Effect of SrZrO3 on phase structure and electrical properties of 0.974(K0.5Na0.5)NbO3–0.026Bi0.5K0.5TiO3 lead-free ceramics

(0.974−x)(K_0.5Na_0.5)NbO₃–0.026Bi_0.5K_0.5TiO₃–xSrZrO₃ lead-free piezoelectric ceramics have been prepared by the conventional solid state sintering method. Systematic investigation on the microstructure, crystalline structures as well as electrical properties of the ceramics was carried out. With the addition of SrZrO₃, the rhombohedral–orthorhombic phase transition temperature of the ceramics increases. Both the rhombohedral–orthorhombic and orthorhombic–tetragonal phase transitions of the ceramics were modified to be around room temperature when x~0.05, and as a result remarkably strong piezoelectricity has been obtained in 0.924(K_0.5Na_0.5)NbO₃–0.026Bi_0.5K_0.5TiO₃–0.05SrZrO₃ ternary system, whose piezoelectric parameters were d₃₃=324 pC/N and k_p=41%.     

Structure and electrical properties of Nd2O3-doped 0.82Bi0.5Na0.5TiO3–0.18Bi0.5K0.5TiO3 ceramics

Nd₂O₃ doped 0.82Bi_0.5Na_0.5TiO₃–0.18Bi_0.5K_0.5TiO₃ (abbreviated to BNKT) binary lead-free piezoelectric ceramics were synthesized by the conventional mixed-oxide method. The results show that the BNKT ceramics with 0–0.15 wt.% Nd₂O₃ doping possesses a single perovskite phase with rhombohedral structure. The grain size of BNKT decreased with the addition of Nd₂O₃ dopant. The temperature dependence of the dielectric constant ?_r revealed that there were two-phase transitions from ferroelectric to anti-ferroelectric and anti-ferroelectric to paraelectric. A diffuse character was proved by linear fitting of the modified Curie–Weiss law. At room temperature, the specimens containing 0.0125 wt.% Nd₂O₃ with homogeneous microstructure presented excellent electrical properties: the piezoelectric constant d₃₃ = 134 pC/N, the electromechanical coupling factor K_p = 0.27, and the dielectric constant ?_r = 925 (1 kHz).     

Al2O3包覆LiNi0.5Mn0.5O2的电化学性能

通过溶胶-凝胶法在LiNi0.5Mn0.5O2表面包覆一层Al2O3,采用X射线衍射(XRD),扫描电镜(SEM),恒电流充放电和电化学阻抗谱(EIS)对材料的结构和形貌及电化学性能进行了研究。实验结果表明,经过包覆后,有效地抑制了电解液对正极材料的侵蚀,包覆量为1.0%(质量分数)放电容量略有提高,循环性能也得到明显改善。因此包覆是一种改善LiNi0.5Mn0.5O2材料的电化学性能的有效方法。     

NaNbO3–CaZrO3–Bi0.5Na0.5TiO3三元系陶瓷的相结构与储能性能

铌酸钠(NaNbO₃)无铅陶瓷由于其无毒和出色的储能性能，在脉冲功率电容器领域吸引了越来越多的关注。然而，由于较大的有效储能密度(W_rec)和高的储能效率(η)不能同时实现，限制了其商业化。通过构建局域随机场，增加弛豫特性来提高储能性能的策略。采用传统固相法制备了(1–x)(0.96Na Nb O₃–0.04CaZrO₃)–x Bi_0.5Na_0.5TiO₃ (x=0.05、0.10、0.15、0.20)反铁电储能陶瓷，研究了不同含量Bi_0.5Na_0.5TiO₃对0.96Na Nb O₃–0.04CaZrO₃陶瓷的相结构、微观形貌、介电性能和储能特性的影响。结果表明：随着Bi_0.5Na_0.5TiO₃含量的增加，(1–x)(0.96NaNbO₃...     

(1-x)Li0.05(K0.5Na0.5)0.95NbO3-x(Bi0.5Na0.5)TiO3无铅压电陶瓷的结构与电性能研究

采用固相反应法制备了(1-x)Li0.05(K0.5Na0.5)0.95NbO3-x(Bi0.5Na0.5)TiO3(LKNN-BNT)无铅压电陶瓷,研究了BNT的添加量x(0,0.005,0.01,0.02)对LKNN-BNT陶瓷的结构与电性能影响。X射线衍射(XRD)分析结果表明当x≤0.005时,陶瓷为正交钙钛矿结构,而当x≥0.01时,陶瓷则转变为四方钙钛矿结构,说明该陶瓷的多型相转变(PPT)区域为0.005相似文献   

High energy density capacitors based on 0.88BaTiO3–0.12Bi(Mg0.5, Ti0.5)O3/PbZrO3 multilayered thin films

Multilayered thin films consisting of both 0.88BaTiO₃–0.12Bi(Mg_0.5,Ti_0.5)O₃ ferroelectric layers and PbZrO₃ antiferroelectric layers were prepared by sol–gel method, exhibiting high dielectric permittivity, large polarization, high recoverable energy storage density and high energy storage efficiency. A maximum polarization of 93 μC/cm², recoverable energy storage density of 24.7 J/cm³ and energy storage efficiency of ~60% have been achieved at an electric field of 1050 kV/cm. Furthermore, the energy storage performance of the multilayered thin films was improved by modified layer-by-layer annealing process, where larger polarization (115 μC/cm²), higher recoverable energy storage density (33 J/cm³) and higher energy storage efficiency (~70%) were obtained.     

Phase formation of REBa2Cu3O7−δ (RE: Y0.5Gd0.5, Y0.5Nd0.5, Nd0.5Gd0.5) superconductors from nanopowders synthesised via co-precipitation

Phase formation of REBa₂Cu₃O_7−δ (RE: Y_0.5Gd_0.5, Y_0.5Nd_0.5, Nd_0.5Gd_0.5) superconductors synthesised via co-precipitation (COP) method were investigated by thermogravimetric analysis (TGA), differential thermal analysis (DTA) and X-ray diffraction (XRD) analysis. All samples showed identical thermal decomposition behaviour from the thermogram in which 5 major weight losses were observed. However, XRD of the samples at different heat treatment temperatures showed different diffraction patterns indicating different thermolytic processes. Meanwhile, transmission electron microscopy and surface area analysis revealed that the powders obtained from COP have particle sizes ranging from 7 to 12 nm with relatively large surface area. Molar ratios of prepared samples obtained were near to the theoretical values as confirmed by elemental analyses using X-ray fluorescence (XRF). The T_C(R=0) for sintered YGd, YNd and NdGd were 87 K, 86 K and 90 K, respectively. Surface morphological study via scanning electron microscope showed the structures of samples were dense and non porous.     

Microstructure and electrical properties of (Na0.5K0.5)1−2xMgxNbO3–Bi0.5Na0.5TiO3 lead-free piezoelectric ceramics

0.975[(Na_0.5K_0.5)_1−2xMg_xNbO₃]–0.025(Bi_0.5Na_0.5TiO₃) (KNMN–BNT, x=0, 0.01, 0.02, 0.03, 0.04 and 0.05) lead-free piezoelectric ceramics were fabricated by the conventional solid-state sintering method. The dependence of Mg content on the microstructure and electrical properties of the ceramics is investigated. The X-ray diffraction (XRD) analysis revealed that an appropriate amount of Mg diffused into the KNN–BNT lattice to form a stable solid solution, the ceramics possessed a pure perovskite structure, and a morphotropic phase boundary (MPB) between the orthorhombic and tetragonal phases was observed with the composition of 0.02≤x≤0.05. The orthorhombic–tetragonal transition temperature (T_O–T) is less than 95 °C and the Curie temperature (T_c) is almost unchanged (~360 °C) with the increase of MgO content. The ceramics with x=0.02 showed enhanced piezoelectric and ferroelectric properties because of close proximity to the MPB, i.e., d₃₃~210 pC/N, k_p~0.41, 2E_c~22.4 kV/cm and 2P_r~39.2 μC/cm². Moreover, the dielectric properties exhibited optimal effects with x=0.02, that is ε_r~637 and tan δ~0.09. These results indicate that the introduction of MgO is an effective method to improve the density as well as the electrical properties and the temperature stability of the KNN–BNT ceramics. As a result, the KNMN–BNT ceramic is a promising candidate for lead-free piezoelectric materials.     

Co2O3掺杂对(Na0.8K0.2)0.5Bi0.5TiO3陶瓷结构与电性能的影响

采用传统固相法制备了(Na0.8K0.2)0.5Bi0.5TiO3+xmol%Co3+(BNKT-xCo,x=0-8)无铅压电陶瓷,研究了Co2O3掺杂对BNKT陶瓷的显微结构与电学性能的影响。研究表明:适量的Co2O3掺杂促进了晶粒生长,纯BNKT陶瓷样品在介电温谱上有2个介电反常峰Td和Tm,Co2O3掺杂后使所有陶瓷样品的第一个介电反常峰Td消失,表明Co3+抑制铁电-反铁电相变。室温下样品的介电、铁电和压电性能表明Co2O3起硬性掺杂效应。当x=7时陶瓷样品电性能最佳,其中机械品质因子Qm=498,介电损耗tanδ=2.3%(1kHz),压电常数d33=103pC/N,平面机电耦合系数kp=27%。     

Effect of the Nb2O5 content on electrical properties of lead-free BaTiO3–Bi0.5Na0.5TiO3 ceramics

(1−x)BaTiO₃–xBi_0.5Na_0.5TiO₃ (BT–BNT) ceramics were prepared by the solid-state reaction method. With an increase of BNT content, both the Curie temperature and the room temperature resistivity increased. At 1 mol% BNT addition, the sample was not semiconducting, due to Bi₂O₃ volatilization resulting from the decomposition of pre-calcined BNT during sintering. Appropriate extra Nb₂O₅ doping in the raw materials could offset Bi₂O₃ volatilization and neutralize the redundant acceptor Na⁺ ions. When the extra Nb₂O₅ content was 0.6 mg, the sample room-temperature resistivity was 6.3×10³ Ω cm, with the Curie point about 135 °C and a high PTC effect of ∼3 orders of magnitude.     

Effect of sintering temperature on ferroelectric properties of 0.94(K0.5Na0.5)NbO3–0.06LNbO3 system

Lead free 0.94(K_0.5Na_0.5NbO₃)–0.06(LiNbO₃) (KNN–LN) system was synthesized by conventional solid state reaction route (CSSRR). The KNN–LN system was calcined at 850 °C for 6 h for the formation of single perovskite phase whereas the sintering was done at 1050 °C, 1080 °C and 1100 °C for 4 h, respectively. The KNN–LN samples sintered at 1080 °C show better properties: room temperature (RT) dielectric constant (?_r) ∼936, dielectric loss (tan δ) ∼0.016 at 1 MHz, a relatively high bulk density (ρ) ∼4.385 g/cm³, which is 97.5% of the theoretical density (TD ∼ 4.51), remnant polarization (P_r) ∼6.4 μC/cm² and coercive field (E_c) ∼9.6 kV/cm have been observed.     

铁钕掺杂K0.5Na0.5NbO3陶瓷的压电介电性能

采用传统陶瓷制备技术制备了新型的K0.5Na0.5NbO3+0.2%molFe2O3+x%molNd2O3压电陶瓷,研究了该体系陶瓷的压电性能及介电性能。研究结果表明,在烧结温度为1120℃、4 h时,该体系陶瓷均具有相对较好的电学性能,并在x为0.2时性能最佳,其压电常数d33为125pC/N,机电耦合系数Kp为37%,机械品质因素Qm为155,介电常数εr为561,介质损耗tanδ为0.08。     

Sr0.5Zr2(PO4)3陶瓷的力学性能研究

用共沉淀法和低分子有机溶剂分散获得SZP粉体,经干压成型和烧结得到SZP陶瓷.研究了其力学性能与烧结温度烧结时间和添加剂用量的关系.最佳工艺条件为添加MgO6wt%,1300℃或ZnO3wt%,1200℃均烧结1.5小时,SZP陶瓷的抗压强度分别可达244.0MPa和226.2MPa.     

(1-x)Bi0.5(Na0.8K0.2)0.5TiO3-xKSbO3压电陶瓷的制备及性能研究

采用传统固相法制备了新型(1-x)Bi0.5(Na0.8K0.2)0.5Ti O3-xKSbO3无铅压电陶瓷,利用XRD、SEM等测试技术表征了该陶瓷的晶体结构、表面形貌、压电和介电性能。研究结果表明,在所研究的组成范围内陶瓷材料均能形成纯的钙钛矿固溶体。在室温下,当KSb O3的掺杂量为1%时,该体系表现出较好的介电性能:εr和tanδ分别为2 231和0.055。     

Magnetic and magnetotransport properties of La1−xSrxMn0.5Сo0.5O3 perovskites

La_1?xSr_xMn_0.5Сo_0.5O₃ (x ≤ 0.75) perovskites have been studied as a function of temperature by neutron powder diffraction (NPD), magnetization and magnetoresistance measurements. The NPD data show that x = 0.15 and 0.5 compounds are stoichiometric, so the Sr²⁺ doping transforms Co²⁺ ions into the Co³⁺ ones, whereas manganese ions remain in the 4+ oxidation state as in the parent ferromagnetic compound ${\mathrm{LaCo}}_{\mathrm{0.5}}^{\mathrm{2}+}{\mathrm{Mn}}_{\mathrm{0.5}}^{\mathrm{4}+}{\mathrm{O}}_{\mathrm{3}}$. The magnetization data show a decrease in the Curie temperature from 215 K for the compound with x = 0 down to 147 K for the compound with x = 0.05. The compounds with x > 0.15 show an increase in T_C up to 260 K (x = 0.75) in spite of a gradual decrease of the spontaneous magnetization. The stoichiometric compound x = 0.5 demonstrates a sharp ferromagnet-paramagnet transition with T_C = 250 K. However, there is no visible coherent magnetic contribution to the NPD patterns. All compounds are semiconductors and exhibit large magnetoresistance gradually increasing with decrease of temperature. The magnetic data have been interpreted assuming that the Co³⁺ ions are in high spin state, however, there is a fraction of cobalt ions in low spin state. It is suggested that the superexchange interaction between Co³⁺ ions in the high spin state and Mn⁴⁺ ions is ferromagnetic and that the ferromagnetism of the compounds with x > 0.5 and high T_C is associated with positive exchange interactions between Co³⁺ being in high spin state and Mn⁴⁺ ions distributed within the short range regions. Based on the NPD results and magnetization data the magnetic phase diagram has been constructed.     

Piezoelectric and dielectric properties of (Bi0.5Na0.5)0.94Ba0.06TiO3–Ba(Zr0.04Ti0.96)O3 lead-free piezoelectric ceramics

Lead-free piezoelectric ceramics of (1 − x)(Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃–xBa(Zr_0.04Ti_0.96)O₃ (abbreviated as BNBT–BZT100x, wherein x from 0 to 10 mol%) were fabricated. We have studied effects of amount of BZT content on the electrical properties and microstructures. X-ray diffraction analysis indicates that a solid solution is formed when BZT diffuses into the BNBT lattice, and further the crystal structure of sintered hybrid changes from rhombohedral to tetragonal symmetry along with increasing BZT content. Piezoelectric property measurements reveal that the BNBT–BZT4 ceramics has the highest piezoelectric performance, for example, the piezoelectric constant d₃₃ reaches to 167 pC/N and planar electromechanical coupling factor k_p is up to 0.27. In addition, the effect of Bi₂O₃ on the electrical properties and microstructure of the BNBT–BZT4 ceramics have also been studied, and found that the doping of Bi enhances the piezoelectric properties of ceramics.     

0.995Bi0.5(Na0.8K0.2)0.5TiO3-0.005(LiyK1-y)SbO3压电陶瓷的制备及性能研究

采用传统固相法制备了新型0.995Bi0.5(Na0.8K0.2)0.5TiO3-0.005(Li y K1-y)SbO3无铅压电陶瓷,利用XRD、SEM等测试技术表征了该陶瓷的晶体结构、表面形貌、压电和介电性能。研究结果表明,在所研究的组成范围内陶瓷材料均能形成纯的钙钛矿固溶体。压电性能随y的增加先增加后减少,在y=10%时压电常数及机电耦合系数达到最大值(d33=111 pC/N,k p=0.220)。     

(1–x)(0.75K0.5Bi0.5TiO3–0.25BiFeO3)–xNa0.73Bi0.09NbO3电介质陶瓷的微观结构与储能性能

为满足不断增长的高性能储能设备需求,亟需研发能量存储性能出众的电介质电容器。采用传统固相反应法制备了(1–x)(0.75Bi_0.5K_0.5TiO₃–0.25BiFeO₃)–xNa_0.73Bi_0.09NbO₃(x=0～0.4)(简称BKT–BF–xNBN)样品。在380kV/cm电场下,样品表现出良好的储能性能,可实现可回收能量密度W_rec=4.23J/cm³和效率η=81.2%。NBN的引入对BKT基陶瓷的微观结构与弛豫性产生了显著影响,导致晶粒尺寸减小、陶瓷更加致密,并诱导促使极性纳米区域的形成。此外,样品还具有出色的充放电性能(放电时间t_0.9<75ns,放电电流密度C_D=757.9A/cm²,放电功率P_D=94.7MW/cm³)。这些结果表明BKT–BF–xNBN无铅铁电...     

Eu掺杂对Bi5Fe0.5Co0.5Ti3O15陶瓷电磁性能的影响

用传统固相烧结法制备了Bi5–xEuxFe0.5Co0.5Ti3O15(BEFCT–x:x=0,0.35,0.55,0.85)陶瓷样品,对比研究了它们的结构和电磁性能。X射线衍射分析表明:掺杂未导致明显杂相,材料的剩余极化(2Pr)随掺杂量的增加呈先增加后减小的变化趋势,在Eu掺杂量为0.55时,材料的2Pr达到最大值,为11.2μC/cm2,升幅达143%,可以由Eu掺杂导致氧空位的抑制和铋氧层的破坏所形成的竞争机制解释。随Eu含量的增加,材料的剩余磁化单调上升,最大达到0.28 A m2/kg,比未掺杂时增加了2个数量级,从晶格失配、耦合增强以及共生结构等方面的综合效果解释了这一现象。材料的介电温度谱显示,Eu掺杂未明显损害材料的热稳定性,Eu掺杂所导致的介电损耗行为可能与氧空位或其他点缺陷有关联。