Characterization of 4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine

4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine (DANT) was prepared with a 35 % yield from cyanuric chloride in a three step process. DANT was characterized by IR and NMR spectroscopy (¹H, ¹³C, ¹⁵N), single‐crystal X‐ray diffraction, and DTA. The crystal density of DANT is 1.849 g cm⁻³. The cyclization of one azido group and one nitrogen atom of the triazine group giving tetrazole was observed for DANT in a dimethyl sulfoxide solution using NMR spectroscopy. An equilibrium exists between the original DANT molecule and its cyclic form at a ratio of 7 : 3. The sensitivity of DANT to impact is between that for PETN and RDX, sensitivity to friction is between that for lead azide and PETN, and sensitivity to electric discharge is about the same as for PETN. DANT′s heat of combustion is 2060 kJ mol⁻¹.     

Preparation of 1,3‐Diazido‐2‐Nitro‐2‐Azapropane from Urea

An alternative method to prepare 1,3‐diazido‐2‐nitro‐2‐azapropane (DANP), a promising liquid component for high‐energy condensed systems, is suggested and involves the following stages: (i) nitration of urea, (ii) condensation of the nitration product with formaldehyde, (iii) acylation (chlorination) of 1,3‐dihydroxy‐2‐nitro‐2‐azapropane, (iv) chlorination of 1,3‐diacetoxy‐2‐nitro‐2‐azapropane, and (v) azidation of the dichloro derivative to DANP. This synthesis method is selective and enables isolation of 1,3‐diazido‐2‐nitrazapropane devoid of impurities.     

Accelerating effect of NaNO2 on the polymer plating of 6‐substituted‐1,3,5‐triazine‐2,4‐dithiol mono sodium salts

Organic polymer plating properties of 6‐substituted‐1,3,5‐triazine‐2,4‐dithiol mono sodium salts were investigated in the presence of various supporting electrolytes. Among these, the NaNO₂ supporting electrolyte greatly accelerated the film formation rate in polymer plating. The accelerating effect of NaNO₂ was further confirmed by comparing plating potentials in the presence of NaNO₂ and Na₂CO₃. The potentiostatic polymer plating of DAN in the presence of the NaNO₂ supporting electrolyte took place in the potential range of 1.65–1.8 V (compared against saturated calomel electrode reference). Film formation was influenced by such factors as the pH of solution and both the chemical structure and the concentration of triazine dithiol. In polymer platings, NO anions are thought to be electrochemically oxidized to yield NO radicals and these radicals react with DAN to yield new thiyl radicals. The thiyl radicals in the DAN molecules couple with each other by means of disulfide bonds, resulting in the growth of polymer film. Organic polymer plating films are shown to contain disulfide bonds, monosulfide bonds obtained by the reaction between allyl groups and thiyl radicals, and network chains. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2300–2309, 2001     

First Synthesis of Benzotrifuroxan at Low Temperature: Unexpected Behavior of 5,7‐Dichloro‐4,6‐dinitrobenzo‐furoxan with Sodium Azide

Attempts to prepare 5‐chloro‐6‐nitrobenzodifuroxan from the reaction of 5,7‐dichloro‐4,6‐dinitrobenzofuroxan with sodium azide have failed and, surprisingly, the formation of the powerful hydrogen‐free explosive – benzotrifuroxan (BTF) through spontaneous cyclization at 0 °C was observed (yield: 75 %). Importantly, BTF was synthesized avoiding the isolation and the heating of the hazardous intermediate trinitro‐triazidobenzene. The structure of BTF was confirmed by IR spectroscopy, elemental analysis, and melting point measurement.     

Computed Thermodynamic and Explosive Properties of 1‐Azido‐2‐nitro‐2‐azapropane (ANAP)

Some thermodynamic and explosive properties of the recently reported 1‐azido‐2‐nitro‐2‐azapropane (ANAP) have been determined in a combined computational ab initio (MP2/aug‐cc‐pVDZ) and EXPLO5 (Becker–Kistiakowsky–Wilson's equation of state, BKW EOS) study. The enthalpy of formation of ANAP in the liquid phase was calculated to be Δ_fH°, ANAP(l)=+297.1 kJ mol⁻¹. The heat of detonation (Q_v), the detonation pressure (P), and the detonation velocity of ANAP were calculated to be Q_v=−6088 kJ kg⁻¹, P=23.8 GPa, D=8033 m s⁻¹. A mixture of ANAP and tetranitromethane (TNM) was investigated in an attempt to tailor the impact sensitivity of ANAP, but results obtained indicate that the mixture is almost as sensitive as pure ANAP. On the other hand, ANAP and TNM were found to be chemically compatible (¹H, ¹³C, ¹⁴N NMR; DSC) and a 1 : 1 mixture (by weight) of both components was calculated to have superior explosive properties than either of the individual components: Q_v=−6848 kJ kg⁻¹, P=27.0 GPa, D=8284 m s⁻¹.     

Hydronium Copper(II)‐tris(5‐nitrotetrazolate) Trihydrate – A Primary Explosive

The long‐time elusive structure of the acid copper(II) salt intermediate in the production of DBX‐1 is presented. The single‐crystal X‐ray shows infinite chains of copper(II) ions complexed by six 5‐nitrotetrazolate anions are aligned along the sixfold axis. Hydronium ions are located on the threefold axis with additional neutral water molecules.     

External Stimuli‐Responsive Characteristics of Ionic Poly[(N,N‐diethylaminoethyl methacrylate)‐co‐(N‐vinyl‐2‐pyrrolidone)] Hydrogels

Summary: Polyelectrolyte hydrogels containing diprotic acid moieties sensitive to ionic strength changes of the swelling medium were synthesized from N,N‐diethylaminoethyl methacrylate (DEAEMA), N‐vinyl‐2‐pyrrolidone (VP) and itaconic acid (IA) by using ammonium persulfate (APS) as a free radical initiator in the presence of the cross‐linker, methylenebisacrylamide (MBAAm). The swelling behavior of the ionic poly[(N,N‐diethylaminoethyl methacrylate)‐co‐(N‐vinyl‐2‐pyrrolidone)] [P(DEAEMA/VP)] hydrogels were investigated in pure water; in NaCI solutions with pH 4 and 9; and in water‐acetone mixtures depending on the IA content in the hydrogel. The average molecular mass between cross‐links ( ) and polymer‐solvent interaction parameter (χ) of the hydrogels were determined from equilibrium swelling values. The pulsatile swelling behavior was also observed in response to solvent changes between the solution in water and in acetone. The equilibrium swelling ratio of these hydrogels was basically unaffected with change in temperature. The swelling variations were explained according to the swelling theory based on the hydrogel chemical structure.

Pulsatile swelling behavior of ionic P(DEAEMA/VP) hydrogels in response to solvent changes between water and acetone at 25 °C.     

Vapour–liquid equilibrium of CO2 in aqueous solutions of N‐methyl‐2‐ethanolamine

The equilibrium solubility of CO₂ into aqueous solution of sterically hindered N‐methyl‐2‐ethanolamine or methyl amino ethanol (MAE) was investigated in the temperature range of 303.1–323.1 K and total CO₂ pressure in the range of 1–350 kPa. The N‐methyl‐2‐ethanolamine aqueous solutions studied were 0.968, 1.574, 2.240 and 3.125 mol kg^?1 of solvent. © 2011 Canadian Society for Chemical Engineering     

Synthesis and Characterization of the Nitrogen‐Rich Hyperbranched Polymers – Poly([1,2,3]‐Triazole‐[1,3,5]‐Triazine)s

Novel hyperbranched poly([1,2,3]‐triazole‐[1,3,5]‐triazine)s (HBP TT) were synthesized by a 1,3‐dipolar cycloaddition reaction from AB₂ monomer – 2‐azido‐4,6‐bis‐prop‐2‐yn‐1‐yloxy‐ [1,3,5]‐triazine (ABPOT). The monomer contains one azide group A and two terminal alkyne units B. Thermal polymerization of ABPOT in bulk or in DMF solution leads to hyperbranched polymers containing both 1,4‐ and 1,5‐disubstituted [1,2,3]‐triazoles. The monomer was also polymerized catalytically in the presence of Cu(I) salts under mild reaction conditions in DMSO solution and in bulk affording hyperbranched poly‐[1,2,3]‐triazoles 1,4‐disubstituted only. The reactions lead to the products soluble in aprotic polar solvents like DMSO or DMF. Side reactions can proceed in a few cases, particularly: (i) homocoupling of alkyne groups, leading to the formation of insoluble products as a result of cross‐linking, (ii) isomerization of propynyloxytriazine fragments to propynyl‐ or propadienyltriazinone ones, and (iii) hydrolysis of triple bonds without the loss of solubility. Heats of formation of monomer and synthesized polymers were calculated from their combustion heats. All products were characterized by NMR‐, IR‐spectroscopy, and size exclusion chromatography (SEC) data. The obtained results open the prospect for the use of HBP TT as the high‐enthalpy modifiers for energetic and non‐energetic binders.     

An Efficient and Recyclable Catalyst for N‐Alkylation of Amines and β‐Alkylation of Secondary Alcohols with Primary Alcohols: SBA‐15 Supported N‐Heterocyclic Carbene Iridium Complex

A mesoporous silica (SBA‐15)‐supported pyrimidine‐substituted N‐heterocyclic carbene iridium complex was prepared and used as a catalyst for both environmentally friendly N‐alkylation of amines and β‐alkylation of secondary alcohols with primary alcohols. The structure of the supported iridium catalyst was characterized by Fourier transform infrared (FT‐IR), ¹³C and ²⁹Si solid‐state nuclear magnetic resonance (NMR), small‐angle X‐ray scattering (SAXS), transmission electron microscopy (TEM), iridium K‐edge X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine structure (EXAFS) spectroscopic analyses which demonstrated that the coordination environment of the iridium centre and the 3‐dimensional‐hexagonal pore structure of SBA‐15 were retained after the immobilization. The catalyst was found to be highly efficient for both kinds of reaction on a wide range of substrates under mild conditions. Moreover, the supported iridium catalyst was obviously superior to the unsupported one in the N‐alkylation of aniline and β‐alkylation of 1‐phenylethanol with benzyl alcohol as substrate, which indicated that not only the iridium complex moiety but also the support material contributed to the catalytic activity of the supported iridium catalyst in these reactions. The supported iridium catalyst can be easily recycled by simple washing without chemical treatment, and exhibited excellent recycling performance without notable decrease in catalytic efficiency even after twelve test cycles for N‐alkylation of aniline with benzyl alcohol, nine cycles for N‐alkylation of different amines with different alcohols, and eight cycles for β‐alkylation of 1‐phenylethanol with benzyl alcohol, respectively.     

Properties and pervaporation characteristics of chitosan–poly(N‐vinyl‐2‐pyrrolidone) blend membranes for MeOH–MTBE

Clear blends of chitosan with poly(N‐vinyl‐2‐pyrrolidone) (PVP) made from aqueous solutions appear to be miscible from visual appearance. Infrared (IR) spectra used to investigate the carbonyl—hydroxyl hydrogen bonding in the blends indicated compatibility of two polymers on a molecular level. The IR spectra were also used to determine the interaction change accessing with increasing temperature and indicated that a significant conformational change occurred. On the other hand, the blend membranes were evaluated for separation of methanol from methyl tert‐butyl ether. The influences of the membrane and the feed compositions were investigated. Methanol preferentially permeates through all the tested membranes, and the partial flux of methanol significantly increase with the poly(N‐vinyl‐2‐pyrrolidone) content increasing. The temperature dependence of pervaporation performance indicated that a significant conformational change occurred with increasing temperature. Combined with the IR results, the pervaporation properties are in agreement with characteristics of interaction between chain–chain within the blend membranes. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1452–1458, 1999     

Synthesis,Structure–Activity,and Structure–Stability Relationships of 2‐Substituted‐N‐(4‐oxo‐3‐oxetanyl) N‐Acylethanolamine Acid Amidase (NAAA) Inhibitors

N‐Acylethanolamine acid amidase (NAAA) is a cysteine amidase that preferentially hydrolyzes saturated or monounsaturated fatty acid ethanolamides (FAEs), such as palmitoylethanolamide (PEA) and oleoylethanolamide (OEA), which are endogenous agonists of nuclear peroxisome proliferator‐activated receptor‐α (PPAR‐α). Compounds that feature an α‐amino‐β‐lactone ring have been identified as potent and selective NAAA inhibitors and have been shown to exert marked anti‐inflammatory effects that are mediated through FAE‐dependent activation of PPAR‐α. We synthesized and tested a series of racemic, diastereomerically pure β‐substituted α‐amino‐β‐lactones, as either carbamate or amide derivatives, investigating the structure–activity and structure–stability relationships (SAR and SSR) following changes in β‐substituent size, relative stereochemistry at the α‐ and β‐positions, and α‐amino functionality. Substituted carbamate derivatives emerged as more active and stable than amide analogues, with the cis configuration being generally preferred for stability. Increased steric bulk at the β‐position negatively affected NAAA inhibitory potency, while improving both chemical and plasma stability.     

Surface free‐energy analysis of poly(N‐vinyl‐2‐pyrrolidone–crotonic acid) copolymers prepared by γ‐ray‐induced polymerization technique

Composite hydrogels of pectin and polyacrylamide were synthesized and evaluated by scanning electron microscopy, atomic force microscopy, light microscopy, and dynamic mechanical analysis. The crosslinking polymerization of acrylamide in pectin solution resulted in a composite having a macroporous pectin domain with an interstitial polyacrylamide domain. This composite had improved mechanical properties compared to those of either polymer alone, and it absorbed and retained more water than crosslinked polyacrylamide alone. Furthermore, crosslinking polymerization of acrylamide in an existing pectinate scaffold resulted in a double‐network architecture, where filamentous polyacrylamide networks penetrated through pores of the pectin scaffold. It was found that pectins dictated the features of microstructure in the composites through regulating the coordination of phase separation of the two components and water partition between the two phases. Results from this study highlight potential new uses of pectins in protecting the physical structure of environmentally sensitive polymers from mechanical damage related to freezing, lyophilization, and other conditions experienced during their use in biomedical and industrial products. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1893–1901, 2004     

Microstructure analysis of N‐vinyl‐2‐pyrrolidone/vinyl acetate copolymers by NMR spectroscopy

N‐Vinyl‐2‐pyrrolidone (V) and vinyl acetate (A) copolymers of different compositions were synthesized by free radical bulk polymerization. The copolymer composition of these copolymers was determined using quantitative ¹³C{¹H} NMR spectra. The reactivity ratios for these comonomers were determined using the Kelen–Tudos (KT) and non‐linear least‐square error‐in‐variable (EVM) methods. The reactivity ratios calculated from the KT and EVM methods are r_V = 2.86 ± 0.16, r_A = 0.36 ± 0.09 and r_V = 2.56, r_A = 0.33, respectively. ¹H, ¹³C{¹H} and ¹H–¹³C heteronuclear shift correlation spectroscopy (HSQC) and ¹H–¹H homonuclear total correlation spectroscopy (TOCSY) were used for the compositional and configurational assignments of V/A copolymers. The ¹³C distortionless enhancement by polarization transfer (DEPT) technique was used to resolve the methine, methylene and methyl resonance signals in the V/A copolymers. © 2002 Society of Chemical Industry     

Synthesis,Characterization, and Energetic Properties of N‐Rich Salts of the 4,5‐Dicyano‐2H‐1,2,3‐triazole Anion

The synthesis and characterization of the 4,5‐dicyano‐2H‐1,2,3‐triazole anion in its 5‐aminotetrazole, 1,5‐diaminotetrazole, and 1,5‐diamino‐4‐methyl‐tetrazole salts are reported. All compounds were characterized by IR, ¹H NMR, and ¹³C NMR spectroscopy, as well as elemental analyses. Their thermal decompositions were investigated by TG‐DSC. The densities, combustion heats, and sensitivity properties were tested. Additionally, enthalpies of formation, detonation pressures, detonation velocities, and heats of detonation were calculated. The compounds have potential application in the energetic materials field.     

Chiral N,N′‐Dioxide–Scandium(III)‐Catalyzed Asymmetric Epoxidation of 2‐Arylidene‐1,3‐diketones with Hydrogen Peroxide

The catalytic asymmetric epoxidation of 2‐arylidene‐1,3‐diketones using aqueous 30% H₂O₂ as oxidant has been successfully realized by a N,N′‐dioxide–scandium(III) triflate [Sc(OTf)₃] complex, giving the corresponding products in moderate to good yields (up to 85%) with excellent enantioselectivities (up to 99% ee) under mild reaction conditions without extra additives.

     

Palladium‐Catalyzed Intramolecular Annulation of 3‐[2‐(2‐Iodobenzylamino)aryl]‐N‐arylpropiolamides: Synthesis of 3‐[5H‐Dibenzo[b,e]azepin‐11(6H)‐ylidene]indolin‐2‐ones

A novel palladium‐catalyzed intramolecular tandem annulation method is presented for the synthesis of 3‐[5H‐dibenzo[b,e]azepin‐11(6H)‐ylidene]indolin‐2‐ones. This method allows the conversion of various 3‐[2‐(2‐iodobenzylamino)aryl]‐N‐arylpropiolamides to the corresponding 3‐[5H‐dibenzo[b,e]azepin‐11(6H)‐ylidene]indolin‐2‐ones through the diarylation of an alkyne.     

Bis (2‐mercapto‐ethyl) amine modification of macroporous sulfonic resin catalyst in bisphenol‐a synthesis

A novel catalyst for bisphenol‐A synthesis was prepared by bis (2‐mercapto‐ethyl) amine adsorbed on macroporous sulfonic resin through neutralization reaction. The physicochemical properties of two resin catalysts before and after bis (2‐mercapto‐ethyl) amine absorption were compared by scanning electron microscope and nitrogen adsorption. The kinetic of the new catalyst preparation process was studied and it was found that this is a chemical adsorption and endothermic process. The adsorption rate is mainly controlled by the intraparticle diffusion, affected by boundary layer diffusion and chemical reaction as well. The thermodynamic activation parameters were calculated. Compared with unmodified catalyst, the modified resin catalyst showed higher selectivity and acetone conversion in the continuous bisphenol‐A synthesis process. © 2013 American Institute of Chemical Engineers AIChE J, 59: 3816–3823, 2013     

Generation of 11‐Fluoro‐11H‐indeno[1,2‐c]quinolines via a Palladium‐Catalyzed Three‐Component Reaction of 2‐Alkynylbromobenzenes, 2‐Alkynylanilines,and N‐Fluorobenzenesulfonimide

A novel and efficient synthesis of 11‐fluoro‐11H‐indeno[1,2‐c]quinolines has been developed via a palladium‐catalyzed three‐component reaction of 2‐alkynylbromobenzenes, 2‐alkynylanilines, and N‐fluorobenzenesulfonimide. The reaction works well with high selectivity. Additionally, the diversity and complexity could be easily introduced via a simple operation from readily available starting materials. In the meantime, a fluorine atom could be incorporated into the scaffold during the reaction process.     

Copper(I)‐Catalyzed Stereoselective Synthesis of (1E,3E)‐2‐ Sulfonyl‐1,3‐dienes from N‐Propargylic Sulfonohydrazones

A new method for the stereoselective synthesis of highly substituted (1E,3E)‐2‐sulfonyl‐1,3‐dienes from N‐propargylic sulfonohydrazone derivatives has been developed via copper(I)‐catalyzed [3,3] rearrangement and highly regioselective migration of the sulfonyl group.