Mechanical,chemical, thermal,and rheological properties of recycled PA6/ABS binary and PA6/PA66/ABS ternary blends

The effects of multiple injection molding cycles on the chemical and mechanical properties of PA6/ABS and PA6/PA66/ABS blends are investigated. The chemical structures of both PA6/ABS binary and PA6/PA66/ABS ternary blends do not alter after recycling process. For PA6/ABS binary blend, it is found that the tensile strength, strain at break, elastic modulus, impact strength, flexural strength, and modulus of recycled blend decrease by 6.49%, 15.19%, 21.00%, 9.41%, 7.09%, and 8.25%, respectively, while MFI increases by 23.59% as compared with the virgin blend. After five recycling process for PA6/PA66/ABS ternary blend, the tensile strength, strain at break, and impact strength of recycled blend decrease by 18.00%, 50.80%, and 87.27%, respectively. However, flexural strength and modulus of PA6/PA66/ABS blend increase slightly. For virgin PA6/PA66/ABS blend, MFI value was 7.7 g/10 min and with recycling this value showed an important increase to 31.56 g/10 min after five cycles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40810.     

Mechanical,thermal, and morphological properties of graphene reinforced polycarbonate/acrylonitrile butadiene styrene nanocomposites

Nanocomposites of polycarbonate/acrylonitrile butadiene styrene (PC/ABS) with (70/30) composition containing different amounts of graphene nanoplates (GNPs) (1, 3, and 5 wt%) were prepared by melt‐blending in a twin‐screw extruder. The structural, morphological, mechanical, and thermal properties of the nanocomposites were investigated. The Young's modulus and flexural modulus of the nanocomposites were increased by 30 and 54%, respectively, when 3 wt% GNPs was added. The flexural strength and tensile strength of the PC/ABS/GNPs nanocomposites increased up to a loading of 3 wt% GNPs. The incorporation of GNPs enhanced the thermal stability and char yield of the nanocomposites. X‐ray diffraction and field emission scanning electron microscopy showed uniform dispersion and alignment of GNPs in PC/ABS matrix. The interaction between the GNPs and the PC/ABS matrix were confirmed by Fourier transform infrared spectra. Therefore, the PC/ABS/GNP nanocomposites with improved flexural and tensile properties, without loss of extensibility and good thermal properties may have promising applications in automotive, electric tools, household, communication, and safety appliances. POLYM. COMPOS., 37:1633–1640, 2016. © 2014 Society of Plastics Engineers     

Toughening modification of PBT/PC blends with PTW and POE

New toughened poly(butylene terephthalate) (PBT)/bisphenol A polycarbonate (PC) blends were obtained by melt blending with ethylene–butylacrylate–glycidyl methacrylate copolymer (PTW) and ethylene‐1‐octylene copolymer (POE) in a twin‐screw extruder. The mechanical properties of PBT/PC blends were investigated. The presence of PTW or POE could improve the mechanical properties except for the tensile strength and flexural properties of the PBT/PC blends. However, a combination use of PTW and POE had a strong synergistic effect, leading to remarkable increases in the impact strength, elongation at break, and Vicat temperature and some reduction of the tensile strength and flexural properties. The relationship between mechanical properties and morphology of the PBT/PC/PTW/POE blends was studied. The morphology was observed by scanning electron microscopy and the average diameter of dispersed phase was determined by image analysis, and the critical interparticle distance for PBT/PC was determined. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 54–62, 2006     

Studies on morphology and thermomechanical performance of ABS/PC/organoclay hybrids

In the present research, poly(acrylonitrile‐butadiene‐styrene)/polycarbonate (ABS/PC) blends were prepared in a twin screw extruder. An attempt to reinforce and promote compatibility of the above systems was made by the incorporation of organically modified montmorillonite (OMMT, Cloisite 30B), as well as by the addition of compatibilizer (ABS grafted with maleic anhydride, ABS‐g‐MAH), and the effect of those treatments on the morphology, thermal transitions, rheological, and mechanical properties of the above blends was evaluated. The addition of compatibilizer in ABS/PC blends does not significantly affect the glass transition temperature (T_g) of SAN and PC phases, whereas the incorporation of Cloisite 30B decreases slightly the T_g values of SAN and, more significantly, that of PC in compatibilized and uncompatibilized blends. The T_g of PB phase remains almost unaffected in all the examined systems. The obtained results suggest partial dissolution of the polymeric components of the blend and, therefore, a modified Fox equation was used to assess the amount of PC dissolved in the SAN phase of ABS and vice versa.Reinforcing with OMMT enhances the miscibility of ABS and PC phases in ABS/PC blends and gives the best performance in terms of tensile strength, modulus of elasticity, and storage modulus, especially in 50/50 (w/w) ABS/PC blends. The addition of ABS‐g‐MAH compatibilizer, despite the improvement of intercalation process in organoclay/ABS/PC nanocomposites, did not seem to have any substantial effect on the mechanical properties of the examined blends. POLYM. COMPOS., 35:1395–1407, 2014. © 2013 Society of Plastics Engineers     

In‐situ reinforcement of PBT/ABS blends with liquid crystalline polymer

Ternary in‐situ poly(butylene terephthalate) (PBT)/poly(acrylonitrile‐butadienestyrene) (ABS)/liquid crystalline polymer(LCP) blends were prepared by injection molding. The LCP used was a versatile Vectra A950, and the matrix material was PBT/ABS 60/40 by weight. Maleic anhydride (MA) copolymer and solid epoxy resin (bisphenol type‐A) were used as compatibilizers for these blends. The tensile, dynamic mechanical, impact, morphology and thermal properties of the blends were studied. Tensile tests showed that the tensile stregth of PBT/ABS/LCP blend in the longitudinal direction increased markedly with increasing LCP content. However, it decreased sharply with increasing LCP content up to 5 wt%; thereafter it decreased slowly with increasing LCP content in the transverse direction. The modulus of this blend in the longitudinal direction appeared to increase considerably with increasing LCP content, whereas the incorporation of LCP into PBT/ABS blends had little effect on the modulus in the transverse direction. The impact tests revealed that the Izod impact strength of the blends in longitudinal direction decreased with increasing LCP content up to 10 wt%; thereafter it increased slowly with increasing LCP. Dynamic mechanical analyses (DMA) and thermogravimetric measurements showed that the heat resistance and heat stability of the blends tended to increase with increasing LCP content. SEM observation, DMA, and tensile measurement indicated that the additions of epoxy and MA copolymer to PBT/ABS matrix appeared to enhance the compatibility between PBT/ABS and LCP.     

Effect of ABS grafting degree and compatibilization on the properties of PBT/ABS blends

Blends of PBT/ABS and PBT/ABS compatibilized with styrene‐acrylonitrile‐glycidyl methacrylate (SAG) copolymer were prepared by melt blending method. Grafting degree (GD) of ABS influences the morphology and mechanical properties of PBT/ABS blends. ABS can disperse in PBT matrix uniformly and PBT/ABS blends fracture in ductile mode when ABS grafting degree is more than 44.8%, otherwise, agglomeration takes place and PBT/ABS blends fracture in brittle way. On the other hand, the grafting degree of ABS has no obvious influence on the morphology of PBT/ABS blends and PBT/ABS blends fracture in ductile mode when SAG is incorporated since the compatibilization effect. However, PBT/SAG/ABS blends display much lower impact strength values comparing with PBT/ABS when the blends fracture in ductile way. Side reactions in PBT/SAG/ABS blends were analyzed and which were the main reason for the decrease of impact strength of PBT blends. Tensile tests show that the tensile strength and tensile modulus of PBT blends decrease with the increase of ABS grafting degree due to the higher effective volume. PBT/SAG/ABS blends display much higher tensile properties than PBT/ABS blends since the compatibilization effect. POLYM. COMPOS., 28:484–492, 2007. © 2007 Society of Plastics Engineers     

Influences of ethylene–butylacrylate–glycidyl methacrylate on morphology and mechanical properties of poly(butylene terephthalate)/polyolefin elastomer blends

Elastomer ethylene–butylacrylate–glycidyl methacrylate (PTW) containing epoxy groups were chosen as toughening modifier for poly(butylene terephthalate) (PBT)/polyolefin elastomer (POE) blend. The morphology, thermal, and mechanical properties of the PBT/POE/PTW blend were studied. The infrared spectra of the blends proved that small parts of epoxy groups of PTW reacted with carboxylic acid or hydroxyl groups in PBT during melt blending, resulting in a grafted structure which tended to increase the viscosity and interfere with the crystallization process of the blend. The morphology observed by scanning electron microscopy revealed the dispersed POE particles were well distributed and the interaction between POE and PBT increased in the PBT/POE/PTW blends. Mechanical properties showed the addition of PTW could lead to a remarkable increase about 10‐times in impact strength with a small reduction in tensile strength of PBT/POE blends. Differential scanning calorimetry results showed with increasing PTW, the crystallization temperature (T_c) and crystallinity (X_c) decreased while the melting point (T_m) slightly increased. Dynamic mechanical thermal analysis spectra indicated that the presence of PTW could improve the compatibility of PBT/POE blends. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40660.     

Injection molding of PC/PBT/LCP ternary in situ composite

A liquid crystalline polymer (LCP), Vectra B950, reinforced polycarbonate (PC) 60 wt%/polybutylene terephthalate (PBT) 40 wt% blend was studied using the injection molding process. Morphology and mechanical properties of ternary in situ LCP composites were investigated and compared with binary polycarbonate/Vectra B950 LCP composites. Good in situ fibrillation of LCP was observed in the direct injection-molded LCP composites. Preliminary results of this work indicate that addition of PBT improves skin-core distribution of LCP microfibrils in the matrix and also enhances adhesion between the matrix and Vectra B950, which contains terephthalic acid. The PC/PBT/LCP ternary system also exhibits lower viscosity than the PC/PBT blend and pure LCP. In a ternary system with 30 wt% of Vectra B950, tensile modulus and strength increase approximately threefold and twofold, respectively. The rule of mixtures (ROM) for continuous reinforcement can accurately represent the strengthening effects for the ternary LCP in situ composites. Generally, LCP reduces the ductility and impact strength of the thermoplastic blends; however, the relative loss is less in the ternary system than in the binary system.     

Effect of Rubber Content of ABS on Properties of PC/ABS Blends. I. Rheological,Mechanical, and Thermal Properties

ABSTRACT

The effect of rubber content of poly (acrylonitrile butadiene styrene) (ABS) on compatibility and properties of polycarbonate (PC)/ABS blend systems has been investigated. The rheological, mechanical, physical, and thermal properties of PC/ABS blend systems containing ABS of different rubber content were studied. The reduced torque data on Torque Rheocord indicated improved processability of PC by addition of ABS, however, in ABS-rich compositions, higher rubber content reduces the extent of improvement. The tensile strength of PC decreased with addition of ABS to it but PC-rich compositions have a nearly additive response. The deviation form additivity for blends having higher rubber ABS was more pronounced. However, the impact strength of blends having higher rubber ABS were higher than other types and showed a positive deviation from additivity with variation in compositions. The blends containing ABS with lower rubber content showed a single glass-transition temperature (Tg) in differential scanning calorimetry studies (DSC) in the whole composition range indicating miscibility. Although two Tgs, one associated with PC phase and one with ABS phase, were observed for blends containing high rubber ABS, the shift in Tgs with respect to pure component values indicates partial miscibility. The decrease in the extent of shift with increase of ABS in these blends indicates undesirable phase separation due to poor adhesion of higher level of rubber content.     

Synthesis of functionalized copolymers and their compatibilization effects on acrylonitrile butadiene styrene/poly(butylene terephthalate) blends

In this study, the copolymers of methyl methacrylate-co-glycidyl methacrylate (MGD) with different epoxy contents and molecular weights, the styrene-co-glycidyl methacrylate (SGD) and methyl methacrylate-co-maleic anhydride (MAD) were synthesized. The synthesized copolymers, styrene-co-maleic anhydride (SMA) and styrene-acrylonitrile-co-glycidyl methacrylate (SAG) were used as compatibilizers to enhance the impact strength of the acrylonitrile butadiene styrene/poly(butylene terephthalate) (ABS/PBT). The effects of differences in the structure, reactive group type, and molecular weight of the compatibilizers on the mechanical properties, phase morphology, melt viscosity, thermal stability, and melting temperature of the blend were studied. The results showed that functionalized copolymers were successfully synthesized with high monomer conversions. Addition of the functionalized copolymers increased melt viscosity but did not considerably affect thermal stability, tensile strength, flexural strength and melting temperature of the ABS/PBT blends. The compatibilizers improved the dispersion of the PBT phase and prevented brittle fracture, thereby increasing the impact strength of the blend. Among the studied compositions, the ABS/PBT/MGD-5 blend exhibited the highest impact strength of 25.8 kJ/m² and an appropriate melt flow index of 19.1 g/10 minutes. The compatibilizer should have an appropriate molecular weight to improve the interface bonding force. Regarding the melting viscosity, the reactive group content and compatibilizer dosage should be adjusted to ensure high impact strength.     

Effect of processing parameters on the mechanical properties of in situ compatibilized polybutylene terephthalate/acrylonitrile–butadiene–styrene blends

To evaluate mechanical properties of blends prepared by intermeshing corotating twin‐screw extrusion (ICTSE), it is usually necessary to injection mold specimens after the extrusion mixing process. At this study an alternative method is used to obtain testing specimens from ribbons extruded polybutylene terephthalate/acrylonitrile–butadiene–styrene blends, (PBT/ABS), compatibilized with methyl methacrylate–glycidyl methacrylate‐ethyl acrylate (MGE) by ICTSE, and then to correlate their mechanical properties with the processing parameters. Regarding to the extrusion process parameters, it has been noted that higher feed rates, lower screw speeds and narrower kneading blocks have reduced the ductile‐brittle transition temperature (DBTT) of the compatibilized PBT/ABS blends, thereby suggesting that the molecule integrity of blend polymeric components has been preserved and that a good dispersion of the ABS domains in the PBT matrix has been achieved. Injection molded PBT/ABS blends were obtained to compare to the extruded ribbons. The mechanical tests for both specimens have shown the same trends. The injection molded samples have presented poorer impact strength, tensile strain at break and tensile strength, when compared to the respective extruded samples. That behavior has been attributed to the high level of molecular orientation resulting from the injection molding process and mainly to PBT degradation during process. The PBT degradation could have increased its degree of crystallinity, which has been confirmed by DSC measurements. As result, the blend became more brittle, decreasing its Izod impact strength. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Compatibility enhancement of ABS/polycarbonate blends

The effects of blend composition, melt viscosity of poly(acrylonitrile-butadiene-styrene) (ABS), and compatibilizing effect of poly(methyl methacrylate) (PMMA) on mechanical properties of ABS/polycarbonate (PC) blends at ABS-rich compositions were studied. As the content of PC was increased, impact strength and Vicat softening temperature (VST) were increased. As the melt viscosity of ABS was increased near to that of PC, finer distribution of dispersed PC phase and consequent enhanced impact strength and VST were observed. The compatibilizing effect of PMMA can be ascer-tained from the enhanced properties of ¼-inch notch impact strength, VST, tensilestrength, and the morphology observed by a scanning electron microscope. The improved adhesion of the ABS/PC interface by PMMA changed the fracture mechanism and reduced the notch sensitivity of blends. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 533–542, 1998     

Boiling water aging of polycarbonate and polycarbonate/acrylonitrile–butadiene–styrene resin and polycarbonate/low‐density polyester blends

The effects of boiling water on the mechanical and thermal properties and morphologies of polycarbonate (PC), PC/acrylonitrile–butadiene–styrene resin (PC/ABS), and PC/low‐density polyester (PC/LDPE) blends (compositions of PC/ABS and PC/LDPE blends were 80/20) were studied. PC and the PC/ABS blend had a transition from ductile to brittle materials after boiling water aging. The PC/LDPE blend was more resistant to boiling water aging than PC and the PC/ABS blend. The thermal properties of glass‐transition temperature (T_g) and melting temperature (T_m) in PC and the blends were measured by DSC. The T_g of PC and PC in the PC/ABS and PC/LDPE blends decreased after aging. The T_g of the ABS component in the PC/ABS blend did not change after aging. The supersaturated water in PC clustered around impurities or air bubbles leading to the formation of microcracks, which was the primary reason for the ductile–brittle transition in PC, and the microcracks could not recover after PC was treated at 160°C for 6 h. The PC/ABS blend showed slightly higher resistance to boiling water than did PC. The highest resistance to boiling water of the PC/LDPE blend may be attributed to its special structural morphology. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 589–595, 2003     

Mechanical and thermal behavior of poly(acrylonitrile-butadiene-styrene)/polycarbonate blends reinforced with potassium titanate whiskers

Poly(acrylonitrile-butadiene-styrene) (ABS)/polycarbonate (PC) blends reinforced with potassium titanate (K₂Ti₆O₁₃) whiskers were prepared in a twin screw extruder followed by injection molding. The whiskers were pretreated with tetrabutyl orthotitanate prior to compounding. The tensile, dynamic mechanical, impact, morphology and thermal properties of the blends were studied. Tensile tests showed that the modulus of ABS/PC/K₂Ti₆O₁₃ blend increased markedly with increasing whisker content. However, the variation of the modulus of ABS/PC/K₂Ti₆O₁₃ blend with PC content followed a sigmoidal relation. In addition, the tensile strength of the blends containing 20 wt% PC tended to increase markedly with increasing whisker content. But the impact strength of the blends containing 20 wt% PC decreased rapidly with increasing whisker content. Dynamic mechanical analyses (DMA) results indicated that the storage modulus of the blends increased markedly with increasing K₂Ti₆O₁₃ whisker content. Differential thermal analysis and thermogravimetric measurements showed that potassium titanate whiskers tend to induce chemical decomposition of PC during blending of the PC/whisker blends. However, the incorporation of ABS into PC was beneficial to reduce the PC decomposition during compounding with the whiskers.     

液晶离聚物在ABS/PBT共混体系中的增容研究

合成了一种含有磺酸基的液晶离聚物（LCI）,并研究了LCI作为相容剂对丙烯腈-丁二烯-苯乙烯三元共聚物/聚对苯二甲酸丁二醇酯（ABS/PBT）共混体系力学性能的影响。采用扫描电镜（SEM）、差示扫描量热仪（DSC）和热失重（TGA）分析对ABS/PBT/LCI共混物的热性能、微观形态和相容性进行了研究。研究结果表明LCI的加入,改善了二者的相容性,从而提高了共混物的拉伸强度、断裂伸长率以及缺口冲击强度。     

ABS/HIPS blends obtained from WEEE: Influence of processing conditions and composition

The recycling of acrylonitrile–butadiene–styrene (ABS) and high‐impact polystyrene (HIPS) from postconsumer electronic equipment housing was investigated. A preliminary study of shot size and particle size effects on the mechanical properties of ABS/HIPS (50/50) blends obtained directly via injection molding was conducted. Injection‐molded specimens of ABS/HIPS blends, obtained at different compositions with or without previous extrusion, were subjected to mechanical, thermal, and morphological testing. Preliminary studies showed that a smaller particle size resulted in higher tensile and impact strength, regardless of the shot size used during injection molding. ABS/HIPS blends obtained using previous extrusion presented a slight increase in Young's modulus and a decrease in elongation at break and impact strength. The increase in glass‐transition temperature related to the Polybutadiene (PB) phases of these blends indicated a possible increase in crosslinking structures during extrusion. In addition, these blends showed a coarse and heterogeneous morphology, suggesting that ABS did not completely mix with HIPS. Compared to processing conditions, the blend composition appeared to have a much stronger effect on the mechanical properties. The results obtained suggest the possibility of obtaining ABS/HIPS blends directly via injection molding as long as small ground particles are used. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43831.     

PC及PC/ABS合金的增韧研究

研究了增韧剂SWR-7A对PC及PC／ABS增韧效果。比较了增韧剂SWR-7A与美国增韧剂GE-338及国内外其它增韧剂的增韧效果。研究表明，加入SWR-7A在提高PC及PC／ABS共混体系的冲击强度的同时，拉伸强度、弯曲强度及弯曲模量降低较少，达到了优化材料性能的目的，SWR-7A是一种理想的增韧剂。     

ACR增韧PBT/PC合金的研究

研究了“核-壳”结构的ACR对PBT/PC(质量比80/20)合金的力学性能和耐热性的影响。结果表明:随着ACR用量增加,共混物的缺口冲击强度不断增大,而拉伸强度、弯曲强度、维卡耐热度降低。当ACR的加入量为5份时,缺口冲击强度提高1倍,当ACR的加入量为30份时,缺口冲击强度约为纯PBT/PC合金的5倍。从增韧效果来看,FM50略好于KM355。     

Improvement of Mechanical Properties of Poly(butylene terephthalate)/Polyarylate Blends with Various Compositions via Zone Drawing-Zone Annealing

Abstract

Poly(butylene terephthalate)/polyarylate (PBT/PAr) blends of various compositions were subjected to a series of thermal and mechanical treatments. The evolution of the structure together with the static mechanical properties of produced fibers were investigated. It was found that zone drawing-zone annealing at 140 and 190[ddot] C markedly improves the blend mechanical properties: the Young modulus increases up to 5 times, the tensile strength-up to 10 times (compared to neat PBT) and up to 5 times (compared to neat PAr), the elongation at break drops 50–100 times with the rise of PAr content. The highest values of modulus and strength are obtained for blends containing between 10 and 35% (by wt) PAr. The observed improvement is explained by the substantial chain axis orientation and enhanced crystallization. of PBT offered by the zone drawing-zone annealing process, as proven by wide angle X-ray diffraction and birefrigent tests. Finally, a conclusion is drawn that after the appropriate treatments the PBT/PAr blends represent microfibrillar reinforced composites, similarly to other polymer blends for which the same improvements in the mechanical properties are known to be due to the microfibrillar reinforcing effect. The PBT microfibrils are visualized by observations using scanning electron microscope.     

Morphology and properties of PBT/nylon 6/EVA‐g‐MAH ternary blends prepared by reactive extrusion

Morphology and properties of poly(butylene terephthalate) (PBT)/nylon 6 (PA6)/EVA‐g‐MAH ternary blends were investigated. The blends were prepared in a corotating, intermeshing, twin‐screw extruder. The incorporation of maleic anhyride (MAH) grafted onto ethylene‐vinyl acetate copolymer (EVA) (EVA‐g‐MAH) in the PBT/PA6 binary blends decreased the tensile and flexural strength but increased the impact strength, while the mechanical properties of the PBT/PA6 blends were decreased with increasing PA6 content regardless of the presence or absence of the EVA‐g‐MAH. The morphology studies of the ternary blends showed gross phase separation. The rheological properties of the ternary blends suggested that excessively high reactivity between amine end groups of PA6 and MAH grafted onto EVA makes the compatibility between PBT and PA6 worse, although EVA‐g‐MAH was expected to work as a compatibilizer for PBT/PA6 blends. The degree of reactivity between functional groups in PBT, PA6, and EVA‐g‐MAH was also examined by investigating the effect of blending sequence on the properties of the ternary blends.