Maintenance Operations for the Circuit-Switched Digital Capability

The Bell system is planning to add a new circuit-switched digital capability (CSDC) to the telephone network. This new capability will provide for full duplex, circuit-switched, end-to-end synchronous 56 kbit/s digital connections. Using a combination of existing and new network elements, CSDC will allow present-day call setup methods and will support end-to-end digital data transmission in addition to voice transmission. Critical CSDC network elements are those associated with the loops between customers' premises and CSDC central offices. This paper provides an overview of the loop maintenance plan for CSDC, focusing on new automatic testing tools and test procedures. Also discussed are the network elements comprising CSDC (including loop configurations) and loop transmission performance objectives.     

ISDN: a snapshot

A snapshot of the present status of ISDN (integrated services digital network) is presented in terms of standardization efforts, field trials and demonstrations, implementations and services, and equipment and devices. A review of opinions and controversies as well as future trends is also given. The authors emphasize the importance of the worldwide standardization effort and discuss the organizations that are responsible for establishing such standards. It is pointed out that, with the limitation and inflexibility of the narrowband ISDN and the broadband ISDN, issues for higher-rate services have become prominent. For broadband services, the problem is not merely increasing the speed of the operation. It affects the compatibility of switching technology, the workability of the local loop arrangement, the availability of rate adaption, and the efficiency of bandwidth utilization. Although some basic principles of narrowband ISDN can be carried to broadband ISDN, the technology is quite different. For example, the interconnection and transmission problems of video, HDTV, (high-definition television), and high-speed data are different from those of voice. Thus, the standard 64-kb/s B channel itself, the fundamental rate of ISDN transmission, appears inadequate for wideband services. At present, the solution is to establish the multiples of 64 kb/s for accommodation of broadband or higher rates     

Digital optical CATV system using hubbed distribution architecture

A hubbed distribution architecture based on a bus-star configuration, three-level single single-mode fiber transmission using M-TPC line code, and high-speed IC technology is proposed. The architecture is cost-effective and compact. It is well suited to metropolitan area CATV systems and would allow a gradual transition to a broadband ISDN (integrated-services digital network) subscriber loop in the future. The proposed architecture is applied to a digital optical CATV system prototype. The equipment making up this system consists of a transmitter, hubs including video selectors, and subscriber unit. Two video channels are selected for each subscriber from eight video channels at hub stations. The transmission speed is 900 Mb/s, three-level for the trunk line and 200 Mb/s, three-level for each subscriber loop. Very compact and low-cost equipment is realized by using recently developed high-speed ICs. Experimental results show that the system satisfies requirements and that its commercial application is feasible     

Signaling System No. 7 ISDN User Part

The integrated services digital network (ISDN) user part of Signaling System No. 7 defines the signaling protocol which supports the establishment, supervision, and release of voice and nonvoice calls over circuit-switched connections between ISDN terminations of digital subscriber access lines. This paper gives an overview of the ISDN user part protocol, as defined in CCITT Recommendations Q.761-Q.766 [1], in terms of the signaling functions and procedures provided to support call and connection control in an ISDN, and in terms of the information elements and signaling messages that are used by the signaling functions in ISDN exchanges to communicate.     

Very high speed and high capacity packet switching for broadbandISDN

The authors discuss and propose a very-high-speed and high-capacity packet-switching (HPS) architecture for a future broadband ISDN (integrated-services digital network). The HPS network accommodates various communication services, such as voice, high-speed data, high-speed still picture, and video services. The proposed architecture has three significant principles: a high-speed oriented simple network protocol, separation of signaling and network control from data transfer, and hardware switching. These principles provide fast- and high-throughput transmission for data packets and reliable transmission and processing for call-control packets. The HPS protocol structure is addressed, which provides high flexibility for various communications services as well as high-speed capability. A 3-Gb/s capacity and building-block-structured packet-switching system architecture, using bus- and loop-type switch fabric, is also presented     

Design and Architecture of the High-Speed Digital Data Transmission System in NTT

Demand for high-speed wide-band telecommunication services is rapidly growing due to the remarkable progress in office, factory, and laboratory automation. These services are expected to be first introduced in leased circuits and then extended, to high-speed switched services. This paper presents the users' demands for such high-speed services and the NTT design concepts for the high-speed digital data transmission system (HDDTS) in NTT to provide such high-speed leased circuit service. The ISDN user-network interface is adopted. The basic high-speed pointto-point transmission service started in October 1984, and enhanced leased circuit service involving multiplexed interfaces and muitipoint circuits will be introduced in the fall of 1985.     

TRANSMISSION CAPABILITY OF DISCRETE MULTITONE MODULATION FOR TAIWAN’S SUBSCRIBER LOOPS

The transmission of 1.5 Mb/s and beyond data rate in the conventional twisted-pair local loops, called asymmetrical digital subscriber line (ADSL) technology, will be possible to create a new transport access capability to provide economic wideband voice/data/video integrated services directly to residential customers. The term ‘asymmetric’ in ADSL refers to the much higher data rate in the direction from central office (CO) to the customer and the lower rate of return (control) data from the customer to the CO. Discrete multitone (DMT) modulation has been selected as the modulation scheme in ADSL. Because the crosstalk of local loops in Taiwan is 10–15 dB worse than that in the US, the service capability of DMT ADSL for Taiwan’s local loops may be different from that in other countries, and thus needs to be evaluated. On the basis of the characteristics of Taiwan’s local loops, transmission capability is estimated to be 1.544 Mb/s and 6 Mb/s in Taiwan. Simulation results also show what percentage of users in Taiwan may have 1.544 Mb/s or 6 Mb/s of ADSL services. Far-end crosstalk (FEXT) and additive white Gaussian noise (AWGN) are considered to be the dominant noise sources in the work.     

Switched digital capability: An overview

SDC (Switched Digital Capability) allows end-to-end circuit-switched 56 kb/s data over much of the existing Bell System Network. Since SDC is based largely on the stored program-controlled space and time-division switches, 2-wire local loops, and T-carrier facilities that are already deployed in the network, it can be realized with minimum modification to the existing network. SDC is expected to play a major role in the evolution of the present network to the ISDN (Integrated Services Digital Network) of the future.     

Video and image applications on narrowband and broadband isdn

Two major ISDN applications which will undoubtedly affect world-wide telecommunications in the coming decade are discussed. They are: (1) video transmission and (2) image transmission. Brief reviews of videophone chronicle and the current video coding technologies are presented. The application of videophones using p × 64 (CCITT coding algorithm up to 1·5 Mb/s) and the DCT (discrete cosine transform) algorithm for narrowband ISDN are discussed. Broadcast TV quality DS3-45 MB/s video codecs are also briefly discussed as a probable videophone system in the broadband ISDN era. The explosive growth of facsimile services is reviewed, and the progress of image coding technologies and their standards are covered. The prospects of high resolution image transfer systems with ISDN are addressed.     

High-Speed Time Division Switch for 32-Mbit/s Bearer Rate Signals

This paper describes the high-speed time division switch employed in a 32-Mbit/s bearer signal communications system. System performance is realized by using three technologies. The first is a switch structure referred to as a 2-RAM 2-bank structure which ensures high-speed performance by increasing switching throughput four times over that of the basic structure. The second is the inclusion in the switch of two types of peripheral logic developed using Si-bipolar super-self-aligned process technology. The third is high-speed synchronous transmission of data. A large channel capacity time division switching network is also discussed. In conjunction with the network, these technologies make it possible to realize the ISDN time division switches necessary for such services as TV and high-definition TV communications.     

Properties of commercial 1.3-μm Fabry-Perot laser modules in atime compression multiplexing system

The practical properties of nine types of 1.3-μm Fabry-Perot laser modules were determined so as to construct a bidirectional transmission system. Time compression multiplexing (TCM) transmission is employed and the modules must act as both transmitter and receiver. Many modules are tested and it is found that the responsivity of a laser module is roughly proportional to the module's output power. The main source of variation in responsivity is determined to be due to coupling effects. Optical characteristics are measured over the range -15 to +65°C. The maximum transmission distance for narrow-band ISDN (integrated services digital network) services over single-mode fibers is determined for a bit rate of 3.5 Mb/s     

Photonic highway: broad-band ring subscriber loops using opticalsignal processing

The introduction of optical signal processing technology into transmission systems and basic experiments with optical drop/insert using bistable laser diodes are discussed. With broadband integrated services digital network (B-ISDN) architecture and technology now under study, optical signal processing (OSP) is being considered to increase network capacity and flexibility. B-ISDN will require over 40 Gb/s in the feeder loop that connects the central office and remote terminals having drop/insert function. Remote terminals will process large amounts of high-speed data. An OSP-based broadband subscriber loop photonic highway that uses a ring architecture linking photonic access nodes (PANs) that directly process optical signals is proposed. Each PAN has an optical drop/insert function and can synchronize optical frame signals using a proposed optical sampling memory. Optical drop/insert experiments confirmed the feasibility of the proposed method     

High bit rate digital subscriber line: a copper bridge to thenetwork of the future

It is argued that the high bit rate digital subscriber line (HDSL), permitting low-cost 1.5 Mb/s copper access, will ease the transition to fiber access by accelerating the use of higher speed services. Copper will dominate over fiber customer access for at least the next ten years. During this period, the success of high-speed switched services will depend on the connectivity provided by both fiber and copper access. HDSL will initially be used to serve private-line DS 1, ISDN primary rate access, and digital loop carrier feeders. Later, the HDSL will be applied to switched services such as metropolitan area networks (MANs) and circuit switched DS1s     

Southwestern Bell Telephone's ISDN experience

Southwestern Bell Telephone's (SWBTs) integrated services digital network (ISDN) experience has been heavily influenced by the realization that from a customer perspective, the most important aspects of ISDN are its applications. The authors describe the following ISDN applications that SWBT has been exploring: desktop conferencing; asynchronous protocol conversion to SNA/SDLC; VTAM INN link replacement; asynchronous protocol conversion to SNA/SDLC with multiplexing; remote 3174 multiplexing via B channel packet; remote 3174 multiplexing via B channel packet and NPSI; 327X emulation via SIMPC, SIM-VTAM, and NPSI; 327X emulation with QLLC and NPSI; asynchronous access to private packet-switched networks; asynchronous access to UNIX host; asynchronous access to UNIX host via PAD and X.25 multiplexing; 327X coaxial cable elimination; extended local area network with passive bus; asynchronous access to Ethernet terminal server; dedicated line replacement (64 kb/s); asynchronous modem pooling (out-dial); asynchronous modem pooling (in-dial); ISDN wide-area networking; ISDN data gateway; gateway to AppleTalk network; application processor features; circuit-switched compressed video; and Ethernet LAN bridging     

World-wide standardization of broadband ISDN

A growing market demand for high-performance voice, data, image and video networks, coupled with advances in high-speed technologies has heightened interest in broadband ISDN (BISDN) throughout the world. Network providers, equipment manufacturers and standards bodies are working jointly to accelerate the definition of BISDN interfaces in anticipation of emerging market opportunities. BISDN is being designed as the foundation upon which to implement very flexible, high-bandwidth, high-performance networks. A multiplexing concept called asynchronous transfer mode (ATM), which can offer bandwidth on demand at rates exceeding 150 Mb/s, high-speed packet switching, and an efficient protocol which adapts existing information streams into the ATM format are key attributes of the emerging BISDN network standards. This paper reviews the motivations behind BISDN, explains its key attributes and challenges and discusses possible strategies for evolving today's network toward BISDN.     

Broadband ISDN Switching Capabilities from a Services Perspective

Broadband switching and transmission technologies are maturing rapidly, promising to make broadband ISDN (B-ISDN) possible and potentially economical in the near future. The diversity of possible B-ISDN services provides much impetus for the implementation of B-ISDN, but complicates the task of specifying network switching requirements. This paper examines a few representative services in order to generate a set of basis vectors in capability space. New services are then projected onto this basis; if a new service cannot be constructed from the basis vectors, other vectors are added to the basis set. B-ISDN architects can then specify switching requirements by selecting those capability basis vectors that are required for the services most in demand. For full motion entertainment video services, circuit switching capability at about 150 Mbit/s may be required, while selective broadcast and remote switching capabilities may reduce the cost of these services. For subvideo-rate services, new transfer mode (NTM) capability may be required to allow users the flexibility to allocate access channels dynamically on a per-call basis. Multiple connection (e.g., voice and video) and multiple party call capabilities may be required for many B-ISDN services, implying a need to extend the ISDN signaling protocol. The capability for the user to request network code conversion between different coding formats (e.g., NTSC or HDTV), and network compression of signals to reduce the cost of interoffice facilities, may also be required. Finally, fast call setup capability and high calling volume capabilities may be required, implying a need to distribute call processing functions over multiple processors in the central office.     

ISDN Activities in Italy

Digitalization of the Italian telecommunications network is underway, as in many other countries, and a significant diffusion of digital transmission has already been achieved. Digital switching has already been introduced at both transit and local levels, with some 450 exchanges presently in operation. Both packet- and circuit-switched data networks are in operation. CCITT No. 7 is presently being introduced. In this network scenario, the already planned Italian developments towards the ISDN will include the provision in 1986 of 64 kbit/s digital connectivity and, two years later, the activation of a pilot ISDN service, whose main characteristics are described in the paper. An overview on further developments in ISDN research areas is also given.     

用Cisco路由器实现远程拨号接入局域网

本文着重阐述如何在局域网内利用Cisco路由器 ,使远端计算机用户可以在任何地方通过廉价的IS DN或模拟电话拨号连接到企业内部局域网 ,实现远程网络维护、远程办公和开展业务等功能