Evidence of Strict Stereospecificity in the Structure of sn‐1,2‐Diacyl‐3‐Acetyl‐Glycerols from Euonymus maximowiczianus Seeds Using Nuclear Magnetic Resonance Spectroscopy

Asymmetric, optically active sn‐1,2‐diacyl‐3‐acetyl‐glycerols (AcDAG) have been known to scientists for several decades. However, to date, the problem of their structure has not been definitely resolved, which has led to a vast diversity of terms used for their designation in the literature. Using two‐dimensional nuclear magnetic resonance, we have investigated AcDAG from the mature seeds of Euonymus maximowiczianus, from which we have been able to both identify a correlation of the methyl group in acetic acid residue with protons at the carbon atom at sn‐3 position in the glycerol residue of the AcDAG molecule and, for the first time, demonstrate that this correlation is observed exclusively with one carbon atom at the α‐position, but not with two as would have been expected in case of a racemic mixture. Moreover, results of our analysis of AcDAG isolated from the seeds of E. maximowiczianus directly confirm that diacylglycerol‐3‐acetyl‐transferase is responsible for their biosynthesis, which reveals a strict specificity not only to acetyl‐CoA as one of the substrates but also to the sn‐3‐position of the glycerol residue in sn‐1,2‐diacylglycerol during their biosynthesis.     

Poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)– poly(dimethylsiloxane) block copolymers

The hydrolytic condensation of 1,3‐dichloro‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane under neutral conditions produced α'ω‐dihydroxy‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane (polymerization degree ≈ 4). The homofunctional condensation of α'ω‐dihydroxy‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane in a toluene solution and in the presence of activated carbon was performed, and dihydroxy‐containing oligomers with various degrees of condensation were obtained. Through the heterofunctional condensation of dihydroxy‐containing oligomers with α'ω‐dichlorodimethylsiloxanes in the presence of amines, corresponding block copolymers were obtained. Gel permeation chromatography, differential scanning calorimetry, thermomechanical analysis, thermogravimetry, and wide‐angle roentgenography investigations were carried out. Differential scanning calorimetry and roentgenography studies of the block copolymers showed that their properties were determined by the ratio of the lengths of the flexible and linear poly(dimethylsiloxane) and rigid poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane) fragments in the macromolecular chain. At definite values of the lengths of the flexible and rigid fragments, a microheterogeneous structure was observed in the synthesized block copolymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1409–1417, 2002; DOI 10.1002/app.10335     

Poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane‐poly(dimethylsiloxane) block copolymers

The heterofunctional condensation of 1,3‐dichloro‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane with dihydroxydiphenylsilane at various ratios of initial compounds in the presence of amines was carried out, and α,ω‐dihydroxy(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane oligomers with various degrees of condensation were obtained. Corresponding block copolymers were obtained by heterofunctional polycondensation of synthesized α,ω‐dihydroxy(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane oligomers with α,ω‐dichlorodimethylsiloxanes in the presence of amines. Thermogravimetry, gel permeation chromatography, differential scanning calorimetry, and wide‐angle X‐ray analysis were carried out on the synthesized block coplymers. Differential scanning calorimetry and wide‐angle X‐ray studies of these copolymers showed that their properties were determined by the ratio of the lengths of the flexible linear poly(dimethylsiloxane) and rigid poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane fragments in the main macromolecular chain. Two‐phase systems were obtained with specific flexible and rigid fragment length values in synthesized block copolymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3462–3467, 2006     

Identification of n‐6 Monounsaturated Fatty Acids in Acer Seed Oils

Seed oils from Acer species are a potential source of the nutraceutical fatty acids, nervonic acid (cis‐15‐tetracosenoic acid, NA), and γ‐linolenic acid (cis‐6,9,12‐octadecatrienoic acid, GLA). To further characterize the genus, seed fatty acid content and composition were determined for 20 species of Acer. Fatty acid content ranged from 8.2% for Acer macrophyllum to over 36% for A. mono and A. negundo. The presence of very‐long‐chain fatty acids (VLCFA), with chain length of 20‐carbons or greater, and GLA were characteristic features of the seed oils. In all species, erucic acid (cis‐13‐docosenoic acid, EA) was the predominant VLCFA with the highest level of NA being only 8.6% in A. olivianum. Regioselective lipase digestion demonstrated that VLCFA are largely absent from the sn‐2 position of seed triacylglycerol, whereas GLA is primarily located at this position. Five Acer species contained low levels (<2%) of cis‐12‐octadecenoic acid and cis‐14‐eicosenoic acid, uncommon n‐6 fatty acids not previously reported from Acer.     

Crystallization behavior of 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol and 1‐palmitoyl‐2,3‐dioleoyl‐glycerol

A model margarine was stored under a temperature fluctuation cycle of 5—20 °C until granular crystals were observed. Using information obtained from the granular crystals, the crystallization behaviors of major triacylglycerols of palm oil, 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol (POP), 1‐palmitoyl‐2,3‐dioleoyl‐glycerol (POO), and their mixtures were then investigated. It was shown that in the model margarine, the POP content in the granular crystals was higher than in their surrounding materials, and the X‐ray diffraction pattern of the granular crystals revealed that they were the most stable polymorph, β. 99% pure POP, POO, and their mixtures were then stored under the above‐mentioned temperature cycle. POP was found to form the unstable polymorph, α, when cooled rapidly from the melt. Within 24 hours transformation into the γ polymorph and then into the β polymorph was observed. POO was shown to transform into the β' polymorph from α. When POP and POO were mixed, the β polymorph did not emerge, instead it was shown that POP and POO were both agglomerated in the mixtures, giving rise to the formation of granular crystals.     

An Engineered Biocatalyst for the Synthesis of Glycoconjugates: Utilization of β1,3‐N‐Acetyl‐D‐glucosaminyltransferase from Streptococcus agalactiae Type Ia Expressed in Escherichia coli as a Fusion with Maltose‐Binding Protein

A fusion protein composed of β1,3‐N‐acetyl‐D ‐glucosaminyltransferase (β1,3‐GlcNAcT) from Streptococcus agalactiae type Ia and maltose‐binding protein (MBP) was produced in Escherichia coli as a soluble and highly active form. Although this fusion protein (MBP‐β1,3‐GlcNAcT) did not show any sugar‐elongation activity to some simple low‐molecular weight acceptor substrates such as galactose, Galβ(1→4)Glc (lactose), Galβ(1→4)GlcNAc (N‐acetyllactosamine), Galβ(1→4)GlcNAcβ(1→3)Galβ(1→4)Glc (lacto‐N‐tetraose), and Galβ(1→4)GlcβCer (lactosylceramide, LacCer), the multivalent glycopolymer having LacCer‐mimic branches (LacCer mimic polymer, LacCer primer) was found to be an excellent acceptor substrate for the introduction of a β‐GlcNAc residue at the O‐3 position of the non‐reducing galactose moiety by this engineered enzyme. Subsequently, the polymer having GlcNAcβ(1→3)Galβ(1→4)Glc was subjected to further enzymatic modifications by using recombinant β1,4‐D ‐galactosyltransferase (β1,4‐GalT), α2,3‐sialyltransferase (α2,3‐SiaT), α1,3‐L ‐fucosyltransferase (α1,3‐FucT), and ceramide glycanase (CGase) to afford a biologically important ganglioside; Neu5Aα(2→3)Galβ(1→4)[Fucα(1→3)]GlcNAcβ(1→3)Galβ(1→4)GlcCerα(IV3Neu5Acα,III3Fucα‐nLc4Cer) in 40% yield (4 steps). Interestingly, it was suggested that MBP‐β1,3‐GlcNAcT could also catalyze a glycosylation reaction of the LacCer mimic polymer with N‐acetyl‐D ‐galactosamine served from UDP‐GalNAc to afford a polymer carrying trisaccharide branches, GalNAcβ(1→3)Galβ(1→4)Glc. The versatility of the MBP‐β1,3‐GlcNAcT in the practical synthesis was preliminarily demonstrated by applying this fusion protein as an immobilized biocatalyst displayed on the amylose resin which is known as a solid support showing potent binding‐affinity with MBP.     

Preparation of 1,3‐Diazido‐2‐Nitro‐2‐Azapropane from Urea

An alternative method to prepare 1,3‐diazido‐2‐nitro‐2‐azapropane (DANP), a promising liquid component for high‐energy condensed systems, is suggested and involves the following stages: (i) nitration of urea, (ii) condensation of the nitration product with formaldehyde, (iii) acylation (chlorination) of 1,3‐dihydroxy‐2‐nitro‐2‐azapropane, (iv) chlorination of 1,3‐diacetoxy‐2‐nitro‐2‐azapropane, and (v) azidation of the dichloro derivative to DANP. This synthesis method is selective and enables isolation of 1,3‐diazido‐2‐nitrazapropane devoid of impurities.     

Asymmetric Aldol Reaction of 3‐Acetyl‐2H‐chromen‐2‐ones and Isatins Catalyzed by a Bifunctional Quinidine Urea Catalyst

The asymmetric aldol reaction of 3‐acetyl‐2H‐chromen‐2‐ones and isatins has been realized by using a bifunctional quinidine‐derived urea as the catalyst. The corresponding 3‐hydroxyoxindole derivatives containing a 2H‐chromen‐2‐one moiety were obtained in good yields and high enantioselectivities. When (Z)‐ethyl 2‐benzylideneacetoacetate was used as the substrate, a mixture of two diastereomers (both Z and E) was obtained due to isomerization of the double bond under the reaction conditions.

     

Enzymatic Synthesis of 1‐Alkyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate Using a Novel Lysoplasmalogen‐Specific Phopholipase D

Many phospholipase Ds (PLDs) are known to catalyze transphosphatidylation as well as hydrolysis of phospholipids. Transphosphatidylation of lysoplasmalogen (LyPls)‐specific phospholipase D (LyPls‐PLD), which catalyzes hydrolysis of ether lysophospholipids such as LyPls and 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine (Lyso‐PAF), still remains unclear. This study aims to reveal the transphosphatidylation activity of LyPls‐PLD, that is, the production of cyclic ether lysophospholipid. The enzymatic reaction is conducted in a buffer system, and the reaction products of a novel LyPls‐PLD from Thermocrispum sp. are investigated using mass spectrometry (MS). MS analyses demonstrate the reaction products to consist of 100% 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate (cLyPA) and choline from Lyso‐PAF; however, 1‐alkenyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate from 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine and 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphoethanolamine is not produced. These results are expected to help in elucidating the catalytic mechanism of LyPls‐PLD, that is, the rate‐limiting step, and indicate LyPls‐PLD to be useful for the one‐pot synthesis of cLyPA. Practical Applications: A novel phospholipase D, LyPls‐PLD, can exclusively synthesize cLyPA from Lyso‐PAF using a one‐step enzymatic reaction without an organic solvent. cLyPA could be expected to show bioactivities similar to those of cyclic phosphatidic acid, which promotes normal cell differentiation, hyaluronic acid synthesis, antiproliferative activity in fibroblasts, and inhibitory activity toward cancer cell invasion and metastasis.     

Over‐expression of glycerol dehydrogenase and 1,3‐propanediol oxidoreductase in Klebsiella pneumoniae and their effects on conversion of glycerol into 1,3‐propanediol in resting cell system

BACKGROUND: Glycerol dehydrogenase [EC.1.1.1.6] and 1,3‐propanediol oxidoreductase [EC.1.1.1.202] were proved to be two of the key enzymes for glycerol conversion to 1,3‐propanediol in Klebsiella pneumoniae under anaerobic conditions. For insight into their significance on 1,3‐propanediol production under micro‐aerobic conditions, these two enzymes were over‐expressed in K. pneumoniae individually, and their effects on conversion of glycerol into 1,3‐propanediol in a resting cell system under micro‐aerobic conditions were investigated. RESULTS: In the resting cell system, over‐expression of 1,3‐propanediol oxidoreductase led to faster glycerol conversion and 1,3‐propanediol production. After a 12 h conversion process, it improved the yield of 1,3‐propanediol by 20.4% (222.1 mmol L⁻¹ versus 184.4 mmol L⁻¹) and enhanced the conversion ratio of glycerol into 1,3‐propanediol from 50.8% to 59.8% (mol mol⁻¹). Over‐expression of glycerol dehydrogenase in K. pneumoniae had no significant influence both on 1,3‐propanediol yield and on the conversion ratio of glycerol into 1,3‐propanediol in the resting cell system. CONCLUSION: The results were important for an understanding of the significance of glycerol dehydrogenase and 1,3‐propanediol oxidoreductase in 1,3‐proanediol production under micro‐aerobic conditions, and for developing better strategies to improve 1,3‐propanediol yield. Copyright © 2008 Society of Chemical Industry     

Gold‐Catalyzed Sequential Amination/Annulation Reactions of 2‐Propynyl‐1,3‐dicarbonyl Compounds

The gold(III)‐catalyzed sequential amination/annulation reaction of 2‐propynyl‐1,3‐dicarbonyl compounds 1 with primary amines 2 produces 1,2,3,5‐substituted pyrroles 4 in moderate to high yields.     

Polymerization of 1,3‐dienes containing functional groups: 8. Free‐radical polymerization of 2‐triethoxysilyl‐ 1,3‐butadiene

The presence of a bulky substituent at the 2‐position of 1,3‐butadiene derivatives is known to affect the polymerization behavior and microstructure of the resulting polymers. Free‐radical polymerization of 2‐triethoxysilyl‐1,3‐butadiene ( 1 ) was carried out under various conditions, and its polymerization behavior was compared with that of 2‐triethoxymethyl‐ and other silyl‐substituted butadienes. A sticky polymer of high 1,4‐structure ( ) was obtained in moderate yield by 2,2′‐azobisisobutyronitrile (AIBN)‐initiated polymerization. A smaller amount of Diels–Alder dimer was formed compared with the case of other silyl‐substituted butadienes. The rate of polymerization (R_p) was found to be R_p = k[AIBN]^0.5[ 1 ]^1.2, and the overall activation energy for polymerization was determined to be 117 kJ mol^?1. The monomer reactivity ratios in copolymerization with styrene were r ₁ = 2.65 and r_st = 0.26. The glass transition temperature of the polymer of 1 was found to be ?78 °C. Free‐radical polymerization of 1 proceeded smoothly to give the corresponding 1,4‐polydiene. The 1,4‐E content of the polymer was less compared with that of poly(2‐triethoxymethyl‐1,3‐butadiene) and poly(2‐triisopropoxysilyl‐1,3‐butadiene) prepared under similar conditions. Copyright © 2010 Society of Chemical Industry     

Effect of PUFA at sn‐2 position in dietary triacylglycerols on the fatty acid composition of adipose tissues in non‐ruminant farm animals

The influence of the distribution of polyunsaturated fatty acids on the glycerol backbone of dietary triacylglycerols on the fatty acid profile of adipose tissue and muscle phospholipids was investigated in growing‐finishing pigs (48) and broiler chicken (84). The animals were fattened on barley/soybean meal diets supplemented with a blend of soybean oil and beef tallow, either in the ratio 3:1 w/w (high‐PUFA) or 1:3 w/w (low‐ PUFA). Part of the high‐ and low‐PUFA blends was chemically interesterified to randomly distribute all fatty acids over the three positions of the glycerol. Thus, two sets of diets of identical overall fatty acid composition, but differing in the distribution of fatty acids in the triacylglycerols, were fed. Growth performance and carcass composition were neither affected by fatty acid composition nor by randomisation of dietary fats in either animal species. Apparent digestibility of energy was slightly lower in pigs fed the low‐PUFA blends. Fatty acid profile of subcutaneous fat of pigs and broilers as well as of internal body fat (lamina subserosa) and muscle phospholipids of pigs varied according to the dietary fatty acid composition but was not affected by randomisation of dietary fats. These findings are explained in terms of the hydrolysis of TAG during transport of lipids from enterocytes to adipose tissue cells and the continuous lipolysis and re‐esterification of fatty acids that take place in adipose tissue cells.     

Simultaneous refolding,purification, and immobilization of recombinant Fibrobacter succinogenes 1,3‐1,4‐β‐D‐glucanase on artificial oil bodies

BACKGROUND: 1,3‐1,4‐β‐D‐glucanase (1,3‐1,4‐β‐D‐glucan 4‐glucanohydrolase; EC 3.2.1.73) has been used in a range of industrial processes. As a biocatalyst, it is better to use immobilized enzymes than free enzymes, therefore, the immobilization of 1,3‐1,4‐β‐D‐glucanase was investigated. RESULTS: A 1,3‐1,4‐β‐D‐glucanase gene from Fibrobacter succinogenes was overexpressed in Escherichia coli as a recombinant protein fused to the N terminus of oleosin, a unique structural protein of seed oil bodies. With the reconstitution of the artificial oil bodies (AOBs), refolding, purification, and immobilization of active 1,3‐1,4‐β‐D‐glucanase was accomplished simultaneously. Response surface modeling (RSM), with central composite design (CCD), and regression analysis were successfully applied to determine the optimal temperature and pH conditions of the AOB‐immobilized 1,3‐1,4‐β‐D‐glucanase. The optimal conditions for the highest immobilized 1,3‐1,4‐β‐D‐glucanase activity (7.1 IU mg^?1 of total protein) were observed at 39 °C and pH 8.8. Furthermore, AOB‐immobilized 1,3‐1,4‐β‐D‐glucanase retained more than 70% of its initial activity after 120 min at 39 °C, and it was easily and simply recovered from the surface of the solution by brief centrifugation; it could be reused eight times while retaining more than 80% of its activity. CONCLUSIONS: These results indicate that the AOB‐based system is a comparatively simple and effective method for simultaneous refolding, purification, and immobilization of 1,3‐1,4‐β‐D‐glucanase. Copyright © 2009 Society of Chemical Industry     

Synthesis and biodegradability evaluation of 2‐methylene‐1,3‐dioxepane and styrene copolymers

Biodegradable copolymers of 2‐methylene‐1,3‐dioxepane (MDO) and styrene (ST) were synthesized by free‐radical copolymerization using di‐t‐butyl peroxide (DTBP) as the initiator. The copolymers containing ester units were characterized by Fourier transform infrared (FTIR), ¹H‐NMR, and ¹³C‐NMR spectroscopy. Their molecular weight and polydispersity index were determined by gel permeation chromatography (GPC). In vitro enzymatic degradation of poly(MDO‐co‐ST) was performed at 37°C in phosphate buffer solution (PBS, pH = 7.4) in the presence of Pseudomonas lipase or crude enzyme extracted from earthworm. The experiment showed that incorporating ester units into C? C backbone chain of polystyrene would result in a biodegradable copolymer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1146–1151, 2007     

The effect of raw glycerol concentration on the production of 1,3‐propanediol by Clostridium butyricum

Raw glycerol, the main by‐product of the bio‐diesel production process, was converted to 1,3‐propanediol by Clostridium butyricum F2b. In batch cultures, 47.1 g dm^?3 of 1,3‐propanediol were produced. Continuous cultures were conducted at a constant dilution rate (= 0.04 h^?1) and various inlet glycerol concentrations with 1,3‐propanediol produced at levels up to 44.0 g dm^?3. At increasing glycerol concentrations in the inlet medium, biomass yield decreased. This decrease was attributed to the microbial metabolism being directed towards the biosynthesis of organic acids (and hence carbon losses as CO₂) instead of biochemical anabolic reactions. An autonomous analytical model was developed, and quantified the effect of inlet glycerol concentration on the production of biomass and metabolites. Indeed, high inlet substrate concentrations positively affected the biosynthesis, principally of butyric acid and to a lesser extent that of acetic acid. In contrast, at increased glycerol concentrations, the relative increase of 1,3‐propanediol production per unit of substrate consumed was lower as compared with that of acetic and, mainly, butyric acid. This could be explained by the fact that the butyric acid pathway represents an alternative and competitive one to that of 1,3‐propanediol for re‐generation of NADH₂ equivalents in the microbial cell. Copyright © 2004 Society of Chemical Industry     

Synthesis of 1,3‐benzodioxole end‐functionalized polymers via reversible addition–fragmentation chain transfer polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization of styrene was carried out in the presence of a novel RAFT reagent, bearing 1,3‐benzodioxole group, benzo [1,3]dioxole‐5‐carbodithioic acid benzo [1,3]dioxol‐5‐ylmethyl ester (BDCB), to prepare end‐functionalized polystyrene. The polymerization results showed that RAFT polymerization of styrene could be well controlled. Number–average molecular weight (M_n(GPC)) increased linearly with monomer conversion, and molecular weight distributions were narrow (M_w/M_n < 1.4). The successful reaction of chain extension and analysis of ¹H NMR spectra confirmed the existence of the functional 1,3‐benzodioxole group at the chain‐end of polystyrene. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3535–3539, 2006     

Chiral N,N′‐Dioxide–Scandium(III)‐Catalyzed Asymmetric Epoxidation of 2‐Arylidene‐1,3‐diketones with Hydrogen Peroxide

The catalytic asymmetric epoxidation of 2‐arylidene‐1,3‐diketones using aqueous 30% H₂O₂ as oxidant has been successfully realized by a N,N′‐dioxide–scandium(III) triflate [Sc(OTf)₃] complex, giving the corresponding products in moderate to good yields (up to 85%) with excellent enantioselectivities (up to 99% ee) under mild reaction conditions without extra additives.