High-frequency dielectric properties of Mg-Al-Si,Ca-Al-Si and Y-Al-Si oxynitride glasses

Recently developed coaxial line techniques [1] have been used to determine, at room temperature, the values of the real () and imaginary (') parts of the dielectric constants for some Mg-Al-Si, Ca-Al-Si and Y-Al-Si oxynitride glasses over the frequency range 500 MHz to 5 GHz. The frequency dependencies of and ' are consistent with the universal law of dielectric response in that (-_t8)^(n–1) and '^(n–1) for all glass compositions; the high experimental value of the exponent (n=1.0±0.1) suggests the limiting form of lattice loss [2] situation. In this frequency range, as previously reported [3] at longer wavelengths, the addition of nitrogen increases the dielectric constant, (); in both the oxide and oxynitride glasses is also influenced by the cation, being increased with cation type in the order magnesium, yttrium, calcium as at lower frequencies.     

Breakup of an anomolously viscous liquid film in a centrifugal force field

An equation is obtained for the breakup radius with consideration of tipping moments and Laplacian pressure forces acting on the liquid ridge at the critical point.Notation K, n rhenological constants - density - surface tension - r current cup radius - R maximum cup radius - r_c critical radius for film breakup - ¯r=¯r=r/R dimensionless current radius - ¯r_c=r_c/R dimensionless critical radius - ₀, _c actual and critical film thicknesses - current thickness - R_r ridge radius - h₀ ridge height - h current ridge height - ₀ limiting wetting angle - current angle of tangent to ridge surface - angle between axis of rotation and tangent to cup surface - angular velocity of rotation - q volume liquid flow rate - v₁ and v meridional and tangential velocities - =4vv _lm/r,=4v_m/r dimensionless velocities - M moments of surface and centrifugal forces - M_v moment from velocity head - p_r pressure within ridge - P_vm pressure from velocity head - p_m, p_pm pressures from centrifugal force components tangent and normal to cup surface - deviation range of breakup radius from calculated value - ¯r_max, ¯r_min limiting deviations of breakup radius - _c angle of tangent to curve _c/°₀=f(¯r) at critical point - t random oscillation of ratio _c/_c Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 1, pp. 51–56, July, 1980.     

A gradient method of defining smooth solutions to inverse boundary-value problems in thermal conduction

An iterative algorithm is described for solving boundary-value inverse problems in thermal conduction by steepest descent, which utilizes information on the smoothness of the solution.Notation A, B linear operators - u element of solution space U - f exact reference data - f reference data uncertainty - value of reference data uncertainty - A^–1 inverse operator - u^(k)() k-th derivative of function u - _m length of observation interval - _i(t) polynomials of degree i–1 - A^*, B^*, L^* operators conjugate to the operators A, B, L - Jg discrepancy functional gradient - _n descent step along the discrepancy antigradient for the n-th iteration - K( –) kernel of integral equation - q() heat flux - T() measured temperature inside body Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 2, pp. 259–263, August, 1980.     

Phase transformations in permanent-mould-cast aluminium bronze

The phases obtained in aluminium bronze (Cu-10Al-4Fe) cast into a permanent mould were investigated. The parameters examined were the pre-heating temperature of the mould and the graphite coating thickness. The phases and ₂ were detected as well as the metastable phases and . The intermetallics of the system Fe-Al were obtained in various stoichiometric compositions. The different cooling rates of the casting resulted in two mechanisms of transformation to grains out of the unstable phase, one being nucleation and growth producing needle-shaped grains, the other exhibiting a massive transformation to spherical grains. These two mechanisms determine the changes in the size of the a grains as result of changes in the cooling rate in its various ranges.     

Spin hydrodynamic equations with external disturbances and suitable Green's functions for superfluid3He-B. New onsager relations

The spin hydrodynamic equations for superfluid³He-B have been obtained for the case of external, time-dependent fields. On the basis of a microscopic approach, expressions are found for additional terms in equations containing these fields. Considering the linear response of the system to the switching on of external fields, formulas are found for suitable Green's functions (magnetization-magnetization, rotation-rotation, magnetization-rotation, rotation-magnetization). The rotation-rotation Green's function has the 1/q ² singularity characteristic of superfluid systems. Connections between Green's functions lead to relations among kinetic coefficients v, ₁, and ₂. It is also shown that there is a conserved quantityQ ^(B) = div v _s ^(B) that describes sources or magnetic type charges (monopoles) of the superfluid velocity v _s ^(B) . Comparison with the phenomenological approach suggests thatQ ^(B) is proportional to a pseudoscalar giving the projection of the spin density onto the vector describing the axis of rotation.     

Relationship between the energy supply parameters and the physicochemical l characteristics of polymer compositions during drying and thermal processing

The effect of the type of energy supply on the formation of temperature and concentration fields in the thermal processing of polymer compositions is considered.Notation T₀, T initial and current temperature of the coating - T_m temperature of the air - =(T-T_o)/(T_m-T₀) dimensionless temperature of the coating - a thermal diffusivity - A absorption power of the coating - D diffusion coefficient - thermal conductivity - c thermal capacity - density - _k convective heat transfer coefficient - i number of moles of reacting groups per unit volume of polymer - K₀ factor in front of the exponential - R gas constant - u concentration - Q thermal effect of the reaction - q_n density of the incident radiant flux - =x/ dimensionless coordinate over the thickness of the coating - Ki=Aq_n /(T_m-T₀) Kirpichev criterion characterizing the thermal effect of the reaction - Ki_p=Qi/c (T_m-T₀) analog of the Predvoditelev criterion, characterizing the rate of occurrence of a chemical excess in the system - Bu= Bouguer criterion - Lu=D/a Lykov number - Fo=a/² Fourier number - Bi= _k Biot number Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 1, pp. 26–33, July, 1980.     

Transient heat conduction in hollow spheres with a moving inner boundary

The finite integral transform method is used to obtain the solution of unsteady heat conduction problems for a hollow sphere with a moving internal boundary and various boundary conditions at the outer surface. For the solution of the problems of interest integral transform formulas are presented with kernels (16), (20), and (24) and the corresponding inversion formulas (18), (22), (26), (29) and characteristic equations (17), (21), (25), (28), (31), (33).Nomenclature a, thermal diffusivity and conductivity - t temperature of phase transformation - density - heat transfer coefficient - Q total quantity of heat passing through inner boundary - F latent heat of phase transformation - Fo(1,)=a/R ₁ ² , Fo(i,)=/r _i ² , Fo(i, _i)=a _i/r _i ² Fourier numbers - Bi₂=R₂/ Biot number     

Some observations on the deformation characteristics of bulk polycrystalline zirconium hydrides

The deformation behaviour of bulk polycrystalline zirconium hydrides in the composition range ZrH_1.27 to ZrH_1.66 has been investigated by compressive loading at temperatures between room temperature and 500° C. Single-phase -zirconium hydride is brittle below 100° C. Analyses of slip traces on specimens deformed at temperatures between 100 and 250° C have shown that the glide planes are {111} types. The deformation characteristics of and ( + ) alloys at temperatures between 100 and 500° C are consistent with the hydrogen vacancies in the -phase providing significant lattice friction to the movement of dislocations in the zirconium lattice of the hydride structure. The room temperature fracture stress of ( + ) alloys increases with the volume fraction of the -phase and this can be related to the resistance offered by platelets to the propagation of cleavage cracks in the matrix. In a ( + + ) alloy the resistance to crack propagation at room temperature is further increased by the soft -zirconium phase.     

Types of superplasticm-δ curves of Ti-6Al-4V alloy and their intertransformation

The superplasticm- curves of Ti-6Al-4 alloy have been determined at different temperatures and strain rates; all were of them _L=m _max type, and were of either fundamental, descending or ascending types. The latter two types were transformed from the former through the processes ofm _Lm _O, _LO andm _Lm _F, _LF, respectively. The highest total elongation, _F, was 1150% obtained at 950C and 1.55×10^–3 s^–1. The Chin Liu equation has been applied to all types ofm- curves. The parameters characteristic of all types ofm- curves have been obtained and were found to vary with temperature and strain rate. The total elongation, _F, is determined by the resultant effects of all other parameters, not by a singlem value, theoretically considered to be constant and determined practically by a tensile strain of about 30%–50% (m _30%–50%) as usual.Nomenclature C (=k/k _o ) the normalized slope ofm- curve corresponding to - a material constant corresponding to - m strain-rate sensitivity index corresponding to - m _max maximum on them- curve corresponding to _L - m _min minimum on them- curve corresponding to _L - crosshead speed during the tensile test - the strain of the entire stretching process (has same significance as ordinarily adopted ) - _F total elongation at fracture chosen for the present work - _I intermediate strains including _I1, _I2, _I3, ..., _I(i–1), _Ii , _I(i+1), ..., chosen for the present work - _L limit strain separatingm- curves into sections - _O (=0) starting strain - strain rate - flow stress     

Heat conduction in a multilayer composite wedge

A new method for analytically solving a problem of steady-state heat conduction for multilayer composite wedge-shaped bodies is suggested based on a generalization of the integral Mellin transform.Notation T temperature - _rr, thermal conductivity coefficients - thickness of composite material layers (1) - N₁(), N ₂ ⁽¹⁾ (), N ₂ ⁽²⁾ () auxiliary local functions from the rapid variable =r/ - m(r, p) auxiliary function entering the core of the generalized integral Mellin transform - ₀ half of the wedge aperture angle Moscow Institute of Chemical Engineering. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 64, No. 4, pp. 487–491, April, 1993.     

Radiation of internal waves during vertical motion of a body through a nonuniform liquid

Energy losses to radiation of internal waves during the vertical motion of a point dipole in two-dimensional and three-dimensional cases are computed.Notation _o(z), p_o(z) density and pressure of the ground state - z vertical coordinate - v, p, perturbed velocity, pressure, and density - H(d 1n _o/dz)^–1 characteristic length scale for stratification - N=(gH^–1–g²c _o ^–2 )^1/2 Weisel-Brent frequency - g acceleration of gravity - c_o speed of sound - vertical component of the perturbed velocity - V vector operator - k wave vector - frequency - d vector surface element - W magnitude of the energy losses - (t), (r) (x)(y)(z) Dirac functions - v_o velocity of motion of the source of perturbations - d dipole moment of the doublet - _o,l length dimension parameters - _o intensity of the source Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 4, pp. 619–623, October, 1980.     

Inertia of measurements with “auxiliary-wall” type heat meters

The article examines the problem of thermal inertia on the basis of an auxiliary-wall type heat meter, it demonstrates the boundaries of applicability of the approximate relationship for calculating non-steady-state heat fluxes.Notation q() non-steady-state heat flux through the heat meter - _i,a _i thermal conductivity, thermal diffusivity, and thickness of the heat meter, respectively - ₂,a ₂ thermal conductivity and thermal diffusivity, respectively, of the base of the heat meter - t() temperature gradient over the thickness of the heat meter - index of thermal inertia - time - s parameter of Laplace transform - t₁ (x, ) temperature of the heat meter at point x - t₂(x, ) temperature of the base - t_c ambient temperature - Y_q(s) transfer function from the heat flux q() to the temperature gradient t() Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 2, pp. 298–305, August, 1980.     

Thermal conductivity of hydrocarbons in the naphthene group under high pressures

The thermal conductivity of hydrocarbons in the naphthene group has been experimentally determined. An equation is now proposed for calculating the thermal conductivity over the given temperature and pressure ranges.Notation thermal conductivity - ₂₀ and ₃₀ values of the thermal conductivity at 20 and 30°C, respectively - t₀,P₀ thermal conductivity at t₀, p₀ - _t p thermal conductivity at temperature t and under pressure P - change in thermal conductivity - P pressure - P_melt melting pressure - P₀ atmospheric pressure - t₀ 20°C temperature - T, t temperature - T_cr critical temperature - temperature coefficient of thermal conductivity - ₂₀ temperature coefficient of density - density - ₂₀ density at 20°C - _cr critical density - M molar mass - =T/T_cr referred temperature - v specific volume - v₀ specific volume at 20°C - v change in specific volume - _{3 0} a coefficient - B (t) a function of the temperature - S a quadratic functional - W_i, weight of the i-th experimental point - _i error of the i-th experimental value of thermal conductivity - B _{y, =0.6} value of B (t) at T = 0.6T_cr - B = B (t)/B_{, =0.6} referred value of coefficient B (t) Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 41, No. 3, pp. 491–499, September, 1981.     

Inhomogeneous shear flows of linear polymers

Solutions of a system of equations of nonlinear viscoelastic fluid motion describing inhomogeneous shear flows of linear polymers are indicated.Notation _ij stress tensor - p pressure - F_i mass force vector - _ij Kronecker delta - coefficient of shear viscosity - relaxation time - _ij inner parameter - _ij=vi/x_j velocity gradient tensor - ₀ initial value of the shear viscosity coefficient - ₀ initial value of the relaxation time - D dimensionless first invariant of the additional stress tensor - A, B, C constants of integration - f(D) universal function characterizing the material - r, , z cylindrical coordinates - u=v_z axial component of the velocity vector - v=v circumferential component of the velocity vector - ₁, ₂ first and second differences of the normal stress - Q volume mass flow rate - R radius of a circular tube - R₁, R₂ radii of the inner and outer cylinders, respectively - M moment per unit length Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 41, No. 3, pp. 449–456, September, 1981.     

Microstructure refinement with forced convection in aluminium and superalloys

The cooling and average local solidification times were determined for slow solidifiation of Al-4.4 wt% Cu alloy under natural convection and under electromagnetically forced axisymmetric rotation during liquid cooling and solidification in graphite moulds. Cooling rates were measured within situ thermocouples. The conditions needed to stabilize the radial temperature gradient with rotation were established. The microstructure size decreased with increasing rotation, as did the local solidification times. The average grain and dendrite size without imposed rotation is coarser near the mould wall compared with the centre of the casting. This trend is reversed with imposed rotation. Rotation also led to a smaller spread of grain and dendrite size at any chosen height of the casting. These results are discussed in relation to existing theories, and several reasons for an improved heat transfer coefficient with rotation are presented. Forced convective solidification was then carried out for various shapes of integral investment cast Nimonic-90 alloy solidifying under modified conditions that prevented columnar grain formation. Similar results to those recorded for the aluminium case were obtained and are presented here. The major conclusion is that observations indicating a reduction of microstructure spacing during forced convection should also consider improved heat extraction at the mould-metal interface.List of symbols Gr Grashof number =gTZ ^{3 3}/ ³ - g _r acceleration in radial direction - g acceleration in direction - g _z acceleration inZ direction (gravity) - h heat transfer coefficient - k _l thermal conductivity of liquid - Nu _z Nusselt number =hZ/k _l - Pr Prandtl number =/ - Ra Rayleigh numberGr Pr - R radius of mould - Re _r Reynolds number =V ₀ R/ - T temperature - T temperature difference in radial direction - Ta Taylor number = ²4H ⁴ W ²/ ² - V velocity - W r.p.m. - thermal diffusivity - coefficient of volume expansion - viscosity - density Mr G. S. Reddy is also a post graduate student registered at the Banaras Hindu University, Varanasi, India.     

Non-linear liquid motion in conical containers

Summary The non-linear behavior of an incompressible and frictionless liquid with a free surface in an annular conical sector frustrum container has been determined. All special cases of conical tanks may be obtained from the results. Some configurations have been evaluated numerically. It was found that the oscillating liquid system exhibits softening behavior, showing for increased free surface amplitudes decreased natural frequencies as compared to the linearized frequencies. This non-linear behavior is more pronounced for larger vertex angles and smaller frustrum heights.Notation a, b radius (describing the free surface,r=a the container bottomr=b) - k=b/a ratio of radii - g gravity constant or acceleration along the axis of the container - h liquid height - P ^m ,Q ^m associated Legendre functions of first and second kind and orderm - r, , spherical coordinates - p liquid pressure - t time - 2, 2 outer- and inner vertex angle resp - 2 sector angle of container - (r, , ,t) velocity potential - liquid density - zeros of associated Legendre function or cross product Legendre functions with respect to the degree - non-linear frequency - _mn ⁽⁰⁾ linearized natural frequencies of liquid - free surface elevation With 7 Figures     

The Infrared Hall Effect in YBCO: Temperature and Frequency Dependence of Hall Scattering

We measure the Hall angle, _H , in YBCO films in the far- and mid-infrared to determine the temperature and frequency dependence of the Hall scattering. Using novel modulation techniques we measure both the Faraday rotation and ellipticity induced by these films in high magnetic fields to deduce the complex conductivity tensor. We observe a strong temperature dependence of the mid-infrared Hall conductivity in sharp contrast to the weak dependence of the longitudinal conductivity. By fitting the frequency dependent normal state Hall angle to a Lorentzian _H () = _H /( _H – i) we find the Hall frequency, _H , is nearly independent of temperature. The Hall scattering rate, _H , is consistent with _H T ² up to 200 K and is remarkably independent of IR frequency suggesting non-Fermi liquid behavior.     

Heat transfer and the combustion temperature of coke particles in a fluidized bed

The temperature of carbon particles undergoing combustion in a fluidized bed is measured. Heat-transfer laws are ascertained.Notation a diffusivity of air - c heat capacity of air - D diffusion coefficient of oxygen in air - d₀, d initial and running diameters of carbon sphere - d_i diameter of inert particles - k rate constant for carbon monoxide combustion - q calorific value of carbon oxidation to CO₂ - T temperature difference between burning particle and fluidized bed - X, X_n oxygen concentration in the fluidized bed and on the surface of the burning particle - Z, Z_n running concentration of carbon monoxide and concentration on the surface of the burning particle - heat-transfer coefficient between fluidized bed and burning particle - _m maximum heat-transfer coefficient between fluidized bed and a stationary body submerged in the bed - masstransfer coefficient between fluidized bed and burning particle - thermal conductivity of air - kinematic viscosity of air - ₀, gr, ₄ density of oxygen, air, and inert material - relative thickness of burning gas layer - relative thickness of diffusion boundary layer Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 42, No. 1, pp. 21–27, January, 1982.     

Measurements of the dynamic input impedance of a dc SQUID

The impedance of a circuit coupled magnetically via a mutual inductanceM _i to a dc SQUID of geometric inductanceL is modified by the dynamic input impedance of the SQUID, which can be characterized by the flux-to-current transfer functionJ J/;J is the current circulating in the SQUID loop and is the flux applied to the loop. At the same time, the SQUID is modified by the presence of the input circuit: in the lumped circuit approximation, one expects its inductance to be reduced toL ^r=(1– _e ² )L, where _e is an effective coupling coefficient. Calculations of J using an analog simulator are described and presented in the form of a dynamic inductance and a dynamic resistance versus bias currentI and . Experimental measurements of and were made on a planar, thin-film SQUID tightly coupled to a spiral input coil that was connected in series with a capacitorC _i to form a resonant circuit. Thus,J was determined from the change in the resonant freqency and quality factor of this circuit as a function ofI and . At low bias currents (low Josephson frequencies) the measured values of were in reasonable agreement with values simulated for the reduced SQUID, while at higher bias currents (higher Josephson frequencies) the measured values were in better agreement with values simulated for the unscreened SQUID. Similar conclusions were reached in the comparison of the experimental and simulated values of the flux-to-voltage transfer functionV . The reduction in the screening at the higher Josephson frequencies is believed to result from the parasitic capacitanceC _p between the SQUID and the input coil. In contrast to the behavior of the input inductance, the change in the input resistance R _i could not be explained in terms of the dynamic impedance of the SQUID reflected into the input circuit. Instead, R _i was dominated by capacitive feedback between the output of the SQUID and the input circuit viaC _p . The experimental values of R _i were satisfactorily explained by a simplified model that predicts R _i –M _iV ^r (C _p /C _i ).