Cu doped ZnO nanoparticle sheets

Cu doped ZnO nanoparticle sheets were synthesized via a proposed solution route with mixed Zn(NO₃)₂ and Cu(NO₃)₂ precursors at a low temperature of 95 °C. Scanning electron microscopy, transmission electron microscopy, and X-ray energy dispersive spectrometry results demonstrate that the nanostructues synthesized by solutions with higher Cu(NO₃)₂ concentration are nanoparticle sheets comprised of uniform Cu doped ZnO nanoparticles with diameters around 20 nm. Room-temperature photoluminescence spectra of the nanoparticle sheets show tunable near band emissions centered at 390–405 nm and strong yellow emissions at 585–600 nm. Absorbance spectra show gradual redshift in the UV range with the increase of Cu concentrations in the ZnO nanomaterials. The study provides a simple and efficient route to prepare Cu doped ZnO nanomaterials at low temperature. The as-synthesized products with both violet and yellow emissions are promising for white light-emitting diode applications.     

Synthesis and comparative study of Ho and Y doped ZnO nanoparticles

Ho and Y doped ZnO nanoparticles were synthesized using a wet chemical route followed by structural, electrical and magnetic property characterization of the same. We present a comparison of the properties of Ho and Y (having same ionic radii) doped ZnO nanoparticles. X-ray diffraction studies of the diffraction data exhibit a monophasic wurtzite crystal structure similar to that of the parent compound, ZnO. Microstructural investigations of these samples by scanning electron microscopy show the presence of nanostructures. The optical measurements show an increase in the band gap of doped samples as compared to the undoped sample. DC magnetization measurements of Ho doped ZnO point towards the presence of hysteresis loop at 5 K with an H_c of about 110 Oe for a nominal 1 mol% Ho doped sample. The resistivity of Ho doped sample is found to be higher as compared to the undoped and Y doped sample.     

(101)-oriented ZnO nanoparticles fabricated in Si (100) by Zn ion implantation and thermal oxidation

ZnO nanoparticles (NPs) embedded in Si (100) substrate have been created by Zn ion implantation and post thermal annealing in oxygen atmosphere. Several techniques have been employed to investigate the formation of Zn NPs and their thermal evolution at elevated temperatures. Grazing X-ray diffraction results clearly show that ZnO NPs are effectively formed after 600 °C annealing, and they show a (101) preferential orientation. Cross-sectional transmission electron microscopy observations confirm that ZnO NPs with a narrow size distribution of 2–7 nm are formed within the near-surface region of about 35 nm in thickness. Photoluminescence measurement displays a strong emission band centered at 387 nm in the sample annealed at 600 °C.     

Synthesis,characterization and photocatalytic properties of nanostructured ZnO particles obtained by low temperature air-assisted-USP

ZnO nanoparticles were synthesized in a horizontal three zones furnace at 500 °C using different zinc nitrate hexahydrate concentrations (0.01 M, 0.1 M, and 1.0 M) as a reactive precursor solution by air assisted Ultrasonic Spray Pyrolysis (USP) method. The physico-chemical, structural and functional properties of synthesized ZnO nanoparticles have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), high resolution transmission electron microscopy (HRTEM), Brunauer, Emmett and Teller (BET) method, UV–vis spectroscopy and photoluminescence (PL) measurements. Also, the photocatalytic activities of ZnO synthesized from different precursor concentrations were evaluated by removal rate of methyleneblue (MB) under UV irradiation (365 nm) at room temperature. SEM revealed two types of ZnO nanoparticles: a quasi-spherical, desert-rose like shape of the secondary particles, which does not change significantly with the increasing of precursor solution concentration as well as some content of the broken spheres. Increasing the precursor solution concentration leads to the increase in the average size of ZnO secondary particles from 248 ± 73 to 920 ± 190 nm, XRD reveals the similar tendency for the crystallite size which changes from 23 ± 4 to 55 ± 12 nm in the analyzed region. HRTEM implies the secondary particles are with hierarchical structure composed of primary nanosized subunits. The PL spectra imply a typical broad peak of wavelength centered in the visible region exhibiting the corresponding red-shift with the increase of solution concentration: 560, 583 and 586 nm for the 0.01, 0.1 and 1.0 M solution, respectively. The reported results showed the photocatalytic efficiency of ZnO nanoparticles was enhanced by increased precursor concentration.     

Microstructural and optical properties of nanocrystalline ZnO deposited onto vertically aligned carbon nanotubes by physical vapor deposition

Nanocrystalline ZnO films with thicknesses of 5 nm, 10 nm, 20 nm, and 50 nm were deposited via magnetron sputtering onto the surface of vertically aligned multi-walled carbon nanotubes (MWCNTs). The ZnO/CNTs heterostructures were characterized by scanning electron microscopy, high resolution transmission electron microscopy, and X-ray diffraction studies. No structural degradation of the CNTs was observed and photoluminescence (PL) measurements of the nanostructured ZnO layers show that the optical properties of these films are typical of ZnO deposited at low temperatures. The results indicate that magnetron sputtering is a viable technique for growing heterostructures and depositing functional layers onto CNTs.     

Anionic surfactant-assisted hydrothermal synthesis of high-aspect-ratio ZnO nanowires and their photoluminescence property

ZnO nanowires with high-aspect-ratio of up to ca. 600 were synthesized in a quaternary reverse microemulsion containing sodium dodecyl sulfate (SDS) / water / heptane / n-hexane via a hydrothermal method. SDS, as an anionic surfactant, plays an important role in the formation of morphologies. Subsequently, we studied lots of key influencing factors including the molar ratio (w) value of NaOH to Zn(OAc)₂, the reaction temperature, and the instance without the quaternary reverse microemulsion. The selected-area electron diffraction (SAED) and high-resolution transmission electron microscopy (HRTEM) reveal the single-crystal nature of the ZnO nanowires. The morphologies and crystalline structure of the as-obtained products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and powder X-ray diffraction (XRD), respectively. Through this route, we can obtain a mass of products and the method is both convenient and reproducible. Finally, we measured the photoluminescence (PL) spectra and found that the ZnO nanowires exhibited green-orange emission at 525 nm and short ultraviolet emission at 380 nm and the ZnO nanomaterials with different aspect ratio (length to diameter) (L / D) showed PL intensity disciplinary change. Aiming at this phenomenon, we propose a reasonable mechanism to explain the PL spectra of the ZnO nanomaterials in detail.     

Effect of sputtering power on the electrical and optical properties of Ca-doped ZnO thin films sputtered from nanopowders compacted target

In the present work, we have deposited calcium doped zinc oxide thin films by magnetron sputtering technique using nanocrystalline particles elaborated by sol–gel method as a target material. In the first step, the nanoparticles were synthesized by sol–gel method using supercritical drying in ethyl alcohol. The structural properties studied by X-ray diffractometry indicates that Ca doped ZnO has a polycrystalline hexagonal wurzite structure with a grain size of about 30 nm. Transmission electron microscopy (TEM) measurements have shown that the synthesized CZO is a nanosized powder. Then, thin films were deposited onto glass substrates by rf-magnetron sputtering at ambient temperature. The influence of RF sputtering power on structural, morphological, electrical, and optical properties were investigated. It has been found that all the films deposited were polycrystalline with a hexagonal wurtzite structure and preferentially oriented in the (0 0 2) crystallographic direction. They have a typical columnar structure and a very smooth surface. The as-deposited films show a high transmittance in the visible range over 85% and low electrical resistivity at room temperature.     

Fabrication and characterization of tetrapod-like ZnO nanostructures prepared by catalyst-free thermal evaporation

Tetrapod-like ZnO nanostructures were fabricated on ZnO-coated sapphire (001) substrates by two steps: pulsed laser deposition (PLD) and catalyst-free thermal evaporation process. First, the ZnO films were pre-deposited on sapphire (001) substrates by PLD. Then the ZnO nanostructures grew on ZnO-coated sapphire (001) substrate by the simple thermal evaporation of the metallic zinc powder at 900 °C in the air without any catalysts. The pre-deposited ZnO films by PLD on the substrates can provide growing sites for the ZnO nanostructures. The as-synthesized ZnO nanostructures were characterized by using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and Fourier transform infrared spectrum (FTIR). The results show that the tetrapod-like ZnO nanostructures are highly crystalline with the wurtzite hexagonal structure. Photoluminescence (PL) spectrum of as-synthesized nanostructures exhibits a UV emission peak at ～ 389 nm and a broad green emission peak at ～ 513 nm. In addition, the growth mechanism of ZnO nanostructures is also briefly discussed.     

Low temperature dielectric studies of zinc oxide (ZnO) nanoparticles prepared by precipitation method

Using zinc nitrate as a precursor and NaOH starch as a stabilizing agent, hexagonal zinc oxide (ZnO) nanoparticles has been synthesized by precipitation method. The transmission electron microscopy (TEM) images show particles of nearly uniform spherical size of around 40 nm. The infrared spectroscopy (FT-IR) measurement reveals the peak at 500 cm^?1, corresponding to the Zn–O bond. Dielectric studies of ZnO nanoparticles show frequency dependence dielectric anomaly at low temperature (85–300 K). Results reveal that the capacitance and loss tangent decrease with the frequency while these parameters improve with the increasing of temperature. The increase of a.c. conductivity with the temperature indicates that the mobility of charge carriers is responsible for hopping and electronic polarization in ZnO nanoparticles.     

Optical investigations on indium oxide nano-particles prepared through precipitation method

Visible light emitting indium oxide nanoparticles were synthesized by precipitation method. Sodium hydroxide dissolved in ethanol was used as a precipitating agent to obtain indium hydroxide precipitates. Precipitates, thus formed were calcined at 600 °C for 1 h to obtain indium oxide nanoparticles. The structure of the particles as determined from the X-Ray diffraction pattern was found to be body centered cubic. The phase transformation of the prepared nanoparticles was analyzed using thermogravimetry. Surface morphology of the prepared nanoparticles was analyzed using high resolution-scanning electron microscopy and transmission electron microscopy. The results of the analysis show cube-like aggregates of size around 50 nm. It was found that the nanoparticles have a strong emission at 427 nm and a weak emission at 530 nm. These emissions were due to the presence of singly ionized oxygen vacancies and the nature of the defect was confirmed through Electron paramagnetic resonance analysis.     

Microwave-assisted hydrothermal synthesis of ZnO rod-assembled microspheres and their photocatalytic performances

ZnO rod-assembled microspheres were successfully fabricated by using the microwave-assisted hydrothermal method in the existence of the poly ethylene glycol (PEG) with the molecular weight of 2000. The structure and morphology of as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) equipped with energy dispersive spectrometer (EDS), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). The experimental results exhibit that the as-prepared ZnO microspheres with a diameter about 1.5–2.0 μm were composed of many rods with the diameter of 300 nm and the length of 1 μm, respectively. Photoluminescene measurement shows a broad visible emission band centered at around 500–560 nm. The improved catalytic activity may be attributed to structural difference, including morphology, surface orientation and surface defects. Furthermore, the possible growth and photodegradation mechanism of the as-prepared sample is also briefly discussed.     

Effect of the surface texture and crystallinity of ZnO nanoparticles on their toxicity

We have investigated the correlation between the structural properties of ZnO nanoparticles (NPs) and their toxicity to mesenchymal stem cells (C2C12 cell line) and macrophage-derived cells (RAW 264.7 cell line). Nanopowders of grain size ranging between 5 nm and 50 nm were prepared by chemical route. Their structural properties were characterized extensively by X-ray Diffraction (XRD) and High Resolution Transmission Electron Microscopy (HRTEM). The XRD spectra showed that 50 nm sized NPs are well crystallized and present a preferential orientation along the direction normal to the (001) plane while the HREM observations revealed that most of the large size (50 nm) crystallized nanoparticles have polygonal shape which is consistent with a texture of along [001] direction. The toxicity tests showed that [001] large textured NPs have higher toxicity to inflammatory cells than nanoparticles of low crystallinity and much smaller size (5 nm). In addition, NPs have cytotoxic effects on inflammatory cells at concentration as low as 0.05 mM while ten times higher concentrations did not have significant cytotoxic effects on cells representing mesenchymal tissues. These observations are explained by the enhanced generation of Reactive Oxygen Species (ROS) at the (0001) polar surface of ZnO NP. These results provide a direct evidence of the correlation between the toxicity and the surface texture of the oxide nanoparticles. Similar correlation has been reported for the photocatalytic properties of ZnO nanoparticles.     

La-doped ZnO nanoparticles: Simple solution-combusting preparation and applications in the wastewater treatment

La-doped ZnO nanoparticles have been successfully synthesized by a simple solution combustion method via employing a mixture of ethanol and ethyleneglycol (v/v = 60/40) as the solvent. Zinc acetate and oxygen gas in the atmosphere were used as zinc and oxygen sources, and La(NO₃)₃ as the doping reagent. The as-obtained product was characterized by means of powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectrometry and X-ray photoelectron spectroscopy. Experiments showed that La-doped ZnO nanoparticles exhibited the higher capacities for the removal of Pb²⁺ and Cu²⁺ ions in water resource than undoped ZnO nanoparticles.     

Adherence inhibition of Streptococcus mutans on dental enamel surface using silver nanoparticles

The aim of this ex vivo study was to evaluate the adherence capacity of Streptococcus mutans after being exposed to three different sizes of silver nanoparticles on healthy human dental enamel. Three different sizes of silver nanoparticles (9.3, 21.3 and 98 nm) were prepared, characterized and an adherence testing was performed to evaluate their anti-adherence activity on a reference strain of S. mutans on healthy dental enamel surfaces. Colony-Forming Unit count was made for adherence test and light microscopy, atomic force microscopy and scanning electron microscopy were used to compare qualitative characteristics of S. mutans. 9.3 nm and 21.3 nm groups did not show differences between them but statistical differences were found when 9.3 nm and 21.3 nm groups were compared with 98 nm and negative control groups (p < 0.05). Microscopy analysis shows a better inhibition of S. mutans adherence in 9.3 nm and 21.3 nm groups than the 98 nm group when compared with control group. Silver nanoparticles showed an adherence inhibition on S. mutans and the anti-adherence capacity was better when silver nanoparticles were smaller.     

Preparation and characterization of copper nanoparticles/zinc oxide composite modified electrode and its application to glucose sensing

We report a new method for selective detection of d(+)-glucose using a copper nanoparticles (Cu-NPs) attached zinc oxide (ZnO) film coated electrode. The ZnO and Cu-NPs were electrochemically deposited onto indium tin oxide (ITO) coated glass electrode and glassy carbon electrode (GCE) by layer-by-layer. In result, Cu-NPs/ZnO composite film topography was characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. SEM and AFM confirmed the presence of nanometer sized Cu-NPs/ZnO composite particles on the electrode surface. In addition, X-ray diffraction pattern revealed that Cu-NPs and ZnO films were attached onto the electrode surface. Indeed, the Cu-NPs/ZnO composite modified electrode showed excellent electrocatalytic activity for glucose oxidation in alkaline (0.1 M NaOH) solution. Further, we utilized the Cu-NPs/ZnO composite modified electrode as an electrochemical sensor for detection of glucose. This glucose sensor showed a linear relationship in the range from 1 × 10^? 6 M to 1.53 × 10^? 3 M and the detection limit (S/N = 3) was found to be 2 × 10^? 7 M. The Cu-NPs/ZnO composite as a non-enzymatic glucose sensor presents a number of attractive features such as high sensitivity, stability, reproducibility, selectivity and fast response. The applicability of the proposed method to the determination of glucose in human urine samples was demonstrated with satisfactory results.     

Annealing effect on the microstructure and photoluminescence of ZnO thin films

Zinc oxide thin films have been obtained by pulsed laser ablation of a ZnO target in O₂ ambient at a pressure of 0.13 Pa using a pulsed Nd:YAG laser. ZnO thin films deposited on Si (1 1 1) substrates were treated at annealing temperatures from 400 °C up to 800 °C after deposition. The structural and optical properties of deposited thin films have been characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, photoluminescence spectra, resistivity and IR absorption spectra. The results show that the obtained thin films possess good single crystalline with hexagonal structure at annealing temperature 600 °C. Two emission peaks have been observed in photoluminescence spectra. As the post-annealing temperature increase, the UV emission peaks at 368 nm is improved and the intensity of blue emission at 462 nm decreases, which corresponds to the increasing of the optical quality of ZnO film and the decreasing of Zn interstitial defect, respectively. The best optical quality for ZnO thin films emerge at post-annealing temperature 600 °C in our experiment. The measurement of resistivity also proves the decrease of defects of ZnO films. The IR absorption spectra of sample show the typical Zn–O bond bending vibration absorption at wavenumber 418 cm⁻¹.     

Highly stable,protein capped gold nanoparticles as effective drug delivery vehicles for amino-glycosidic antibiotics

A method for the production of highly stable gold nanoparticles (Au NP) was optimized using sodium borohydride as reducing agent and bovine serum albumin as capping agent. The synthesized nanoparticles were characterized using UV–visible spectroscopy, transmission electron microscopy, X‐ray diffraction (XRD) and dynamic light scattering techniques. The formation of gold nanoparticles was confirmed from the appearance of pink colour and an absorption maximum at 532 nm. These protein capped nanoparticles exhibited excellent stability towards pH modification and electrolyte addition. The produced nanoparticles were found to be spherical in shape, nearly monodispersed and with an average particle size of 7.8 ± 1.7 nm. Crystalline nature of the nanoparticles in face centered cubic structure is confirmed from the selected‐area electron diffraction and XRD patterns. The nanoparticles were functionalized with various amino-glycosidic antibiotics for utilizing them as drug delivery vehicles. Using Fourier transform infrared spectroscopy, the possible functional groups of antibiotics bound to the nanoparticle surface have been examined. These drug loaded nanoparticle solutions were tested for their antibacterial activity against Gram-negative and Gram-positive bacterial strains, by well diffusion assay. The antibiotic conjugated Au NP exhibited enhanced antibacterial activity, compared to pure antibiotic at the same concentration. Being protein capped and highly stable, these gold nanoparticles can act as effective carriers for drugs and might have considerable applications in the field of infection prevention and therapeutics.     

Fabrication of large-scale ultra-fine Cd-doped ZnO nanowires

We demonstrate bulk synthesis of highly crystal Cd-doped ZnO nanowires by using (Cd + Zn) powders at 600 °C. These mass ultra-fine ZnO nanowires with about 0%, 1%, 4% and 8% Cd so obtained have been characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), selected area electron diffraction (SAED) and high-resolution TEM (HRTEM). They have the uniform diameter of about 20 nm and several hundred microns in length. The growth of the as-synthesized nanowires is suggested for self-catalyzed vapor–liquid–solid.     

The properties of ethanol gas sensor based on Ti doped ZnO nanotetrapods

An ethanol gas sensor was fabricated based on Ti doped ZnO nanotetrapods which were prepared by chemical vapor deposition (CVD) of ZnO nanotetrapods followed by co-annealing with TiO₂ powder. X-ray diffraction (XRD), Raman spectra and scanning electron microscopy (SEM) were used to characterize the morphology and structure of the as-obtained sample and the ethanol-sensing characteristics of the device were investigated. ZnO:Ti sensors show higher gas response than ZnO counterparts towards 100 ppm ethanol gas at a temperature of 260 °C. The recovery times of the devices are 3.1 min for ZnO:Ti and 10.1 min for ZnO, respectively. The enhancement of sensing properties of ZnO:Ti tetrapods indicates the potential application for fabricating low power and highly sensitive gas sensors.     

Anti-amyloidogenic activity of glutathione-covered gold nanoparticles

This study is an investigation of the effect of biocompatible glutathione-covered gold nanoparticles (AuSG_7) with an average size of 3 nm on the amyloid fibrils of hen egg-white lysozyme. The anti-amyloid activity of AuSG_7 nanoparticles on this protein was monitored with thioflavin T assay, atomic force microscopy and transmission electron microscopy. The study found that AuSG_7 nanoparticles in vitro depolymerize the amyloid aggregates and inhibit lysozyme aggregate formation. The ability to inhibit amyloid formation and promote amyloid disassembly has concentration-dependent characteristics: the concentration of nanoparticles at which inhibition is half maximal (IC₅₀) was found to be 6.19 μg/mL, and the concentration at which depolymerization is half maximal (DC₅₀) was found to be 8.26 μg/mL.