Evaluation of the confinement effect of nanoclay on the kinetics of styrene atom transfer radical polymerization

The grafting through method was employed to study the effect of nanoclay confinement on the atom transfer radical polymerization (ATRP) of styrene. An ammonium salt containing a double bond on its structure was used as a clay modifier. Employing ATRP to polymerize styrene in the presence of modified montmorillonite resulted in a finely well‐defined polystyrene nanocomposite. The gas chromatography (GC) results showed the linear increase of ln(M₀/M) versus time, which indicated the controlled behavior of the polymerization. Another confirmation of the living nature of the polymerization was the linear increase of molecular weight against monomer conversion concluded from the gel permeation chromatography (GPC) data. Nanoclay exerted acceleration on the polymerization of free polystyrene chains. The polydispersity indexes of polymer chains increased by the addition of nanoclay. In the case of clay‐attached polystyrene chains, number and weight‐average molecular weights were lower than that of freely dispersed polystyrene chains. The polydispersity index of the clay‐attached chains was higher in respect to the freely dispersed polystyrene chains. The living nature of polymer chains was more elucidated by Fourier transform infrared spectroscopy (FTIR). Exfoliation of the clay layers in the polymer matrix of polystyrene nanocomposite containing the lowest amount of nanoclay has proven by Transmission Electron Microscopy (TEM). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of poly(styrene‐co‐butyl acrylate)/clay nanocomposite latexes in miniemulsion by AGET ATRP

Polymer/clay nanocomposite latexes in the form of positively charged nanoparticles were synthesized by a newly developed initiating system, activators generated by electron transfer (AGET), which has been employed in atom transfer radical polymerization (ATRP). These clay‐dispersed latexes were synthesized using AGET ATRP of styrene and butyl acrylate in a miniemulsion system in which, ascorbic acid as a reducing agent was added drop wise to reduce termination reactions. Particle size and particle size distribution of resulted nanocomposite latexes were characterized by dynamic light scattering (DLS). These latexes were in the range of 138 to 171 nm in size. Gel permeation chromatography (GPC) was used to characterize the molecular weight and molecular weight distribution of the resultant copolymer nanocomposites. GPC traces showed that polymers of narrow molecular weight distribution and low Polydispersity Index (PDI) have been synthesized; this clearly shows ATRP reaction is conducted successfully. By increasing nanoclay content, molecular weight of the nanocomposites decreases. The presence of the nanofiller increases the thermal stability of the nanocomposites as investigated by thermogravimetric Analysis (TGA). Glass transition temperature of nanocomposites increases compared with the neat copolymer which was studied by differential scanning calorimetry (DSC). scanning electron microscope (SEM) showed sphere morphology of polymer particles synthesized by miniemulsion polymerization. X‐ray diffraction (XRD) and transmission electron microscopy (TEM) results showed that mixed intercalated and exfoliated morphology is obtained. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Preparation of tailor‐made polystyrene nanocomposite with mixed clay‐anchored and free chains via atom transfer radical polymerization

Tailor‐made polystyrene nanocomposite with mixed free and clay‐attached polystyrene chains was synthesized using atom transfer radical polymerization. Vinylbenzyl trimethylammonium chloride having a double bond, which could be incorporated into polystyrene chains by a grafting through process, was used as a nanoclay modifier. Conversion and molecular weight evaluation was carried out using gas chromatography and gel permeation chromatography, respectively. The thermogravimetric analysis results confirmed the elevated thermal stability of the nanocomposites in comparison with the neat polystyrene sample. Additionally, the T_g increases by clay loading was confirmed by differential scanning calorimetry (DSC). The difference in the degradation temperature of C? Br bond in attached and free polystyrene chains was well revealed in DSC thermograms. Finally, a lower clay loading resulted in an exfoliated structure as proved by X‐ray diffraction and transmission electron microscopy results. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Use of clay-anchored reactive modifier for the synthesis of poly (styrene-co-butyl acrylate)/clay nanocomposite via in situ AGET ATRP

Atom transfer radical polymerization using activators generated by electron transfer (AGET ATRP) was employed to synthesize well-defined poly (styrene-co-butyl acrylate)/clay nanocomposites. Dodecyltrimethylammonium bromide (DDTMAB) and Vinylbenzyltrimethylammonium chloride (VBTMAC) surfactants were used as clay modifier. The classical surfactant is used to expand the interlayer gallery of montmorillonite; however, double bond of reactive modifier participates in chain propagation process and forms clay-attached polymer chains. Subsequently synthesis of attached and free poly (styrene-co-butyl acrylate) chains and their composition was confirmed by Fourier-transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance spectroscopy (¹H NMR). Narrow distribution of nanocomposites molecular weight was confirmed by gel permeation chromatography (GPC). Partially exfoliated clay layers in the copolymer matrix were revealed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Thermal properties of the nanocomposites were evaluated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Thermal decomposition of the nanocomposites was hindered in the presence of nanoclay. Dynamic mechanical thermal analysis (DMTA) results show that addition of nanoclay was also resulted in enhanced storage modulus (E′) in comparison with the neat copolymer. Lower glass transition temperature of nanocomposites was displayed by DSC.     

Synthesis and characterization of exfoliated poly(styrene‐co‐methyl methacrylate) nanocomposite via miniemulsion atom transfer radical polymerization: an activators generated by electron transfer approach

Exfoliated poly(styrene‐co‐methyl methacrylate) nanocomposites were synthesized using activators generated by electron transfer for atom transfer radical polymerization (AGET ATRP). Miniemulsion polymerization was used for its abundant advantages to encapsulate inorganic materials and eliminate organic solvents from products for environmentally friendly purposes. Cetyltrimethylammonium bromide (CTAB) as a cationic surfactant, which is an effective surfactant at higher temperatures, was used to stabilize the miniemulsion system. Successful miniemulsion AGET ATRP was carried out by using 4,4'‐dinonyl‐2,2'‐bipyridine (dNbPy) as a hydrophobic ligand. Formation of monodispersed droplets and particles with sizes in the range of 200nm was examined by dynamic light scattering (DLS). Conversion and molecular weight study were also carried out using gravimetry and gel permeation chromatography, respectively. By adding clay content, a decrease in the conversion and molecular weight of the nanocomposites are observed. However, an increase in the PDI values of nanocomposites was observed by the addition of nanoclay content. Thermogravimetric analysis results demonstrate that thermal stability of all the nanocomposites in comparison with the neat copolymer increases. Differential scanning calorimetry results show that T_g decreases by increasing clay content. Monodisperse distribution of spherical shape particles with sizes in the range of ∼ 200 nm was demonstrated by using scanning electron microscopy images of nanocomposite containing 1 wt% of nanoclay, which is more compiled with DLS results. Transmission electron microscopy results shows well‐dispersed exfoliated clay layers in the polymer matrix of PSMNM 1, which is coincidence with X‐ray diffraction data. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Preparation of polystyrene/MMT nanocomposite through in situ RAFT polymerization by new chain transfer agent derived from bisphenol A

Reversible addition‐fragmentation chain transfer (RAFT) polymerization was performed in the presence of a new RAFT agent based on bisphenol A and modified clays and successfully prepared polystyrene/MMT nanocomposite. The structure of RAFT agent was investigated by Fourier transform infrared spectroscopy (FT‐IR) and proton nuclear magnetic resonance spectroscopy (¹H NMR). The polymer had well‐defined molecular weight and narrow polydispersity obtained by gel permeation chromatography (GPC). The morphology of polystyrene/MMT nanocomposite was investigated by X‐ray diffraction (XRD) and transmission electron microscopy (TEM) and was found to be exfoliated. Thermal stability of pure polystyrene and polystyrene/MMT synthesized via RAFT polymerization was also investigated and showed better thermal stability for nanocomposite. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesize of polymer–silicate nanocomposites by in situ metal‐catalyzed living radical polymerization

Polymer–silicate nanocomposites were synthesized with atom transfer radical polymerization (ATRP). An ATRP initiator, consisting of a quaternary ammonium salt moiety and an α‐phenyl chloroacetyl chloride moiety, were intercalated into the interlayer spacings of the layered silicate. Subsequent ATRP of styrene with CuCl/2,2′‐bipyridine (bipy) as the catalyst with the initiator‐modified silicate afforded homopolymers with predictable molecular weights and low polydispersities, both characteristics of living radical polymerization. The polystyrene nanocomposites contained both intercalated and exfoliated silicate structures. The prepared materials were characterized by XRD, SEM, TEM, FTIR, and ¹H NMR techniques. Effect of silicate on thermal properties and glass transition temperature of polystyrene was investigated using thermogravimetric analysis and differential scanning calorimetric techniques. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

One pot,two step sequence converting atom transfer radical polymerization directly to radical trap-assisted atom transfer radical coupling

Monobrominated polystyrene (PStBr) chains were prepared using standard atom transfer radical polymerization (ATRP) procedures at 80 °C in THF, with monomer conversions allowed to proceed to approximately 40%. At this time, additional copper catalyst, reducing agent, and ligand were added to the unpurified reaction mixture, and the reaction was allowed to proceed at 50 °C in an atom transfer radical coupling (ATRC) phase. During this phase, polymerization continued to occur as well as coupling; expected due to the substantial amount of residual monomer remaining. This was confirmed using gel permeation chromatography (GPC), which showed increases in molecular weight not matching a simple doubling of the PStBr formed during ATRP, and an increase in monomer conversion after the second phase. When the radical trap 2-methyl-2-nitrosopropane (MNP) was added to the ATRC phase, no further monomer conversion occurred and the resulting product showed a doubling of peak molecular weight (M_p), consistent with a radical trap-assisted ATRC (RTA-ATRC) reaction.     

ABA2-type triblock copolymer composed of PCL and PSt: synthesis and characterization

ABA₂-type (Y-shaped) triblock copolymer made from poly(??-caprolactone) (PCL) and polystyrene were synthesized by the combination of enzymatic ring-opening polymerization (eROP) and atom transfer radical polymerization (ATRP). First, CCl₃-terminated PCL were synthesized by eROP of ??-caprolactone in the presence of initiator 2,2,2-trichloroethanol and biocatalyst Novozyme 435, followed by the esterification of the resulting PCL with 2,2-dichloro acetyl chloride to obtain trifunctional macroinitiator. The well-defined Y-shaped block copolymer was then synthesized by ATRP of styrene. The systems display characteristics of a living radical polymerization as indicated by linear first-order kinetics, linearly increasing molecular weight with conversion, and low polydispersities. The macromolecular structures and composition were characterized by HNMR, GPC, and FTIR. The thermal properties were characterized by differential scanning calorimetry.     

Studies on the development of branching in ATRP of styrene and acrylonitrile in the presence of divinylbenzene

Branching atom transfer radical polymerization (ATRP) of styrene and acrylonitrile was attempted in the presence of divinylbenzene targeting toward soluble branched copolymer. The kinetics and the development of branching with monomer conversion were studied in detail. Gas chromatography (GC), gel permeation chromatography (GPC) coupled with multi-angle laser light scattering (MALLS), proton nuclear magnetic resonance (¹H NMR) spectroscopy and intrinsic viscosity determination were used to monitor the polymerization process and characterize the obtained copolymer. Analysis of conversion of reactants, the growth manner of molecular weight with monomer conversion and GPC traces proved that the primary chains with low polydispersity formed mainly at the early stage and then were linked in a statistical manner to start the branching at the middle or late stage. The more the branching agent was used, the earlier the branching occurred, and too much higher level of branching agent resulted in gelation. For the selected ratio of [t-BBiB]/[DVB]/[St]/[AN] = 1/0.9/15/15, with monomer conversion less than 40%, primary chains with low polydispersity formed from the polymerization of St, AN and DVB, and only a part of the primary chains contained pendent vinyl group. When monomer conversion was up to 40%, the pendent vinyl groups participated in polymerization, resulting in the linking of the primary chains statistically to start the branching. The branching became significant at monomer conversion up to 50%, giving rise to a steep increase in molecular weight and width in molecular weight distribution. As the polymerization proceeded, the polymer composition gradually approached the feed composition, identifying the obtained branched copolymer provided some gradients are in its primary chains. Finally, branched copolymer bearing about six primary chains was prepared at monomer conversion near to 80%, its absolute weight average molecular weight was about 8.87 × 10⁴.     

Flame retardant polyurethane nanocomposite: Study of clay dispersion and its synergistic effect with dolomite

Polyurethane–clay nanocomposite adhesives were prepared by different synthetic routes and their microstructures were determined by X‐ray diffraction measurements and from transmission electron microscopy images. The preparation method of the polyurethane nanocomposite adhesives was systematically changed, that is, condensation either in the presence or absence of catalyst, concentration and type of nanoclay, premixing order of nanoclay (nanoclay was either premixed with the polyol or isocyanate part) and by using MDI surface treated nanoclays. Depending on the polymerization conditions cluster, intercalated, and exfoliated clay structures were obtained. The flame retardant properties of the manufactured nanocomposite adhesives and the synergistic effect of clay in combination with dolomite were investigated by cone calorimeter and UL 94 vertical burning tests. The results indicate that addition of nanoclay reduces burning time and the total heat evolved (THE) at flame out, and that the type of assembled clay structure (cluster, intercalated or exfoliated) had a significant effect on the flame retardant property. Nanocomposites with 3 wt % of clay loading gave the shortest burning time, the lowest THE and also UL 94 V‐2 ratings were reached, although the flame retardancy in terms of heat release rate and time to ignition was not improved. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of poly(acrylic acid)-g-polystyrene copolymer by successive ATRP

A series of well-defined amphiphilic graft copolymers consisting of hydrophilic poly(acrylic acid) backbone and hydrophobic polystyrene side chains were synthesized by hydrolysis of poly(methyl acrylate)-g-polystyrene under basic condition. The backbone and the side chains were synthesized by atom transfer radical polymerization (ATRP), so the molecular weight could be tuned by the variation of the feed ratio or monomer conversion, and the molecular weight distributions of amphiphilic graft copolymers were kept low (PDI < 1.35). The products were characterized by FT-IR, ¹H NMR, ¹³C NMR, and gel permeation chromatography (GPC). The study of self-assembly behavior can benefit the formation of the well-defined structures of the products.     

Preparation of star polymers of hyperbranched polyglycerol core with multiarms of PS‐b‐PtBA and PS‐b‐PAA

Atom transfer radical polymerization (ATRP) was applied to synthesize a new kind of star polymers of hyperbranched polyglycerol (HPG) core with multiarms of PS‐b‐PtBA and PS‐b‐PAA by using the “core first” technique. The HPG core was obtained by anionic polymerization of glycerol first, and then the pendant hydroxyl groups of HPG were esterified with 2‐bromoisobutyryl bromide to yield the HPG‐g‐Br, which was used as macroinitiator for ATRP of the first monomer (St) and then second monomer (tBA). After hydrolysis of the PtBA block, poly(acrylic acid) (PAA) side chains were formed. The final products and intermediates were characterized by GPC, NMR, and FTIR in detail. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Biodegradation of montmorillonite filled oxo‐biodegradable polyethylene

Oxo‐biodegradation of polyethylene has been well studied with different pro‐oxidants and it has been shown that pro‐oxidants have limited role in the oxidation of polyethylene and do not have any role in microbial growth. However, in few recent studies, montmorillonite clay has been reported to promote the growth of microbes by keeping the pH of the environment at levels conducive to growth. In an attempt to improve the overall oxo‐biodegradation of polyethylene, montmorillonite nanoclay has been used in this study along with a pro‐oxidant. Film samples of oxo‐biodegradable polyethylene (OPE) and oxo‐biodegradable polyethylene nanocomposite (OPENac) were subjected to abiotic oxidation followed by microbial degradation using microorganism Pseudomonas aeruginosa. The progress of degradation was followed by monitoring the chemical changes of the samples using high‐temperature gel permeation chromatography (GPC) and infrared spectroscopy (FTIR). The growth of bacteria on the surface of the polymer was monitored using environmental scanning electron microscopy. GPC data and FTIR results have shown that the abiotic oxidation of polyethylene is influenced significantly by the pro‐oxidant but not by nanoclay. But, the changes in molecular weight distribution and FTIR spectra for the biodegraded samples indicate that the growth rate of P. aeruginosa on OPENac is significantly greater than that on OPE. It indicates that nanoclay, by providing a favourable environment, helps in the growth of the microorganism and its utilisation of the polymer surface and the bulk of the polymer volume. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate) triblock copolymer by atom transfer radical polymerization

The synthesis of triblock copolymer poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate), using atom transfer radical polymerization (ATRP), is reported. The copolymers were prepared in two steps. First, polystyrene was synthesized by ATRP using α,α′‐dichloro‐p‐xylene/CuBr/bpy as the initiating system; Second, polystyrene was further used as macroinitiator for the ATRP of octadecyl acrylate to prepare ABA triblock copolymers in the presence of FeCl₂·4H₂O/PPh₃ in toluene. Polymers with controlled molecular weight (M_n = 17,000–23,400) and low polydispersity index value (1.33–1.44) were obtained. The relationship between molecular weight versus conversion showed a straight line. The effect of reaction temperature on polymerization was also investigated, showing a faster polymerization rate under higher temperature. The copolymers were characterized by FTIR, ¹H‐NMR, DSC, and GPC and the crystallization behavior of the copolymers was also studied. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1539–1545, 2004     

Atom transfer radical polymerization and copolymerization of vinyl acetate catalyzed by copper halide/terpyridine

Copper‐mediated atom transfer radical polymerization (ATRP) is versatile for living polymerizations of a wide range of monomers, but ATRP of vinyl acetate (VAc) remains challenging due to the low homolytic cleavage activity of the carbon‐halide bond of the dormant poly(vinyl acetate) (PVAc) chains and the high reactivity of growing PVAc radicals. Therefore, all the reported highly active copper‐based catalysts are inactive in ATRP of VAc. Herein, we report the first copper‐catalyst mediated ATRP of VAc using CuBr/2,2′:6′,2″‐terpyridine (tPy) or CuCl/tPy as catalysts. The polymerization was a first order reaction with respect to the monomer concentration. The molecular weights of the resulting PVAc linearly increased with the VAc conversion. The living character was further proven by self‐chain extension of PVAc. Using polystyrene (PS) as a macroinitiator, a well‐defined diblock copolymer PS‐b‐PVAc was prepared. Hydrolysis of the PS‐b‐PVAc produced a PS‐b‐poly(vinyl alcohol) amphiphilic diblock copolymer. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Preparation of polystyrene–clay nanocomposites via dispersion polymerization using oligomeric styrene‐montmorillonite as stabilizer

This study describes the preparation of polystyrene–clay nanocomposite (PS‐nanocomposite) colloidal particles via free‐radical polymerization in dispersion. Montmorillonite clay (MMT) was pre‐modified using different concentrations of cationic styrene oligomeric (‘PS‐cationic’), and the subsequent modified PS‐MMT was used as stabilizer in the dispersion polymerization of styrene. The main objective of this study was to use the clay platelets as fillers to improve the thermal and mechanical properties of the final PS‐nanocomposites and as steric stabilizers in dispersion polymerization after modification with PS‐cationic. The correlation between the degree of clay modification and the morphology of the colloidal PS particles was investigated. The clay platelets were found to be encapsulated inside PS latex only when the clay surface was rendered highly hydrophobic, and stable polymer latex was obtained. The morphology of PS‐nanocomposite material (after film formation) was found to range from partially exfoliated to intercalated structure depending on the percentage of PS‐MMT loading. The impact of the modified clay loading on the monomer conversion, the polymer molecular weight, the thermal stability and the thermomechanical properties of the final PS‐nanocomposites was determined. Copyright © 2012 Society of Chemical Industry     

Synthesis of clay‐dispersed poly(styrene‐co‐methyl methacrylate) nanocomposite via miniemulsion atom transfer radical polymerization: A reverse approach

Poly(styrene‐co‐methyl methacrylate) nanocomposites were synthesized using reverse atom transfer radical polymerization (RATRP) in miniemulsion. Cetyltrimethylammonium bromide (CTAB) as a cationic surfactant applicable at higher temperatures was used for miniemulsion stabilization. Successful RATRP was carried out by using 4,4′‐dinonyl‐2,2′‐bipyridine (dNbPy) as ligand. Monodispersed droplets and particles with sizes in the range of 200 nm were revealed by dynamic light scattering (DLS). Conversion and molecular weight study was carried out using gravimetry and size exclusion chromatography (SEC) respectively. By adding clay content, a decrease in the conversion and molecular weight and an increase in the PDI value of the nanocomposites are observed. Thermal stability of the nanocomposites in comparison with the neat copolymer is revealed by thermogravimetric analysis (TGA). Increased T_g values by adding clay content was also obtained using differential scanning calorimetry (DSC). Scanning electron microscopy (SEM) images of the nanoconposite with 1 wt % of nanoclay loading, display monodispersed spherical particles with sizes in the range of ～ 200 nm. SEM findings are more compiled with dynamic light scattering (DLS) results. Well‐dispersed exfoliated clay layers in the polymer matrix of the nanocomposite with 1 wt % nanoclay loading is confirmed by transmission electron microscopy (TEM) images and X‐ray diffraction (XRD) data. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Encapsulation of organomodified montmorillonite with PMMA via in situ SR&;NI ATRP in miniemulsion

Encapsulation of organomodified montmorillonite within poly (methyl methacrylate) via in situ atom transfer radical polymerization with simultaneous reverse and normal initiation system (SR&NI ATRP) was successfully performed. Miniemulsion polymerization technique has been employed for its abundant advantages to encapsulate inorganic materials. Successful SR&NI ATRP was carried out using 4,4′-dinonyl-2,2′-bipyridine (dNbPy) as a hydrophobic ligand and cetyltrimethylammonium bromide (CTAB) as an effective cationic surfactant at high temperatures. Homogeneous distribution of droplets and particles with sizes in the range of around 170 nm was evaluated by dynamic light scattering (DLS) analysis. Final monomer conversion and molecular weight were determined by gravimetry and size exclusion chromatography (SEC) respectively. By increasing nanoclay content, conversion and molecular weight of nanocomposites decreased. Meanwhile, an increase in PDI values was also observed. X-ray diffraction (XRD) analysis results display organoclay layers disordered and delaminated in the polymer matrix. Thermal stability improvement of all the nanocomposites in comparison with the neat polymer was revealed by thermogravimetric analysis (TGA). Homogeneous distribution of spherical particles with sizes in the range of 170 nm was demonstrated by scanning electron microscopy (SEM) images. These results are complied with the DLS results. Transmission electron microscopy (TEM) image display a dispersion of partially exfoliated clay stacks in the matrix of PMNM 2.     

Preparation of nanoclay‐dispersed polystyrene nanofibers via atom transfer radical polymerization and electrospinning

In this study, clay‐dispersed polystyrene (PS) nanocomposites were prepared with the in situ atom transfer radical polymerization method and were subsequently electrospun to form nanofibers 450–650 nm in diameter. The polymer chains extracted from the clay‐dispersed nanofibers exhibited a narrow range of molecular weight distribution. Thermogravimetric analysis (TGA) confirmed a higher thermal stability of the resulting nanocomposites compared to PS. The effect of the weight ratio of montmorillonite on the thermal properties of the nanocomposites was also studied by TGA. Differential scanning calorimetry revealed that the addition of the nanoclay increased the glass‐transition temperature. Moreover, degradation of the bromide chain‐end functionality took place at low temperatures. Scanning electron microscopy showed that the average diameter of the fibers was around 500 nm. The dispersion of clay layers was also evaluated by Al atoms in the PS matrix with the energy‐dispersive X‐ray detection technique. Transmission electron microscopy confirmed the exfoliation of the nanoclay within the matrix. However, the clay layers were oriented along the nanofiber axis. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010