板坯连铸结晶器保护渣卷渣及其影响因素的研究

对板坯连铸结晶器保护渣卷渣进行的水力学模拟研究结果表明,主要有三种类型的卷渣,即窄边附近的剪切卷渣、浸入式水口附近的旋涡卷渣和水口吹入的氩气泡上浮冲击钢渣界面引起的卷渣.拉速增加、减少浸入式水口浸入深度、减小水口出口倾角和增加吹入的Ar流量均会加大表面流速和液面波动,增大结晶器内卷渣的倾向,而其中拉速增加对卷渣的影响最大.当结晶器宽度为1 900 mm、采用1.4 m/min的拉速时,选择向下25°的水口出口角度、250 mm的水口浸入深度和10 L/min的Ar流量可将板坯结晶器内流场的表面流速和液面波动控制在合理的范围内,从而减小和避免结晶器内卷渣.     

基于PIV技术的板坯连铸结晶器内钢水流动行为研究

利用粒子图像测速技术,以200 mm×2040 mm板坯连铸结晶器为原型,建立1∶4水模型进行实验,对结晶器内钢液流动形态、流速及各流态所占比例、液面波动、以水口为中心结晶器两侧对称点速度随时间的变化、水口两侧液面水平流速、水口两侧对称位置液面至结晶器底部垂直方向速度和钢液对两侧窄面的冲击深度进行系统地研究和分析,并对比拉速的影响.研究表明,粒子图像测速技术不仅可以测量结晶器内流场流速,还可以对流场对称性进行全方位、多角度定量分析,为研究连铸参数变化,比如拉速、水口结构和水口浸入深度,对板坯连铸结晶器内钢液流动及对称性的影响提供一种较为精确的方法和思路.通过分析得出,在本实验条件下拉速0.5 m·min-1优于0.6 m·min-1.      

板坯连铸浸入式水口控流的物理和数值模拟

浸入式水口结构从根本上决定了结晶器内的钢液流动形式，采用物理模拟和数值模拟方法研究了水口结构及铸坯断面尺寸对板坯结晶器流动行为的影响。通过解析速度云图、表面流速、液面波动、冲击深度及保护渣覆盖情况等特征参数，对结晶器内钢液流动行为进行多角度定量表征。结果表明，水口侧孔倾角向上对1 600 mm×220 mm断面结晶器流场液面扰动较大，其倾角向下15°时射流冲击深度较大，倾角向下8°时最为适宜。水口底部形状会影响钢液的湍动能耗散及流场对称性，对比后得出凹底水口为最佳水口形状。侧孔形状对表面流速影响较小，但对自由液面波动有显著影响，可能导致钢液裸露；当水口侧孔面积一致时，矩形侧孔水口条件下的结晶器液面裸露面积小于跑道形侧孔和方形侧孔情况。而在浇注不同断面尺寸时，仅通过改变水口结构和使用工艺难以获得合理的结晶器流场，还需要借助其他控制流动的手段来推动未来板坯多元化生产的发展。本研究可为改善板坯质量提供理论与工艺指导。     

板坯连铸结晶器内液面波动的水模型研究

以某厂板坯连铸结晶器为原型,采用1:1的水模型进行试验,以瞬时波高为判断依据,研究了拉速、浸入式水口出口角度、水口浸入深度、水口底面结构等工艺参数对板坯结晶器内流场和液面波动行为的影响.提出了优化结晶器流场的工艺参数,为在实际生产中减少结晶器内卷渣提供了依据.结果表明:拉速对板坯连铸结晶器内液面波动的影响最大,水口倾角...     

连铸浸入式水口结构优化的水模型试验

以济钢板坯连铸结晶器为原型,采用几何相似比为1∶1,弗鲁德准数与原型相等的水模型进行试验,研究了不同拉速条件下,不同浸入式水口的侧孔倾角和出口尺寸对板坯结晶器内流场和液面波动行为的影响。结果表明:拉速一定的条件下,随着水口侧孔倾角和出口尺寸增大,液面波动减小,上、下涡心位置离结晶器窄面越近且冲击深度增加。综合考虑,选用侧孔倾角为5°、出口尺寸为100mm×65mm×R32.5mm的水口。     

宽板坯连铸结晶器内钢水流动的数值模拟

以150mm×1600～3250mm宽板坯连铸结晶器为研究对象,利用大型商业软件ANSYS CFX10.0建立了1个三维有限体积模型,对结晶器内钢液的流动进行数值模拟.研究了拉速、浸入深度、水口倾角、断面宽度等工艺参数对结晶器内流场和窄面冲击压力的影响.结果表明:随着拉速的增大,表面流速和钢液对窄面的冲击压力都显著增加,采用较大的水口倾角和浸入深度,可以抑制液面波动,减少卷渣.     

立式板坯连铸机结晶器内流场的数值物理模拟

采用1:1的水模型研究了200 mm×1:300 mm立式板坯连铸结晶器内流场和在水口浸入深度115mm、拉坯速度0.55 m/min时水口结构参数(侧孔尺寸40 mm×40 mm～40 mm×80 mm,侧孔角度+15。～一15。)对液面波动的影响,基于流体力学计算,利用Fluent软件和采用κ-ε双方程高雷诺数湍流模型对板坯结晶器内的流场进行了三维数值模拟。结果表明,数值模拟结果与物理模拟结果较吻合;水口结构参数对液面湍动能的影响较明显;在1~#～4~#水口中,2~#水口(40 mm×40 mm,+15°,向下,倒Y形底部)的使用性能相对较好;流股的冲击速度越浅,自由液面湍动能越大。     

板坯连铸结晶器数值模拟

运用Fluent 6.3对板坯连铸结晶器进行数值计算,研究拉速、水口浸入深度及水口开口角度对流场的影响.结果表明:对于断面1400 mm×230 mm结晶器,随拉速增加,液面最大水平和垂直流速均增加,而窄边冲击点的位置基本不变,随距液面距离增加,窄边速度先增加后减小,直至趋向于零;当拉速超过1.2 m.min-1时,液面水平速度增加明显.随水口浸入深度增加,液面最大水平流速减小,浸入深度超过140 mm时,最大水平流速变化不明显;垂直于液面方向的最大速度逐渐增加;对窄边冲击点影响较小.随水口开口向下角度增加,液面最大水平流速减小后增加,水口开口向下12.5°时液面最大水平流速最小,而水口开口向下10°~12.5°时窄边冲击点速度最小.      

浸入式水口对结晶器钢水流动与液面波动的影响

以国内某钢厂220 mm×1800 mm板坯连铸结晶器为原型,根据相似性原理建立相似比为0.6的水模型,利用粒子图像测速技术(PIV)对比不同浸入式水口(SEN)的出口角度、浸入深度及水口底部结构条件下的结晶器内流场流速特征,同时使用波高仪对液面波动振幅进行实时监测,并结合F数分析各SEN条件对结晶器内钢液流动特征.研究发现,在各浸入式水口条件下,位于结晶器液面1/4宽面处附近出现矢量流速向下的剪切流,同时在水口附近发现不规则漩涡.试验结果表明:浸入式水口的出口角度、浸入深度的增加能够强化上回旋区缓冲作用,降低结晶器液面表面流速;尽管凹底结构SEN能减弱钢液湍动能,但其对1/4宽面处剪切流速度的影响不大.另外,液面波动幅度和F数变化规律一致,且当浸入式水口出口角度15°、20°,浸入深度135 mm、145 mm条件下波幅与F数最为合理,从而减小或避免液面卷渣,提高连铸坯质量.      

宽板坯连铸结晶器内液面波动的水模型研究

以某厂宽板坯连铸结晶器为研究对象,采用1∶1水模型进行实验,研究了拉速、浸入深度、水口倾角、水口出口面积等工艺参数对结晶器内流场和液面波动的影响,以优化工艺参数,为在实际生产中减少卷渣提供依据.结果表明:随着结晶器宽度、拉速的增加,液面波动明显增大;采用较大的水口出口面积和浸入深度,可以抑制液面波动,避免卷渣.     

China's Major Non-ferrous Metals Imports & Exports

正~~     

Zinc Production by Province in 2014

正~~     

80% of Chinese Firms Purchasing Overseas Mines Ended up in the Red

<正>Minmetals Resources acquired the world’s largest copper mine under construction for USD5.85 billion.One after another,listed companies Jien Nickle,China Molybdenum and Chihong Zinc and Germanium raised money to get involved in overseas mining projects…SOEs and private enterprises are engaged in a frenzy of overseas mine purchasing.A reporter with Economic     

Copper Processing Profit Dropped Sharply,Copper Consumption Will Face Impact in the Second Half of the Year

正Judging from China’s copper consumption field,the biggest consumption unit is electric power,which accounts for 47%of total consumption;it is followed by light industry sector,including household electrical appliance,machinery,durable goods and hardware etc,which accounts for 22%of total consumption;followed by transportation field,     

Central Geological Prospecting Fund Newly Added 16.47 Million Tonnes of Bauxite in 2013

正In 2013,the Central Geological Prospecting Fund(CGPF)Project newly discovered 15 ore fields,including 3 large above ore fields,and 5medium sized ore fields.The reporter learned from the recently published"Annual Report of Central Geological Prospecting Fund Project(2013)"that,from 2006 to 2013 the CGPF     

Manufacturers of Copper Tube for Central Air Conditioner Use Face Mounting Pressure in the Final Quarter of the Year

正This year,the investment growth rate of real estate industry continued to slow down,sold area of commercial housing also dropped significantly,which brought huge pressure to the domestic air conditioning manufactures.In the first half of the year,by relying on high growth in national financial expenditure,along with investment in public infrastructure     

Xinjiang Ranks No.1 in Production of Primary Aluminum in China

正Kang Yi,Honorary Chairman of China Nonferrous Metals Industry Association,said recently at the Forum on Development of the Non-ferrous Metals Industry in Central and Western China held in Zhengzhou that,as more and more electrolytic aluminum factories in Xinjiang came into operation,the electrolytic aluminum output of Xinjiang had reached2,275,000 tons in the first 7 months this year,     

Shenhuo Coal Industry and Electricity Power Completed800,000 t/a Aluminum Project in Xinjiang

正"Xinjiang project has been completed according to schedule,but total completion and total start of production are two different concepts,after completion it still needs a gradual process of reaching production target."On the morning of November 3,Shenhuo Coal Industry and Electricity Power told investors the above statement on the investor interaction platform.     

Guangdong Metal Transaction Center has Become the Second Largest Precious Metal Transaction Platform Nationwide

正The reporter learned from Guangdong Province Precious Metal Transaction Center that in 2013the Center maintained healthy development momentum,and had become the second largest precious metal transaction platform in China in terms of market size;currently Guangdong is quickening steps of financial innovation for the Center,aiming to build a transaction center with international core competitiveness.     

Seven Rare Earth Projects Involving Close to 3 Billion Yuan Investment Landed In the HighTech Zone

正On May 22,Baotou Rare Earth Industry Cooperation Consultation MeetingProject Agreement-signing Ceremony was held in Ningbo,nearly 40 enterprises from Ningbo,Guangdong,Hunan,and Shanxi participated in project consultation.After multi-lateral communication,agreements were signed for a total of 7 rare earth projects successfully.