of axes and rotation.     

Nonselective debridement and antimicrobial cleansing of a venting ductal breast carcinoma

Supracondylar femur fractures above a total knee replacement are rare injuries that may be challenging to treat. We present a case of an elderly woman whose supracondylar femur fracture was not deemed amenable to conventional treatment. This patient underwent fixation of her femur fracture above a total knee replacement using an Ilizarov external fixator. The fixator was removed at 10 weeks, at which time the fracture was solidly healed. At the most recent follow-up, the patient is 19 months postinjury. She is fully weight bearing without walking aids and has a knee range of motion of 0 degree to 110 degrees.     

Ilizarov procedure in pseudarthrosis

The treatment of nonunions has made an important development through the work of Ilizarov describing the principles of compression and distraction by using the ring-fixator. While local compression is sufficient in hypertrophic nonunions, the treatment of choice for atrophic infected nonunions with bony defects is a corticotomy followed by a segmental transport, especially in case of an osseous defect larger than 3 cm. Primary shortening poses a better starting point both for soft-tissue reconstruction and for early docking. External fixation systems are the ring-fixator, the unilateral fixator and hybrid systems combining both fixation methods. The use of a ring-fixator makes a shorter time of osseous consolidation possible when compared to a unilateral system (25,8 d/cm - 35,8 d/cm). Soft-tissue reconstruction before initiation of transport also shortens the time of osseous consolidation compared to later soft-tissue coverage. A docking-region in the metaphyseal area is supported by minimal internal fixation and cancellous bone graft. Segmental transport is complicated by local infection, regenerate failure (4.3% and regenerate fracture (2.9%).     

Load transmission through the callus site with external fixation systems: theoretical and experimental analysis

The fracture callus contribution to the total rigidity of external fixator-fractured bone element was analysed. This study was achieved from both theoretical and experimental perspectives. The theoretical study was done using the finite element method with a three-dimensional model. In this model, both the callus and the development of its elastic characteristics were considered. A series of 38 New Zealand-California white rabbits with tibial fractures treated with some external fixation system was used in this study. Such devices could reproduce either rigid or elastic features. The frame dynamization can be obtained at different fracture healing stages. Animals were classified into four series: (1) rigid fixators, (2) dynamized fixators two weeks after surgery, (3) three weeks after surgery and (4) four weeks after surgery. Tension tests were performed to evaluate callus strength. Theoretical results showed significant levels of callus load transmission (85.5%) when the callus elastic modulus is 1/100 of the elastic modulus of intact bone in an external fixator with rigid features. Experimental analysis of the callus obtained with different external fixator systems did not show differences among them. This fact implies that the immature callus theoretically modelled (E = 100 N mm-2) appears early in the rabbit fracture model (before two weeks, when first dynamization was made), for this reason no differences were found between the two types of treatment (rigid and dynamized systems). This fact questions the reliability of the dynamization process in external fixation of fractures and it implies accurate investigations in the clinical field.     

Idiopathic epilepsy in the dog

The authors present a brief history of the development of the Ilizarov external fixator, and the classic uses associated with it. A preliminary study of 3 patients using 56 frames is presented. The Ilizarov external fixator is successfully used in these cases in place of traditional fixation.     

Type-II external fixation, using new clamps and positive-profile threaded pins, for treatment of fractures of the radius and tibia in dogs

A new external fixation system for repair of fractures of the radius and tibia was developed that uses positive-profile threaded pins. This system allows for addition of a fixation clamp between 2 installed clamps, predrilling of pin holes through a drill sleeve, use of positive-profile threaded pins in all locations, and easier application of full pins. Type-II external fixators were applied, using this system, to fractures in 10 client-owned dogs, and outcome was evaluated. All fractures healed without complications. Duration of surgery, mean time until radiographic evidence of a bridging callus, and mean time until removal of the external fixator were shorter, and frequency of pin loosening were less than with other techniques. Pin loosening was uncommon. This system provides an important improvement in external skeletal fixation.     

Recent progress in orthopaedic managements of osteoporosis-related fractures

Recent progress in orthopaedic treatment of osteoporosis-related fractures was reviewed. In the femoral neck fractures, the bipolar prosthesis reduces acetabular erosion or central migration, and press-fit stem or cemented stem lowers the incedence of the stem sinking. In thorocanteric fractures, compression hip screws are most commonly used, however, in the cases of unstable fractures with severe osteoporosis, it is difficult to start weight-bearing within a few weeks of surgery because varus deformites or translations at the fracture site sometimes occur. To avoid this disadvantage, the gamma nail has been found to be more effective. In paralysis due to burst fractures of the osteoporotic spine, surgical decompression and spinal instrumentation is the established response. A special orthosis named 'rucksack type orthosis' has been devised and is used for patients who have back pain due to anterior bending posture of the trunk. In distal radius fractures, external fixators are now more frequently used.     

Normalization of cognitive and functional assessment instruments for dementia (NORMACODEM) (I): objectives, content and population]

We give an account of the first Austrian clinical results of a prospective study dealing with fractures of the femoral shaft treated with the UFN-system, the intraoperative handling especially considering the intra- and postoperative complications. The UFN-system combines the advantages of numerous proximal interlocking options for the treatment of nearly all femoral fracture patterns with that of the unreamed nailing (biological osteosynthesis, primary stability with individual after-treatment, high patient's comfort and early mobilisation). Within two years (VII/94-VII/96) sixty closed and four second degree open fractures were stabilized with the unreamed femoral nail. In twelve cases we used the spiral blade interlocking technique. Five times we changed from external fixator to the UFN. The fractures were classified according to the AO-classification. In 64 implanted UFN there occurred twelve intraoperative and four postoperative complications. In five cases reoperation was necessary. Failings in the operative technique, numerous different experienced surgeons and a deficient after_treatment led to our pitfalls.     

Treatment of closed femoral diaphyseal fractures with external fixators in children

From August 1992 to July 1996, 57 patients with closed femoral fractures were treated by external fixator in the Orthopaedic and Traumatology Clinics, School of Medicine, Dicle University. The technique was applied to children with closed femoral fractures. Their mean age was 6 (range 4-12) years old. The mean hospitalisation period was 8 (range 5-15) days. Fixators were removed on an average of 55 (range 38-79) days. The mean follow-up period was 18 (range 9-36) months. Pintract infection was observed in 3 and refracture in 1 patient. Infection was controlled with oral antibiotics and local dressing. An external fixator was applied to a patient in whom refracture developed. No patient had malunion, nonunion, or leg length discrepancy. We propose that external fixation in closed femoral shaft fractures of children could be a rational alternative mode of therapy, since it has some advantages and can be easily removed without undergoing a second round of anaesthesia.     

Analysis of inter-fragmentary movement as a function of musculoskeletal loading conditions in sheep

It is well accepted that inter-fragmentary movement influences the fracture healing process. Small axial movement can stimulate callus formation whereas larger shear movement delays the healing process. It is, therefore, essential for optimal fracture healing to minimize shear and to control axial movement. Unfortunately, the complex gap movements are mostly unknown under the large variety of clinical as well as experimental conditions of fracture fixation. To further understand the complex interactions of musculoskeletal loading and inter-fragmentary movements in bones and to reduce the need for animal experiments, a three-dimensional (3D) musculoskeletal model of the left hind limb of a sheep was developed. From 3D ground reaction forces and inverse dynamics, resultant joint loading was determined over a gait cycle. Muscle and joint contact forces were derived from an optimization routine and internal loads in the tibia and metatarsus from beam theory. Finally, inter-fragmentary movements were calculated from the bony loading condition and experimentally determined stiffness matrices of monolateral AISF external fixator constructs. Both the joint contact forces at the hip and gap movement of a mid-shaft tibial fracture agree with in vivo data reported in the literature. The bones proved to be mainly axially loaded with slightly increasing shear forces toward their ends. The results suggest that inter-fragmentary movement of metatarsal fractures is fairly independent of the fracture location whereas the movement increases in proximal tibial fractures compared to those in the distal and diaphyseal tibia. Considerable shear movement was found for all locations and external fixator mountings. However, shear movement could be minimized with a cranio-lateral rather than a cranio-medial shift from the cranial fixator plane.     

Retrograde nailing of humerus shaft fractures with the unreamed humerus nail. An international multicenter study

Combined with the new unreamed humeral nail (UHN) (Synthes), the retrograde approach to the endomedullary canal of the humeral shaft promises careful reduction and fixation of humeral shaft fractures. This prospective multicenter study reports and analyses 102 retrograde nailings with the UHN and their operative procedures. Seven patients with pathological fractures have died meanwhile, but 75 patients could be followed up until bone healing. Seventy-three fresh humeral shaft fractures, 12 pseudarthrosis, 3 refractures and 14 pathological fractures have been treated with the UHN. In 98 cases (96.1%) the surgeon estimated fracture stability well enough to initiate immediate postoperative elbow and shoulder mobilization. The difficulties involved with free-hand interlocking proximally at the nail tip in 5.9%, fissure or avulsion at the insertion point in 3.9% and radial nerve palsy also in 3.9% of the cases were the most important intraoperative complications. In all 75 patients followed up, bone healing occurred, but five fractures (6.7%) needed more than 8 months connected with a second operative procedure. In one case spongious bone transplantation and new locking bolts had been performed. In three cases a special compression device has been used, whereas in one case also a new nail and in the second spongious bone transplantation had been added. In the fifth case plate osteosynthesis had been performed. At the end of treatment 89.4% of the patients had excellent shoulder function and 88.0% excellent elbow function. Once the indication for surgery is established, the UHN can be considered a reliable and safe implant for stabilizing humeral shaft fractures.     

Biomechanical and densitometric bone properties after callus distraction in sheep

Assessment of biomechanical stability of diaphyseal bone lengthened by callus distraction is an unsolved problem. A middiaphyseal corticotomy was performed in the left tibia of 24 sheep. After 7 days, callus distraction was begun at a rate of 0.5 mm every 12 hours for 30 days using a standard unilateral fixator system. Animals were euthanized 4, 8, or 12 weeks after the end of distraction. The lengthened tibia and the contralateral control tibia from each animal were evaluated by radiographic, densitometric (dual energy xray absorptiometry, quantitative computed tomography), and biomechanical (axial compression testing, torsion testing to failure) methods. The bone mineral density and maximum torque for the lengthened tibia were significantly greater in the 8-week group than in the 4-week group. However, the values in the 12-week group were significantly smaller than in the 8-week group. In the lengthened tibias, there was a correlation between the maximum torque and the bone mineral density, and between the maximum torque and the bone density. Bone density measurements are useful prognosticators for the safe removal of external fixators after leg lengthening procedures. By using these methods, clinical fractures after leg lengthening could be avoided in the future.     

Stabilization procedures in large soft-tissue and bone defects

When stabilizing fractures with large soft tissue and bone defects, the primary concern is to avoid additional vascularization damage. Therefore, external fixation is still the standard method. In metaphysical fractures, joint transfixation should be avoided if possible. Concerning closed comminuted fractures of femoral and tibial shaft fractures, interlocking nailing shows the lowest complication rate. The introduction of unreamed nailing of open fractures shows the same low infection rate as external fixation, so it can be considered an alternative method. Early plate fixation is applied for fractures of the upper extremities as well as the proximal and distal femur, if secure covering with vital tissue can be provided. As this is not guaranteed in the case of the tibial shaft, plate fixation remains the absolute last resort. Concerning distal and proximal fractures of the tibial pylon and tibia head, plate fixation is very often applied for definitive stabilization. However, the secondary application represents a considerably lower infection and fracture-healing risk.     

Inhibitory effect of anaphylactic reaction of Sosiho-Tang

The Ilizarov method has broad applications for the generation of bone and soft tissue via an external fixator composed of small pins, tensional wires, rings, hinges and distractors. The success of the technique depends on adherence to Ilizarov's principles of tension-stress phenomenon: preservation of the tissues' blood supply, frequent distraction in small increments, and full function of the extremity.     

Treatment of nonunion of the humerus using the Ilizarov external fixator

Ilizarov's method of monofocal compression was used in 30 humeri with a diaphyseal pseudarthrosis. Twenty-one patients had previous surgery but had loosening of the osteosynthesis material. Nine patients initially were treated with a hanging cast, resulting in interfragmentary distraction. Fourteen nonunions were hypertrophic, and 16 were atrophic, of which six were infected. A complete circular frame was used only in the first nine patients, whereas the remaining 21 patients were treated with the modified semicircular fixator. Union was obtained in all but two patients, with an average consolidation time of 4.5 months (range, 2.5-10 months). No patient required additional bone grafting. Apart from superficial pin tract infection seen in most of the patients, three had a minor temporary sensory neurologic problem. Four patients experienced a second fracture after removal of the fixator that required a second application of an Ilizarov frame. Although similar results with regard to union are reported after plate osteosynthesis, there was no radial nerve palsy or deep infection in this series, indicating that the treatment by the Ilizarov technique is associated with less complications. The authors' findings suggest that the Ilizarov method is a reliable treatment for humeral nonunions, even after multiple previous operations or in the event of infection.     

Open fractures caused by high velocity missiles: the outcome of treatment of 39 fractures followed for 1-3 years

Between 1993 and 1995, thirty-three patients having 39 fractures caused by missiles fired from a high velocity rifle were reviewed retrospectively between 1 and 3 years after injury and the outcome of treatment assessed. Majority (33 out of 39) were Grade III. Union was achieved in 35 out of 39 fractures, there was deep infection and delayed union in one case each. Non-union occurred in three fractures. The fractures were stabilized using different techniques, but highest complication rate was seen with the use of the static external fixator. This was related to the severe nature of the injury as well as the inherent limitations of the external fixator. Revision of the external fixator with internal fixation after healing of the soft tissues seems to be the direction of the future.     

Enhancing administrator-clinician relationships: the role of psychological type

The mechanical behaviour of the Castaman external fixator was determined using different mounting configurations in a system that simulated a long bone fracture during the formation of the bone callus. The first stage of the study was the determination of the stress-strain characteristics of the system with monolateral mounting. The second stage, the object of this study, is the analysis of the system with bilateral mounting and a comparison between the two configurations of the external fixator examined. Strain gauge analysis was used to determine the strains and stresses in the various elements of the system (fiches and external unit). Numerical techniques (FEM) were also used in order to confirm the results obtained using the simulation system. The results obtained show clearly the greater stiffness of the bilateral system. Combined bending and compressive stresses are present on both the screws and the external units, and reveal a little asymmetrical behaviour due to the conicity of the screws.