Study on flame retardance of co‐microencapsulated ammonium polyphosphate and dipentaerythritol in polypropylene

Co‐microencapsulated ammonium polyphosphate and dipentaerythritol [M(A&D)] was prepared using a melamine‐formaldehyde (MF) resin by in situ polymerization method, and characterized by XPS. The co‐microencapsulation of ammonium polyphosphate and dipentaerythritol (DPER) leads to a great improvement in water solubility of the additives. The flame retardant effect of M(A&D) in polypropylene (PP) is evaluated using limiting oxygen index (LOI) and UL 94 test, and the water resistance of the PP/M(A&D) composites is also studied. The flame retardant properties and water resistance of the PP/M(A&D) composites are much better than the ones of the PP/APP/DPER composites. Moreover, the thermal stability of the PP/M(A&D) composites is improved compared with the PP/APP/DPER composites. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Preparation of a novel phosphorus‐ and nitrogen‐containing flame retardant and its synergistic effect in the intumescent flame‐retarding polypropylene system

A novel phosphorus‐ and nitrogen‐containing flame retardant (melamine phytate) was synthesized via the reaction between melamine and phytic acid. The chemical structure of melamine phytate (MPA) was confirmed by Fourier transform‐infrared spectra (FT‐IR) and elemental analysis. And the thermal behavior of MPA investigated by thermogravimetric analysis (TGA) demonstrates that MPA possesses a good char‐forming ability at high temperature. Besides, limiting oxygen index (LOI) and vertical burning tests (UL‐94) illustrate that polypropylene/melamine phytate/dipentaerythritol (PP/MPA/DPER) (70/22.5/7.5) can reach the LOI value of 28.5% and achieve V‐0 rating at the flame retardant loading of 30 wt%. Except that, the thermal weight loss of MPA and DPER in PP composites was investigated by TGA in detail. Moreover, the char residue of PP composite after combustion was systematically analyzed by FT‐IR, scanning electron microscope (SEM) and X‐ray photoelectron spectroscopy (XPS), which can further propose and confirm the flame retardant mechanism. POLYM. COMPOS., 36:1606–1619, 2015. © 2014 Society of Plastics Engineers     

Microencapsulation of APP‐I and influence of microencapsulated APP‐I on microstructure and flame retardancy of PP/APP‐I/PER composites

In this article, the microencapsulated ammonium polyphosphate crystalline with form I (APP‐I) coated with melamine‐formaldehyde (MF) was prepared by in situ polymerization. Results of Fourier transform infrared spectra (FTIR), thermogravimetry (TG) energy dispersive spectroscopy (EDS), and scanning electron microscopy (SEM) demonstrate that APP‐I is successfully microencapsulated with MF. Compared with APP‐I, the microencapsulated APP‐I with MF (MFAPP‐I) is of much smaller spheroidal particle size and lower solubility in water. In this study, the polypropylene (PP)/APP‐I/penpaerythritol (PER) and PP/MFAPP‐I/PER composites are prepared, and flame retardancy, thermal stability, and microstructure of corresponding composites are carefully investigated by limiting oxygen index (LOI), UL‐94 testing, TG, EDS, and SEM. Experimental results show that PP/MFAPP‐I/PER composites have advantages over PP/APP‐I/PER composites in terms of flame retardant properties and water resistance. Results of TG, SEM, and EDS show that the microencapsulated APP‐I with MF resin is conducive to increase the amount of residual yield and improve thermal stability of PP/MFAPP‐I/PER composites and the compatibility and dispersion of MFAPP‐I. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation of a chitosan‐based flame‐retardant synergist and its application in flame‐retardant polypropylene

A novel flame‐retardant synergist, chitosan/urea compound based phosphonic acid melamine salt (HUMCS), was synthesized and characterized by Fourier transform infrared spectroscopy and ³¹P‐NMR. Subsequently, HUMCS was added to a fire‐retardant polypropylene (PP) compound containing an intumescent flame‐retardant (IFR) system to improve its flame‐retardant properties. The PP/IFR/HUMCS composites were characterized by limiting oxygen index (LOI) tests, vertical burning tests (UL‐94 tests), microscale combustion calorimetry tests, and thermogravimetric analysis to study the combustion behavior and thermal stability. The addition of 3 wt % HUMCS increased the LOI from 31.4 to 33.0. The addition of HUMCS at a low additive amount reduced the peak heat‐release rate, total heat release, and heat‐release capacity obviously. Furthermore, scanning electron micrographs of char residues revealed that HUMCS could prevent the IFR–PP composites from forming a dense and compact multicell char, which could effectively protect the substrate material from combusting. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40845.     

Preparation,characterization and properties of a halogen‐free phosphorous flame‐retarded poly(butylene terephthalate) composite based on a DOPO derivative

A phosphorous flame retardant (DOPO‐MAH) was synthesized through the reaction between of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) and maleic anhydride (MAH) and confirmed by FT‐IR, ¹H NMR, and ³¹P NMR techniques. The obtained flame retardant was then melt blended with poly(butylene terephthalate) (PBT) to prepare flame retardant PBT/DOPO‐MAH composites. The composites were characterized by LOI, UL‐94, and mechanical tests as well as scanning electron microscopy, thermogravimetric analysis, and differential scanning calorimetry analysis. On adding 20 wt % DOPO‐MAH, LOI increased from 20.9 to 25.7 and the UL‐94 V‐0 rating was achieved, whereas the tensile and flexural properties were notably improved. Torque‐time profile during the melt blending and intrinsic viscosity of the composite indicated that DOPO‐MAH acted as both flame retardant and chain extender for the PBT matrix. The results showed that PBT/DOPO‐MAH composite is a promising material for its good comprehensive properties. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1301‐1307, 2013     

Effect of a novel phosphorus‐containing compound on the flame retardancy and thermal degradation of intumescent flame retardant polypropylene

A novel flame retardant, tetra(5,5‐dimethyl‐1,3‐ dioxaphosphorinanyl‐2‐oxy) neopentane (DOPNP), was synthesized successfully, and its structure was characterized by FT‐IR, ¹H NMR, and ³¹P NMR. The thermogravimetric analysis (TGA) results demonstrate that DOPNP showed a good char‐forming ability. Its initial decomposition temperature was 236.4°C based on 1% mass loss, and its char residue was 41.2 wt % at 600°C, and 22.9 wt % at 800°C, respectively. The flame retardancy and thermal degradation behavior of novel intumescent flame‐retardant polypropylene (IFR‐PP) composites containing DOPNP were investigated using limiting oxygen index (LOI), UL‐94 test, TGA, cone calorimeter (CONE) test, and scanning electron microscopy (SEM). The results demonstrate that DOPNP effectively raised LOI value of IFR‐PP. When the loading of IFR was 30 wt %, LOI of IFR‐PP reached 31.3%, and it passed UL‐94 V‐0. TGA results show that DOPNP made the thermal decomposition of IFR‐PP take place in advance; reduced the thermal decomposition rate and raised the residual char amount. CONE results show that DOPNP could effectively decrease the heat release rate peak of IFR‐PP. A continuous and compact char layer observed from the SEM further proved the flame retardance. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Component ratio effects of hyperbranched triazine compound and ammonium polyphosphate in flame‐retardant polypropylene composites

A hyperbranched derivative of triazine group (EA) was synthesized by elimination reaction between ethylenediamine and cyanuric chloride. The different‐mass‐ratio EA and ammonium polyphosphate (APP) were mixed and blended with polypropylene (PP) in a constant amount (25%) to prepare a series of EA/APP/PP composites. The component ratio effect of EA/APP on the flame‐retardant property of the EA/APP/PP composites was investigated using the limiting oxygen index (LOI), vertical burning (UL‐94), and cone calorimetry tests. Results indicated that the EA/APP/PP (7.50/17.50/75.00) composite with the appropriate EA/APP mass ratio had the highest LOI, UL94 V‐0 rating, lowest heat release rate, and highest residue yield. These results implied that the appropriate EA/APP mass ratio formed a better intumescent flame‐retardant system and adequately exerted their synergistic effects. Furthermore, average effective combustion heat values revealed that EA/APP flame retardant possessed the gaseous‐phase flame‐retardant effect on PP. Residues of the EA/APP/PP composites were also investigated by scanning electron microscopy, Fourier‐transform infrared, and X‐ray photoelectron spectroscopy. Results demonstrated that the appropriate EA/APP mass ratio can fully interact and lock more chemical constituents containing carbon and nitrogen in the residue, thereby resulting in the formation of a dense, compact, and intumescent char layer. This char layer exerted a condensed‐phase flame‐retardant effect on EA/APP/PP composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41006.     

An easy‐to‐obtain silicone‐containing flame retardant and its effects on the combustion of polycarbonate

A novel silicone‐containing flame retardant (HSOBA) synthesized from hydrogen‐containing silicone oil and Bisphenol A via a simple approach has been incorporated into polycarbonate (PC) matrix to study its effects on the flame retardancy. The flame retardancy of PC/HSOBA composites is investigated by limiting oxygen index (LOI), vertical burning tests (UL‐94), and cone calorimeter measurement. The LOI value of the composites is 31.7 and the UL‐94 rating reaches V‐0, when the content of HSOBA is 3 wt %. Cone calorimeter data confirm that the HSOBA acts as an effective additive functioning both as flame retardants and as smoke suppressant. Evolution of the thermal behaviors of the composites tested by TGA, the morphological structures, and the constituent of char residue after LOI tests characterized by scanning electronic microscopy‐energy‐dispersive X‐ray analysis were used to explain the possible flame‐retardant mode. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Influence of polyamide 6 as a charring agent on the flame retardancy,thermal, and mechanical properties of polypropylene composites

In this work, polyamide 6 (PA6) as a charring agent has been used in combination with thermoplastic polyurethane (TPU)‐microencapsulated ammonium polyphosphate (MTAPP) forming intumescent flame retardants (IFRs) which applies in polypropylene (PP). The effects of the IFRs on the flame retardancy, morphology of char layers, water resistance, thermal properties and mechanical properties of flame‐retardant PP composites are investigated by limiting oxygen index (LOI), UL‐94 test, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and mechanical properties test. The results show that the PP/MTAPP/PA6 composites exhibit much better flame‐retardant performances than the PP/MTAPP composites. The higher LOI values and UL‐94 V‐2 of the PP/MTAPP composites with suitable amount of PA6 are obtained, which is attributed to the thick and compact char layer structure evidenced by SEM. The results from TGA and DSC demonstrate that the introduction of PA6 into PP/MTAPP composites has a great effect on the thermal stability and crystallization behaviors of the composites. Furthermore, the mechanical properties of PP/MTAPP/PA6 composites are also improved greatly due to the presence of PA6 as a charring agent. POLYM. ENG. SCI., 55:1355–1360, 2015. © 2015 Society of Plastics Engineers     

Surface microencapsulated ammonium polyphosphate with beta‐cyclodextrin and its application in wood‐flour/polypropylene composites

In order to improve the hydrophilicity of ammonium polyphosphate (APP), as well as its compatibility with composite matrix, in this research, beta‐cyclodextrin (β‐CD) was crosslinked by polydiphenylmethane diisocyanate (PMDI) and used as clothing to prepare microencapsulated APP (MCAPP) via polymerization in situ . Then, APP and MCAPP were mixed with wood‐flour and polypropylene to manufacture wood‐flour/polypropylene composites (WPCs) by hot pressing. Both APP and MCAPP were characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), water solubility tests, and water contact angle (WCA) tests. Limiting oxygen index (LOI) and cone calorimetry tests were used to investigate the flame retardancy of WPCs. Moreover, laser Raman spectroscopy and real‐time FTIR (RT‐FTIR) were used to explore the flame retardant mechanism. Results indicated that APP was successfully coated by the crosslinked β‐CD. MCAPP showed lower water solubility and better surface hydrophobicity, and WPC/MCAPP performed better flame retardnacy and mechanical properties. POLYM. COMPOS., 38:2312–2320, 2017. © 2015 Society of Plastics Engineers     

Vinyl polysiloxane microencapsulated ammonium polyphosphate and its application in flame retardant polypropylene

Vinyl polysiloxane microencapsulated ammonium polyphosphate (MAPP) was prepared by a sol-gel method using vinyltrimethoxysilane as a precursor to improve its thermal stability and hydrophobicity. The MAPP was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and thermogravimetric analyzer (TGA). The results showed that ammonium polyphosphate (APP) was successfully coated with vinyl polysiloxane. MAPP and pentaerythritol (PER) were used together to improve the flame retardancy of polypropylene (PP). The flame retardant properties of PP composites were investigated by limiting oxygen index (LOI), UL-94 test, TGA and SEM. When the MAPP was added as a flame retardant, with PER as a char forming agent, the LOI of PP/MAPP/PER composites was 33.1%, and it reached the UL-94 V-0 level. The results also demonstrated that the flame retardant properties of PP/MAPP/PER composites were better than those of PP/APP/PER composites at the same loading. Moreover, the addition of flame retardant and carbon forming agent could promote the crystallization behavior of PP.     

Flammability and thermal degradation of intumescent flame‐retardant polypropylene composites

The flammability of polypropylene (PP) composites containing intumescent flame‐retardant additives, i.e., melamine pyrophosphate (MPP) and 1‐oxo‐4‐hydroxymethyl‐2,6,7‐trioxa‐1‐phosphabicyclo[2.2.2]octane (PEPA) was characterized by limiting oxygen index (LOI), UL 94 test, and cone calorimeter. In addition, the thermal degradation of the composites was studied using thermogravimetric analysis (TG) and real‐time Fourier transform infrared (RTFTIR). It has been found that the PP composite only containing MPP (or PEPA) does not show good flame retardancy even at 30% additive level. Compared with the PP/MPP binary composite, the LOI values of the PP/MPP/PEPA ternary composites at the same additive loading are all increased, and UL 94 rating of the ternary composite (PP3) studied is raised to V‐0 rating from no rating (PP/MPP). The cone calorimeter results show that the heat release rate of some ternary composites decreases in comparison with the binary composite. It is noted from the TG data that initial decomposition temperatures of ternary composites are lower than that of the binary composites. The RTFTIR study indicates that the PP/MPP/PEPA composites have higher thermal oxidative stability than the pure PP. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Synergistic effect of expandable graphite and aluminum hypophosphite on flame‐retardant properties of rigid polyurethane foam

A series of flame retarding rigid polyurethane foam (RPUF) composites based on expandable graphite (EG) and aluminum hypophosphite (AHP) were prepared by the one‐pot method. The properties were characterized by limiting oxygen index (LOI) test, cone calorimeter test, thermogravimetric analysis (TGA), real‐time Fourier transform‐infrared spectra (RT‐FT‐IR), X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), etc. The results indicate that both EG and AHP could enhance the flame retardency of RPUF composites. Besides, the flame retardant effect of EG was better than that of AHP. The results also show that partial substitution of EG with AHP could improve the flame retardency of RPUF, and EG and AHP presented an excellent synergistic effect on flame retardancy. What is more, compared with RPUF/20EG and RPUF/20AHP, the heat release rate (HRR) and total heat release (THR) of RPUF/15EG/5AHP were lower.TGA results indicate that partial substitution of EG with AHP could improve the char residue which provided better flame retardancy for RPUF composites. The thermal degradation process of RPUF composites and the chemical component of the char residue were investigated by RT‐FT‐IR and XPS. And the results prove that RPUF/15EG/5AHP had higher heat resistance in the later stage. Compared with the RPUF composites filled with EG, a better cell structure and mechanical properties were observed with the substitution of AHP for part of EG. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42842.     

Effects of organopalygorskite on intumescent flame‐retarded polypropylene

The effect of organopalygorskite (OPGS) on an intumescent flame retardant (IFR) low‐density polypropylene (PP) has been investigated using the limited oxygen index (LOI), vertical burning test (UL‐94) and thermogravimetric analysis (TGA). The results of the LOI and UL‐94 tests indicate that the addition of OPGS substantially increases the LOI value for PP/IFR at a OPGS to IRF mass ratio of 2/28 with 30 wt% of total flame retardant. In addition, the samples pass the V‐0 rating in the UL‐94 tests. The results indicate that the addition of 2.0 wt% of OPGS simultaneously increases the tensile strength and bending strength of PP/IFR. J. VINYL ADDIT. TECHNOL., 24:281–287, 2018. © 2016 Society of Plastics Engineers     

Investigations of thermal degradation behavior and fire performance of halogen‐free flame retardant poly(1,4‐butylene terephthalate) composites

This work aims to develop halogen‐free poly(1,4‐butylene terephthalate) (PBT) composites with enhanced flame retardancy using ecofriendly flame retardants, aluminum hypophosphite (AHP) and melamine derivatives (melamine polyphosphate and melamine cyanurate). Microscale combustion calorimetry and thermal gravimetric analysis/infrared spectrometry (TG‐IR) technique were used to investigate the potential fire hazards of these PBT composites. For the PBT composites with the incorporation of AHP and melamine derivatives, the heat release capacity (HRC) which is an indicator of a material fire hazard was significantly reduced, and the intensities of a variety of combustible or toxic gases detected by TG‐IR technique were remarkably decreased. Moreover, a loading of 20 wt % flame retardant mixture fulfilled the PBT composites high limited oxygen index (LOI) and V‐0 classification in UL 94 testing. An intumescent flame retarded mechanism was speculated in this work, because numerous bubble‐like char residues were found on the surface of the samples containing flame retardant mixture after LOI testing. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

An efficient approach to improving fire retardancy and smoke suppression for intumescent flame‐retardant polypropylene composites via incorporating organo‐modified sepiolite

In this work, an efficient approach to improving the fire retardancy and smoke suppression for intumescent flame‐retardant polypropylene (PP) composites is developed via incorporating functionalized sepiolite (organo‐modified sepiolite [ONSep]). The PP composites with different amounts of intumescent flame retardants and ONSep were prepared by melt compounding. The morphology, thermal behavior, fire retardancy, smoke suppression, and mechanical property of flame‐retardant PP composites were studied. The results indicate an appropriate amount of ONSep in the flame‐retardant PP composites can increase thermal degradation temperature and char formation as well as a reduction of the peak heat release rate and total heat release; moreover, the addition of ONSep significantly decreases the CO production, total smoke production, smoke production rate, and smoke temperature. Simultaneously, the impact strength of intumescent flame‐retardant PP composite is also maintained by introducing an appropriate amount of ONSep as compared with that without ONSep.     

Flame retardancy and water resistance of novel intumescent flame‐retardant oil‐filled styrene–ethylene–butadiene–styrene block copolymer/polypropylene composites

A novel halogen‐free flame‐retardant composite consisting of an intumescent flame retardant (IFR), oil‐filled styrene–ethylene–butadiene–styrene block copolymer (O‐SEBS), and polypropylene (PP) was studied. On the basis of UL‐94 ratings and limiting oxygen index (LOI) data, the IFRs consisted of a charring–foaming agent, ammonium polyphosphate, and SiO₂ showed very effective flame retardancy and good water resistance in the IFR O‐SEBS/PP composite. When the loading of IFR was only 28 wt %, the IFR–O‐SEBS/PP composite could still attain a UL‐94 V‐0 (1.6 mm) rating, and its LOI value remained at 29.8% after a water treatment at 70°C for 168 h. Thermogravimetric analysis data indicated that the IFR effectively enhanced the temperature of the main thermal degradation peak of the IFR–O‐SEBS/PP composites because of the formation of abundant char residue. The flammability parameters of the composites obtained from cone calorimetry testing demonstrated that water treatment almost did not affect the flammability behavior of the composite. The morphological structures of the char residue and fractured surfaces of the composites were not affected by the water treatment. This was attributed to a small quantity of IFR extracted from the composite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39575.     

A novel halogen‐free intumescent flame retardant containing phosphorus and nitrogen and its application in polypropylene systems

A novel halogen‐free intumescent flame retardant, pentaerythritol spirobisphosphoryl‐dicyandiamide (SPDC), was synthesized and characterized by FTIR, ¹H NMR, and ³¹P NMR spectra. The new flame retardant was used in polypropylene (PP) to prepare flame‐retardant materials whose flammability and thermal behavior were studied by the limiting oxygen index (LOI) method, thermogravimetric analysis (TGA), and cone calorimetry (CONE). The mechanical properties were also investigated. The results indicated that when the addition of SPDC reached 30 wt%, the material showed both excellent flame retardancy and anti‐dripping abilities for PP. Moreover, the LOI value of the PP‐IFR(30%) was 32.5, and it passed the UL‐94 V‐0 rating test. The CONE results revealed that in PP, SPDC(30%) significantly decreased the peak heat release, total heat release, and smoke relative to their values for pure PP. The morphological structures observed by SEM demonstrated that SPDC could promote the formation of a homogeneous and compact intumescent char layer. The TGA data showed that SPDC could enhance the thermal stability of PP and effectively increase the char residue formation. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Synthesis of phosphorus‐containing flame‐retardant antistatic copolymers and their applications in polypropylene

By adjusting the molar ratios of antistatic monomer of octyl phenol ethylene oxide acrylate (denoted as AS), rigid monomer of methyl methacrylate (denoted as MMA), and flame‐retardant monomer of 2‐(phosphoryloxymethyl oxyethylene) acrylate (denoted as FR), a series of flame‐retardant antistatic copolymers poly (octyl phenol ethylene oxide acrylate‐co‐methyl methacrylate‐co‐phosphoryloxymethyl oxyethylene acrylate) (donated as AMF) were synthesized through radical polymerization. Among the obtained copolymers, two copolymers, AMF162 (the feed molar ratio of AS, MMA, and FR as 1 : 6 : 2) and AMF1104 (the feed molar ratio of AS, MMA, and FR as 1 : 10 : 4) with different concentrations were added into polypropylene (PP) to prepare PP‐AMF162 and PP‐AMF1104 series of composites. The thermal stability, limiting oxygen index, the antistatic property, and mechanical properties of PP composites were tested and analyzed. PP‐AMF162 series composites have excellent antistatic effect. When the AMF162 content was equal to or <15 wt %, the impact strength of PP‐AMF162 composites was higher than that of pure PP. The results indicated that copolymer AMF162 was a suitable flame‐retardant and antistatic additive for PP. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41677.     

Synergistic effects of tetrabutyl titanate on intumescent flame‐retarded polypropylene

The synergistic mechanism of tetrabutyl titanate (TBT) in the intumescent flame‐retardant polypropylene (PP) composites was investigated in this work. The intumescent flame‐retardant was composed of pentaerythritol (PER) as a carbonizing agent ammonium polyphosphate (APP) as a dehydrating agent and blowing agent. Five different concentrations (1, 1.25, 1.5, 1.75, 2 wt %) of TBT were incorporated into flame retardant formulation to investigate the synergistic mechanism. The thermal degradation and flammability of composites were characterized by thermogravimetric analysis (TGA), limiting oxygen index (LOI), and UL‐94 tests. The morphology and chemical structure of char layer was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and energy dispersive spectrometer (EDS). The results showed that LOI was increased from 27.8 to 32.5%, with the increase of TBT content from 0 to 1.5 wt %. Results from SEM, and FTIR demonstrated that TBT could react with APP and PER to form the stable char layer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4255–4263, 2013