共查询到19条相似文献,搜索用时 140 毫秒
1.
2.
3.
病房呼叫系统是快速处理病人请求的重要装置,传统的病房呼叫系统缺乏根据病情对病房优先选择的能力,功能单一.本文基于单片机AT89C52设计具有优先选择功能的病房呼叫系统,采用独立按键输入病房号,利用单片机编程处理数据,当有多间病房同时呼叫时对应指示灯同时亮,但在数码管上只显示优先级别高的病房号,并伴有报警提示铃响. 相似文献
4.
介绍一种利用8031单片机实现的病房呼叫装置。该机除具备普遍呼叫仪的主要功能外,还能记忆10天内各次呼叫的病号、呼叫时间、护士响应时间等多项数据,并可随时进行打印、集服务,管理和记录等多种功能于一身。 相似文献
5.
无线病房呼叫系统的设计 总被引:3,自引:0,他引:3
介绍利用单片机的串行全双工通信和高频发射接收电路设计的多路无线医院病房呼叫系统,该系统具有床号、呼叫次数显示、翻查、回复等功能,用于医院病房对护理总台的呼叫,省略了复杂的布线,操作简单,使用方便. 相似文献
6.
基于单片机的病房呼叫系统设计 总被引:2,自引:0,他引:2
利用单片机设计了病房呼叫系统,分析了硬件电路与软件设计。该系统采用电源载波技术,利用系统的两芯电源线,实现语音信号和呼叫信号的交换。系统主机由MC88051单片机实现,呼叫分机选用PIC12C508单片机,显示主控芯片选择51类的AT89C2051单片机,通信方式采用串行异步半双工通信方式。系统具有可靠性高、成本低、功能强大、安装方便等优点,具有较强的实用价值。 相似文献
7.
8.
9.
本文首先阐述了基于SC1128的病房呼叫系统的基本组成以及一些相关的硬件设计和软件设计。然后,基于单片机多机通讯的基本概念,以SC1128扩频通信芯片为基础,辅以外围电路,设计了一个利用低压电力线传输数据的病房呼叫系统。该系统具有较广泛的实用意义,可应用于医院和远程医疗。 相似文献
10.
11.
12.
13.
ATM switching platforms are well suited for transporting multimedia streams with quality-of-service (QOS) requirements. This paper describes the system design of a high performance connection management system for xbind, a flexible open programmable signaling system for ATM switching platforms. The latency and throughput of call processing is improved by caching, message aggregation, and processing of requests in parallel. Using a set of general purpose UNIX work stations, we are able to attain a maximum throughput of close to 600000 call operations/h (setup and delete) with an average call setup time of 85 ms. With a low traffic load of 3600 call operations/h, an average call setup latency of 11 ms can be obtained. The system is adaptive. By adjusting various control parameters, the connection manager(s) can be dynamically configured to trade off between throughput and call setup time 相似文献
14.
15.
12580系统精细化营销涉及多种数据类型.通过分析和设计,实现了12580系统精细化营销支撑模块.同时,也分析了支撑模块架构对营销案的迅速支撑和高可扩展性等优点,为今后12580乃至其它业务系统的后续系统开发总结相应的设计原则和经验. 相似文献
16.
直接序列码分多址接入(DS-CDMA)已成为下一代无线蜂窝网络中提供高速多媒体业务的主要接入技术。TD-SCDMA蜂窝网络与时分多址(TDMA)/频分多址(FDMA)网络有很大差别,前者独有的特征可用于提高系统容量。文中描述了DS-CDMA蜂窝网络中的资源管理,指出在资源管理机制设计中面临的主要挑战,讨论了资源管理的关键问题,包括拥塞控制、速率和功率控制、蜂窝规划和呼叫接入控制。 相似文献
17.
A video-on-demand (VoD) system provides a service which enables a user of the system to request in real time the transmission of a video stream from a collection of available video material. This paper suggests a conceptual model that subclassifies the VoD control and management procedures into three management levels: session, call, and connection. The session management is represented by a finite state machine (FSM) that translates user commands into call layer activities. The states in the session FSM represent active calls between the set-top boxes (STBs) and other entities, whereas the arcs represent distributed protocols for set-up and take-down of calls. This model is used in order to analyze the relationship between the procedures in the various management levels and to discuss the options and trade-offs involved in the design of a VoD session 相似文献
18.
19.
介绍呼叫中心系统的结构和组成各部分设备的用途,以及呼叫中心应用系统的主要功能和在广电网络的实际应用,为广电网络呼叫中心的建设和管理提供参考。 相似文献