共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
等离子点火技术已经成为一种广泛应用于工业和科学研究领域的方法,它可以通过激励源在气体中产生等离子体放电现象,进而实现高温、高压、高能量等效果。本文综述等离子点火技术的研究进展和应用前景,包括等离子点火的基本原理、等离子体形成机制、等离子点火技术的应用和发展趋势等方面。最后,总结等离子点火技术的优点和局限性,并提出未来的研究方向和发展趋势。 相似文献
3.
4.
5.
6.
7.
医用Ti合金表面生物玻璃涂层的制备与研究 总被引:2,自引:0,他引:2
在医用Ti合金表面涂覆一层生物玻璃涂层可阻止金属离子的溶出并且提高其生物活性。本文采用溶胶-凝胶法在Ti合金基体上制备了SiO2-CaO-MgO-P2O5系生物玻璃涂层。利用差示量热扫描仪(DSC)、扫描电镜(SEM)、拉伸试验和模拟体液(SBF)浸泡等手段系统研究了涂层的表面形貌、粘附性能及生物活性。结果表明:热处理温度为800℃时涂层与基体间的粘附强度最大,涂层越薄涂层与基体间的粘附强度越大;在模拟体液中浸泡30天后,材料表面生成了大量磷灰石。用溶胶-凝胶法可在Ti合金基体上制备出SiO2-CaO-MgO-P2O5系生物活性高的生物玻璃涂层。 相似文献
8.
9.
低温等离子技术工艺简单,可以实现烟气中多种污染物的同步脱除,是目前国内外烟气治理技术的研究热点之一。主要介绍了电子束法、电晕放电法和介质阻挡放电法等3种主流的低温等离子烟气治理技术,分析了各技术的原理和优缺点,并简述了3种技术的发展以及在烟气治理中的应用状况。 相似文献
10.
六十年代初期,美国Amchem Products公司的研究所确定,某些物质在一定的条件下可以依靠化学反应能沉积在金属物件的表面形成聚合物涂层。当与金属接触时沉积反应就立即开始。在被组成物所浸湿的整个表面形成的涂层,经水洗和热处理后变成均匀的疏水膜。在试验过程中发现沉积涂层的厚度取决于停留时间。在金属物件上涂复保护涂层的这种方法称为自泳——自沉积。 1966年美国Amchem Products公司首先提出了这种方法和组成物的专利,该法是将金属物件浸渍在酸性水性组成物中,在物件表面形成涂层。组成物含有分散在水中的有机成膜物质粒子、氟化物和氧化剂(过氧化氢或重铬酸盐)。由于金属物件的金属离子转移到组成物中和分散的有机成膜物丧失稳定性,即成膜物在溶液——物件界面上凝聚而形成涂层。在操作过程中,从组成物中除去金属离子或制止其作用,使组成物稳定。为了在工业上应用此方法,根据已得数 相似文献
11.
12.
13.
Dinesh Singh J. K. Gehlawat Musti S. Rao 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》1990,47(2):127-136
Oslefins and diolefins are important intermediates in the petrochemical industry and the future promises a further substantial increase in demand. While several catalysts have been formulated in the past for the abstraction of hydrogen from butenes and propylene, these catalysts are inefficient in the abstraction of first hydrogen from butane. Bismuth molybdates (β and γ-phases) containing iron oxide and supported on alumina are used as catalysts in the present investigation on the oxidative dehydrogenation of n-butane. Effects of catalyst content, temperature and oxygen: n-butane ratio on conversion and selectivity to butadiene and (C4H8 + C4H6) are studied in the following ranges of experimental conditions: β-bismuth molybdate/100 mol support I(K), 3–9; γ-bismuth molybdate/100 mol support I(K), 5-20; temperature, 400–500°C; O2: butane ratio, 0.6:1.7. 相似文献
14.
考登钢作为一种高耐候结构钢,广泛应用于各个领域。在火力发电方面,考登钢主要应用在工作环境比较恶劣的烟气加热器和空气预热器中。考登钢表面涂搪的目的就是进一步提高其耐腐蚀性能,延长使用寿命。为了提高考登钢元件的使用寿命,对考登钢表面涂搪瓷的可行性、密着性能、瓷釉、工艺控制、质量保证等方面进行了研究。 相似文献
15.
A viscometer used to measure the viscosity of 10 μl of a liquid, must be miniaturized down, and the liquid velocity gradient in the channel used to determine the viscosity coefficient. Two major factors that affect the liquid velocity are the mechanical forces exerted by the mechanical motors and electromagnetic forces. In this study, electrowetting on dielectric (EWOD) is adopted to drive liquids. Variously sized electrodes on a chip, and two shapes of channel are employed to measure the velocity gradient to determine the viscosity coefficient. The device is fabricated by microelectromechanical system (MEMS) technology. The dielectric layer used in EWOD has a high dielectric constant, BST (Ba0.7Sr0.3TiO3), to reduce the required applied voltage; its surface is coated with hydrophobic polymer, polytetrafluoro-ethylene (PTFE, Teflon® AF DuPont). Experimental results demonstrate that liquids can be pulled at 660 μm/s in linear channels by applying a voltage of 15 V. 相似文献
16.
17.
18.
研究了温度和pH值对漆酶酶活以及漆酶处理纤维压制纤维板性能的影响。结果表明,pH较低、温度较高时漆酶酶活较高,压制的纤维板强度性能较好。但温度太高(60~80℃),延长加热时间,漆酶稳定性变差,酶活明显降低,压制纤维板的强度下降。 相似文献
19.
In reexamining medium effects on photochemical reactions, we have emphasized those on unequilibrated excited species such as the Franck-Condon species. Despite recent advances in femtochemistry, such a discussion in molecular photochemistry is uncommon, and the problem remains challenging on account of the extremely short-lived excited species. However, in such cases, a small perturbation resulting from, for example, weak guest-host interactions could turn into a determining factor in dictating the course of a photochemical channel of deactivation. Examples of medium-directed diabatic processes have been examined with this idea in mind. A modified view on rhodopsin photoisomerization is presented along with the consideration that confinement does not necessarily lead to inhibition of reactions of the trapped substrate. 相似文献
20.
采用实验方法考察工艺参数对沉降斑的影响。基于一个带凸台的平板模具,采用L27(313)正交矩阵进行实验,研究了几何尺寸、熔体温度、注射时间、保压压力及保压时间对厚度突变处沉降斑形成的影响,同时还考虑了熔体温度和注射时间以及保压压力和注射时间之间的交互作用影响;通过性噪比分析和F检验优化成型工艺条件并对工艺参数的影响进行显著性分析。结果表明,对于厚度突变的平板制品,厚度突变的程度对其沉降斑形成的影响最大,其次为熔体温度,保压压力,保压时间等;采取减小厚度变化,降低熔体温度或增加保压压力和保压时间等措施,可以减小厚度突变处沉降斑,从而减少其对外观质量的影响;因素之间的交互作用对制品沉降斑的形成有一定的影响,熔体温度B和注射时间C之间的交互作用影响较为明显,而保压压力D和注射时间C之间的交互作用对该质量指标的影响最小,可以并入误差。 相似文献