Non‐Isothermal Kinetic Study of the Thermal Decomposition of Melamine 3‐Nitro‐1,2,4‐triazol‐5‐one Salt

Study on thermal behavior of 3‐nitro‐1,2,4‐triazol‐5‐one (NTO) salts was required to obtain important data for application purposes. These compounds have been shown to be useful intermediates for gun propellant ingredients, high energetic ballistic modifiers for solid propellants and other potential applications. In this paper, thermal decomposition and non‐isothermal kinetics of melamine 3‐nitro‐1,2,4‐triazol‐5‐one salt (MNTO) were studied under non‐isothermal conditions by DSC and TG methods. The kinetic parameters were obtained from analysis of the DSC and TG curves by Kissinger and Ozawa methods. The critical temperature of thermal explosion (T_b) was 574 K. The results show that MNTO is thermally more stable than NTO when compared in terms of the critical temperature of thermal explosion. Finally, the values of ΔS^#, ΔH^#, and ΔG^# of its decomposition reaction were calculated.     

Synthesis,Crystal Structure,and Thermal Behaviors of 3‐Nitro‐1,5‐bis(4,4′‐dimethylazide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP)

The energetic material, 3‐nitro‐1,5‐bis(4,4′‐dimethyl azide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP), was firstly synthesized by means of Click Chemistry using 1,5‐diazido‐3‐nitrazapentane as main material. The structure of NDTAP was confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy; mass spectrometry, and elemental analysis. The crystal structure of NDTAP was determined by X‐ray diffraction. It belongs to monoclinic system, space group C2/c with crystal parameters a=1.7285(8) nm, b=0.6061(3) nm, c=1.6712(8) nm, β=104.846(8)°, V=1.6924(13) nm³, Z=8, μ=0.109 mm⁻¹, F(000)=752, and D_c=1.422 g cm⁻³. The thermal behavior and non‐isothermal decomposition kinetics of NDTAP were studied with DSC and TG‐DTG methods. The self‐accelerating decomposition temperature and critical temperature of thermal explosion are 195.5 and 208.2 °C, respectively. NDTAP presents good thermal stability and is insensitive.     

Study on the Compatibility of Tetraethylammonium Decahydrodecaborate (BHN) with some Energetic Components and Inert Materials

The compatibility of tetraethylammonium decahydrodecaborate (BHN) with some energetic components and inert materials of solid propellants was studied by DSC method, where glycidyl azide polymer (GAP), cyclotrimethylenetrinitramine (RDX), cyclotetramethylenetetranitroamine (HMX), lead 3‐nitro‐1,2,4‐triazol‐5‐onate (NTO‐Pb), hexanitrohexaazaisowurtzitane (CL‐20), 3,4‐dinitrofurzanfuroxan (DNTF), N‐guanylurea‐dinitramide (GUDN), aluminum powder (Al, particle size=12.18 μm) and magnesium powder (Mg, particle size: 44–74 μm) were used as energetic components and polyoxytetramethylene‐co‐oxyethylene (PET), polyethylene glycol (PEG), addition product of hexamethylene diisocyanate and water (N‐100), hydroxyl terminated polybutadiene (HTPB), cupric adipate (AD‐Cu), cupric 2,4‐dihydroxy‐benzoate (β‐Cu), lead phthalate (ϕ‐Pb), carbon black (C. B.), aluminum oxide (Al₂O₃), 1,3‐dimethyl‐1,3‐diphenyl urea (C₂), di‐2‐ethylhexyl sebacate (DOS) and potassium perchlorate (KP), were used as inert materials. It was concluded that the binary systems of BHN with NTO‐Pb, CL‐20, aluminum powder, magnesium powder, PET, PEG, N‐100, AD‐Cu, β‐Cu, ϕ‐Pb, C. B., Al₂O₃, C₂, DOS, and KP are compatible, and systems of BHN with GAP and HMX are slightly sensitive, and with RDX, DNTF, and GUDN are incompatible. The impact and friction sensitivity data of BHN and BHN in combination with the energetic materials under present study were obtained, and there was no consequential affiliation between sensitivity and compatibility.     

An Azido Ester Plasticizer, 1,3‐Di(Azidoacetoxy)‐2,2‐Di(Azidomethyl)Propane (PEAA): Synthesis,Characterization and Thermal Properties

A polyazido compound, 1,3‐di(azidoacetoxy)‐2,2‐di(azidomethyl)propane (PEAA) was synthesized and identified. Thermal properties of PEAA, such as the glass transition temperature (T_g), differential scanning calorimetry (DSC) and thermogravimetric analysis (DTG) were investigated in detail. Two steps in the course of thermal decomposition of PEAA were observed clearly, and some gases, carbon monoxide, carbon dioxide, nitrogen, hydrocyanic acid, methane and 2‐methyl‐1,3‐butadiene were identified as decomposition products by in situ cell FTIR. The pyrolysis mechanism was also proposed.     

Studies on Energetic Compounds Part 23: Preparation,Thermal and Explosive Characteristics of Transition Metal Salts of 5‐Nitro‐2,4‐Dihydro‐3H‐1,2,4‐Triazole‐3‐One (NTO)

Five transition metal salts of 5‐nitro‐2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐one, [namely M(NTO)_n⋅mH₂O where M is Ag, Hg, Cd, Cr, Fe where n=1,2,2,3,3 and m=1,2,2,8,2 respectively] were prepared and characterized (hereafter these compounds will be named as AgNTO, HgNTO, CdNTO, CrNTO and FeNTO, respectively). Their thermal decomposition was investigated by TG, DTA whereas explosive behaviour has been studied in terms of explosion delay, impact and friction sensitivities. Further, kinetic parameters have been derived using non‐isothermal TG data and mechanism of thermolysis has also been proposed. It seems that dehydration takes place prior to the evolution of NO₂ and the subsequent ring rupture yielding metal oxide. AgNTO on the other hand yields metallic silver. Dehydration in the case of HgNTO occurs in two steps: at each step one molecule is lost. All the salts are insensitive to impact and at the same time insensitive to friction up to 360 N.     

Synthesis and Characterization of Poly(3‐azidomethyl‐3‐methyl oxetane) by the Azidation of Poly(3‐mesyloxymethyl‐3‐methyl oxetane)

Poly(3‐azidomethyl‐3‐methyl oxetane) (PAMMO) was prepared by the azidation reaction of poly(3‐mesyloxymethyl‐3‐methyl oxetane) (PMMMO), which was synthesized by cationic ring‐opening polymerization of MMMO for the first time. Two azidation reaction methods of PMMMO were considered to obtain PAMMO securely and efficiently. The thermal decomposition performance of PAMMO was studied by TG/FTIR/MS. The result of TG showed that the thermal decomposition of PAMMO involved two steps. Combined with FT‐IR and MS of the escaping gases to investigate the decomposition products of PAMMO, it is found that the first step was mainly corresponding to the thermal decomposition of azide group ( N₃), and the second step was mainly corresponding to the thermal decomposition of the polyether backbone.     

Thermal analysis of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) irradiated under vacuum

Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) was irradiated by ⁶⁰Co γ‐rays (doses of 50, 100 and 200 kGy) under vacuum. The thermal analysis of control and irradiated PHBV, under vacuum was carried out by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The tensile properties of control and irradiated PHBV were examined by using an Instron tensile testing machine. In the thermal degradation of control and irradiated PHBV, a one‐step weight loss was observed. The derivative thermogravimetric curves of control and irradiated PHBV confirmed only one weight‐loss step change. The onset degradation temperature (T_o) and the temperature of maximum weight‐loss rate (T_p) of control and irradiated PHBV were in line with the heating rate (°C min^?1). T_o and T_P of PHBV decreased with increasing radiation dose at the same heating rate. The DSC results showed that ⁶⁰Co γ‐radiation significantly affected the thermal properties of PHBV. With increasing radiation dose, the melting temperature (T_m) of PHBV shifted to a lower value, due to the decrease in crystal size. The tensile strength and fracture strain of the irradiated PHBV decreased, hence indicating an increased brittleness. Copyright © 2004 Society of Chemical Industry     

Vapor Pressures,Mass Spectra and Thermal Decomposition Processes of Bis(2,2‐Dintropropyl)acetal (BDNPA) and Bis(2,2‐Dinitropropyl)formal (BDNPF)

Simultaneous thermogravimetric modulated beam mass spectrometry (STMBMS) and Fourier‐transform ion cyclotron resonance (FTICR) instruments have been used to measure the mass spectra, measure vapor pressures and evaluate the thermal decomposition mechanism of bis(2,2‐dinitropropyl)acetal (BDNPA) and bis(2,2‐dinitropropyl)formal (BDNPF). The high mass accuracy FTICR mass spectra provide the chemical formulas of the ion fragments formed in the mass spectra of BDNPA, BDNPF and their decomposition products, and provide a basis for predicting possible structures of the ion fragments. The heat of vaporization (Δ_vapH) and vapor pressure at 25 °C are 93.01±0.38 kJ/mol and 1.4532+0.40/−0.27 mPa for BDNPA, and 84.77±0.88 kJ/mol and 2.20+1.87/−1.07 mPa for BDNPF. STMBMS data support a nitro‐nitrite ( NO₂→ O NO) rearrangement mechanism for both compounds. Upon rearrangement, both NO and NO₂ are cleaved from the structure, thus producing a ketone radical. The nitro‐nitrite rearrangement begins to occur at appreciable rates between 160 and 180 °C. Additional decomposition products include amines, imines and amides, as well as CO₂ and H₂O at higher temperatures. STMBMS mass loss data suggest the formation of a residue during the decomposition of BDNPA and BDNPF. The major difference between the decomposition of the two compounds is the slower reaction rate of BDNPF. We postulate that the less sterically hindered formal carbon of BDNPF subjects it to interactions with an intermediate, thus forming a complex and delaying its release. Methods to elucidate complex thermal decomposition mechanisms from STMBMS data are illustrated.     

The kinetics of the thermal decomposition of poly(3‐hydroxybutyrate) and maleated poly(3‐hydroxybutyrate)

The thermal decomposition mechanism of maleated poly(3‐hydroxybutyrate) (PHB) was investigated by FTIR and ¹H NMR. The results of experiments showed that the random chain scission of maleated PHB obeyed the six‐membered ring ester decomposition process. The thermal decomposition behavior of PHB and maleated PHB with different graft degree were studied by thermogravimetry (TGA) using various heating‐up rates. The thermal stability of maleated PHB was evidently better than that of PHB. With increase in graft degree, the thermal decomposition temperature of maleated PHB gradually increased and then declined. Activation energy E_a as a kinetic parameter of thermal decomposition was estimated by the Flynn‐Wall‐Ozawa and Kissinger methods, respectively. It could be seen that approximately equal values of activation energy were obtained by both methods. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1789–1796, 2002; DOI 10.1002/app.10463     

Thermal Behavior and Specific Heat Capacity of 1‐t‐Butyl‐3,3‐dinitroazetidinium Perchlorate

1‐t‐Butyl‐3,3‐dinitroazetidinium perchlorate (TDNAZ ⋅ HClO₄) was synthesized, DSC and TG/DTG methods were used to study the thermal behavior of TDNAZ⋅HClO₄ under a non–isothermal condition. The intense exothermic decomposition process of DSC curves were analyzed to obtain its kinetic parameters. Continuous specific heat capacity (C _p) mode of micro–calorimeter was used to determine its C _p, its specific molar heat capacity (C _{p ,m}) was 365.70 J mol⁻¹ K⁻¹ at 298.15 K. The self‐accelerating decomposition temperature (T _SADT), thermal ignition temperature (T _TIT), and critical temperature of thermal explosion (T _b) were obtained to evaluate its thermal stability and safety. The above results of TDNAZ ⋅ HClO₄ were compared with those of 3,3‐dinitroazetidinium perchlorate (DNAZ ⋅ HClO₄), and the effect of tert‐butyl group on them was discussed.     

Synthesis,characterization, thermal stability,and compatibility properties of poly(vinyl p‐nitrobenzal acetal)‐g‐polyglycidylazides

A series of energetic polymers, poly(vinyl p‐nitrobenzal acetal)‐g‐polyglycidylazides (PVPNB‐g‐GAPs), are obtained via cross‐linking reactions of poly(vinyl p‐nitrobenzal acetal) (PVPNB) with four different molecular weights polyglycidylazides (GAPs) using toluene diisocyanate as cross‐linking agent. The structures of the energetic polymers are characterized by ultraviolet visible spectra (UV‐Vis), attenuated total reflectance‐Fourier transform‐infrared spectroscopy (ATR‐FT‐IR), ¹H nuclear magnetic resonance spectrometry (¹H NMR), and ¹³C nuclear magnetic resonance spectrometry (¹³C NMR). Differential scanning calorimetry (DSC) is applied to evaluate the glass‐transition temperature of the polymers. DSC traces illustrate that PVPNB‐g?2^#GAP, PVPNB‐g?3^#GAP, and PVPNB‐g?4^#GAP have two distinct glass‐transition temperatures, whereas PVPNB‐g?1^#GAP has one. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) are used to evaluate the thermal decomposition behavior of the four polymers and their compatibility with the main energetic components of TNT‐based melt‐cast explosives, such as cyclotetramethylene tetranitramine (HMX), cyclotrimethylene‐trinitramine (RDX), triaminotrinitrobenzene (TATB), and 2,4,6‐trinitrotoluene (TNT). The DTA and TGA curves obtained indicate that the polymers have excellent resistance to thermal decomposition up to 200°C. PVPNB‐g?4^#GAP also exhibits good compatibility and could be safely used with TNT, HMX, and TATB but not with RDX. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42126.     

Thermal decomposition behavior of oligo(4‐hydroxyquinoline)

In this study, the kinetic parameters and reaction mechanism of decomposition process of oligo(4‐hydroxyquinoline) synthesized by oxidative polymerization were investigated by thermogravimetric analysis (TGA) at different heating rates. TGA‐derivative thermogravimetric analysis curves showed that the thermal decomposition occurred in two stages. The methods based on multiple heating rates such as Kissinger, Kim–Park, Tang, Flynn–Wall–Ozawa method (FWO), Friedman, and Kissinger–Akahira–Sunose (KAS) were used to calculate the kinetic parameters related to each decomposition stage of oligo(4‐hydroxyquinoline). The activation energies obtained by Kissinger, Kim–Park, Tang, KAS, FWO, and Friedman methods were found to be 153.80, 153.89, 153.06, 152.62, 151.25, and 157.14 kJ mol^?1 for the dehydration stage, 124.7, 124.71, 126.14, 123.75, 126.19, and 124.05 kJ mol^?1 for the thermal decomposition stage, respectively, in the conversion range studied. The decomposition mechanism and pre‐exponential factor of each decomposition stage were also determined using Coats–Redfern, van Krevelen, Horowitz–Metzger methods, and master plots. The analysis of the master plots and methods based on single heating rate showed that the mechanisms of dehydration and decomposition stage of oligo(4‐hydroxyquinoline) were best described by kinetic equations of A_n mechanism (nucleation and growth, n = 1) and D_n mechanism (dimensional diffusion, n = 6), respectively. POLYM. ENG. SCI., 54:992–1002, 2014. © 2013 Society of Plastics Engineers     

The Synthesis and Energetic Properties of 5,7‐Dinitrobenzo‐1,2,3,4‐tetrazine‐1,3‐dioxide (DNBTDO)

Energetic tetrazine‐1,3‐dioxide, 5,7‐dinitrobenzo‐1,2,3,4‐tetrazine‐1,3‐dioxide ( DNBTDO ), was synthesized in 45 % yield. DNBTDO was characterized as an energetic material in terms of performance (V_det 8411 m s⁻¹; p_{C J} 3.3×10¹⁰ Pa at a density of 1.868 g cm⁻³), mechanical sensitivity (impact and friction as a function of grain size), and thermal stability (T_dec 204 °C). DNBTDO exhibits a sensitivity slightly higher than that of RDX , and a performance slightly lower (96 % of RDX ).     

Thermal Behavior and Thermolysis Kinetics of the Explosive Trans‐1,4,5,8‐Tetranitro‐1,4,5,8‐Tetraazadecalin (TNAD)

Trans‐1,4,5,8‐Tetranitro‐1,4,5,8‐Tetraazadecalin (TNAD), a cyclic nitroamine, has been studied with regard to the kinetics and mechanism of thermal decomposition, using thermogravimetry (TG), IR spectroscopy, and pressure differential scanning calorimetry (PDSC). The IR spectra of TNAD have also been recorded, and the kinetics of thermolysis has been followed by non‐isothermal TG. The activation energy of the solid‐state process was determined by using the Flynn‐Wall‐Ozawa method. Compared with the activation energy obtained from the Ozawa method, the reaction mechanism of the exothermic process of TNAD was classified by the Coats‐Redfern method as a nucleation and nuclear growth (Avrami equation 1) chemical reaction (α=0.30–0.60) and a 2D diffusion (Valensi equation) chemical reaction (α=0.60–0.90). E_a and ln A were established to be 330.14 kJ mol⁻¹ and 29.93 (α=0.30–0.60) or 250.30 kJ mol⁻¹ and 21.62 (α=0.60–0.90).     

Curing and pyrolysis of cresol novolac epoxy resins containing [2‐(6‐oxido‐6H‐dibenz(c,e)(1,2)oxaphosphorin‐6‐yl)‐1,4‐naphthalenediol]

This study investigates the curing kinetics, thermal properties and decomposition kinetics of cresol novolac epoxy (CNE) with two curing agents, 2‐(6‐oxido‐6H dibenz(c,e)(1,2) oxaphosphorin‐6‐yl)‐1,4‐benzenediol (ODOPN), and phenol novolac (PN). In comparison with the conventional PN system, introducing ODOPN, a phosphorus‐containing bulky pendant group, into CNE increases T_g by 33°C, char yield from 30% to 38%, and LOI from 22 to 31. The DSC curing study reveals that the E_a of the CNE/ODOPN epoxy can be obtained by Kissinger's method. The resulting E_a values indicate that the catalytic effect of EMI is insignificant on CNE/ODOPN but is marked on CNE/PN, whose E_a was reduced from 131.5 to 75.6 KJ/mole. This result may be caused by the fact that the symmetric diol attached to the 1 and 4 positions of the naphthalene ring in ODOPN sets up a steadily resonating structure and inhibits the catalytic action. Further investigating the conversion ratio with curing temperature yielded experimental data that agreed closely with Kaiser's model. The orders of the autocatalyzed reaction, m, and the crosslinking reaction, n, are close to 0.5 and 1.0, respectively, independently of the scan rate. Finally, the TGA decomposition study by Ozawa's method demonstrates that the mean E_a declines with the phosphorus content, because the easy decomposition of the phosphorus compound in the initiation stage facilitates the formation of an insulating layer. However, results in this study further reveal an increasing tendency for E_a with decomposition conversion for an ODOPN/PN mixture with the ODOPN content of over 50%, probably because of the retardation of gas diffusion by the insulating layer of phosphorus compound.     

Synthesis,Crystal Structure,and Thermal Behavior of 3‐(4‐Aminofurazan‐3‐yl)‐4‐(4‐nitrofurazan‐3‐yl)furazan (ANTF)

The energetic material 3‐(4‐aminofurazan‐3‐yl)‐4‐(4‐nitrofurazan‐3‐yl)furazan (ANTF) with low melting‐point was synthesized by means of an improved oxidation reaction from 3,4‐bis(4′‐aminofurazano‐3′‐yl)furazan. The structure of ANTF was confirmed by ¹³C NMR spectroscopy, mass spectrometry, and the crystal structure was determined by X‐ray diffraction. ANTF crystallized in monoclinic system P2₁/c, with a crystal density of 1.785 g cm⁻³ and crystal parameters a=6.6226(9) Å, b=26.294(2) Å, c=6.5394(8) Å, β=119.545(17)°, V=0.9907(2) nm³, Z=4, μ=0.157 mm⁻¹, F(000)=536. The thermal stability and non‐isothermal kinetics of ANTF were studied by differential scanning calorimetry (DSC) with heating rates of 2.5, 5, 10, and 20 K min⁻¹. The apparent activation energy (E_a) of ANTF calculated by Kissinger's equation and Ozawa's equation were 115.9 kJ mol⁻¹ and 112.6 kJ mol⁻¹, respectively, with the pre‐exponential factor lnA=21.7 s⁻¹. ANTF is a potential candidate for the melt‐cast explosive with good thermal stability and detonation performance.     

Synthesis and characterization of alternate copolymers constructed by 1,3‐bis(diphenylsilyl)‐2,2,4,4‐tetraphenylcyclodisilazane units with oligo‐dimethylsiloxane segments

1,3‐Dichloro‐1,1,3,3‐tetraphenyldisilazane (DCTPS) with 71.6% yield was synthesized by the reaction of hexaphenylcyclotrisilazane (HPCT) with Ph₂SiCl₂ catalyzed by dibutyltin dilaurate. A ring‐closure reaction of DCTPS was carried out with BuLi in xylene–hexane mixture solvent; 1,3‐bis(chlorodiphenylsilyl)‐2,2,4,4‐tetraphenyl‐cyclodisilazane (BcPTPC) with 73.2% yield was obtained. Hydrolysis of BcPTPC in ether–triethylamine solvent resulted in 71.9% yield of 1,3‐bis(diphenylhydroxysilyl)‐2,2,4,4‐tetraphenylcyclodisilazane (B_HPTPC). By condensation polymerization of B_HPTPC with α,ω‐bis(diethylamino)‐oligo‐dimethylsiloxane, a kind of alternate copolymer constructed by 1,3‐bis(diphenylsilyl)‐2,2,4,4‐tetraphenylcyclodisilazane units with oligo‐dimethylsiloxane segments [P(BPTPC‐alt‐ODMS)] was synthesized. BcPTPC, B_HPTPC as well as P(BPTPC‐alt‐ODMS) were characterized by ²⁹Si‐NMR spectra, FT‐IR spectra, and elemental analysis. DGA study shows that P(BPTPC‐alt‐ODMS)s are thermally stable. The thermal decomposition onsets of P(BPTPC‐alt‐ODMS)s are all above 520°C. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1484–1490, 2005     

Synthesis of Nano‐γ‐Ferric Oxide by Thermolysis of the 2‐Mercapto‐5‐Methylpyridine‐N‐Oxide‐Iron(III) Complex via Factorial Design

2‐Mercapto‐5‐methylpyridine‐N‐oxide (MMPNO) and its sodium salt (NaMMPNO) were synthesized. The reaction of the latter with Fe³⁺ generates Fe(MMPNO)₃ chelate. The thermolysis of this chelate at 350 °C yielded highly pure reddish‐brown γ‐Fe₂O₃ nanocrystallites with an average particle size of 6.2 nm, a particle size range of 4.2 to 14.8 nm, and a specific surface area of 51.5 m²g^–1. The thermolysis process was optimized using the 2² fractional design. Quantitative tests and characterization of products were carried out by UV‐vis spectroscopy, XRD, LLS, SEM, TGA, BET, TEM, FT‐IR, elemental microanalysis, and classical analytical measurements.     

Amphiphilic diblock copolymers poly(2‐hydroxyethylmethacrylate)‐b‐(N‐phenylmaleimide) and poly(2‐hydroxyethylmethacrylate)‐b‐(styrene) using the macroinitiator poly(HEMA)‐Cl by ATRP: Preparation,characterization, and thermal properties

In recent years, much attention has been given to the development of specialty polymers from useful materials. In this context, amphiphilic block copolymers were prepared by atom transfer radical polymerization (ATRP) of N‐phenylmaleimide (N‐PhMI) or styrene using a poly(2‐hydroxyethylmethacrylate)‐Cl macroinitiator/CuBr/bipyridine initiating system. The macroinitiator P(HEMA)‐Cl was directly prepared in toluene by reverse ATRP using BPO/FeCl₃ 6 H₂O/PPh₃ as initiating system. The microstructure of the block copolymers were characterized using FTIR, ¹H‐NMR, ¹³C‐NMR spectroscopic techniques and scanning electron microscopy (SEM). The thermal behavior was studied by differential scanning calorimetry (DSC), and thermogravimetry (TG). The theoretical number average molecular weight (M_n,th) was calculated from the feed capacity. The microphotographs of the film's surfaces show that the film's top surfaces were generally smooth. The TDT of the block copolymer P(HEMA)₈₀‐b‐P(N‐PhMI)₂₀ and P(HEMA)₉₀‐b‐P(St)₁₀ of about 290°C was also lower than that found for the macroi′nitiator poly(HEMA)‐Cl. The block copolymers exhibited only one T_g before thermal decomposition, which could be attributed to the low molar content of the N‐PhMI or St blocks respectively. This result also indicates that the phase behavior of the copolymers is predominately determined by the HEMA block. The curves reveal that the polymers show phase transition behavior of amorphous polymers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of biodegradable poly(ester‐urethanes) based on bacterial poly(R‐3‐hydroxybutyrate)

A series of poly(R‐3‐hydroxybutyrate)/poly(ε‐caprolactone)/1,6‐hexamethylene diisocyanate‐segmented poly(ester‐urethanes), having different compositions and different block lengths, were synthesized by one‐step solution polymerization. The molecular weight of poly(R‐3‐hydroxybutyrate)‐diol, PHB‐diol, hard segments was in the range of 2100–4400 and poly(ε‐caprolactone)‐diol, PCL‐diol, soft segments in the range of 1080–5800. The materials obtained were investigated by using differential scanning calorimetry, wide angle X‐ray diffraction and mechanical measurements. All poly(ester‐urethanes) investigated were semicrystalline with T_m varying within 126–148°C. DSC results showed that T_g are shifted to higher temperature with increasing content of PHB hard segments and decreasing molecular weight of PCL soft segments. This indicates partial compatibility of the two phases. In poly(ester‐urethanes) made from PCL soft segments of molecular weight (M_n ≥ 2200), a PCL crystalline phase, in addition to the PHB crystalline phase, was observed. As for the mechanical tensile properties of poly(ester‐urethane) cast films, it was found that the ultimate strength and the elongation at the breakpoint decrease with increasing PHB hard segment content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 703–718, 2002