共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
慢波结构SIR双频带通滤波器设计 总被引:1,自引:2,他引:1
本文通过分析阶梯阻抗谐振器(SIR)和慢波结构谐振器的特性,提出了利用SIR谐振器的寄生通带产生第二通带的双频带通滤波器设计方法,以达到滤波器小型化的目的;并基于0°馈电结构获取传输零点的原理对滤波器阻带性能进行优化。最后结合ADS仿真软件设计了一个中心频率在2.4GHz和5.2GHz的微带双频带通滤波器。仿真结果表明滤波器具有良好的带内带外特性。本文所设计的滤波器尺寸小,性能好,具有很好的实用价值。 相似文献
4.
针对微带滤波器高性能小型化的需求,提出了一种方环形微扰单元的双模贴片带通滤波器的设计.该滤波器由方形贴片作为谐振器,输入、输出端口采用直接馈电,具有对称结构.利用在方形贴片上蚀刻出方环形缺口的方式,对方形贴片谐振器进行微扰,实现双模滤波器.通过电磁仿真软件Ansoft HFSS分析了微扰单元的特性,对双模滤波器的性能进... 相似文献
5.
6.
7.
在现代通信技术的不断发展下,要求射频滤波器尺寸更小、性能更佳。而使用交叉耦合构造可控传输零点,则可在更少的谐振器下达成相同的性能指标。基于此,构造了1/4波长谐振的谐振器进行小型化,引入交叉耦合构造带外传输零点,并对滤波器版图合理优化布局,设计了一款小型化交叉耦合微带带通滤波器。通过HFSS建模仿真并测试了带宽在10.2~11 GHz的六阶小型化交叉耦合微带带通滤波器,测试结果表明,性能曲线与仿真曲线相吻合,成功验证了所设计结构的可行性。 相似文献
8.
9.
本文提出了基于微带贴片谐振器的高选择性双模双通带带通滤波器及一种模式分析算法.首次利用该算法分析了微带贴片的模式组成,计算了导模场的闭式解.微带贴片的耦合馈线同时作为谐振单元构成第二个通带,减小了结构尺寸.全波仿真分析(full wave analysis)结果及测试数据表明,与现有的双模双通带带通滤波器相比,本文设计的滤波器传输零点个数增加了2倍,达到11个,带外抑制度达到20dB,带内插损较小,仅为1.2dB,抑制了寄生通带.同时设计的拓扑结构复杂度较低,利于滤波器的小型化. 相似文献
10.
为了更好地满足无线通信系统对微波电路双频/多频段的需求,基于微带-槽线双层结构设计了一款应用于S波段的双频滤波功分器。首先,在单个半波长微带谐振器基础上,利用枝节加载技术设计一款双模谐振器,实现双频带通滤波器设计,并将该滤波器与Wilkinson功分器进行集成,实现双频滤波功分器设计;其次,利用微带线和槽线的对偶关系,在不增加电路尺寸的基础上,引入双模槽线谐振器与微带谐振器进行垂直级联,从而展宽滤波功分器的两个通带带宽;最后利用枝节加载技术优化馈电网络。由于双模微带-槽线谐振器和馈电网络自身的特性,在每个通带的两侧分别产生一个传输零点,实现较高的带外选择性,且每个传输零点单独可控。双频滤波功分器的两个通带中心频率分别工作于2.17 GHz和3.55 GHz,相对带宽分别为8.29%(2.08~2.26 GHz)和8.15%(3.41~3.7 GHz)。仿真结果和实测结果基本吻合。 相似文献
11.
Theory and experiment of dual-mode microstrip triangular patch resonators and filters 总被引:1,自引:0,他引:1
Jia-Sheng Hong Shuzhou Li 《Microwave Theory and Techniques》2004,52(4):1237-1243
In this paper, we report on the results of an investigation into dual-mode operation of microstrip triangular patch resonators and their applications for designing dual-mode bandpass filters. It has been found theoretically that the dual modes can result from the rotation and superposition of a fundamental mode. The characteristics of the dual modes and their mode splitting are described. The applications of this new type of dual-mode microstrip patch resonator in the design of microwave planar filter are presented. A circuit model for operation of this type of filter is proposed. Two- and four-pole filters of this type are demonstrated for the first time. Both theoretical and experimental results are presented. 相似文献
12.
A novel type of dual-mode microstrip bandpass filter using degenerate modes of a dual-mode microstrip square loop resonator with capacitively loaded open-loop arms is proposed. Such a dual-mode bandpass filter with a 0.75% bandwidth at the center frequency of 1.603 GHz is designed and fabricated to demonstrate the design of reduced-size microstrip filters. It is shown that the proposed filter has a size reduction of about 59% at the same center frequency, as compared with the dual-mode bandpass filters such as microstrip patch, cross-slotted patch, square loop and ring resonator filter. 相似文献
13.
A bandpass filter (BPF) design using a dual-mode microstrip triangular loop resonator is presented for the first time. The circuit produces frequency responses with one real finite frequency transmission zero and one imaginary finite frequency zero on either side of the passband. Depending on the perturbation arrangement, the nature of the coupling between degenerate modes causes the zeros to exchange their axis locations from real to imaginary and from imaginary to real while keeping their magnitude. This behavior results in frequency responses that are suitable for applications with asymmetrical requirements. Results show 8% bandwidth filters with insertion loss ranging from 0.82 dB to 1.4dB at 10 GHz. Advantages in size reduction and design flexibility are demonstrated when the triangular loop is compared to other dual-mode resonators. 相似文献
14.
Lei Zhu Ke Wu 《Microwave Theory and Techniques》1999,47(10):1938-1948
A joint field/circuit model is proposed in this paper to characterize a class of line-to-ring coupling structures for design and optimization of microstrip dual-mode filters and ring resonator circuits. The generic model is derived from field theory and presented in terms of circuit elements by applying a newly developed numerical deembedding technique called “short-open calibration” in a deterministic method-of-moments scheme. It provides a new design strategy for characterizing and optimizing electrical performance of the line-to-ring coupling structures. Such three-port topologies are explicitly formulated by using an equivalent network having circuit elements calculated by the proposed joint field/circuit model. Three microstrip tightly coupling geometries and their related ring resonators are studied with the extracted J-inverter susceptance parameters. Experiments are performed to validate the joint model and also show coupling characteristics of the three types of line-to-ring circuit for the design of ring resonators and dual-mode filters. With this new technique, an optimized microstrip dual-mode filter is successfully designed and the prediction agrees well with our measurements 相似文献
15.
A novel realisation of quasielliptic function narrowband bandpass filters constructed from face-to-face dual-mode microstrip square loop resonators is proposed. The new filter configuration allows crosscoupling between the degenerate modes of individual dual-mode resonators. The realisation has been confirmed both theoretically and experimentally 相似文献
16.
基于传统的T形贴片双模微带带通滤波器,提出了一种新型的加入缝隙耦合的T形双模微带带通滤波器。在T形贴片谐振器的两侧以缝隙耦合的方式插入馈线,并对其进行了优化。优化后的滤波器能在通带两侧都产生衰减极点,提高了阻带的抑制能力,对其进行了仿真。仿真结果表明,该滤波器通带的中心频率为5.0 GHz,与实测结果基本一致,滤波器尺寸为34 mm×24 mm,保证了滤波器的小型化。 相似文献
17.
A novel dual-mode microstrip square loop resonator is proposed using the slow-wave and dispersion features of the microstrip slow-wave open-loop resonator. It is shown that the designed and fabricated dual-mode microstrip filter has a wide stopband including the first spurious resonance frequency. Also, it has a size reduction of about 50% at the same center frequency, as compared with the dual-mode bandpass filters such as microstrip patch, cross-slotted patch, square loop, and ring resonator filter. 相似文献
18.
A compact Chebyshev-function bandpass filter using dual-mode patch resonators is proposed. The filter presents 75% size reduction compared with the conventional Chebyshev bandpass filter using two square patch resonators. Because of inset feeding and only one coupling gap being required, the new filters can achieve a low insertion loss of 1.1 dB and reduce the fabrication uncertainties 相似文献
19.
Peng Cai Zhewang Ma Hitoshi Kanzaki Yong Zhang Bin Chen 《Journal of Infrared, Millimeter and Terahertz Waves》2009,30(5):432-438
This paper presents a novel millimeter-wave ultra-wideband (UWB) bandpass filter (BPF) based on microstrip dual-mode rectangular
ring resonators. In order to get strong coupling between the input/output line and the dual-mode ring resonators, a step-impedance
parallel-coupled structure is adopted for the design of the filter. On the other hand, transmission zeros are produced by
the dual-mode resonator. As a consequence, the filter has low insertion-loss in its passband, sharp attenuation in its lower
and upper stopbands and very wide stopbands. As an example, a filter with two dual-mode ring resonators is designed and fabricated.
The measured frequency property of the fabricated filter shows good agreement with the simulated response. 相似文献
20.
Xiu Yin Zhang Quan Xue 《Microwave Theory and Techniques》2007,55(10):2183-2190
This paper presents a novel approach for designing dual-mode dual-band bandpass filters with independently controlled center frequencies and bandwidths. Two microstrip perturbed ring resonators are employed to obtain dual-mode dual-band responses. Novel feeding structures are introduced to simultaneously feed the ring resonators and conveniently control the coupling strength between resonators and feeding lines, resulting in a wide tunable range of external quality factors. Two kinds of filter configurations with compact size are proposed. Both of them provide sufficient degrees of freedom to satisfy various requirements of external qualify factors and coupling coefficients at both passbands. Therefore, the center frequencies and fractional bandwidths of both passbands can be independently tuned to desired specifications within a wide range. To verify the proposed method, four filters are implemented. The measured results exhibit dual-mode dual-band bandpass responses with high selectivity. 相似文献