Grafting onto wool,XVII. Graft copolymerization of methyl acrylate and ethyl acrylate by use of VO(acac)2 as initiator. Comparison of monomer reactivities

Graft copolymerization of acceptor monomers methyl acrylate and ethyl acrylate onto Himachali wool fiber has been studied in aqueous medium by using vanadium oxyacetyl acetonate as initiator at 40, 50, 60, and 70°C. Graft copolymerization was carried out for various reaction periods and nitric acid was found to catalyse the reaction. Percentage of grafting and percent efficiency have been determined as functions of concentration of nitric acid, concentration of initiator, concentration of monomer, time, and temperature. Under optimum conditions, methyl acrylate and ethyl acrylate afforded maximum grafting to the extent of 28.4 and 18.5%, respectively. Relative reactivities of methyl acrylate and ethyl acrylate towards grafting have been compared with those of methyl methacrylate, acrylic acid and vinyl acetate reported earlier from this laboratory. Different vinyl monomers showed the following reactivity order: MMA > MA > EA > AAc > VAc. Several grafting experiments were carried out in the presence of various additives which included tert-butylhydroperoxide (TBHP), dimethylsulfoxide, pyridine, and dimethylformamide. Only TBHP was found to enhance grafting to a considerable extent, other additives decrease percent grafting of both methyl acrylate and ethyl acrylate.     

Grafting onto wool. VII. Ceric ion-initiated graft copolymerization of vinyl monomers. Comparison of monomer reactivities

In an attempt to compare relative reactivities of vinyl monomers toward grafting, methyl methacrylate (MMA) and acrylic acid (AAc) were grafted separately to Himachali wool in aqueous medium by using ceric ammonium nitrate (CAN) as redox initiator. Nitric acid was found to catalyze the reaction. Percent grafting was determined as a function of concentration of nitric acid, concentration of CAN, concentration of monomer, time, and temperature. Optimum conditions for maximum grafting were evaluated for each monomer and were found to depend upon the nature of the monomer. Reactivities of MMA and AAc toward grafting were compared with those of methyl acrylate (MA), ethyl acrylate (EA), and vinyl acetate (VAc) reported earlier from this laboratory and were found to follow the order MA > EA > MMA > VAc > AAc. An explanation for the observed order of reactivity of different vinyl monomers is presented.     

Thermal behavior of graft copolymers of cotton cellulose and acrylate monomers

Cotton cellulose yarn was grafted with methyl acrylate, ethyl acrylate, n-butyl acrylate, and methyl methacrylate at various percentages of grafting. The effects of concentration of the initiator, concentration of the acid, and of temperature on grafting was studied and the mechanism discussed. The effect of reactivity of the monomer on the percentage graft-on is pointed out. Thermal behavior of natural and grafted cotton yarn was studied using dynamic thermogravimetry in air at a heating rate of 6°C/min up to a temperature of 500°C. The thermal stabilities of the samples grafted with various acrylate monomers to various percentages of grafting were computed from their primary thermograms by calculating the values of IDT, IPDT, and E^*. The results show that the thermal stability increases with increase in graft-on per cent, and the thermal stabilities of natural cotton and cotton grafted with different monomers are in the order ethyl > methyl > natural cellulose > methyl methacrylate > n-butyl acrylate.     

Synthesis and characterization of vegetable tannin-vinyl graft copolymers part I. Cutch-poly(methyl acrylate) graft copolymers

New graft copolymers were synthesized by grafting methyl acrylate onto cutch, a vegetable tanning agent, in acetic acid medium with hydrogen peroxide as the initiator. The graft copolymers were characterized by infrared spectroscopy and thermogravimetric analysis. The dependence of the percentage of grafting, monomer conversion, efficiency of grafting and rate of grafting on the concentrations of initiator, acetic acid, and cutch were investigated. The optimum experimental conditions for grafting were obtained. A probable mechanism of grafting was also proposed.     

Modification of leather properties by grafting. I. Effect of monomer chain on the physico‐mechanical properties of grafted leather

Although leather has a number of desirable properties such as thermal stability and fire retardancey, in addition to high toughness, it has a few drawbacks such as weight, high water absorption, poor soil and rot resistance, and nonuniformity. If these defects are overcome, leather's usefulness would be further enhanced and its competitive position with respect to synthetics would increase. This study reports the physical and mechanical properties of buffalo leather after chemical graft copolymerization with ethyl acrylate, butyl acrylate, and 2‐ethyl hexyl acrylate using benzoyl peroxide as an initiator. The optimum conditions for grafting (e.g., monomer and initiator concentrations, temperature and time of grafting, and solvent leather ratio) were extensively investigated. The study achieved outstanding properties for buffalo leather in reduction of water uptake after grafting, especially on using 2‐ethyl hexyl acrylate and butyl acrylate monomers. FT‐IR and solid ¹³C‐NMR for leather before and after grafting confirmed the grafting process.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1478–1483, 2003     

Ionic Xanthate Method of Grafting. II

In the ionic xanthate method of grafting, the increase of sodium hydroxide concentration and liquor ratio increased the grafting parameters up to a limit. The limit varied from one monomer to another. The positive values of the standard degree of concentration of sodium hydroxide indicate that the graft polymerization reaction has happened. The extent of decrease in the grafting parameters with the increase of the liquor ratio may be due to an increase of termination reactions as a result of the increasing number of HOH molecules, with resulting chain transfer reactions to solvent. Grafting parameters also increased with an increase of the concentration of monomers up to a limit. The reactivity of these monomers is in the order: methyl methacrylate > ethyl acrylate > allyl chloride > acrylonitrile > methyl acrylate > allyl alcohol, being dependent on both the radical stabilization and the strength of the electron acceptance of the monomers. The activation energy of the overall polymerization reaction (i.e., grafting and homopolymer) decreased with the increase of the crude grafting yield, and the reverse relation was achieved with the true grafting yield (i.e., grafting reaction only). This difference may contribute to the difference in the conformation of the polymer chains in graft polymerization on the active sites of the cellulose chains.     

Ionic Xanthate Method of Grafting. II

In the ionic xanthate method of grafting, the increase of sodium hydroxide concentration and liquor ratio increased the grafting parameters up to a limit. The limit varied from one monomer to another. The positive values of the standard degree of concentration of sodium hydroxide indicate that the graft polymerization reaction has happened. The extent of decrease in the grafting parameters with the increase of the liquor ratio may be due to the increase of the termination reactions as a result of increasing the number of HOH molecules and the consequent chain transfer reactions to solvent. Grafting parameters also increased with the increase of the concentration of monomers up to a limit. The reactivity of these monomers is in the order: methyl methacrylate > ethyl acrylate > allyl chloride > acrylonitrile > methyl acrylate > allyl alcohol, being dependent on both the radical stabilization and the strength of the electron acceptance of the monomers. The activation energy of the overall polymerization reaction (i.e., grafting and homopolymer) decreased with the increase of the crude grafting yield, and the reverse relation was achieved with the true grafting yield (i.e., grafting reaction only). This difference may be attributed to the difference in the conformation of the polymer chains to graft polymerize on the active sites of the cellulose chains.     

Synthesis and characterization of graft copolymers of ethyl acrylate/acrylamide mixtures onto starch

Graft copolymerization of ethyl acrylate/acrylamide onto corn starch using potassium permanganate–citric acid initiation system was investigated. Major factors affecting the polymerization reaction were thoroughly investigated in terms of initiator concentration, monomer concentration, polymerization time, polymerization temperature, and starch/liquor, and the obtained results implied that the polymer yield which were expressed by total monomer conversion, grafting ratio, and grafting efficiency were determined by these factors. The optimum reaction conditions were as follows: starch, 30 g; potassium permanganate (based on weight of starch), 0.1%; citric acid (based on weight of starch), 0.5%; ethyl acrylate, 20%; acrylamide, 0.4 g; time, 3 h; temperature, 40°C; starch/liquor, 1:3. We concluded that the initiator of potassium permanganate–citric acid system could be used as a cheap initiator in manufacturing the starch graft copolymer. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

偏光片用压敏胶粘剂的合成及性能研究

采用聚合物共混改性的方法,以高、低分子量共聚物共混,使其分子量分布变宽,在保持较好的持粘力的情况下,改善初粘力和剥离强度。实验以丙烯酸丁酯、丙烯酸乙酯为软单体,甲基丙烯酸甲酯、甲基丙烯酸丁酯、甲基丙烯酸乙酯等为硬单体,以过氧化苯甲酰BPO为引发剂,甲苯和乙酸乙酯为溶剂,合成了一系列高、低分子量丙烯酸酯共聚物,再通过调节功能性单体丙烯酸AA的含量以及高、低分子量共聚物的共混配比,使压敏胶粘剂的性能得到了很好的改善。     

Grafting onto wool. XIV. Graft copolymerization of vinyl monomers by use of Mn(AcAc)3 as an initiator

Ethyl acrylate (EA), butyl acrylate (BA), and vinyl acetate (VAc) have been graft copolymerized onto Himachali wool fiber in an aqueous medium by using Mn(AcAc)₃ as an initiator. Graft copolymerization was studied at 45°, 55°, 65° and 75°C for various reaction periods. Percentage of grafting and percent efficiency were determined as functions of concentration of monomer, concentation of initiator, concentration of nitric acid, time, and temperature. Several grafting experiments were carried out in the presence of various additives which included: (i) pyridine and (ii) Et₃ N. EA, BA, and VAc were found to differ in reactivity towards grafting and followed the order: EA > BA > VAc.     

Ionomers made from terpolymers with uniform poly(methyl methacrylate) grafts

Terpolymers with uniform poly(methyl methacrylate) (PMMA) grafts were prepared by terpolymerization of PMMA macromonomer, butyl acrylate, and acrylic acid in benzene using AIBN as initiator. During terpolymerization the macromonomer polymerizes faster than the monomers at the beginning but slower at the latter stage. The terpolymers were purified by solvent extraction and fractional precipitation. The average grafting number per chain of the terpolymers was determined to be 3–8. Ionomers were obtained by neutralization of the terpolymers with alkali hydroxide or metallic acetate. Dynamic mechanical spectrum of the ionomer shows the existence of two T_g's, which implies the occurence of microphase separation. The ionomer exhibits high damping over a temperature range from ?25 to 100°C. Both PMMA grafts and metallic carboxylate content raise the tensile strength of the ionomer and lower the ultimate elongation. The tensile strength of ionomers neutralized with different metallic ions decreases in the following order: Pb²⁺ > Zn²⁺ > Na⁺ > Ca²⁺ > Mg²⁺ > K⁺. The ionomers with uniform PMMA grafts show much better mechanical properties than the terpolymer without neutralization or the ionomer without PMMA grafts.     

丙烯酸酯防雾涂料的合成及性能的研究

以甲基丙烯酸甲酯、甲基丙烯酸丁酯及丙烯酸β－羟乙酯为单体,采用溶液共聚法合成了亲水性防雾涂料。对引发剂用量、反应温度、单体原料配比和交联剂对涂料的防雾性及耐摩擦性的影响进行了讨论。     

Graft copolymerization of methyl acrylate onto poly(vinyl alcohol) initiated by potassium diperiodatonickelate(IV)

The graft copolymerization of methyl acrylate onto poly(vinyl alcohol) (PVA) with a potassium diperiodatonickelate(IV) [Ni(IV)]–PVA redox system as an initiator was investigated in an alkaline medium. The grafting parameters were determined as functions of the temperature and the concentrations of the monomer and initiator. The structures of the graft copolymers were confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. The Ni(IV)–PVA system was found to be an efficient redox initiator for this graft copolymerization. A single‐electron‐transfer mechanism was proposed for the formation of radicals and the initiation. Other acrylate monomers, such as methyl methacrylate, ethyl acrylate, n‐butyl acrylate, and n‐butyl methacrylate, were used as reductants for graft copolymerization. These reactions definitely occurred to some degree. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 529–534, 2003     

Dynamic Mechanical Properties and Adhesive Joint Strengths of Emulsion Polymers Produced by Power Feed Technique. II. Chemical Structure of Grafted Power Feed Polymer

Power feed copolymers were synthesized using styrene and n-butyl acrylate through a non-uniform feeding emulsion polymerization. Poly(vinyl alcohol) (PVA) was used as a protective colloid, onto which vinyl monomers were grafted. With the increase of PVA, grafting was also increased. Feeding method did not affect grafting nor grafting efficiency to a great extent. However, the amount of initiator had a negative correlation against grafting or grafting efficiency. From NMR spectroscopy, it was known that n-butyl acrylate monomer grafted onto PVA rather than copolymerized with styrene monomer. In order to increase the cohesive strengths of each phase, grafting was introduced to the power feed polymerization. In these cases, the chemical structure of grafted power feed polymer was investigated.     

Dynamic Mechanical Properties and Adhesive Joint Strengths of Emulsion Polymers Produced by Power Feed Technique. II. Chemical Structure of Grafted Power Feed Polymer

Power feed copolymers were synthesized using styrene and n-butyl acrylate through a non-uniform feeding emulsion polymerization. Poly(vinyl alcohol) (PVA) was used as a protective colloid, onto which vinyl monomers were grafted. With the increase of PVA, grafting was also increased. Feeding method did not affect grafting nor grafting efficiency to a great extent. However, the amount of initiator had a negative correlation against grafting or grafting efficiency. From NMR spectroscopy, it was known that n-butyl acrylate monomer grafted onto PVA rather than copolymerized with styrene monomer. In order to increase the cohesive strengths of each phase, grafting was introduced to the power feed polymerization. In these cases, the chemical structure of grafted power feed polymer was investigated.     

Graft copolymerization of vinyl monomers on cellulosic materials

Graft copolymers of acrylonitrile, ethyl acrylate, methyl acrylate, ethyl methacrylate and methyl methacrylate and of acrylonitrile/ethyl methacrylate and acrylonitrile/methyl methacrylate monomer mixtures on carboxymethylcellulose (degree of substitution 0.4–0.5) were prepared by use of ceric ion initiator in aqueous medium. The extent of graft polymer formation was measured in terms of graft level, molecular weight of grafted polymer chains and frequency of grafting as function of ceric ion concentration. It was found that at comparable reaction conditions, the molecular weight and frequency of grafting were not of the same order of magnitude. For the monomer mixtures, the copolymer compositions obtained from the total nitrogen content of the acrylonitrile/alkyl methacrylate copolymer samples showed that a relativity low amount of the acrylonitrile monomeric units were incorporated into the graft copolymer even at high acrylonitrile content of the feed.     

Effect of radiation chemical treatment on sisal fibers I. Radiation induced grafting of ethyl acrylate

Radiation induced graft copolymerization of ethyl acrylate onto sisal fibers was investigated. It was fond that the percent added-on of ethyl acrylate to sisal fibers was prohibitively low when using the direct grafting method due to excessive hompolymerization. The preirradiation method was found to be invalid for improving the grafting content. In the presence of small amounts of styrene (St) the copolymerization can be achieved with little homopolymer formation by the direct grafting technique. The presence of sulfuric acid in the grafting solution enhances the grafting of styrene–ethyl acrylate comonomer to sisal fibers. the effect of different solvents, monomer concentration, and irradiation doses were followed. Sisal fibers were treated with sodium hydroxide, sulfuric acid, and combined treatment of both of them. The effect of these treatments on the grafting content was investigated. The grafting yield decreased when sisal fibers were subjected to alkali treatment under tension. However, sisal fibers pretreated with 0.4N sulfuric acid showed a slight increase in the grafting yield over the untreated samples.     

Compatibility of polyacrylates and polymethacrylates with poly(vinyl chloride): 1. Compatibility and temperature variation

Mixtures of a series of polymethacrylates and polyacrylates with PVC were prepared by solvent casting from methyl ethyl ketone. Some mixtures were also prepared by mechanical mixing and in situ polymerization (polymerization of vinyl chloride monomer in the presence of the other polymer). The mixtures were assessed for compatibility by dynamic mechanical measurements and optical clarity. It was found that all polymethacrylates from poly(methyl methacrylate) to poly(n-hexyl methacrylate) were compatible with PVC as were poly(n-propyl acrylate) and poly(n-butyl acrylate). Higher chain polyacrylates are incompatible. Poly(methyl acrylate) and poly(ethyl acrylate) appear incompatible with PVC when mixtures are prepared by solvent casting, but compatible when prepared by in situ polymerization, and mechanical mixtures show some sign of compatibility. It seems possible that in this case the solvent interferes with the compatibility. Mixtures of PVC with poly(n-hexyl methacrylate), poly(n-butyl acrylate) and poly(n-propyl acrylate) phase separate when heated in the region between 100°C and 160°C indicating the existence of a lower critical solution temperature.     

竹原纤维与丙烯酸酯接枝物的结构与性能研究

以Ce4+引发丙烯酸甲酯(MA)、丙烯酸乙酯(EA)、丙烯酸丁酯(BA)与竹原纤维进行接枝聚合,用ATR、SEM、XRD和TG等手段表征接枝纤维的结构。接枝后纤维强度和初始模量下降,断裂伸长和柔顺性提高;耐酸、耐碱能力随接枝率的增加而提高,热稳定性提高,回潮率下降。接枝单体对纤维的改性效果顺序为BA>EA>MA。     

Graft copolymerization of methyl acrylate onto poly(vinyl alcohol) initiated by potassium diperiodatoargentate(III)

The graft copolymerization of methyl acrylate onto poly(vinyl alcohol) (PVA) using potassium diperiodatoargentate(III) [Ag(III)]–PVA redox system as initiator was studied in an alkaline medium. Some structural features and properties of the graft copolymer were confirmed by Fourier‐transfer infrared spectroscopy, scanning electron microscope, X‐ray diffraction and thermogravimetric analysis. The grafting parameters were determined as a function of concentrations of monomer, initiator, macromolecular backbone (X?_n = 1750, M? = 80 000 g mol^?1), reaction temperature and reaction time. A mechanism based on two single‐electron transfer steps is proposed to explain the formation of radicals and the initiation profile. Other acrylate monomers, such as methyl methacrylate, ethyl acrylate and n‐butyl acrylate, were also used to produce graft copolymerizations. It has been confirmed that grafting occurred to some degree. Thermogravimetric analysis was performed in a study of the moisture resistance of the graft copolymer. Copyright © 2004 Society of Chemical Industry