Application of a molecularly imprinted polymer for the effective recognition of different anti-epidermal growth factor receptor inhibitors

A molecularly imprinted polymer (MIP) was prepared using (E)-piceatannol, a natural potential anti-epidermal growth factor receptor (EGFR) inhibitor, as the template and 4-vinylpyridine as the functional monomer. The template was isolated from a Chinese traditional Tibetan medicinal herb, Caragana jubata, by a solid-phase extraction procedure. The crude extract of this herb was loaded on the MIP column for the binding test, and two different compounds besides the template itself were specifically recognized by the polymer, which were identified to be butein and quercetin possessing potent anti-EGFR tyrosine kinase activities with IC(50) values of 10 and 15 microM, respectively. Affinity and selectivity for these inhibitors and another three compounds coexisting with the template in this herb were evaluated in the chromatographic mode. For the first time, the affinity of a molecularly imprinted polymer was investigated to be correlative to the bioactivities of the analytes. The chromatographic behavior of the analytes was consistent with their activity values: the more active inhibitor was retained longer on the MIP. This research work afforded us a new approach for the effective recognition of novel anti-EGFR inhibitors from herbs by using the MIP as the receptor mimic to assay the bioactivities of reserved components, which will be very helpful in the direct separation of lead candidates for anticancer drugs.     

Chemical grafting of molecularly imprinted homopolymers to the surface of microplates. Application of artificial adrenergic receptor in enzyme-linked assay for beta-agonists determination

A technique for coating of microplate wells with a molecularly imprinted polymer (MIP), specific for epinephrine, is presented. 3-Aminophenylboronic acid was polymerized in the presence of epinephrine using oxidation of the monomer by ammonium persulfate. This process resulted in the grafting of a thin polymer layer onto the polystyrene surface of the microplates. The polymer affinity was determined by an enzyme-linked assay using a conjugate of horseradish peroxidase and norepinephrine (HRP-N). It was found that imprinting resulted in increased affinity of the polymer toward HRP-N and epinephrine. Influence of the buffer pH and concentration on the polymer affinity was analyzed. It was shown that the MIP-coated microplates could be used for assay development and drug screening. The high stability of the polymers and good reproducibility of the measurements make MIP coating an attractive alternative to traditional antibodies or receptors, used in ELISA.     

Method for synthesis and screening of large groups of molecularly imprinted polymers

A technique for the synthesis of molecularly imprinted polymers (MIPs) in small scale (～55 mg) coupled with direct in situ processing and batch rebinding evaluation is reported. The primary assessment is based on quantification by HPLC or UV absorbance measurement of the amount of template released from the polymer in a given solvent. This method allows a rapid screening of the parameters of importance to reach a desired level of binding affinity capacity and selectivity for a given target molecule. This was demonstrated for the triazine herbicide terbutylazine, where an initial screening was performed for the type of functional monomer used in the MIP preparation. Thus among the six functional monomers tested, methyl methacrylate, 4-vinylpyridine, and N-vinyl-α-pyrrolidone led to rapid and quantitative extraction whereas methacrylic acid and (trifluoromethyl)acrylic acid led to polymers that retained the template the most. After having established useful functional monomers, a secondary screening for selectivity was performed. In this, nonimprinted blank polymers were prepared and a normal batch rebinding evaluation was performed. The polymer showing the highest selectivity was the one prepared using methacrylic acid as functional monomer. This polymer was shown to strongly retain chlorotriazines including atrazine when a normal-scale batch of the polymer was evaluated in chromatography.     

X-Ray Photoelectron Spectroscopy characterization of electrosynthesized poly(3-thiophene acetic acid) and its application in Molecularly Imprinted Polymers for atrazine

X-Ray Photoelectron Spectroscopy (XPS) was used to extensively investigate the chemical structure of electrosynthesized poly(3-thiophene acetic acid). The observation of the integrity of carboxylic functionalities upon polymerization, along with the strong affinity between monomer and the herbicide atrazine (At) evidenced by Nuclear Magnetic Resonance, prompted the exploitation of the application of the electrosynthesized polymer in the preparation of a Molecularly Imprinted Polymer (MIP) for At. Experimental conditions for film electrosynthesis in the presence of template (At) were selected. XPS spectroscopy was used also for the characterization of the imprinted film, evidencing the entrapment of the template in polymer matrix and the removal of most template upon washing. Moreover, XPS results about the use of a cross-linking agent (3,3-bithiophene) for prospective improvement of MIP structural integrity are illustrated.     

Electrosynthesis of molecularly imprinted polypyrrole for the antibiotic levofloxacin

The development of an electrosynthesized imprinted polypyrrole (PPY) film onto a platinum sheet as sorbent phase for a fluoroquinolone antibiotic (levofloxacin) is described. Experimental conditions for the electropolymerization of PPY in the presence of the template were optimized. The molecularly imprinted polymer (MIP) film was characterized by X-Ray Photoelectron Spectroscopy (XPS) to verify the template entrapment in the polymeric matrix. After being subject to washing procedures, MIP was analyzed by XPS and a very satisfactory template removal was estimated being equal to 83%. The effectiveness of washing protocol was assessed also by UV-vis and High Performance Liquid Chromatography (HPLC) analysis of corresponding washing solutions. Rebinding experiments were performed by exposing the imprinted PPY film to levofloxacin solutions, subsequently analyzed by HPLC. The effect of solvent and time of exposure was investigated. The imprinting effect was verified by comparing recognition abilities of both MIP and not imprinted polymer (a polymer prepared in the same conditions but in the absence of the template).     

Adsorption on molecularly imprinted polymers of structural analogues of a template. Single-component adsorption isotherm data

The equilibrium adsorption isotherms on two otherwise identical polymers, one imprinted with Fmoc-L-tryptophan (Fmoc-L-Trp) (MIP), the other nonimprinted (NIP), of compounds that are structural analogues of the template were acquired by frontal analysis (FA) in an acetonitrile/acetic acid (99/1 v/v) mobile phase, over a wide concentration range (from 0.005 to 50 mM). These analogues were Fmoc-L-tyrosine, Fmoc-L-serine, Fmoc-L-phenyalanine, Fmoc-glycine (Fmoc-Gly), Fmoc-L-tryptophan pentafluorophenyl ester (Fmoc-L-Trp(OPfp)), and their antipodes. These substrates have different numbers of functional groups able to interact with the 4-vinylpyridine groups of the polymer. For a given number of the functional groups, these substrates have different hydrophobicities of their side groups (as indicated by their partition coefficients (log P(ow)) in the octanol-water system (e.g., from 4.74 for Fmoc-Trp to 2.53 for Fmoc-Gly)). Statistical results from the fitting of the FA data to Langmuirian isotherm models, the calculation of the affinity energy distribution, and the comparison of calculated and experimental band profiles show that all these sets of FA data are best accounted for by a tri-Langmuir isotherm model, except for the data of Fmoc-L-Trp(OPfp) that are best modeled by a simple Langmuir isotherm. So, all compounds but Fmoc-L-Trp(OPfp) find three different types of adsorption sites on both the MIP and the NIP. The properties of these different types of sites were studied systematically. The results show that the affinity of the structural analogues for the NIP is controlled mostly by the number of the functional groups on the substrates and somewhat by the hydrophobicity of their side groups. These two factors control also the MIP affinity toward the enantiomers of the structural analogues that have a stereochemistry different from that of the template. In contrast, the affinity of the highest affinity sites of the MIP toward the enantiomers of these structural analogues that have the same stereochemistry as the template is highest for the imprinted molecule (Fmoc-L-Trp). The separation of the template from the substrates with the same stereochemistry is influenced by the number of the functional groups on the substrates that can interact with the highest affinity sites on the MIP. The separation of the enantiomers of the analogues of the substrates was also achieved on the MIP, and these enantiomeric separations are influenced by the hydrophobicity of the substrates.     

Data on the structure and recognition properties of the template-selective binding sites in semi-IPN-based molecularly imprinted polymer membranes

Data on the structure and recognition properties of the template-selective binding sites in molecularly imprinted polymer membranes are presented. Porous molecularly imprinted polymer membranes based on semi-interpenetrating polymer networks (semi-IPN) were synthesized using the method of molecular imprinting in a combination with the method of computational modeling. Methacrylic acid, itaconic acid, and acrylamide were identified as optimal functional monomers for a model template — atrazine. Optimal ratios between atrazine and functional monomers as well as their binding energies were determined using the method of computational modeling and compared with the experimental data on the adsorbtion capability of porous molecularly imprinted polymer membranes. The factors influencing quality of the template-binding sites in MIP membranes (binding energy template-functional monomer and the number of functional groups taking part in the recognition of the template molecule) were revealed. The computational atrazine-selective membranes were capable of highly-selective and effective adsorbtion of atrazine from its 10^− 9–10^− 4 M aqueous solutions, and were characterized by high stability during prolonged storage. The apparent structure of the synthetic mimics of biological receptors to triazine herbicides was compared with the structure of their natural counterparts.     

Polymeric receptors for the recognition of folic acid and related compounds via substructure imprinting

A range of 2-acrylamidopyridines, showing subtle differences in solution binding toward carboxylic acids, has been investigated as functional monomers in molecular imprinting. Imprinting of N-Z-L-glutamic acid with one such monomer is shown to be effective in the creation of a molecularly imprinted polymer (MIP) with recognition properties for its template and also for larger molecules containing glutamic acid residues. In comparison to a MIP prepared via a more "traditional" approach, the new polymeric receptors exhibit reduced nonspecific binding. The new receptors are compared with previously reported urea-based receptors targeting the glutamic acid residue and receptors targeting the pteridine substructure of folic acid.     

Extraction and purification of penicillin G from fermentation broth by water-compatible molecularly imprinted polymers

Highly selective molecularly imprinted polymer (MIP) was synthesized by using methacrylic acid as functional monomer, trimethylolpropane trimethacrylate as cross-linker, chloroform as porogen and penicillin G potassium as template molecule. These imprinted polymers were used as solid-phase extraction sorbent for the selective extraction of penicillin G from the fermentation broth samples. Various parameters affecting the extraction efficiency of the MIP particles such as; effects of pH, wash and eluent solutions were evaluated. Molecular recognition properties and selectivity of these MIPs were estimated and the obtained results revealed high affinity for the target antibiotic. Equilibrium binding experiments were done to assess the performance of the MIP relative to non imprinted polymer (NIP). After optimizing the extraction parameters in molecularly imprinted solid-phase extraction (MISPE), successful imprinting was confirmed by comparison of the recoveries from the fermentation broth, ranging between 24–26% (RSD 4.1–4.5%, n = 4) for the NIPs and 83–88% (RSD 3.1–3.4%, n = 4) for the MIPs.     

Novel critical point drying (CPD) based preparation and transmission electron microscopy (TEM) imaging of protein specific molecularly imprinted polymers (HydroMIPs)

We report the transmission electron microscopy (TEM) imaging of a hydrogel based molecularly imprinted polymer (HydroMIP) specific to the template molecule bovine haemoglobin (BHb). A novel critical point drying based sample preparation technique was employed to prepare the molecularly imprinted polymer (MIP) samples in a manner that would facilitate the use of TEM to image the imprinted cavities, and provide an appropriate degree of both magnification and resolution to image polymer architecture in the <10 nm range. For the first time, polymer structure has been detailed that tentatively suggests molecularly imprinted cavities, ranging from 5 to 50 nm in size, that correlate (in terms of size) with the protein molecule employed as the imprinting template. The modified critical point drying sample preparation technique used may potentially play a key role in the imaging of all molecularly imprinted polymers, particularly those prepared in the aqueous phase.     

Scintillation proximity assay using molecularly imprinted microspheres

Molecularly imprinted microspheres were prepared as antibody binding mimics and used in scintillation proximity assay of a beta-adrenergic antagonist, (S)-propranolol. By using small polymer beads, we were able to place an organic scintillator and an "antenna" component in close proximity to the imprinted binding sites. When the radioactive template bound to the polymer, radiation energy was effectively transferred, via the antenna component, to the scintillator to generate a fluorescence signal. Using molecularly imprinted microspheres instead of antibodies, we have demonstrated competitive scintillation proximity assays for (S)-propranolol in both organic and aqueous solvents. The experimental results were further validated by normal ligand binding analysis, where liquid scintillation counting was used for quantification.     

Computer-assisted design and synthesis of a highly selective smart adsorbent for extraction of clonazepam from human serum

A computational approach was applied to screen functional monomers and polymerization solvents for rational design of molecular imprinted polymers (MIPs) as smart adsorbents for solid-phase extraction of clonazepam (CLO) form human serum. The comparison of the computed binding energies of the complexes formed between the template and functional monomers was conducted. The primary computational results were corrected by taking into calculation both the basis set superposition error (BSSE) and the effect of the polymerization solvent using the counterpoise (CP) correction and the polarizable continuum model, respectively. Based on the theoretical calculations, trifluoromethyl acrylic acid (TFMAA) and acrylonitrile (ACN) were found as the best and the worst functional monomers, correspondingly. To test the accuracy of the computational results, three MIPs were synthesized by different functional monomers and their Langmuir–Freundlich (LF) isotherms were studied. The experimental results obtained confirmed the computational results and indicated that the MIP synthesized using TFMAA had the highest affinity for CLO in human serum despite the presence of a vast spectrum of ions.     

Stereoselective Release Behaviors of Imprinted Bead Matrices

ABSTRACT

In this work, the stereoselective release behaviors of “low”-swelling molecularly imprinted polymer (MIP) bead matrices in pressed-coat tablet type were studied. Either R-propranolol selective MIP or S-propranolol selective MIP was combined with excipients and racemic propranolol and fabricated into the matrix. Subsequently, the release of different propranolol enantiomers from the matrices was examined. Also, the microscopic structure of the hydrated “low”-swelling MIP matrix was determined using a cryogenic scanning electron microscope in order to compare with that of the hydrated “high”-swelling MIP matrix. In vitro release profiles of the “low”-swelling matrices showed a difference in the release of enantiomers, in that the non-template isomer was released faster than the template isomer. However, in the last phase of dissolution this difference reduced and later reversed, resulting at last in the type of specificity being similar to that obtained previously with “high”-swelling MIP matrices.

n summary, MIP beads can be fashioned into matrices and incorporated into different formulations to regulate the resultant stereoselectivity. From the behaviors of stereoselective release observed in MIP matrices, we can conclude that the enantioselective-controlled delivery mechanism of MIPs via formulations depends on the relative affinity of the enantiomer for the template sites, as well as the nature of the polymer, such as hydrophobicity and swellability.     

单一结合位点分子印迹聚合物的合成及性能

采用分子自组装印迹技术在光引发条件下制备了以(S)-布洛芬为模板分子,α-甲基丙烯酸为功能单体的分子印迹聚合物。通过红外对聚合物的结构进行了表征。透射电镜结果表明,交联剂用量对印迹聚合物的形貌特征具有显著的影响。同时结合Scatchard分析研究了印迹聚合物的吸附性能及选择性识别能力,表明印迹聚合物特异性吸附容量为41μmol/g,印迹指数为2.28,对(S)-布洛芬形成单一结合位点,且表现出明显的吸附选择性。     

Affinitive separation and on-line identification of antitumor components from Peganum nigellastrum by coupling a chromatographic column of target analogue imprinted polymer with mass spectrometry

A coupled LC-MS (liquid-phase chromatography and mass spectrometry) system consisting of a combination of a column of molecularly imprinted polymer (MIP) and a MS detector was used for affinitive separation and on-line identification of the antitumor components, harmine and harmaline, from the methanol extract of Peganum nigellastrum seeds. Three molecularly imprinted polymers were synthesized with porogens bearing different hydrogen bonding capacities with harman, the structural analogue of harmaline, and harmine as the template. The affinity and selectivity of the anti-harman MIPs for the targets, harmine and harmaline, were investigated chromatographically, and the influences of the porogens and sample loads on the retention of the target compounds were also discussed. In addition, the target binding capacities of the MIPs were evaluated by frontal chromatography. When the MIPs were further used in a LC-MS system to separate the extract of herb, it was observed that imprinting with different porogens would cause the MIPs to exhibit different tendencies to adsorb the matrix components from the herb. Though the MIP prepared with a porogen of less hydrogen bonding capacity possessed higher selectivity and stronger affinity for the targets, matrix components in the herb extract interfered with the chromatographic performance more seriously when it was used as the LC solid phase in the LC-MS system for selective extraction of harmaline and harmine from the crude herb extract. Positively, the MIPs were stable and reproducible in the separation test, and the imprinting columns could efficiently separate the antitumor components from the herb extract after the sample was simply pretreated. The work in this paper would be helpful for the further extraction and identification of certain pharmacophoric compounds in herbs by a LC-MS system using MIPs as the HPLC solid phase.     

Molecularly imprinted polymers as antibody mimics in automated on-line fluorescent competitive assays

An automated molecularly imprinted sorbent based assay (MIA) for the rapid and sensitive analysis of penicillin-type beta-lactam antibiotics (BLAs) has been developed and optimized. The polymers were prepared using penicillin G procaine salt as template (PENGp) and a stoichiometric quantity of a urea-based functional monomer to target the single oxyanionic species in the template molecule. Highly fluorescent competitors (emission quantum yields of 0.4-0.95), molecularly engineered to contain pyrene labels while keeping intact the 6-aminopenicillanic acid moiety for efficient recognition by the cross-linked polymers, have been tested as analyte analogues in the competitive assay. Pyrenemethylacetamido penicillanic acid (PAAP) was the tagged antibiotic providing for the highest selectivity when competing with PenG for the specific binding sites in the molecularly imprinted polymer (MIP). Upon desorption from the MIP, the emission signal generated by the PAAP was related to the antibiotic concentration in the sample. The 50% binding inhibition concentration of penicillin G standard curves was at 1.81 x 10(-6) M PENG, and the detection limit was 1.97 x 10(-7) M. The sensor showed a dynamic range (normalized signal in the 20 to 80% range) from 6.80 x 10(-7) to 7.21 x 10(-6) M (20-80% binding inhibition) PENG in acetonitrile:HEPES buffer 0.1 M at pH 7.5 (40:60, v/v) solutions. Competitive binding studies demonstrated various degrees of cross-reactivity with penicillin-type beta-lactam antibiotics such as ampicillin (71%), oxacillin (66%), penicillin V (56%), amoxicillin (13%), and nafcillin (46%) and a lower response to other isoxazolyl penicillins such as cloxacillin (27%) and dicloxacillin (16%). The total analysis time was 14 min per determination, and the MIP reactor could be reused for more than 150 cycles without significant loss of recognition. The automatic MIA has been successfully applied to the direct analysis of penicillin G in spiked urine samples with excellent recoveries (mean value 92%). Results displayed by comparative analysis of the optimized MIA with a chromatographic procedure for penicillin G showed excellent agreement between both methods.     

Design of Synthetic Polymer Nanoparticles that Capture and Neutralize a Toxic Peptide

Designed polymer nanoparticles (NPs) capable of binding and neutralizing a biomacromolecular toxin are prepared. A library of copolymer NPs is synthesized from combinations of functional monomers. The binding capacity and affinity of the NPs are individually analyzed. NPs with optimized composition are capable of neutralizing the toxin even in a complex biological milieu. It is anticipated that this strategy will be a starting point for the design of synthetic alternatives to antibodies.     

Stereoselective release behaviors of imprinted bead matrices

In this work, the stereoselective release behaviors of “low”-swelling molecularly imprinted polymer (MIP) bead matrices in pressed-coat tablet type were studied. Either R-propranolol selective MIP or S-propranolol selective MIP was combined with excipients and racemic propranolol and fabricated into the matrix. Subsequently, the release of different propranolol enantiomers from the matrices was examined. Also, the microscopic structure of the hydrated “low”-swelling MIP matrix was determined using a cryogenic scanning electron microscope in order to compare with that of the hydrated “high”-swelling MIP matrix. In vitro release profiles of the “low”-swelling matrices showed a difference in the release of enantiomers, in that the non-template isomer was released faster than the template isomer. However, in the last phase of dissolution this difference reduced and later reversed, resulting at last in the type of specificity being similar to that obtained previously with “high”-swelling MIP matrices.

n summary, MIP beads can be fashioned into matrices and incorporated into different formulations to regulate the resultant stereoselectivity. From the behaviors of stereoselective release observed in MIP matrices, we can conclude that the enantioselective-controlled delivery mechanism of MIPs via formulations depends on the relative affinity of the enantiomer for the template sites, as well as the nature of the polymer, such as hydrophobicity and swellability.     

Selective electrochemical detection of dopamine based on molecularly imprinted poly(5-amino 8-hydroxy quinoline) immobilized reduced graphene oxide

The dopamine-imprinted conducting polymer film of 5-amino 8-hydroxy quinoline (AHQ) was electrodeposited on reduced graphene oxide (rGO)-modified glassy carbon (GC) electrode and was applied as a molecular recognition element for the selective determination of dopamine. The molecularly imprinted polymer (MIP)-modified electrode showed an excellent affinity towards dopamine due to the presence of imprinted site through hydrogen bonding interaction between dopamine and poly (AHQ) membrane. The molecular recognition ability of MIP-modified electrode was analyzed by cyclic voltammetric and differential pulse voltammetric techniques. The most stable geometry of the template–monomer complex in the pre-polymerization mixture was calculated by computational approaches. The rGO modification augmented both surface area and electron transfer kinetics of the bare electrode. The GC/rGO/MIP electrode possessed 2.83 fold current enhancements when compared to GC/MIP electrode, indicating the improvement in sensitivity due to rGO modification. The limit of detection and sensitivity of GC/rGO/MIP electrode was observed to be 32.7 nM and 13.3 AM^?1 cm^?2, respectively. The imprinting methodology provided an exceptional selectivity towards the detection of dopamine even in the presence of high concentration of possible physiological interferents. Moreover, the fabricated electrode was successfully employed for the detection of dopamine in human blood plasma samples proving the effectiveness of the sensor for the sensitive detection of dopamine from real samples.     

Ascorbic acid sensor based on molecularly imprinted polymer-modified hanging mercury drop electrode

Ascorbic acid sensor based on molecularly imprinted polymer (MIP) is reported for sensitive and selective analysis, without any cross-reactivity or matrix effect, in aqueous, blood serum and pharmaceutical samples. The sensor was developed by the direct coating of ascorbic acid-imprinted polymer, prepared from melamine and chloranil, on the surface of a hanging mercury drop electrode (HMDE) at + 0.4 V (vs. Ag/AgCl). The molecular recognition of ascorbic acid was highly specific using non-covalent (hydrophobically driven hydrogen-bonding and electrostatic) interactions. The analyte was preconcentrated and oxidised instantaneously in the imprinted polymer layer giving voltammetric signal on cathodic stripping at optimised operational conditions: accumulation potential + 0.4 V (vs. Ag/AgCl), polymer deposition time 120 s, template accumulation time 120 s, pH 7.0, scan rate 10 mV s^? 1, pulse amplitude 25 mV. The proposed MIP sensor is able to enhance sensitivity substantially so as to detect serum ascorbic acid level as low as 0.26 ng mL^? 1 (R.S.D. 0.5%, S/N 3) for the diagnosis of hypovitaminosis C (Vitamin C deficiency).