Synthesis,characterization and swelling behaviors of hydroxyethyl cellulose‐g‐poly(acrylic acid)/attapulgite superabsorbent composite

In this work, a series of novel hydroxyethyl cellulose‐ g‐poly(acrylic acid)/attapulgite (HEC‐g‐PAA/APT) superabsorbent composites were prepared through the graft polymerization of hydroxyethyl cellulose (HEC), partially neutralized acrylic acid (AA), and attapulgite (APT) in aqueous solution, and the composites were characterized by means of Fourier‐transform spectroscopy, scanning electron microscopy, and transmission electronmicroscopy. The effects of polymerization variables including concentrations of the initiator and crosslinker and APT content on water absorbency were studied, and the swelling properties in various pH solutions as well as the swelling kinetics in various saline solutions were also systematically evaluated. Results showed that the introduction of 5 wt% APT into HEC‐g‐PAA polymeric network could improve both water absorbency and water absorption rate of the superabsorbent composites. In addition, the superabsorbent composites retained high water absorbency over a wide pH range of 4–10, and the swelling kinetics of the superabsorbent composites in CaCl₂ and FeCl₃ solutions exhibited a remarkable overshooting phenomenon. POLYM. ENG. SCI., 2010. © 2010 Society of Plastics Engineers     

Study on superabsorbent composites. XXI. Synthesis,characterization and swelling behaviors of chitosan‐g‐poly(acrylic acid)/organo‐rectorite nanocomposite superabsorbents

A novel chitosan‐g‐poly(acrylic acid)/organo‐rectorite (CTS‐g‐PAA/OREC) nanocomposite superabsorbent was synthesized by aqueous polymerization using N, N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. Rectorite was organified with four different degree of hexadecyltrimethyl ammonium bromide, and the organification of rectorite was proved by FTIR and XRD. The effect of organification degree of rectorite on water absorbency of CTS‐g‐PAA/OREC with different organo‐rectorite content was investigated. The swelling behaviors in distilled water and various pH solutions were also studied. The results from IR spectroscopy and XRD data show that acrylic acid had been grafted polymerization with chitosan and organo‐rectorite and formed nanocomposite. Introducing organo‐rectorite into the CTS‐g‐PAA polymeric network can improved water absorbency and swelling rate of CTS‐g‐PAA/OREC. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Study on superabsorbent composite. XI. Effect of thermal treatment and acid activation of attapulgite on water absorbency of poly(acrylic acid)/attapulgite superabsorbent composite

The effect of acid activation and thermal treatment of attapulgite on water absorbency of superabsorbent composite were investigated. Under the same preparation conditions, superabsorbent composite prepared with natural attapulgite exhibited a water absorbency of 639 g/g and it merely kept 71% of its initial water absorbency after 5 times of swelling–deswelling–reswelling test. However, superabsorbent composites prepared with 2–10 M hydrochloric acid acidified attapulgite and 100–400°C thermal treated attapulgite respectively exhibited the water absorbency of 884–1,241 g/g and 701–1,515 g/g. Also, those superabsorbent composites can keep 87% and 85% of their initial water absorbency after 5 times of swelling–deswelling–reswelling test, respectively. These results showed that, compared with superabsorbent composite prepared with natural attapulgite, the comprehensive water‐absorbing properties of poly(acrylic acid)/ attapulgite superabsorbent composites were improved effectively by acid activation and thermal treatment of attapulgite. This improvement of water absorbencies and gel strength of superabsorbent composite may be due to synthetical factors such as changes in the crystalline structure and the specific surface area and improvement of the number and the activity of hydroxyl groups of attapulgite, which in turn influence the grafting efficiency of monomer, crosslinking density, and the structure of superabsorbent composite network. POLYM. COMPOS., 28:397–404, 2007. © 2007 Society of Plastics Engineers     

壳聚糖接枝聚丙烯酸钠/高岭土复合树脂的吸水性能

利用溶液聚合法制备了壳聚糖接枝聚丙烯酸钠/高岭土复合树脂,研究了复合树脂在蒸馏水中的吸水速率、重复吸水性能和人工尿液中的吸水倍率,以及在不同温度、不同电解质溶液离子强度和不同pH值的环境下复合树脂的吸水性能。结果表明,复合树脂的吸水速率较慢,在多次重复吸水后吸水性能也逐渐降低,在人工尿液中的吸水倍率高于聚丙烯酸钠树脂,低于壳聚糖接枝丙烯酸钠树脂;随着温度的升高,复合树脂的吸水能力增强,超过50℃后变化较小;树脂的吸液倍率随着电解质溶液浓度和价态的增大而下降;随着pH值的增大而出现驼峰,在pH=3.5和pH=8.5处分别出现吸液倍率最大值。     

Influence of the COOH and COONa groups and crosslink density of poly(acrylic acid)/montmorillonite superabsorbent composite on water absorbency

A novel poly(acrylic acid)/montmorillonite superabsorbent composite with a water absorbency of 1100 times its own weight was synthesized by the graft copolymerization of acrylic acid with a cross‐linking agent in the presence of montmorillonite ultrafine powder. The influence of the amount of crosslinker and montmorillonite on water absorbency has been investigated. It was found that a crosslinker concentration of 0.03 wt% and 30 wt% montmorillonite gave the best results. The collaborative absorbent effect of sodium carboxylate and carboxylic acid groups was superior to that of sodium carboxylate or carboxylic acid groups alone, and the composite with a ratio of about 2/3 for sodium carboxylate to carboxyl acid groups possessed the highest water absorbence. © 2001 Society of Chemical Industry     

Preparation of chitosan‐g‐poly(acrylamide)/montmorillonite superabsorbent polymer composites: Studies on swelling,thermal, and antibacterial properties

Superabsorbent composites based on chitosan‐g‐poly(acrylamide) and montorillonite (CTS‐g‐PAAm/MMT) were synthesized through in situ radical polymerization by grafting of crosslinked acrylamide onto chitosan backbone in presence of MMT at different contents. The formation of the grafted network was confirmed by attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetery (DSC). The obtained porous structure was observed by scanning electron microscope (SEM). The presence of clay and its interaction with chitosan‐g‐poly(acrylamide) (CTS‐g‐PAAm) matrix was evidenced by ATR‐FTIR analysis. The morphology was investigated by both X‐ray diffraction (XRD) and SEM analyses. It was suggested the formation of mostly exfoliated structures with more porous structures. Besides, the thermal stability of these composites, observed by TGA analysis, was slightly affected by the clay loading as compared to the matrix. These hydrogel composites were also hydrolyzed to achieve anionic hydrogels with ampholytic properties. Swelling behaviors were examined in doubly distilled water, 0.9 wt % NaCl solution and buffer solutions. The water absorbency of all superabsorbent composites was enhanced by adding clay, where the maximum was reached at 5 wt % of MMT. Their hydrolysis has not only greatly optimized their absorption capacity but also improved their swelling rate and salt‐resistant ability. The hydrolyzed superabsorbent showed better pH‐sensitivity than the unhydrolyzed counterparts. The results of the antibacterial activity of these superabsorbents composites against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), assayed by the inhibitory zone tests, have showed moderate inhibition of the bacteria growth. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39747.     

Preparation and water absorbency of a novel poly(acrylate‐co‐acrylamide)/vermiculite superabsorbent composite

A novel poly(acrylate‐co‐acrylamide)/expanded vermiculite (EVMT) superabsorbent composite was synthesized by aqueous solution polymerization method. The water absorbency of the superabsorbent composite still reaches 850 g/g when 50 wt % EVMT is added, which is significant in decreasing the production cost of the superabsorbent composites. By controlling the molar ratio of acrylic acid monomer and acrylamide monomer, and neutralization degree of acrylic acid, the hydrophilic groups on the composite can be adjusted, and it is found that the collaborative absorbent effect of ? CONH₂, ? COOK, and ? COOH groups is superior to that of single ? CONH₂, ? COOK, or ? COOH group. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 735–739, 2007     

Hydroxyethyl chitosan‐g‐poly(acrylic acid‐co‐sodium acrylate) superabsorbent polymers

A novel hydroxyethyl chitosan‐g‐poly(acrylic acid‐co‐Sodium Acrylate) (HECTS‐g‐(PAA‐co‐PSA)) superabsorbent polymer was prepared through graft copolymerization of acrylic acid and sodium acrylate onto the chain of hydroxyethyl chitosan. The structure of the polymer was characterized by FTIR. By studying the water absorption of the polymer synthesized under different conditions, the optimal conditions for synthesizing the polymer with the highest swelling ratio was defined. This superabsorbent polymer was further treated by the solvent precipitation method and by the freeze‐drying method. We found that the water absorption rate of the treated polymer was greatly increased and the microstructure of the treated polymer was changed from small pores to loose macro pores. The swelling processes of the polymers before and after modification fit first‐order dynamic processes. The amount of the residual acrylic acid was greatly decreased after treatments. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Superabsorbent composite. XIII. Effects of Al3+‐attapulgite on hydrogel strength and swelling behaviors of poly(acrylic acid)/Al3+‐attapulgite superabsorbent composites

Al³⁺‐attapulgite (Al³⁺‐APT) was prepared by treating attapulgite (APT) with AlCl₃ aqueous solution of various concentrations. The poly(acrylic acid)/Al³⁺‐attapulgite (PAA/Al³⁺‐APT) superabsorbent composite was prepared by reaction of partly neutralized acrylic acid, and Al³⁺‐APT in aqueous solution using N, N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. The surface morphology of the composite was investigated by SEM, and the Al³⁺‐APT composite generated a relatively planar surface comparing the nature APT. The effects of Al³⁺‐APT on hydrogel strength and swelling behaviors, such as equilibrium water absorbency, swelling rate, and reswelling capability, of the superabsorbent composites were also studied. The hydrogel strength and reswelling capability were improved, however, the equilibrium water absorbency and swelling rate decreased with increasing AlCl₃ solution concentration. The equilibrium water absorbency firstly increased, and then decreased with increasing Al³⁺‐APT content. The results indicate that Al³⁺‐APT acts as an assistant crosslinker in the polymeric network, which has great influences on hydrogel strength and swelling behaviors of the PAA/Al³⁺‐APT superabsorbent composites. POLYM. ENG. SCI., 47:619–624, 2007. © 2007 Society of Plastics Engineers.     

Salep‐g‐poly(sodium acrylate)/alumina superabsorbent hydrogel composite as a smart material: Irradiation synthesis and investigation of its swelling behavior

A novel environmentally sensitive superabsorbent composite was synthesized via the gamma (γ)‐irradiation graft copolymerization of sodium acrylate onto a homogeneous blend of natural salep and alumina in an aqueous medium. The reaction parameters (i.e., acrylic acid amount, neutralization percentage, alumina/salep weight ratio, and γ‐irradiation total dose) affecting the water absorbency of the hydrogel composite were optimized by using a systematic method in order to achieve a composite with as high a swelling capacity as possible. FTIR spectroscopy was used to confirm the structure of the final product. Morphology of the synthesized composite was examined by scanning electron microscopy. The swelling behavior of the optimum superabsorbent composite was measured in various environments, and the results showed excellent on–off switching behaviors which made this novel smart composite material a nominee that can potentially be used in agriculture, pharmaceutics, and biosensors. J. VINYL ADDIT. TECHNOL., 2011. © 2011 Society of Plastics Engineers     

Synthesis,characterization, and swelling behavior of alginate‐g‐poly(sodium acrylate)/kaolin superabsorbent hydrogel composites

A novel superabsorbent composite based on sodium alginate and the inorganic clay kaolin was synthesized via the graft copolymerization of acrylic acid (AA) in an aqueous medium with methylene bisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. The effects of reaction variables, such as the MBA, AA, and APS concentrations and the alginate/kaolin weight ratio, on the water absorbency of the composite were systematically optimized. Evidence of grafting and kaolin interactions was obtained by a comparison of the Fourier transform infrared spectra of the initial substrates with that of the superabsorbent composite, and the hydrogel structure was confirmed with scanning electron microscopy. The results indicated that with an increasing alginate/kaolin weight ratio, the swelling capacity and gel content increased. The effects of various salt media were also studied, along with the swelling kinetics. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis and properties of chitosan‐modified poly(acrylic acid)

Potassium persulfate (K₂S₂O₈) was used to initiate the polymerization of acrylic acid (AA) monomer in a chitosan (CS) solution. Both a poly(acrylic acid) (PAA) homopolymer and a CS‐co‐PAA copolymer were produced. When the amount of AA was increased from 5 to 40 g with 5 g of CS, the total monomer conversion was found to increase from 89 to 98% after 2 h of reaction at 70°C. In addition, the percentage of reacted AA monomer being converted to the CS‐co‐PAA copolymer (copolymerization efficiency) and the weight composition of the PAA portion in the copolymer (copolymer composition) both increased with the amount of AA added. The structures and properties of the synthesized CS‐modified PAA polymers were studied. In Fourier transform infrared spectra, the formation of a polyelectrolyte complex between CS chains and PAA chains could be observed. From the thermograms obtained via differential scanning calorimetry, we found that the presence of rigid CS chains increased the glass‐transition temperature of PAA. Thermogravimetric analysis revealed three stages of degradation of the synthesized CS‐modified PAA polymers. The swelling ratio of the CS‐modified PAA polymers depended on the pH value and had a maximum value in a buffer solution at pH 7. This was due to the changes in the morphological structure with the pH value. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and characterization of poly(acrylic acid)/pillared clay superabsorbent composite

Pillared clay-based superabsorbents (PILC-SA) were synthesized by using Al pillared-montmorillonite K10 and KSF via graft copolymerization reaction of acrylic acid (AA). Swelling behavior of pillared clay-based superabsorbent films in distilled water and at different pH values were investigated at room temperature. It was also obtained that Al-KSF and Al-K10 based superabsorbents were pH dependent and showed a reversible swelling behavior. Water absorbency of Al-KSF based superabsorbent was higher than that of Al-K10 based one. SEM, FTIR, and XRD analysis were conducted for further characterization of the PILC-SA. FTIR analyses lead to ester formation between PILC and SA. XRD revealed the basal spacing of the pillared clays before and after in situ incorporation indicating that the morphology of the superabsorbent was exfoliated and the layers of clay dispersed on the composite.     

Preparation and swelling properties of semi‐IPN hydrogels based on chitosan‐g‐poly(acrylic acid) and phosphorylated polyvinyl alcohol

The phosphorylated poly(vinyl alcohol) (P‐PVA) samples with various substitution degrees were prepared through the esterification reaction of PVA and phosphoric acid. By using chitosan (CTS), acrylic acid (AA) and P‐PVA as raw materials, ammonium persulphate (APS) as an initiator and N,N‐methylenebisacrylamide as a crosslinker, the CTS‐g‐PAA/P‐PVA semi‐interpenetrated polymer network (IPN) ssuperabsorbent hydrogel was prepared in aqueous solution by the graft copolymerization of CTS and AA and followed by an interpenetrating and crosslinking of P‐PVA chains. The hydrogel was characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC) techniques, and the influence of reaction variables, such as the substitution degree and content of P‐PVA on water absorbency were also investigated. FTIR and DSC results confirmed that PAA had been grafted onto CTS backbone and revealed the existence of phase separation and the formation of semi‐IPN network structure. SEM observations indicate that the incorporation of P‐PVA induced highly porous structure, and P‐PVA was uniformly dispersed in the polymeric network. Swelling results showed that CTS‐g‐PAA/P‐PVA semi‐IPN superabsorbent hydrogel exhibited improved swelling capability (421 g·g^?1 in distilled water and 55 g·g^?1 in 0.9 wt % NaCl solution) and swelling rate compared with CTS‐g‐PAA/PVA hydrogel (301 g·g^?1 in distilled water and 47 g·g^?1 in 0.9 wt % NaCl solution) due to the phosphorylation of PVA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and swelling characteristics of a pH‐responsive guar gum‐g‐poly(sodium acrylate)/medicinal stone superabsorbent composite

A series of pH‐responsive superabsorbent composites were synthesized by the free‐radical grafting copolymerization of natural guar gum (GG), partially neutralized acrylic acid (NaA), and medicinal stone (MS) using ammonium persulfate (APS) as the initiator and N,N′‐methylene‐bis‐acrylamide (MBA) as the crosslinker. The structure, surface morphologies, and thermal stability of the developed composites were characterized by FTIR spectra, SEM, and TGA techniques, respectively. The effects of various saline, surfactant, and dye solutions on swelling properties were investigated, and the pH‐responsivity was also evaluated. Results indicated that NaA had been grafted onto GG macromolecular chains and MS participated in the polymerization reaction. The incorporation of MS obviously improved the surface structure, thermal stability, water absorption capacity, and rate. Multivalent saline, cationic surfactant, and dye showed more remarkable effect on the water absorption than did monovalent or anionic ones. The composites showed excellent responsive properties and reversible On–Off switching characteristics in various pH buffer solutions, which provided great possibility to extend the application domain of the superabsorbent composites. POLYM. COMPOS., 2011. © 2010 Society of Plastics Engineers     

Study on superabsorbent composite XXV. Synthesis,characterization, and swelling behaviors of poly(acrylic acid‐co‐N‐acryloylmorpholine)/attapulgite superabsorbent composites

In this work, a novel poly(acrylic acid‐co‐N‐acryloylmorpholine)/attapulgite superabsorbent composite was prepared by graft copolymerization among acrylic acid, N‐acryloylmorpholine and attapulgite in aqueous solution, using N,N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. The result from FTIR spectra showed that  OH of attapulgite participated in graft copolymerization with acrylic acid and N‐acryloylmorpholine. Proper monomer ratio and atapulgite content could form a loose surface, and improve reswelling ability and initial swelling rate. The buffer action of the  COOH and  COO⁻ groups in the superabsorbent composite keeps the water absorbency a rough constant in the pH range of 4.4–9.6. Both polarity and structure of an organic solvent are responsible for the phase transition point of the superabsorbent composite. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

瓜尔胶-g-聚(丙烯酸钠-co-苯乙烯)/海泡石复合高吸水性树脂的制备及溶胀行为

以瓜尔胶(GG)、部分中和丙烯酸(NaA)、苯乙烯(St)和海泡石(ST)为原料, 过硫酸铵(APS)为引发剂, N,N′-亚甲基双丙烯酰胺(MBA)为交联剂, 在水溶液中通过接枝共聚反应合成了瓜尔胶-g-聚(丙烯酸钠-co-相似文献   

Synthesis and swelling behaviour of poly (sodium acrylate)/sepiolite superabsorbent composites and nanocomposites

A series of novel composites and nanocomposites xerogels based on acrylic acid, sepiolite and N,N′‐methylenebisacrylamide were prepared using a solution polymerization technique at 70 °C. The quality of dispersion of the micronized sepiolite in the monomer is the crucial point for obtaining nanocomposites. A good dispersion explains the improvement of the absorbent properties of the nanocomposites with respect to the composites. This work investigates not only the influence of the mixing procedure on the swelling behaviour, but also the effect of the amount of clay on the absorbency of these hydrogels in deionized water and saline solution (0.2 wt% NaCl_(aq)). A crosslinker concentration of 5 wt% sepiolite nanocomposite superabsorbent was shown to give the best results (1419 g g^?1). Moreover, experimental results indicate that the absorbency in saline solution is smaller than that in deionized water. Rates of swelling for these absorbents were found to fit the Voigt expression. Finally, the model approximates Case II sorption in the early stages of the swelling process and Case I in the later stages. Copyright © 2006 Society of Chemical Industry     

Influence of potassium humate on the swelling properties of a poly(acrylic acid‐co‐acrylamide)/ potassium humate superabsorbent composite

A novel superabsorbent composite, poly(acrylic acid‐co‐acrylamide)/potassium humate (PAA‐AM/KHA), was prepared by aqueous solution polymerization from acrylic acid, acrylamide, and potassium humate (KHA) with N,N′‐methylenebisacrylamide as a crosslinker and potassium peroxydisulfate as an initiator. The effects of incorporated KHA on the water absorbency, swelling rate, and reswelling capability were investigated. The swelling property of PAA‐AM/KHA in various saline solutions was studied systematically. The results show that the comprehensive properties and especially salt‐resistant ability of PAA‐AM/KHA were enhanced. There was a linear relationship between the saturated water absorbency and the minus square root of the ionic strength of the external medium, and the water absorbency of PAA‐AM/KHA in various salt solutions had the following order: NH₄Cl_(aq) = KCl_(aq) = NaCl_(aq) > MgCl_2(aq) > CaCl_2(aq) > AlCl_3(aq) > FeCl_3(aq). Moreover, the polymeric net structure of PAA‐AM/KHA was examined with respect to that of poly(acrylic acid‐co‐acrylamide). The results indicate that the polymeric net of PAA‐AM/KHA was improved by the introduction of a moderate amount of KHA into the superabsorbent composite and made more suitable for agriculture and horticulture applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis of poly(acrylic acid)/sodium humate superabsorbent composite for agricultural use

A novel poly (acrylic acid)/sodium humate superabsorbent composite was synthesized by graft copolymerization reaction of acrylic acid (AA) on sodium humate micropowder using N,N′‐methylenebisacrylamide (MBA) as a crosslinker and potassium peroxydisulfate (KPS) as an initiator in aqueous solution. The effects on water absorbency of factors such as reaction temperature, initial monomer concentration, and degree of neutralization of AA, amount of crosslinker, initiator, and sodium humate were investigated. The superabsorbent composite was characterized by scanning electron microscopy, and the graft copolymerization reaction of AA on sodium humate micropowder was characterized by IR spectroscopy. Results obtained from this study show that the water absorbency of the superabsorbent composite synthesized under optimal conditions for synthesis with a sodium humate content of 5.3% exhibited absorption of 684 g H₂O/g sample in distilled water. Water‐retention in soil is enhanced by the use of the superabsorbent composite. The effect of superabsorbent composite on the growth of corn is reported. The superabsorbent composite may be of use as water management materials for agriculture purposes in desert and drought‐prone areas. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5137–5143, 2006