Cimatron软件在模具CAD/CAM中的应用

介绍 Cimatron软件在模具设计和制造中的应用 ,并通过旋转式开关手柄模具的设计实例讨论了模具 CAD/CAM过程的技术方法 ,包括产品建模、分模及对模具凸、凹模进行 NC加工。结果表明 ,在模具制造中使用 Cimatron软件可大大缩短产品生产周期 ,利于生产     

Cimatron软件在模具CAD／CAM中的应用

介绍Cimatron软件在模具设计和制造中的应用，并通过旋转式开关手柄模具的设计实例讨论了模具CAD／CAM过程的技术方法，包括产品建模、分模及对模具凸、凹模进行NC加工。结果表明，在模具制造中使用Cimatron软件可大大缩短产品生产周期，利于生产。     

基于UG／CAM模块可变轴曲面轮廓数控铣的研究

提出了UGNX／CAM模块中可变轴曲面轮廓铣削的CAM及NC程序生成的思路、方法。通过一具体实例讨论了可变轴曲面轮廓铣数控加工中,工艺设计与规划的方法,研究了可变轴曲面轮廓铣数控加工中,参数的合理设置方法及其误差的有效控制手段。     

Cimatron E 4.0在四缸电喷排气管模具制道中的应用

在高速发展的CAD/CAM软件及数控设备的支持下,模具行业一些构造复杂、形状特殊、精度很高的零件得以实现加工。本文将结合流行的CAM软件Cimatron E 4.0对四缸电喷排气管模具下模的一些加工要点进行论述。     

基于Pro/E鞋模造型在MasterCAM加工中的应用

鞋模曲面造型是CAD/CAM/CAE软件中比较典型的曲面造型实例.利用高端软件进行鞋模的曲面造型,可以大大提高绘图效率.本文介绍了在PRO/E环境下进行鞋模曲面造型的方法,并在MasterCAM中加工鞋模的应用.     

基于Cimatron E7.0的模具高速加工编程模板设计

论述了高速加工技术应用于模具制造的优点及当前存在的问题。总结了高速加工对刀具路径要求。以飞轮壳凹模高速数控加工程序编制为例,详细介绍了利用Cimatron E7.0软件编制模具高速加工程序的方法。提出了利用设计模具编程模板解决当前某些问题的方法。编程模板在模具数控加工中的应用,实现了CAPP与CAM编程的一体化操作和信息的有效集成,帮助工艺人员快速、精密地完成零件的加工制造,并且不仅使加工效率大大提高,还使模具表面质量更佳,使用寿命更长。     

Cimatron产品培训系列讲座第九讲:Cimatron E数控编程--曲面铣简介

Cimatron E的曲面铣功能是完全基于斜率一体化加工特征的，对于不同的曲面加工控制区可提供多种加工策略．实现了不同轨迹的复合铣功能。同时，其根据模型特征的几何形状分析，给用户提供了高效率和高质量的曲面精度。     

CIMATRON E在铸造模具制造中的应用

CIMATRON E是以色列CIMATRON公司新近推出的全WINDOWS界面的CAD/CAM一体化软件。在草图约束上采用D-Cubed/DCM草图约束求解器,实体造型采用Spatial/ACIS核心。曲面造型和加工继承Cimatron it的优点,采用Cima-     

典型复杂型面模件高效数控加工策略

以垫片模下模镶件为研究对象,重点研究了数控加工工艺的优化问题,旨在提高模具型腔数控加工效率、加工质量、降低刀具磨损,实施高效的数控加工策略;提出了模具型腔粗铣加工刀具组合方法,进行了粗铣加工走刀方式对比分析,针对深孔、薄壁、复杂轮廓曲面等难加工部分制定了相应的加工策略,优化了加工工艺,使用UG CAM进行编程,生成了高效的加工刀路,进行了加工仿真,并自行开发了后处理器,在华中文控铣床上加工出试样,该策略提高了加工效率、产生了良好的经济效益.     

数码相机面壳凸模的数控加工

采用CimatronE软件对数码相机面壳凸模进行三维造型和数控加工程序编制,介绍了数码相机面壳凸模的加工工艺.实例表明,在模具加工中采用CimatronE的数控加工技术可以大大缩短设计制造周期.     

Minimal Realization of Linear Graph Models for Multi-physics Systems

An engineering system may consist of several different types of components,belonging to such physical"domains"as mechanical,electrical,fluid,and thermal.It is t...     

INTEGRAL EQUATION METHOD＇S APPLICATION IN HOLE-EDGE STRESS OF COMPOSITE MATERIAL PLATE WITH DIFFERENT SHAPED HOLES

The strength of composite plate with different hole-shapes is always one of the most important but complicated issues in the application of the composite material. The holes will lead to mutations and discontinuity to the structure. So the hole-edge stress concentration is always a serious phenomenon. And the phenomenon makes the structure strength decrease very quickly to form dangerous weak points. Most partial damage begins from these weak points. According to the complex variable functions theory, the accurate boundary condition of composite plate with different hole-shapes is founded by conformal mapping method to settle the boundary condition problem of complex hole-shapes. Composite plate with commonly hole-shapes in engineering is studied by several complex variable stress fimction. The boundary integral equations are founded based on exact boundary conditions. Then the exact hole-edge stress analytic solution of composite plate with rectangle holes and wing manholes is resolved. Both of offset axis loadings and its influences on the stress concentration coefficient of the hole-edge are discussed. And comparisons of different loads along various offset axis on the hole-edge stress distribution of orthotropic plate with rectangle hole or wing manhole are made. It can be concluded that hole-edge with continuous variable curvatures might help to decrease the stress concentration coefficient; and smaller angle of outer load and fiber can decrease the stress peak value.     

Non-monotonic material contrast in scanning ion and scanning electron images

30 keV Ga⁺ focused ion beam induced secondary electron (iSE) imaging was used to determine the relative contrast between several materials. The iSE signal compared from C, Si, Al, Ti, Cr, Ni, Cu, Mo, Ag, and W metal layers does not decrease with an increase in target atomic number Z₂, and shows a non-monotonic relationship between contrast and Z₂. The non-monotonic relationship is attributed to periodic fluctuations of the stopping power and sputter yield inherent to the ion–solid interactions. In addition, material contrast from electron-induced secondary electron (eSE) and backscattered electron (BSE) images using scanning electron microscopy (SEM) also shows non-monotonic contrast as a function of Z₂, following the periodic behavior of the stopping power for electron–solid interactions. A comparison of the iSE and eSE results shows similar relative contrast between the metal layers, and not complementary contrast as conventionally understood. These similarities in the contrast behavior can be attributed to similarities in the periodic and non-monotonic function defined by incident particle–solid interaction theory.     

Application of Feature Extraction through Convolution Neural Networks and SVM Classifier for Robust Grading of Apples

This paper proposes a novel grading method of apples,in an automated grading device that uses convolutional neural networks to extract the size,color,texture,an...     

分布动态载荷识别的抗噪处理

针对正交多项式频域法在用多种响应对矩形薄板进行载荷识别中抗噪性较差的问题,综合运用平均法、矩阵预处理和奇异值截断法等方法对之进行改善,并引入空间映射的思想,将该方法的应用范围拓展为复杂的模型.利用仿真算例,证实了该方法具有较好的抗噪性.     

基于MELTAC-N平台的核电厂安全级DCS环网研究与测试

针对工程实践中环网通讯相关问题的处理缺乏理论基础及国产化安全级DCS平台的开发缺乏成熟经验借鉴问题,对基于MELTAC-N平台核电厂安全级DCS环网的软硬件实现进行了研究。提出了安全级DCS环网双环网冗余设计、光切换开关设计等硬件设计方法,以及以RPR协议为基础,采用全数据收发策略的软件设计方法。在CPR1000安全级DCS平台上对安全级DCS环网的可靠性及实时性进行了评价,并进行了容错能力、响应时间及响应时间稳定性测试验证实验。结果表明,基于MELTAC-N平台安全级DCS环网软硬件设计具有较好的容错能力及响应时间稳定性。     

The laboratory simulation of abrasive wear

Abrasive wear has long been recognised as one of the most potentially serious tribological problems facing the operators of many types of plant and machinery; several industrial surveys have indicated that wear by abrasion can be responsible for more than 50% of unscheduled machine and plant stoppages. Locating the operating point of a tribological contact in an appropriate operational ‚map’︁ can provide a useful guide to the likely nature and origins of the surface degradation experienced in use, though care must be exercised in choosing the most suitable parameters for the axes of the plot. Laboratory testing of materials and simulations of machine contacts are carried out for a number of purposes; at one level for the very practical aims of ranking candidate materials or surface hardening treatments in order of their wear resistance, or in an attempt to predict wear lives under field conditions. More fundamentally, tests may be aimed at elucidating the essential physical mechanisms of surface damage and loss, with the longer term aim of building an analytical and predictive model of the wear process itself. In many cases, component surface damage is brought about by the ingress of hard, particulate matter into machine bearing or sealing clearances. These may be running dry although, more usually, a lubricant or service fluid is present at the interface. A number of standardised wear test geometries and procedures have been established for both two- and three-body wear situations, and these are briefly described. Although abrasive wear is often modelled as following an ‚Archard’︁ equation (i.e. a linear increase in material loss with both load and time, and an inverse dependence on specimen hardness) both industrial experience and laboratory tests of particularly lubricated contacts show that this is not always the case: increasing the hardness differential in an abrasively contaminated lubricated pair may not always reduce the rate of damage to the harder surface.     

Short-Term Relay Quality Prediction Algorithm Based on Long and Short-Term Memory

The fraction defective of semi-finished products is predicted to optimize the process of relay production lines, by which production quality and productivity ar...     

End-to-End Multiview Gesture Recognition for Autonomous Car Parking System

The use of hand gestures can be the most intuitive human-machine interaction medium.The early approaches for hand gesture recognition used device-based methods....     

Limits of topographic measurement by the scanning tunnelling and atomic force microscopes

Parameters describing the topographic character of a surface (height, surface wavelength, slope and curvature) can be derived from equivalent sinusoidal profiles. The response of a surface-measuring instrument may be modelled in terms of instrument parameters such as stylus radius, and scanning range and resolution. The performance of the instrument may then be mapped as a zone in amplitude-wavelength (AW) space to show the sinusoidal profiles it is capable of measuring. In a first-order analysis the STM and AFM are considered as equivalent to contact-stylus instruments with a notional stylus radius equal to the tip radius plus the gap. Comparisons between different instruments and types of instrument are readily made by mapping in AW space. The error arising from convolution of the sinusoidal profile with that of the finite tip may be quantified and plotted as contours in AW space.