Synthesis and anticorrosive properties of electroactive polyimide/SiO2 composites

In this study, a series of electroactive polyimide/SiO₂ (EPIS) composite materials containing conjugated segments of electroactive amino‐capped aniline trimer (AT) unit were successfully prepared. First of all, the amino‐modified silica (AMS) particles of ∼100 nm in diameter were synthesized by performing the conventional base‐catalyzed sol–gel reactions. Subsequently, the AMS nanoparticles were blending into the polymerization reactions between AT and 4,4′‐(4,4′‐isopropylidenediphenoxy)‐bis(phthalic anhydride), leading to the formation of EPIS composites. The as‐prepared EPIS materials in the form of coating on cold‐rolled steel (CRS) electrode were found to be much superior in corrosion protection over those of non‐electroactive polyimide and EPI materials based on a series of electrochemical corrosion measurements in saline. The significant enhancement in corrosion protection of EPIS coatings on CRS electrodes might probably be attributed to the redox catalytic property of organic EPI inducing the formation of passive metal oxide layer and the barrier property of well‐dispersed AMS nanoparticles existed in EPI matrix. POLYM. COMPOS., 35:617–625, 2014. © 2013 Society of Plastics Engineers     

Preparation and properties of polyimide/silica hybrid nanocomposites

In this study, a commercially available nano‐sized silica (SiO₂) was surface‐modified via esterification with oleic acid (OA), a relatively inexpensive and hydrophobic modifier. The surface‐modified silica (SiO₂‐OA) nanoparticles were used to disperse in the poly(amic acid) solutions of a commercial polyimide (PI), used for two‐layer film, and thermally imidized to form a series of PI/silica nanocomposites. The effects of the addition of SiO₂‐OA nanoparticles on the properties of the as‐prepared PI/silica nanocomposites were studied. The results indicated that the as‐prepared PI/silica nanocomposites exhibited improvements in the dynamic mechanical property, thermal stability, water resistance, and thermal expansion. POLYM. COMPOS. 28:575–581, 2007. © 2007 Society of Plastics Engineers     

Preparation and properties of polylactide–silica nanocomposites

Poly(lactic acid) (PLA)/SiO₂ nanocomposites were prepared via melt mixing with a Haake mixing method. To improve the dispersion of nanoparticles and endow compatibility between the polymer matrix and nanosilica, SiO₂ was surface‐modified with oleic acid (OA). The interfacial adhesion of the PLA nanocomposites was characterized by field‐emission scanning electron microscopy. The storage modulus and glass‐transition temperature values of the prepared nanocomposites were measured by dynamic mechanical thermal analysis. The linear and nonlinear dynamic rheological properties of the PLA nanocomposites were measured with a parallel‐plate rheometer. The effects of the filling content on the dispersability of the OA–SiO₂ nanoparticles in the PLA matrix, the interface adhesion, the thermomechanical properties, the rheological properties, and the mechanical properties were investigated. Moreover, the proper representation of the oscillatory viscometry results provided an alternative sensitive method to detect whether aggregation formed in the polymeric nanocomposites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Polyimide‐silica nanocomposites exhibiting low thermal expansion coefficient and water absorption from surface‐modified silica

In this study, a commercially available nano‐sized silica (SiO₂) was surface‐modified via esterification with oleic acid (OA), a relatively inexpensive and hydrophobic modifier, and characterized by FTIR, NMR, SEM, EDS, and TGA measurements. Various amounts of the surface‐modified silica nanoparticles (SiO₂‐OA) were dispersed in a poly(amic acid), which were then cyclized at high temperatures to form a series of PI/SiO₂‐OA nanocomposite films (PISA). The effect of the addition of the SiO₂‐OA nanoparticles on the properties of the as‐prepared polyimide nanocomposite was studied. The results indicated that, comparing with pure PI and PI/pristine‐SiO₂ composite film (PISI), the as‐prepared PISA films had enhanced dynamic mechanical properties and thermal stability, as well as reduced water absorption and thermal expansion. The as‐prepared PI/SiO₂‐OA nanocomposites have potential for applications in high performance microelectronic devices. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104, 4096–4105, 2007     

Tribological properties of bismaleimide composites with surface‐modified SiO2 nanoparticles

In this article, the surface of SiO₂ nanoparticles was modified by silane coupling agent N‐(2‐aminoethyl)‐γ‐aminopropylmethyl dimethoxy silane. The bismaleimide nanocomposites with surface‐modified SiO₂ nanoparticles or unmodified SiO₂ nanoparticles were prepared by the same casting method. The tribological performance of the nanocomposites was studied on an M‐200 friction and wear tester. The results indicated that the addition of SiO₂ nanoparticles could decrease the frictional coefficient and the wear rate of the composites. The nanocomposites with surface‐modified SiO₂ nanoparticles showed better wear resistance and lower frictional coefficient than that with the unmodified nanoparticles SiO₂. The specific wear rate and the steady frictional coefficient of the composite with 1.0 wt % surface‐modified SiO₂ nanoparticles are only 1.8 × 10^?6 mm³/N m and 0.21, respectively. The dispersion of surface‐modified SiO₂ nanoparticles in resin matrix was observed with transmission electron microscope, and the worn surfaces of pure resin matrix and the nanocomposites were observed with scanning electron microscope. The different tribological behavior of the resin matrix and the filled composites should be dependent on their different mechanical properties and wear mechanism. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Enhancement of the electrical properties of poly(p‐phenylene vinylene) by the incorporation of silicon dioxide nanoparticles

The electrical properties of a poly(p‐phenylene vinylene) (PPV) conjugated polymer using silver (Ag) as a cathode were improved by the incorporation of silicon dioxide (SiO₂) nanoparticles. The current density of the Ag–PPV/SiO₂ nanocomposite system was higher than that of Ag–PPV. A lower level of interfacial oxidation was found in the Ag–PPV/SiO₂ nanocomposite than in Ag–PPV, confirming that a more complete elimination of residue occurred in the nanocomposite. This was due to the relatively large surface area of the PPV/SiO₂ nanocomposite film and the hydrophilic surface of the SiO₂ nanoparticles. The lower level of oxidation contributed to an improvement in the material's current–voltage characteristics. Morphology‐dependent current–voltage characteristics were enhanced by a large variation in the thickness of the Ag–PPV/SiO₂ nanocomposite film because an increased effective field strength could be induced in the thinner regions of the film. The incorporation of SiO₂ nanoparticles altered the effective film thickness and the amount of residue in the interior of the PPV without disrupting the structure of the conjugated polymer. The Ag cathode created a stable interface with the PPV film layer without causing the formation of an organic–metal complex, which would have obstructed electron injection. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of hybrid materials based on graphene oxide and silica nanoparticles and their effect on the corrosion protection properties of epoxy resin coatings

This study focuses on the use of tetraethyl orthosilicate (TEOS) as a silica source to decorate the surface of graphene oxide (GO) nanosheets and the use of N-(β-aminoethyl)-γ-aminopropyltrimethoxysilane (Z-6020) as a coupling agent through a one-step in-situ sol-gel process. The results of the Fourier transform infrared spectroscopy (FT-IR), UV-visible, X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA) revealed that fine SiO₂ nanoparticles have successfully been synthesized on the basal plane of GO by covalent bonding. The dispersion of GO sheets and GO–SiO₂ nanohybrids within the epoxy matrix was studied using XRD and SEM techniques. Then, the effect of incorporating 0.1?wt% GO sheets and GO–SiO₂ nanohybrids on the corrosion protection and barrier performance of the epoxy coating was also investigated. The results showed that the incorporation of GO–SiO₂ into the epoxy matrix improved its thermal stability. The electrochemical impedance spectroscopy (EIS) test, potentiodynamic polarization and cathodic disbonding test showed that the corrosion protection performance was significantly enhanced by the incorporation of GO–SiO₂ hybrids into the epoxy resin compared to epoxy/GO and neat epoxy resin, respectively. The water contact angle (CA) results confirmed the reduction of the hydrophobic nature of the surface after the incorporation of GO–SiO₂ hybrids.     

Performance of EP/PpPDA and EP/PpPDA/SiO2 nanocomposite on corrosion inhibition of steel in hydrochloric acid solution

Epoxy-poly p-phenylendiamine (EP/PpPDA) and its nanocomposite with SiO₂ nanoparticles (EP/PpPDA/SiO₂) were synthesized and tested as potential corrosion inhibitors of steel in 1 M HCl solution. Performance of EP/PpPDA/SiO₂ and EP/PpPDA coatings on protection of steel against corrosion was investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and Atomic force microscopy (AFM) and at various temperatures between 298 and 328 K. Changes in the coating resistance and charge-transfer resistance with temperature were analyzed to determine the activation energies of the processes involved. The determined values of activation energy showed that the EP/PpPDA/SiO₂ coating has better anti-corrosion effect than EP/PpPDA. The thermodynamic functions of dissolution processes were also calculated and discussed. The results from AFM observations indicated that the presence of SiO₂ nanoparticles increased the roughness of Epoxy-poly p-phenylendiamine/SiO₂ nanocomposite (EP/PpPDA/SiO₂). It was finally concluded that the presence of silica nanoparticles enhance the protection properties of EP/PpPDA coating as a novel potential corrosion inhibitor for steel.     

High‐frequency dielectric characterization for liquid crystalline polyimide/SiO2 nanocomposites

In this study, we investigated the influence of frequency, film thickness, and SiO₂ content on the dielectric constant (K) and loss tangent (tan δ) of liquid crystalline polyimide (LCPi) and liquid crystalline polyimide/SiO₂ (LCPi/SiO₂) nanocomposites in a high frequency environment. We tested the loss tangent of the LCPi and LCPi/SiO₂ nanocomposites within the high frequency 1 MHz to 3 GHz range, and determined its value to be between 0.01 and 0.001. In addition, we found a formant for frequencies ranging from 0.5 GHz to 1 GHz. We also inferred from the dielectric loss graphs of films with different thicknesses that the formants of the loss tangent shifted toward higher frequencies with increasing thicknesses. When measuring the dielectric constant at high frequencies, we found that the dielectric constant decreased markedly with increased SiO₂ contents. Using the dielectric constant of high‐frequency circuit board materials as the standard, the dielectric constant of the LCPi/SiO₂ nanocomposites at the frequency range from 1 MHz to 3 GHz was found to be as high as 2.2–3.4, thereby confirming the viability of LCPi/SiO₂ nanocomposites as candidate materials for high‐frequency circuit board. In addition, the volume resistivity (ρ_V) of the LCPi and LCPi/SiO₂ nanocomposites also increased with increased SiO₂ contents. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of polyimide/silica‐barium titanate nanocomposites

The silica‐barium titanate (SiO₂‐BaTiO₃) nanocomposites coated with polyimide had been synthesized successfully by a dispersion polymerization method. The conformation, structure, and size of SiO₂‐BaTiO₃ nanocomposites coated with polyimide were investigated by using FT‐IR, EDAX, XRD,TEM, SEM, and TGA. The results indicate that there is a thin layer polymer of SiO₂‐BaTiO₃ nanocomposites surface, in which the polymer thickness is about 10 nm and the size of them are about 50–60 nm, and the particles are well‐dispersed with even particle size. In addition, the crystal structure of BaTiO₃ is stable in preparing composite process and the chemical bond is formed between the inorganic phase and the polymer matrix. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Synthesis and characterization of novel polyimide/SiO2 nanocomposite materials containing phenylphosphine oxide via sol‐gel technique

In this article, a series of novel polyimide/silica (PI/SiO₂) nanocomposite coating materials were prepared from tetraethoxysilane (TEOS), γ‐glycidyloxypropyltrimethoxysilane (GOTMS), and polyamic acid (PAA) via sol‐gel technique. PAA was prepared by the reaction of 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) and bis (3‐aminophenyl) phenyphosphine oxide (BAPPO) in N‐methyl‐2‐ pyrrolidone (NMP). BAPPO was synthesized hydrogenation of bis (3‐nitrophenyl) phenyphosphine oxide (BNPPO) in the presence of Pd/C. The silica content in the hybrid coating materials was varied from 0 to 20 wt %. The molecular structures of the composite materials were analyzed by means of FT‐IR and ²⁹Si‐NMR spectroscopy techniques. The physical and mechanical properties of the nanocomposites were evaluated by various techniques such as, hardness, contact angle, and optical transmission and tensile tests. These measurements revealed that all the properties of the nanocomposite coatings were improved noticeable, by the addition of sol‐gel precursor into the coating formulation. Thermogravimetric analysis showed that the incorporation of sol‐gel precursor into the polyimide matrix leads to an enhancement in the thermal stability and also flame resistance properties of the coating material. The surface morphology of the hybrid coating was characterized by scanning electron microscopy (SEM). SEM studies indicated that nanometer‐scaled inorganic particles were homogenously dispersed throughout the polyimide matrix © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and properties of polyimide–clay nanocomposite materials for anticorrosion application

A series of polymer–clay nanocomposite (PCN) materials that consist of organosoluble polyimide and layered montmorillonite clay were prepared by the solution dispersion technique. The organosoluble polyimide containing non‐coplanar moiety in diamine monomer and flexible bridging linkages in dianhydride monomer was synthesized by chemical imidization. The as‐synthesized PCN materials were characterized by infrared spectroscopy, wide‐angle powder X‐ray diffraction, and transmission electron microscopy. The organosoluble polyimide showed better corrosion resistance compared to polyaniline, poly(o‐ethoxyaniline) and poly(methyl methacrylate) by using a series of standard electrochemical corrosion measurements of corrosion potential, polarization resistance, and corrosion current in 5 wt % aqueous NaCl electrolyte. Polyimide–clay nanocomposite materials incorporated with low loading of clay were found to further improve corrosion inhibition over pure polyimide. Effects of the material composition on the O₂/H₂O molecular permeability, optical clarity, and thermal properties of polyimide–clay nanocomposite materials were studied by molecular permeability analysis, UV–visible transmission spectra, thermogravimetric analysis, and differential scanning calorimetry, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3573–3582, 2004     

Electrochemical investigations on the corrosion protection effect of poly(vinyl carbazole)‐silica hybrid sol–gel materials

A series of sol–gel derived organic–inorganic hybrid coatings consisting of organic poly (vinyl carbazole) (PVK) and inorganic silica (SiO₂), with 3‐(trimethoxysilyl)propyl methacrylate (MSMA) as coupling agent, were successfully synthesized. First of all, vinyl carbazole (VCz) monomers are copolymerized with MSMA by performing free‐radical polymerization reactions with AIBN as initiator. Subsequently, as‐prepared copolymer (i.e., sol–gel precursor) was further reacted with various feeding content of tetraethyl orthosilicate (TEOS) through organic acid (CSA)‐catalyzed sol–gel reaction to form a series of PVK‐silica hybrid (PSH) sol–gel materials. The as‐synthesized hybrid materials were subsequently characterized by Fourier‐Transformation infrared (FTIR) spectroscopy and solid‐state ²⁹Si NMR. It should be noted that the PVK‐SiO₂ hybrid (PSH) coating on cold‐rolled steel (CRS) electrode with low silica loading (e.g., 10 phr) was found to be superior in anticorrosion property over those of neat PVK based on a series of electrochemical measurements such as corrosion potential, polarization resistance, corrosion current, and electrochemical impedance spectroscopy in 3.5 wt% NaCl electrolyte. The better anticorrosion performance of PSH coatings as compared to that of neat polymer may probably be attributed to the stronger adhesion strength of PSH coatings on CRS electrode, which was further evidenced by Scotch tape test evaluation. Increase of adhesion strength of PSH coatings on CRS electrode may be associated with the formation of Fe–O–Si covalent bonds at the interface of PSH coating and CRS electrode based on the FTIR–RAS (reflection absorption spectroscopy) studies. POLYM. COMPOS., 2012. © 2011 Society of Plastics Engineers     

Development of poly(vinylcarbazole)/alumina nanocomposite coatings for corrosion protection of 316L stainless steel in 3.5% NaCl medium

Poly(vinylcarbazole) (PVK) and PVK‐alumina (Al₂O₃) nanocomposite coatings were electrochemically coated on 316 L stainless steel (SS) substrates for corrosion protection of 316 L SS in 3.5 weight (wt) % NaCl medium. The formation of PVK and incorporation of nanoalumina particles in PVK‐Al₂O₃ nanocomposite coatings were confirmed from attenuated total reflectance‐infrared spectroscopy (ATR‐IR). Thermal analysis (TG) results showed enhanced thermal stability for the composites relative to PVK. Incorporation of Al₂O₃ nanoparticles enhanced the micro hardness of PVK coated 316 L SS. The dispersion of alumina nanoparticles was examined via scanning electron microscope (SEM) and tunneling electron microscopy (TEM) and revealed distinct features. The influence of nanoparticles on the barrier properties of PVK and PVK‐Al₂O₃ nanocomposites was evaluated in aqueous 3.5 wt % NaCl by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) studies. The results proved that PVK nanocomposite coatings provided better protection for 316 L SS than PVK coatings. The drastic increase in impedance values is due to the high corrosion resistance offered by the PVK nanocomposite coatings that arises due to the interaction between Al₂O₃ nanoparticles and PVK. The highest corrosion protection shown by the 2 wt % nano Al₂O₃ incorporated PVK composite coatings proved enhanced corrosion resistance compared to PVK. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44937.     

In situ sol–gel route to novel sulfonated polyimide?SiO2 hybrid proton‐exchange membranes for direct methanol fuel cells

Polyimides (PIs) as high‐performance organic matrices are used in the preparation of PI composites because of their excellent mechanical, thermal and dielectric properties. The sol–gel method is a promising technique for preparing these PI composites due to the mild reaction conditions and the process being controllable. Although sulfonated polyimide (SPI) proton‐exchange membranes have attracted much attention recently, studies on preparing SPI‐based hybrid proton‐exchange membranes for fuel cells have been rare. A series of SPI? SiO₂ hybrid proton‐exchange membranes were prepared from amino‐terminated SPI pre‐polymers, 3‐glycidoxypropyltrimethoxysilane (KH‐560) and tetraethylorthosilicate through a co‐hydrolysis and condensation process using an in situ sol–gel method. The reactive silane KH‐560 was used to react with amino‐terminated SPI to form silane‐capped SPI in order to improve the compatibility between the polymer matrix and the inorganic SiO₂ phase. The microstructure and mechanical, thermal and proton conduction properties were studied in detail. The hybrid membranes were highly uniform without phase separation up to 30 wt% SiO₂. The storage modulus and tensile strength of the hybrid membranes increased with increasing SiO₂ content. The introduction of SiO₂ improved the methanol resistance while retaining good proton conductivity. The hybrid membrane with 30 wt% SiO₂ exhibited a proton conductivity of 10.57 mS cm^?1 at 80 °C and methanol permeability of 2.3 × 10^?6 cm² s^?1 possibly because the crosslinking structure and SiO₂ phases formed in the hybrids could retain water and were helpful to proton transport. Copyright © 2010 Society of Chemical Industry     

Silica/polystyrene and silica/polystyrene‐b‐polymethacryloxypropyltrimethoxysilane hybrid nanoparticles via surface‐initiated ATRP and comparison of their wettabilities

Both silica/polystyrene (SiO₂/PS) and silica/polystyrene‐b‐polymethacryloxypropyltrimethoxysilane (SiO₂/PS‐b‐PMPTS) hybrid nanoparticles were synthesized via surface‐initiated atom transfer radical polymerization (SI‐ATRP) from SiO₂ nanoparticles. The growths of all polymers via ATRP from the SiO₂ surfaces were well controlled as demonstrated by the macromolecular characteristics of the grafted chains. Their wettabilities were measured and compared by water contact angle (WCA) and surface roughness. The results show that the nanoparticles possess hydrophobic surface properties. The static WCA of SiO₂/PS‐b‐PMPTS hybrid nanoparticles is smaller than that of SiO₂/PS hybrid nanoparticles, meanwhile, the surface roughness of SiO₂/PS‐b‐PMPTS hybrid nanoparticles is yet slightly rougher than that of SiO₂/PS hybrid nanoparticles, which shows that the combination and competition of surface chemistry and roughness of a solid material can finally determine its wettability. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Synthesis and physicochemical investigation of imide-functionalized silica nanocomposites

The incorporation of inorganic nanoparticles into polymers have gained significant attention to improving functional properties. The ultimate nanocomposite behaviors are influenced by many parameters, such as microstructural distribution that are produced during the treatment process. Herein, a hybrid material integrating a modified network into a polyimide PI matrix was produced via the sol–gel method by the reaction of pyromellitic dianhydride, 4, 4-oxydianaline, and 1, 5-diaminonaphthalene to synthesize copolyimides nanocomposite. The modified polyimide and unmodified polyimide silica (SiO₂) nanoparticles were incorporated in the polyimide matrix to have polyimide silica nanocomposite. In modified silica nanoparticles, 3-aminopropyltriethosilane was introduced to have better compatibility among inorganic–organic hybrid with similar chemical contact due to their flexible alkyl group. The surface morphology or structure of silica and polyimide was affirmed by scanning electron microscopy, Fourier transforms infrared spectroscopy confirmed the synthesis of pure polyimide, unmodified polyimide, and modified polyimide silica via presence and absence of certain peaks. Thermogravimetric analysis (TGA) results showed high thermal stability of nanocomposites as silica content increases. In contrast to unmodified silica, the modified silica provides more thermal stability to the nanocomposites. Dynamic mechanical analysis was used to investigate the tensile stress of pure polyimide, unmodified, and modified silica nanocomposites. Thermal stability, storage modulus, and moisture absorption of these hybrid materials were improved with silica nanoparticles. The TG mass spectrum confirms the successful synthesis of modified silica networks. The substituted silica nanoparticles show higher mechanical toughness and storage in modified compared to unmodified silica nanocomposite, which exhibits stronger binding attraction between silica nanoparticles and polyimide matrix.     

Advanced anticorrosive coatings prepared from electroactive polyimide-TiO2 hybrid nanocomposite materials

In this study, we present the first preparation and corrosion protection studies of a series of electroactive polyimide-TiO₂ (EPTs) hybrid nanocomposite materials containing conjugated segments of electroactive amino-capped aniline trimer (ATs) and TiO₂ nanoparticles of ∼10 nm in diameter. Redox behavior of as-prepared EPTs hybrid materials was identified by electrochemical cyclic voltammetry (CV) studies. Higher concentration of TiO₂ component in as-prepare corresponding EPTs was found to reveal better corrosion protection effect on cold-rolled steel (CRS) electrode based on sequential electrochemical corrosion measurements in 5 wt.% NaCl electrolyte. Enhancement of corrosion protection of EPTs coatings on CRS electrode could be interpreted by following three possible reasons: (1) Electroactive polyimide (EPI) could act as a physical barrier coating. (2) The redox catalytic capabilities of ATs units existed in EPTs may induce the formation of passive metal oxide layers on CRS electrode. (3) The well-dispersed TiO₂ nanoparticles in EPTs matrix could act as effective hinder to enhance the oxygen barrier property of EPTs.     

Preparation and properties of nylon 6/carboxylic silica nanocomposites via in situ polymerization

Nylon 6/carboxylic acid‐functionalized silica nanoparticles (SiO₂‐COOH) nanocomposites were prepared by in situ polymerization of caprolactam in the presence of SiO₂‐COOH. The aim of this work was to study the effect of carboxylic silica on the properties of the nylon 6 through the interfacial interactions between the SiO₂‐COOH nanoparticles and the nylon 6 matrix. For comparison, pure nylon 6, nylon 6/SiO₂ (unmodified) and nylon 6/amino‐functionalized SiO₂ (SiO₂‐NH₂) were also prepared via the same method. Fourier transform infrared spectrometer (FTIR) spectroscopy was used to evaluate the structure of SiO₂‐COOH and nylon 6/SiO₂‐COOH. The results from thermal gravimetric analysis (TGA) indicated that decomposition temperatures of nylon 6/SiO₂‐COOH nanocomposites at the 5 wt % of the total weight loss were higher than the pure nylon 6. Differential scanning calorimeter (DSC) studies showed that the melting point (T_m) and degree of crystallinity (X_c) of nylon 6/SiO₂‐COOH were lower than the pure nylon 6. Mechanical properties results of the nanocomposites showed that nylon 6 with incorporation of SiO₂‐COOH had better mechanical properties than that of pure nylon 6, nylon 6/SiO₂, and nylon 6/SiO₂‐NH₂. The morphology of SiO₂, SiO₂‐NH₂, and SiO₂‐COOH nanoparticles in nylon 6 matrix was observed using SEM measurements. The results revealed that the dispersion of SiO₂‐COOH nanoparticles in nylon 6 matrix was better than SiO₂ and SiO₂‐NH₂ nanoparticles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Investigation of optical and thermally stimulated properties of SiO2 nanoparticles‐filled polycarbonate

Polycarbonate nanocomposite containing silicon oxide nanoparticles average size of 5 nm at different weight ratio has been prepared by solution mixing method. The dispersion of nanoparticles in polymer matrix was studied by transmission electron microscopy (TEM). The optical and thermally stimulated behavior of nanocomposites were analyzed by energy dispersive X‐ray spectra (EDX), X‐ray diffraction pattern (XRD), UV–vis spectroscopy, differential scanning calorimetry (DSC), and thermally stimulated discharge current (TSDC). TEM images show the dispersion and size of the nanoparticles, however, EDX indicate the presence of SiO₂ on the surface of the nanocomposite film. An XRD result reveals that the crystallinity increases with increase in concentration of SiO₂ nanoparticles in polymer matrix. The direct and indirect optical energy band gaps decreased and number of carbon atom increased with concentration of SiO₂ nanoparticles. We have observed that the increase of SiO₂ nanoparticles in PC significantly reduces the refractive index. DSC and TSDC show that glass transition temperature increases according to SiO₂ weight ratio. The TSDC of nanocomposites samples could be understand in terms of non‐Debye theory of charge relaxation and co‐tunneling mechanism of charge transport. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012