A novel mode-splitting detection scheme in 43-Gb/s CS- and DCS-RZ signal transmission

Sophistication of the transmission format for 40-Gb/s/ch WDM networks is indispensable. In long-haul transmission applications, the selection of transmission format should be a principal issue. Recently, we have proposed several transmission formats including carrier-suppressed return-to-zero (CS-RZ) and duo-binary-carrier-suppressed (DCS-RZ), in so doing addressing the issue of superior performance versus fiber nonlinearity and spectral efficiency. The special spectrum structure of these formats enables a novel mode-splitting detection scheme. The scheme realizes a variety of applications in 40-Gb/s/ch transmission; including expansion of dispersion tolerance, automatic dispersion compensation, and BER improvement. We achieved 1.6 times. expansion of dispersion tolerance of 43-Gb/s DCS-RZ signals by introducing mode-splitting in the receiver. By applying the mode-splitting scheme for CS-RZ signals, we also demonstrated precise chromatic dispersion measurement with its sign detection without the need for any dithering operation and its application to automatic dispersion compensation at 43-Gb/s CS-RZ transmission.     

Investigation of system upgradability over installed fiber-optic cable using 40-Gb/s WDM signals toward multiterabit optical networks

An investigation of system upgradability of installed fiber-optic cable was conducted using 40-Gb/s wavelength-division-multiplexing (WDM) signals toward multiterabit optical networks. A field trial of 63-channel 40-Gb/s dispersion-managed soliton WDM signal transmission was successfully demonstrated over 320-km (4 /spl times/ 80-km) installed nonzero-dispersion-shifted fibers. The average Q factor of 15.4 dB was obtained, and very stable long-term bit-error-ratio performance was confirmed without polarization-mode dispersion compensation. This system upgradability investigation in the field environment provided the confidence to introduce 40-Gb/s technologies and effectively to construct multiterabit optical networks following the demand increase in the future.     

Application of super-DWDM technologies to terrestrial terabit transmission systems

This paper describes application areas, elemental technologies, and the feasibility of terrestrial terabit wavelength division multiplexing (WDM) transmission systems based on super-dense wavelength division multiplexing (DWDM) technologies with a channel spacing of 12.5 GHz. Numerical simulation results quantitatively show that the merit of super-DWDM transmission is the elimination of the need for dispersion compensation over the several hundreds of kilometers of standard single-mode fiber (SMF). To support super-DWDM transmission, the prototype of a multiwavelength generator, which consists of just an intensity modulator and a phase modulator, is developed as a small-size WDM light source with high-wavelength stability. We use this prototype to conduct a 1.28-Tb/s (512 channels /spl times/ 2.5 Gb/s) transmission experiment with a channel spacing of 12.5 GHz over 320 km (80 km /spl times/ 4 span) of standard SMF without dispersion compensation. The potential and the feasibility of super-DWDM transmission with a channel spacing of 12.5 GHz for terrestrial systems is confirmed by the numerical simulation and the transmission experiment.     

Transparent ultra-long-haul DWDM networks with "broadcast-and-select" OADM/OXC architecture

We describe an experimental realization of ultra-long-haul (ULH) networks with dynamically reconfigurable transparent optical add-drop multiplexers (OADMs) and optical cross-connects (OXCs). A simple new approach to dispersion management in ULH dense-wavelength-division-multiplexing (DWDM) transparent optical networks is proposed and implemented, which enables excellent transmission performance while avoiding dispersion compensation on a connection-by-connection basis. We demonstrate "broadcast-and-select" node architectures that take full advantage of this method. Our implementation of signal leveling ensures minimum variations of path-averaged power among the wavelength-division-multiplexing (WDM) channels between the dynamic gain-equalizing nodes and results in uniform nonlinear and spontaneous-emission penalties across the WDM spectrum. We achieve 80/spl times/10.7-Gb/s DWDM networking over 4160 km (52 spans/spl times/80 km each) of all-Raman-amplified symmetric dispersion-managed fiber and 13 concatenated OADMs or 320/spl times/320 wavelength-port OXCs with 320-km node spacing. The WDM channels use 50-GHz grid in C band and the simple nonreturn-to-zero (NRZ) modulation format. The measured Q values exhibit more than a 1.8-dB margin over the forward-error correction threshold for 10/sup -15/ bit-error-rate operation. We compare these results with point-to-point transmission of 80/spl times/10-Gb/s NRZ WDM signals over 4160 km without OADM/OXC and provide detailed characterization of penalties due to optical signal-to-noise-ratio degradation, filter concatenation, and crosstalk.     

Theoretical investigation of 8 /spl times/ 10-Gb/s WDM signal transmission performance based on gain-equalized SOAs using backward Raman pumping at DCF

We have theoretically investigated 8 /spl times/ 10-Gb/s wavelength-division multiplexing (WDM) signal transmission characteristics based on semiconductor optical amplifiers (SOAs) with equalized gain using discrete Raman amplification (DRA). Gain equalization and low noise figures have been obtained by adjusting the backward Raman pumping power and wavelength at a dispersion compensating fiber (DCF) for each span. Bit-error-rate characteristics were calculated for 8 /spl times/ 10-Gb/s WDM signal transmission over 6 /spl times/ 40-km single-mode fiber (SMF) + DCF links with gain-equalized SOAs using DRAs at DCF. Approximately a 2.5-dB improvement of the receiver sensitivity was achieved by using SOAs and DRAs with optimized Raman pumping. One can easily upgrade the transmission length of a link based on SOAs with an appropriate backward pump laser at each DCF.     

160-gb/s adaptive dispersion equalization using an asynchronous dispersion-induced chirp monitor

This paper describes an adaptive dispersion equalizer (ADE) that uses an asynchronous dispersion-induced chirp monitor and the detailed study of the first demonstration of 160-Gb/s adaptive dispersion equalization. The device successfully equalized the dispersion change over a 40/spl deg/C temperature range (from 5/spl deg/C to 45/spl deg/C) and the dispersion slope of an 80-km dispersion-shifted fiber (DSF). The ADE will enhance the feasibility of 160-Gb/s optical transmission systems.     

A 40-Gb/s/ch WDM transmission with SPM/XPM suppression throughprechirping and dispersion management

This paper proposes to combine prechirping with dispersion management scheme in such a way as to suppress the power penalty induced by self-phase modulation (SPM) and cross-phase modulation (XPM) in 40-Gb/s per channel wavelength-division multiplexed (WDM) transmission systems with long-amplifier spacing. First, we show that the optimum total dispersion to minimize SPM depends on prechirping and the local dispersion of the transmission fiber, unlike that for minimizing XPM. Next, it is shown that, by optimizing the combination of prechirping and local dispersion, these two optima can be made to match so as to improve the allowable maximum fiber input power. Finally, the operation of the proposed optimization scheme is confirmed experimentally, and 4×40-Gb/s WDM transmission over 400 km of nonzero dispersion-shifted fiber (NZDSF) is demonstrated successfully with the fiber input power of +10 dBm/ch and 250 GHz channel spacing     

25.6-Tb/s WDM Transmission of Polarization-Multiplexed RZ-DQPSK Signals

We demonstrate record 25.6-Tb/s transmission over 240 km using 160 WDM channels on a 50-GHz grid in the C+L bands. Each channel contains two polarization-multiplexed 85.4-Gb/s RZ-DQPSK signals, yielding a spectral efficiency of 3.2b/s/Hz in each band.     

Long-haul soliton WDM transmission with periodic dispersioncompensation and dispersion slope compensation

A 20 Gb/s-based soliton wavelength division multiplexed (WDM) transmission experiments using periodic dispersion compensation and dispersion slope compensation were demonstrated. Accumulated dispersion slope was compensated with two methods. The first method was periodical individual dispersion compensation. By using this technique, 60 Gb/s (20 Gb/s×3 WDM) transmission over 8000 km was demonstrated. The second method was the use of a dispersion-flattened transmission fiber. 160 Gb/s (20 Gb/s×8 WDM) transmission over 4000 km using periodically dispersion compensated dispersion-flattened fiber was also demonstrated     

Design theory of long-distance WDM dispersion-managed transmissionsystem

This paper describes a novel design theory of long distance wavelength division multiplexed (WDM) dispersion-managed optical transmission systems. Assuming that the transmission distance, bit rate, and number of WDM channels are initially known, we investigate the optimum dispersion allocation and input power per channel to achieve the minimum channel spacing. Based on the design guidelines for single-channel and multichannel systems, we establish the optimal design strategy. Details of the design procedure are demonstrated for 2.5-, 5-, and 10-Gb/s 10000 km WDM systems by using computer simulations. Next, we study the impact of the fiber dispersion slope on the usable wavelength span, and show that the attainable capacity of the representative 5-Gb/s 10000 km WDM system employing the postcompensation scheme can not exceed 100 Gb/s. Finally, we propose several techniques to approach the ultimate capacity of the WDM system and show that up to 1 Tb/s (200×5 Gb/s) 10000 km system can be implemented without utilizing the in-line dispersion slope compensation scheme. We also discuss the 10 Gb/s-10000 km WDM system employing in-line dispersion slope compensation     

Some enabling techniques for polarization mode dispersion compensation

Progress toward 40-Gb/s polarization-mode dispersion (PMD) compensation is presented in several areas. A single-waveplate polarization scrambler that generates Stokes' parameters with just three harmonics has been realized. Together with an arrival-time detection scheme, it allows the detection of about 1 ps of PMD within 2.4 /spl mu/s in a 40-Gb/s nonreturn-to-zero transmission setup. A scrambler that operates independent of its input polarization has also been realized. Both scramblers can be shared among a number of wavelength-division-multiplexed (WDM) channels for which PMD is to be detected. Furthermore, an inverse scattering technique has been implemented to determine differential group-delay profiles of an improved distributed PMD compensator in X-cut, Y-propagation LiNbO/sub 3/. In this context, the most common kind of higher order PMD is identified, which typically persists after compensation of first-order PMD. In a fiber link with polarization scrambling, it is shown to be measurable in a most efficient manner by comparing the rising and falling slopes of the detected signal using two oppositely poled one-way rectifiers placed at the output of a differentiator.     

Performance Comparison of Duobinary Formats for 40-Gb/s and Mixed 10/40-Gb/s Long-Haul WDM Transmission on SSMF and LEAF Fibers

Duobinary formats are today considered as being one of the most promising cost-effective solutions for the deployment of 40-Gb/s technology on existing 10-Gb/s WDM long-haul transmission infrastructures. Various methods for generating duobinary formats have been developed in the past few years but to our knowledge their respective performances for 40-Gb/s WDM transmission have never been really compared. In this paper, we made an extensive numerical evaluation of the robustness of these different types of duobinary transmitter to accumulation of ASE noise, chromatic dispersion, PMD but also to single-channel and WDM 40-Gb/s transmission impairments on standard single-mode fiber. A numerical evaluation of the ability of duobinary format for mixed 10/40-Gb/s WDM long-haul transmission with 50-GHz channel spacing is also led, on both standard single-mode and LEAF fibers, and compared to DQPSK format. In order to clearly identify the limiting transmission effects on each of these two fiber types, the assessment of the performance of a 50-GHz spaced WDM 40-Gb/s long-haul transmission using either duobinary or DQPSK channels only is implemented at last.      

Adaptive dispersion equalization by monitoring relative phase shiftbetween spacing-fixed WDM signals

This paper proposes a novel adaptive dispersion equalization system that equalizes the temperature-induced dispersion fluctuation in long-span ultra-high-speed optical transmission systems. The system monitors the dispersion fluctuation by measuring the relative delay between two wavelength division multiplexed (WDM) signals, and equalizes the dispersion fluctuation by wavelength tuning. A variable-dispersion equalizer can be used instead of wavelength tuning. Adaptive equalization is successfully demonstrated in 40-Gb/s (8-ps-RZ pulses) 400-km transmission. Furthermore, the proposed equalization system is shown to be applicable to WDM systems that use dispersion and dispersion slope compensation. Since the sensitivity to the dispersion fluctuation is improved by extending the wavelength spacing of the signal and monitor channels, the system is shown to operate even when polarization-mode dispersion (PMD) of the transmission fiber must be taken into account     

WDM field trials of 43-Gb/s/channel transport system for optical transport network

This paper describes recent technical challenges and the progress toward the realization of the optical transport network (OTN) based on 43 Gb/s channel. We describe the new digital frame format "OTU3: Optical Channel Transport Unit 3," which is standardized in ITU-T for OTN, for the enhancement of the network management capability in the OTN based on 43-Gb/s channels. We first proposed 43-Gb/s/ch dense wavelength-division multiplexing (DWDM) dispersion-managed transmission system using carrier-suppressed return-to-zero (CS-RZ) format that has several attractive features; it advances the evolution of OTN into 100 GHz-spaced long-haul DWDM transport networks. The first wavelength-division multiplexing (WDM) field trials confirmed the superiority of CS-RZ format in the DWDM transmission performance for the first time. The first 1 Tb/s (25 /spl times/ 43 Gb/s) WDM field trial confirmed the excellent network management capability of OTU3 in future data-centric OTN using the newly developed 43-Gb/s OTN line-terminal prototype.     

WDM upgrading of an installed submarine optical amplifier system

This paper describes the WDM upgrading of a submarine optical amplifier system installed for single-channel transmission in commercial use. The key technologies used include 10-Gb/s high-speed forward error correction, preemphasis to overcome the optical passband-width constraint, optimized signal pulse format that leads to partial return-to-zero (PRZ) signaling, and dispersion compensation to suppress the degradation caused by fiber nonlinearity and dispersion. It also reports field experimental results on upgraded system performance. The results confirm that simply upgrading the terminal equipment allows the transmission capacity of a submersed line consisting of submarine repeaters and cables to be flexibly increased from 10 Gb/s to 40 Gb/s per fiber pair     

Comparison between NRZ and duobinary Modulation at 43 gb/s for MLSI-based and DCF-based transmission systems

In this paper, the performance of midlink spectral inversion (MLSI) is compared with the performance of "conventional" dispersion compensation fiber (DCF)-based transmission for two data formats: 43-Gb/s ON-OFF keying nonreturn-to-zero (OOK-NRZ) and 43-Gb/s duobinary. In the MLSI-based system, a polarization-diverse subsystem was used for spectral inversion employing magnesium-oxide-doped periodically poled lithium niobate (PPLN) waveguide technology. The transmission link consists of 8 /spl times/ 100 km standard single-mode fiber (SSMF) using erbium-doped fiber amplifiers (EDFAs) for amplification. Compared to the DCF-based system, it is seen that the MLSI-based configuration enhances the dispersion tolerance for both the NRZ and the duobinary modulation formats. It is concluded that the combination of the MLSI and the duobinary modulation format yields a highly dispersion-tolerant stable 43-Gb/s transmission system.     

Advanced components and sub-system solutions for 40 Gb/s transmission

With the commissioning of the latest 10-Gb/s systems, vendors are now in the process of developing architectures for their next-generation products. 40-Gb/s components and subsystems are currently in development to address the necessities of these next-generation systems. The top three challenges associated with 40-Gb/s transmission are optical signal-to-noise ratio, dispersion, and high-speed components. In order to realize 40-Gb/s transmission, new component and subsystem developments are crucial. This paper reviews the latest transmission technologies and dispersion compensation techniques developed to fulfill 40-Gb/s transmission system requirements.     

Low insertion loss and low dispersion penalty InGaAsP quantum-well high-speed electroabsorption modulator for 40-Gb/s very-short-reach, long-reach, and long-haul applications

We present a metal-organic-chemical-vapor-deposition-grown low-optical-insertion-loss InGaAsP/InP multiple-quantum-well electroabsorption modulator (EAM), suitable for both nonreturn-to-zero (NRZ) and return-to-zero (RZ) applications. The EAM exhibits a dynamic (RF) extinction ratio of 11.5 dB at 1550 nm for 3 Vp-p drive under 40-Gb/s modulation. The optical insertion loss of the modulator in the on-state is -5.2 dB at 1550 nm. In addition, the EAM also exhibits a 3-dB small-signal response (S21) of greater than 38 GHz, allowing it to be used in both 40-Gb/s NRZ and 10-Gb/s RZ applications. The dispersion penalty at 40 Gb/s is measured to be 1.2 dB over /spl plusmn/40 ps/nm of chromatic dispersion. Finally, we demonstrate 40-Gb/s transmission performance over 85 km and 700 km.     

Fully electrical 40-Gb/s TDM system prototype based on InP HEMTdigital IC technologies

This paper presents a fully electrical 40-Gb/s time-division-multiplexing (TDM) system prototype transmitter and receiver. The input and output interface of the prototype are four-channel 10-Gb/s signals. The prototype can be mounted on a 300-mm-height rack and offers stable 40-Gb/s operation with a single power supply voltage. InP high-electron mobility transistor (HEMT) digital IC's perform 40-Gb/s multiplexing/demultiplexing and regeneration. In the receiver prototype, unitraveling-carrier photodiode (UTC-PD) generates 1 V_pp output and directly drives the InP HEMT decision circuit (DEC) without any need for an electronic amplifier. A clock recovery circuit recovers a 40-GHz clock with jitter of 220 fs_pp from a 40-Gb/s nonreturn-to-zero (NRZ) optical input. The tolerable dispersion range of the prototype within a 1-dB penalty from the receiver sensitivity at zero-dispersion is as wide as 95 ps/nm, and the clock phase margin is wider than 70° over almost all the tolerable dispersion range. A 100-km-long transmission experiment was performed using the prototype. A high receiver sensitivity [-25.1 dBm for NRZ (2⁷-1) pseudorandom binary sequence (PRBS)] was obtained after the transmission. The 40-Gb/s regeneration of the InP DEC suppressed the deviation in sensitivity among output channels to only 0.3 dB. In addition, four-channel 40-Gb/s wavelength-division-multiplexing (WDM) transmission was successfully performed     

1.6 Tbit/s transmission over 2160 km of field-deployed dispersion-managed fibre without per channel dispersion compensation

40/spl times/40 Gbit/s ultra-long haul transmission over 2160 km of cabled and field-deployed dispersion-managed fibre (DME) with extremely low total dispersion ripple (/spl plusmn/27 ps/nm over C-band) is demonstrated. No per channel dispersion compensation is required. A Q factor margin of 1.4 dB to standard 7% forward error correction limit is achieved.