Effect of hydroxypropyl β-cyclodextrin on physical properties and transition parameters of amylose–lipid complexes of native and acetylated starches

The effect of hydroxpropyl β-cyclodextrin (HPβ-CD) on physical properties and digestibility of wheat, potato, waxy maize and high-amylose maize starches before and after acetylation was studied. Effect of HPβ-CD on amylose–lipid complexes in native and acetylated potato starches synthesized using α-lysophosphatidylcholine was also studied. Acetylation increased swelling factor, amylose leaching, peak viscosity and susceptibility to α-amylase hydrolysis, but decreased gelatinization temperature and enthalpy and gel hardness in all starches. HPβ-CD markedly increased swelling factor and amylose leaching in native and acetylated wheat starches but had little or no impact on other starches. Wheat starch gelatinization enthalpy decreased in the presence of HPβ-CD but gelatinization temperature of all the starches was slightly increased. HPβ-CD had no influence on enzymatic hydrolysis. Melting enthalpy of amylose–lipid complex in both native and acetylated wheat starches was decreased by HPβ-CD. Acetylation also decreased the melting enthalpy of amylose–lipid complex in wheat starch. Similar trend of thermal transitions was observed in the presence of HPβ-CD for the amylose–lipid complexes synthesized in potato starch. Acetylation reduces the complex formation ability of the amylose polymer. Similar to gelatinization, acetylation widened the melting temperature range of amylose–lipid complexes while shifting it to a lower temperature. Higher swelling and amylose leaching, and decreased gelatinization temperature and enthalpy resulting from acetylation of wheat starch is consistent with its influence on starch hydration. Similar effects resulting from the inclusion of HPβ-CD were consistent with the disruption of amylose–lipid complex by HPβ-CD which promotes granular hydration.     

Effect of Heat‐Moisture Treatment on Structural and Thermal Properties of Rice Starches Differing in Amylose Content

Starches from glutinous rice (1.4% amylose), Jasmine rice (15.0% amylose) and Chiang rice (20.2% amylose) were exposed to heat‐moisture treatment (HMT) at 100 °C for 16 h and at different moisture levels (18, 21, 24 and 27%). The effect of heat‐moisture treatment on structural and thermal properties of these three rice starches was investigated. The HMT did not change the size, shape and surface characteristics of rice starch granules. The A‐type crystalline pattern of rice starches remained unchanged after HMT. The relative crystallinity (RC) and the ratio of short‐range molecular order to amorphous (RSA) of heat‐moisture treated glutinous and Jasmine rice starches decreased with increasing moisture level of the treatments. In contrast, the RC of the treated Chiang rice starch remained practically unchanged. A peak of crystalline V‐amylose‐lipid complexes was clearly presented in all treated Chiang rice starches. The peak became progressively stronger with increasing moisture level of the treatment. Differential scanning calorimetry (DSC) of all treated rice starches showed a shift of the gelatinization temperature to higher values. Increasing moisture level of the treatments increased the onset gelatinization temperature (T_o) but decreased the gelatinization enthalpy (ΔH) of rice starches. A broad gelatinization temperature range (T_c‐T_o) with a biphasic endotherm was found for all treated Chiang rice starches and Jasmine rice starch after HMT₂₇ (HMT at 27% moisture level). Additionally the (T_c‐T_o) of treated Chiang rice starches increased linearly with increasing moisture level of the treatments.     

Hydrothermal Modifications of Tropical Tuber Starches. 1. Effect of Heat‐Moisture Treatment on the Physicochemical,Rheological and Gelatinization Characteristics

Cassava, sweet potato and arrowroot starches have been subjected to heat‐moisture treatment (HMT) under different conditions using a response surface design of the variables. A comparative study was performed on the pasting properties, swelling behaviour and the gelatinization properties of the modified starches and also on the rheological and textural properties of their pastes. X‐ray diffraction studies have shown that cassava starch exhibited a slight decrease in crystallinity, whereas sweet potato and arrowroot starches showed an increase in crystallinity after HMT at 120ºC for 14 h with 20% moisture. The swelling volume was reduced and the solubility was enhanced for all three starches after HMT, but both effects were more pronounced in the case of arrowroot starch. The decrease in paste clarity of the starch after HMT was higher in the case of cassava and sweet potato starches. Viscosity studies showed that the peak viscosity of all three starches decreased after HMT, but the paste stability increased as seen from the reduced breakdown ratio and setback viscosity. Studies on rheological properties have shown that storage and loss moduli were higher for the starches heat‐moisture treated at higher moisture and lower temperature levels than the corresponding native starches. Storage of the gel at ‐20ºC resulted in a significant increase in storage modulus for all the three starches. All the textural parameters of the gels were altered after the treatment which depended on the nature of the starch and also the treatment condition.     

Crystallinity and Pasting Properties of Freeze‐Thawed High Amylose Maize Starch

Native and defatted high amylose (about 70%) maize starch gels were freeze‐dried or repeatedly freeze‐thawed, and the effects of the treatments on the crystallinity, pasting viscosity, and resistance to digestive enzymes of the dried starch were examined. Both native and defatted starches showed a B‐type crystal structure in the X‐ray diffractogram, but the crystallinity was decreased by repeating the freeze‐thawing cycle. In the DSC thermogram, the freeze‐thawed starches exhibited two endothermic transitions in the temperature ranges of 90—110 °C and 130—160 °C, representing amyloselipid complexes and amylose‐amylose double helix crystals, respectively. By defatting, the melting enthalpy for the amylose double helices was increased, indicating that the residual lipids inhibited the amylose crystal formation. Ice crystals in the starch gel matrix became smaller and the ice cell membrane became thinner as freeze‐thawing was repeated. The freeze‐dried or freeze‐thawed starch powders swelled to a paste by heating in water as did typical granular starch, but the setback by cooling was significantly high due to the rapid retrogradation of leached amylose. By the treatments, the resistance of the starch to digestive enzymes was also raised. The defatted starches displayed greater paste viscosity and resistance to digestive enzymes than the native starches. But the overall viscosity was decreased as the number of freeze‐thawing cycles increased.     

Structures and Physicochemical Properties of Acid‐Thinned Corn,Potato and Rice Starches

The structures and physicochemical properties of acid‐thinned corn, potato, and rice starches were investigated. Corn, potato, and rice starches were hydrolyzed with 0.14 N hydrochloric acid at 50 °C until reaching a target pasting peak of 200—300 Brabender Units (BU) at 10% solids in the Brabender Visco Amylograph. After acid modification the amylose content decreased slightly and all starches retained their native crystallinity pattern. Acid primarily attacked the amorphous regions within the starch granule and both amylose and amylopectin were hydrolyzed simultaneously by acid. Acid modification decreased the longer chain fraction and increased the shorter chain fraction of corn and rice starches but increased the longer chain fraction and decreased the shorter chain fraction of potato starch, as measured by high‐performance size‐exclusion chromatography. Acid‐thinned potato starches produced much firmer gels than did acid‐thinned corn and rice starches, possibly due to potato starch's relatively higher percentage of long branch chains (degree of polymerization 13—24) in amylopectin. The short‐term development of gel structure by acid‐thinned starches was dependent on amylose content, whereas the long‐term gel strength appeared dependend on the long branch chains in amylopectin.     

Physicochemical,crystallinity, pasting and thermal properties of heat‐moisture‐treated pinhão starch

The effect of heat‐moisture treatment (HMT) on the properties of pinhão starches under different moisture and heat conditions was investigated. The starches were adjusted to 15, 20 and 25% moisture levels and heated to 100, 110 and 120°C for 1 h. The X‐ray diffractograms, swelling power, solubility, gel hardness, pasting properties and thermal properties of the native and HMT pinhão starches were evaluated. Compared to native starch, there was an increase in the X‐ray intensity and gel hardness of HMT starches, with the exception of the 25% moisture‐treated and 120°C heat‐treated starch. HMT reduced the swelling power and solubility of the pinhão starches when compared to native starch. There was an increase in the pasting temperature, final viscosity and setback and a decrease in the peak viscosity and breakdown of HMT pinhão starches compared to native starch. HMT increases the gelatinisation temperature of native pinhão starch and reduces gelatinisation enthalpy.     

High‐Amylose Starches to Bridge the “Fiber Gap”: Development,Structure, and Nutritional Functionality

Although high‐amylose starches are not a recent innovation, their popularity in recent years has been increasing due to their unique functional properties and enhanced nutritional values in food applications. While high‐amylose maize, barley, and potato are commercially available, high‐amylose variants of other main crops such as wheat and rice have once been developed more recently and will be available commercially in the near future. This review summarizes the development, structure, and nutritional functionality of high‐amylose starches developed and reported so far. The range of biotechnological strategies utilized are reviewed, as are the consequent effects on structural properties at different length scales, as well as sensory aspects of foods containing high‐amylose starch (HAS). This review identifies the molecular and microstructural features contributing to digestive enzyme resistance not only in native HAS but also in forms of relevance to food processing. During heat treatment, HAS tends to retain or form dense molecular structures that resist amylase degradation through the retention of the granular structure as well as helices (type‐2 resistant starch [RS]), reassociation of glucan chains (type‐3 RS), and formation of lipid–amylose complexes (type‐5 RS). The review also identifies opportunities for food manufacturers and consumers to incorporate HAS in food products and diets for better nutritional outcomes.     

Influence of hydroxypropylation on retrogradation properties of native,defatted and heat-moisture treated potato starches

Recent studies have shown that defatting and heat-moisture treatment cause structural changes within the amorphous and crystalline regions of potato starch. Furthermore, the alkaline reagents (NaOH and Na₂SO₄) used during hydroxypropylation has been shown to cause structural changes within the amorphous and crystalline regions of native, defatted and heat-moisture treated starches. In this study, we have compared (using different techniques) the retrogradation properties of potato starch before and after physical (defatting and heat-moisture treatment), and chemical (alkaline treatment and hydroxypropylation) modification. Turbidity measurements showed that changes in turbidity during storage (4°C for 24 h and then at 40°C for 29 days) of native, defatted and heat-moisture treated gelatinized starch pastes were influenced by the interplay of two factors: (1) interaction between leached starch components (amylose–amylose, amylose–amylopectin, amylose–amylopectin), and (2) interaction between granule remnants and leached amylose and amylopectin. In alkali treated gelatinized native, defatted and heat-moisture treated starch pastes, turbidity changes on storage was influenced by aggregation of granule remnants. Hydroxypropylation decreased the rate and extent of increase in turbidity during storage of native, defatted and heat-moisture treated starches. The change in turbidity during storage of hydroxypropylated starch pastes was influenced by the interplay between: (1) steric effects imposed by hydroxypropyl groups on chain aggregation, (2) aggregation between small granule remnants, and (3) settling of large granule remnants beneath the path of the spectrophotometer beam. Stored gelatinized pastes of native, defatted and heat-moisture treated starches gave a `B' type X-ray pattern. A similar pattern was also observed after alkaline treatment, and hydroxypropylation. However, the X-ray intensity of the strong reflection at 5.2 Å decreased after alkaline treatment and hydroxypropylation. The retrogradation endotherm (monitored by differential scanning calorimetry) occurred after 2 days storage in native, defatted and heat-moisture treated starches. A similar trend was also observed after alkaline treatment. However, the retrogradation endotherm appeared only after 7 days in hydroxypropylated starches. The enthalpy of retrogradation in all starches decreased on alkaline treatment and hydroxypropylation.     

Resistant starch and thermal,morphological and textural properties of heat‐moisture treated rice starches with high‐, medium‐ and low‐amylose content

This study investigated the effects of heat‐moisture treatment (HMT) on the resistant starch content and thermal, morphological, and textural properties of rice starches with high‐, medium‐ and low‐amylose content. The starches were adjusted to 15, 20 and 25% moisture levels and heated at 110°C for 1 h. The HMT increased the resistant starch content in all of the rice starches. HMT increased the onset temperature and the gelatinisation temperature range (T_finish–T_onset) and decreased the enthalpy of gelatinisation of rice starches with different amylose contents. This reduction increased with the increase in the moisture content of HMT. The morphology of rice starch granules was altered with the HMT; the granules presented more agglomerated surface. The HMT affected the textural parameters of rice starches; the high‐ and low‐amylose rice starches subjected to 15 and 20% HMT possessed higher gel hardness.     

The Interaction Between Surfactants and 2‐Hydroxy‐3‐(N,N‐dimethyl‐N‐dodecylammonium)‐propyloxy Starches

The phase behavior of temperature‐responsive hydrophobically modified starches and the interaction between oxidized potato amylose and hydrophobically modified potato amylopectin have been investigated by rheology, turbidity measurements and differential scanning calorimetry. When oxidized amylose was mixed with hydrophobically modified amylopectin, a viscosity peak was observed, indicative of a guest‐host interaction between the oxidized amylose and the hydrophobically modified amylopectin. A series of oxidized and hydrophobically modified potato starches were investigated in the presence of an anionic and cationic surfactant. A coil‐helix transition of the investigated starches was observed in the presence of surfactant, with the exception of a cationic surfactant combined with a hydrophobically modified zwitterionic starch of high positive net charge. The destabilizing mechanism (the phase separation) of the hydrophobically modified starches was studied as well as the difference in stabilizing capacity between the investigated cationic and anionic surfactants.     

Influence of heat–moisture treatment and annealing on functional properties of sorghum starch

Sorghum starch was annealed in excess water at 50 °C for 24 h. Starch was also modified under heat–moisture treatment at 110 °C after adjusting various moisture contents (20, 30 and 40%) for 8 h. Significant decrease in chain lengths of amylose fraction in HMT starches was observed. Heat moisture treated (HMT) and annealed (ANN) starches showed lower granule sizes, swelling power, peak and setback viscosity but higher retrogradation as compared to native starch. HMT starch with addition of 40% moisture showed a decrease in relative crystallinity. HMT and ANN starch gels were observed to be harder than native starch gel.     

Characterization of Residues from Partially Hydrolyzed Potato and High Amylose Corn Starches by Pancreatic α‐Amylase

High amylose corn starch (HACS) and potato starch were hydrolyzed by pancreatic α‐amylase in vitro. Residues after hydrolysis were collected and characterized for their physicochemical properties and molecular structure. Compared with raw starches, residues had lower apparent amylose contents and higher resistant starch contents. The gelatinization enthalpy of residues from HACS increased while enthalpy of residues from potato starch decreased from 15.4 to 11.3 J/g. Peak viscosity and breakdown values of the residues from potato starch were markedly decreased but final viscosity values did not show much change. Chain length distribution of debranched amylopectin from the residues indicated that the relative portion of short chain in the residue decreased for both starches. More molecules with intermediate chain length (DP 16—31) were found in residue after 48‐h hydrolysis of potato starch.     

6种不同种类直支链淀粉相互混合对其回生的影响

目的 研究6种不同种类直支链淀粉相互混合对其回生的影响。方法 将玉米淀粉、甘薯淀粉、木薯淀粉、马铃薯淀粉、糯米淀粉、小麦淀粉等6种不同种类直支链淀粉分离出来, 然后两两混合, 研究不同直支链混合对其回生率的影响。 结果 马铃薯支链淀粉与甘薯支链淀粉以2:8(m:m)混合回生率最低, 为60.0%, 玉米支链淀粉与木薯支链淀粉以8:2(m:m)混合回生率最低为52.6%, 小麦支链淀粉与糯米支链淀粉以8:2(m:m)混合回生率最低为51.2%, 甘薯支链淀粉与小麦支链淀粉以1:1(m:m)混合回生率最低为53.7%。木薯支链淀粉与小麦直链淀粉以1:1(m:m)混合时所得淀粉回生率最大, 达到了92.0%, 混合淀粉回生后X射线晶型为B型。结论 不同种类直支链淀粉混合对其回生率影响很大, 食品加工中尽量不要混合使用木薯支链淀粉与小麦直链淀粉。     

Effect of cross‐linking on some properties of potato (Solanum tuberosum L.) starches

Starches separated from different potato cultivars were modified using two different cross‐linking agents: epichlorohydrin (EPI) and phosphoryl chloride (POCl₃) at different concentrations (1.0 and 2.0 g kg^?1 POCl₃; 2.5, 5.0 and 10 g kg^?1 EPI). Differential scanning calorimetry, rheological and retrogradation measurements were performed to characterise the influence of cross‐linking on the properties of potato starches. Cross‐linking considerably reduced swelling power, solubility, water‐binding capacity and paste clarity. The decrease became greater as the reagent concentration increased. The starches treated with 1.0 g kg^?1 POCl₃ exhibited exceptionally higher swelling power than their counterpart native starches. Neither cross‐linking agent caused any change in morphology of the starch granules. Studies on the phase transitions associated with the gelatinisation showed significantly higher values for the onset temperature (T_o), peak temperature (T_p), conclusion temperature (T_c) and enthalpy of gelatinisation (ΔH_gel) for the cross‐linked starches than the native starches. Starches treated with both the reagents showed lower peak storage modulus (G′) and loss modulus (G″) than their native counterparts. The tendency of the starch pastes towards retrogradation increased considerably with increases in storage duration. However, the starches treated with 1 g kg^?1 POCl₃ exhibited much lower syneresis than the other cross‐linked starches. Copyright © 2006 Society of Chemical Industry     

Digestibility and Pasting Properties of Rice Starch Heat‐Moisture Treated at the Melting Temperature (Tm )

Non‐waxy and waxy rice starches adjusted to 20% moisture (wet based, w.b.) were heated in a differential scanning calorimeter to determine the optimum parameters for producing slowly digestible starch (SDS). Starches heated to the temperature of melting (T_m) and held for 60 min in the calorimeter showed a slow digestibility compared to unheated samples. Digestibility decreased by 25 and 10%, respectively, for non‐waxy and waxy rice starches relative to non‐treated starches. Heat‐moisture treatment of waxy corn, non‐waxy corn and wheat starches at the T_m determined for non‐waxy rice starch did not result in significant decreases in digestibility. For waxy rice starches heat‐treated in microwave or conventional ovens at the T_m , there were slight but significant increases in digestibility of the treated starches compared to non‐treated starches at all incubation times. Digestibility was higher for starches heated for 30 min than for 60 min. Non‐waxy rice starches did not show any significant changes in digestibility. Heat‐moisture treatment at the T_m and the holding time of sample at that temperature in a differential scanning calorimeter were found to be significant to the formation of slowly digestible heat‐moisture treated starch.     

Modification and properties of African yam bean (Sphenostylis stenocarpa Hochst. Ex A. Rich.) Harms starch I: Heat moisture treatments and annealing

African yam bean (Sphenostylis stenocarpa) starch was subjected to heat moisture treatments at 18% (HMT-18), 21% (HMT-21), 24% (HMT-24), 27% (HMT-27) and excess (Annealing) moisture levels. Proximate chemical composition of the starch samples revealed that the moisture content of the starches ranged between 6.7% and 12.5%. Following modification of the native starch, there was a reduction in the moisture level of the heat moisture treated starches from HMT-18 to HMT-27. However, the annealed starch (HMT-ANN) retained higher moisture content compared to native starch (AYB-Native). The carbohydrate, protein, ash, amylose and fat content reduced with all the forms of heat treatments. At the temperature range studied (60–90 °C), increasing level of heat moisture treatments reduced the solubility and swelling capacity. pH also exert a profound effect both on the solubility and the swelling of the starch. Increasing degree of alkalinity increased both solubility and swelling capacity. In the native and modified starch samples, replacement of the wheat flour by the starch resulted in increased alkaline water retention of the blends. Water absorption capacity of the starch increased with the severity of moisture treatments, while the oil absorption capacity decreased. Apart from HMT-18, there was improved gel forming capacity of all the other heat-modified starches.Pasting temperature increased after hydrothermal modifications, whereas peak viscosity (P_v), Hot Paste Viscosity (H_v), setback and breakdown values all reduced after heat moisture treatments. All the starches were of type-B viscosity.Differential scanning calorimetry studies revealed that heat moisture treatment shifted the onset temperature (T_o), peak temperature(T_p) and conclusion temperature (T_c) to higher values. The gelatinisation temperature of the annealed starch was comparable to native starch. In addition, gelatinisation band of the native starch increased progressively from HMT-18 to HMT-27. Heat moisture treatment reduced the gelatinsation enthalpy (ΔH), while the enthalpy of retrogradation(ΔH_r) increased with the storage time of the gelatinised starch. Retrogradation enthalpy of the heat moisture conditioned starches were lower than the value obtained for the native starch.X-ray diffraction studies of the starch indicated that all the starch samples showed the type-C diffraction pattern. Differences were however observed in their degree of crystallinity. Native starch exhibited the lowest crystallinity (20%) while annealed starch had the highest crystallinity (27%)Microscopy studies revealed surface indentation, formation of groves in the central region, folding of starch granules and formation of doughnut-like appearance in some of the starch samples.     

Effect of debranching and heat‐moisture treatment on the properties of Thai rice flours

High and low amylose Thai rice flours (KC and ML, respectively) were used in this work, to increase the resistant starch (RS) content in the flour. Pullulanase debranching followed by heat‐moisture treatment (DHMT) altered the pasting properties, which increased the shear stability to the flours. The gelatinisation temperature determined by DSC was increased and the more retrogradation occurred in treated flour compared to the native flour. The SEM observation showed that the treatment did not change the morphology of the granules in both flours. The slowly digestible starch (SDS) content in DHMT KC was higher than in the native KC. The RS content in the treated ML flour was increased to 18.31% from 11.59% in native flour. These concluded that the treatment affected the digestibility, while maintaining the granular structure.     

An assessment of changes in thermal and physico-chemical parameters of jack bean (<Emphasis Type="Italic">Canavalia ensiformis</Emphasis>) starch following hydrothermal modifications

Starch isolated from jack bean was modified by heat moisture treatment (HMT) and annealing. Scanning electron micrograph indicates oval and round shape for the starch granules, with heterogeneous sizes. The range of the granule size for the starches was between 10 and 20 μm for the width and 14 and 32 μm for the length. The starches exhibited the characteristic “C” pattern for legume starches with increased starch crystallinity after modifications. Swelling power and solubility reduced following annealing and heat moisture treatment. The results also revealed that water absorption capacity increased following the heat moisture treatment but reduced after starch annealing. Both annealing and heat moisture treatment improved gelation capacity of the native starch. Gelatinization temperature increased after modifications. Both annealing and heat moisture treatments reduced starch retrogradation.     

A Study of Some Physicochemical Properties of High‐Crystalline Tapioca Starch

Tapioca starch was partially hydrolyzed in hydrochloric acid solution at room temperature for various lengths of time to obtain high‐crystalline starches. RVA viscoamylograms of acid‐modified starches demonstrated a very low viscosity as compared to that of native tapioca starch. The relative crystallinity of native and acid‐modified tapioca starches were measured by X‐ray diffraction ranging from 39.53% to 57.75%. The native and acid‐modified tapioca starches were compressed into tablets using various compression forces. The % relative crystallinity of starch increased with the increase in hydrolysis time and the crushing strength of the tablet was also increased in line with the crystallinity while the amylose content decreased when the crystallinity increased. These results suggested that the erosion of amylose might cause the rearrangement of starch structure into a new more tightly packed form, which provided the higher crushing strength for the tablets.     

Wheat starch production,structure, functionality and applications—a review

Starch is the main component of wheat having a number of food and industrial applications. Thousands of cultivars/varieties of different wheat types and species differing in starch functionality (thermal, retrogradation, pasting and nutritional properties) are grown throughout the world. These properties are related to starch composition, morphology and structure, which vary with genetics, agronomic and environmental conditions. Starches from soft wheat contain high amounts of surface lipids and proteins and exhibit lower paste viscosity, whereas that from hard cultivars contain high proportion of small granules and amylose content but lower gelatinization temperature and enthalpy. Waxy starches exhibit higher‐percentage crystallinity, gelatinization temperatures, swelling power, paste viscosities and digestibility, but lower‐setback viscosity, rate of retrogradation and levels of starch lipids and proteins than normal and high‐amylose starches. Starches with high levels of lipids are less susceptible towards gelatinization, swelling and retrogradation and are good source of resistant starch, while that with high proportion of long amylopectin chains are more crystalline, gelatinize at high temperatures, increase paste viscosity, retrograde to a greater extent and decrease starch digestibility (high resistant and slowly digestible starch and low rapidly digestible starch).