Synergistic effects of fumed silica on intumescent flame‐retardant polypropylene

The synergistic effects of fumed silica on the thermal and flame‐retardant properties of intumescent flame retardant (IFR) polypropylene based on the NP phosphorus‐nitrogen compound have been studied by Fourier transfer infrared (FTIR) spectroscopy, cone calorimeter test (CCT), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), limiting oxygen index (LOI), and UL‐94 tests. The LOI and UL‐94 data show that when ≤1 wt % fumed silica substituted for the IFR additive NP can increase 2 to 4% LOI values of the PP blends and keep the V‐0 rating. The data obtained from the CCT tests indicate the heat release rates (HRR) reduce by about 23% for the PP/NP sample with 0.5 wt % fumed silica, whereas the mass loss rates (MLR) and total heat release (THR) values are much lower than those of the PP/NP samples without fume silica. The TGA data demonstrate that a suitable amount of fumed silica can increase the thermal stability and charred residue of the PP/IFR/SiO₂ blends after 500°C. The morphological structures of charred residues observed by SEM give positive evidence that a suitable amount of fumed silica can promote the formation of compact intumescent charred layers and prevent the charred layers from cracking, which effectively protects the underlying polymer from burning. The dynamic FTIR spectra reveal that the synergistic flame‐retardant mechanism of a suitable amount of fumed silica with IFR additive is due to its physical process in the condensed phases. However, a high loading of fumed silica restricts the formation of charred layers with P? O? P and P? O? C complexes formed from burning of polymer materials and destroys the swelling behavior of intumescent charred layers, which deteriorates the flame retardant and thermal properties of the PP/IFR blends. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

A novel intumescent flame‐retardant epoxy resins system

Pentaerythritol diphosphonate melamine–dicyandiamide–formaldehyde resin salt, a novel macromolecular intumescent flame retardants (IFR), was synthesized, and its structure was a caged bicyclic macromolecule containing phosphorus characterized by IR, NMR and element analysis. The flame retardancy and thermal behavior of a new IFR system for epoxy resin were investigated by LOI, UL‐94 test, TG, and IR. Activation energy for the decomposition of samples was obtained using Kissinger equation. 25% of weight of IFR were doped into epoxy resin to get 27.5 of LOI and UL 94 V‐0. The TG curves and IR spectra show that IFR decreases the initial decomposition temperature and the maximum weight loss rate of epoxy resin, and enhances the thermal stability of epoxy resin at high temperatures and char yield. The activation energy for epoxy resin containing IFR was decreased by 44.8 kJ/mol, which shows that IFR can catalyze decomposition of epoxy resin. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synergistic flame retardant effect of BiFeO3 in intumescent flame‐retardant polypropylene composites

The BiFeO₃ was used to intumescent flame retardant (IFR) polypropylene (PP) composites as a synergist. The limiting oxygen index (LOI) and UL‐94 tests indicated that there is an optimum synergistic concentration of BiFeO₃ in the PP/IFR composites. Thermogravimetric analysis (TG) results of flame retardant PP showed that the moderate of BiFeO₃ can reduce the decomposition rate of sample at high temperatures. TG of APP/PER/BiFeO₃ showed that BiFeO₃ main affects the third mass loss stage of APP/PER. So the morphology and composition of the char residue of APP/PER/BiFeO₃ composites were characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and laser Raman spectroscopy (LRS). An appropriate amount of BiFeO₃ can react with APP/PER forming Bi O P and Fe O P bond, and so more P elements was involved in a crosslinking reaction to form more stable char residue, which can effectively increase the flame retardant properties of PP. POLYM. COMPOS., 38:2771–2778, 2017. © 2015 Society of Plastics Engineers     

Preparation of a novel phosphorus‐ and nitrogen‐containing flame retardant and its synergistic effect in the intumescent flame‐retarding polypropylene system

A novel phosphorus‐ and nitrogen‐containing flame retardant (melamine phytate) was synthesized via the reaction between melamine and phytic acid. The chemical structure of melamine phytate (MPA) was confirmed by Fourier transform‐infrared spectra (FT‐IR) and elemental analysis. And the thermal behavior of MPA investigated by thermogravimetric analysis (TGA) demonstrates that MPA possesses a good char‐forming ability at high temperature. Besides, limiting oxygen index (LOI) and vertical burning tests (UL‐94) illustrate that polypropylene/melamine phytate/dipentaerythritol (PP/MPA/DPER) (70/22.5/7.5) can reach the LOI value of 28.5% and achieve V‐0 rating at the flame retardant loading of 30 wt%. Except that, the thermal weight loss of MPA and DPER in PP composites was investigated by TGA in detail. Moreover, the char residue of PP composite after combustion was systematically analyzed by FT‐IR, scanning electron microscope (SEM) and X‐ray photoelectron spectroscopy (XPS), which can further propose and confirm the flame retardant mechanism. POLYM. COMPOS., 36:1606–1619, 2015. © 2014 Society of Plastics Engineers     

Microencapsulation of intumescent flame‐retardant agent: Application to flame‐retardant natural rubber composite

The first part of this investigation focused on the synthesis and characterization of a microencapsulated intumescent flame retardant (MIFR) agent. Two steps were used in the synthesis process. The structure was characterized by scanning electron microscopy, thermogravimetric anaylysis, and Fourier transform infrared spectroscopy. The addition of this MIFR agent into natural rubber (NR) led to an improvement in its physicomechanical and flame‐retardant (FR) properties. The second part focused on the evaluation of such characteristics as cure characteristics, FR property, tensile properties, abrasion resistance, and dynamic mechanical analysis of MIFR filled NR composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1828–1838, 2007     

Extrusion with ultrasound applied on intumescent flame‐retardant polypropylene

In this work, the effect of processing conditions on the production of an intumescent flame‐retardant system is studied in polypropylene‐based compounds. Two distinct procedures were used: ultrasonic assisted single screw (with a static mixer die) and twin screw extrusion. The flame‐retardant, thermal, mechanical, morphological, and rheological properties were measured. It was found that the flame‐retardant intumescent content can be diminished from 30 phr (as usually used) to 21 phr using the application of ultrasonic waves during extrusion and with the addition of chemically modified clay to obtain a V0 classification according to UL94‐V standards. In addition, the processed materials presented improvements in the mechanical properties such as impact resistance (Izod Notched), strain at break and tenacity upon ultrasound application. The online application of ultrasound through a die that produces extensional flows improved greatly the dispersion and distribution of the particles of the intumescent system and the chemically modified clay in the polymer matrix. POLYM. ENG. SCI., 2013. © 2013 Society of Plastics Engineers     

A novel intumescent flame‐retardant system for flame‐retarded LLDPE/EVA composites

A new intumescent flame retardant (IFR) system consisting of ammonium polyphosphate (APP) and charing‐foaming agent (CFA) and a little organic montmorillonite (OMMT) was used in low‐density polyethylene (LLDPE)/ethylene‐vinyl acetate (EVA) composite. According to limiting oxygen index (LOI) value and UL‐94 rating obtained from this work, the reasonable mass ratio of APP to CFA was 3 : 1, and OMMT could obviously enhance the flame retardancy of the composites. Cone calorimeter (CONE) and thermogravimetric analysis (TGA) were applied to evaluate the burning behavior and thermal stability of IFR‐LLDPE/EVA (LLDPE/EVA) composites. The results of cone calorimeter showed that heat release rate peak (HRR‐peak) and smoke production rate peak (SPR‐peak) and time to ignition (TTI) of IFR‐LLDPE/EVA composites decreased clearly compared with the pure blend. TGA data showed that IFR could enhance the thermal stability of the composites at high temperature and effectively increase the char residue. The morphological structures of the composites observed by scanning electron microscopy (SEM) and X‐ray diffraction (XRD) demonstrated that OMMT could well disperse in the composites without exfoliation, and obviously improve the compatibility of components of IFR in LLDPE/EVA blend. The morphological structures of char layer obtained from Cone indicated that OMMT make the char layer structure be more homogenous and more stable. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of novel triazine charring agent and its effect in intumescent flame‐retardant polypropylene

A novel charring agent (CNCA‐DA) containing triazine and benzene ring, using cyanuric chloride, aniline, and ethylenediamine as raw materials, was synthesized and characterized. The effects of CNCA‐DA on flame retardancy, thermal degradation, and flammability properties of polypropylene (PP) were investigated by limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis (TGA), and cone calorimeter test (CCT). The TGA results showed that CNCA‐DA had a good char forming ability, and a high initial temperature of thermal degradation; the char residue of CNCA‐DA reached 18.5% at 800°C; Ammonium polyphosphate (APP) could improve the char residue of APP/CNCA‐DA system, the char residue reached 31.6% at 800°C. The results from LOI and UL‐94 showed that the intumescent flame retardant (IFR) containing CNCA‐DA and APP was very effective in flame retardancy of PP. When the mass ratio of APP and CNCA‐DA was 2 : 1, and the IFR loading was 30%, the IFR showed the best effect; the LOI value reached 35.6%. It was also found that when the IFR loading was only 20%, the flame retardancy of PP/IFR can still pass V‐0 rating in UL‐94 tests, and its LOI value reached 27.1%. The CCT results demonstrated that IFR could clearly change the decomposition behavior of PP and form a char layer on the surface of the composites, consequently resulting in efficient reduction of the flammability parameters, such as heat release rate (HRR), total heat release (THR), smoke production rate (SPR), total smoke production (TSP), and mass loss (ML). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Flammability and thermal degradation of intumescent flame‐retardant polypropylene composites

The flammability of polypropylene (PP) composites containing intumescent flame‐retardant additives, i.e., melamine pyrophosphate (MPP) and 1‐oxo‐4‐hydroxymethyl‐2,6,7‐trioxa‐1‐phosphabicyclo[2.2.2]octane (PEPA) was characterized by limiting oxygen index (LOI), UL 94 test, and cone calorimeter. In addition, the thermal degradation of the composites was studied using thermogravimetric analysis (TG) and real‐time Fourier transform infrared (RTFTIR). It has been found that the PP composite only containing MPP (or PEPA) does not show good flame retardancy even at 30% additive level. Compared with the PP/MPP binary composite, the LOI values of the PP/MPP/PEPA ternary composites at the same additive loading are all increased, and UL 94 rating of the ternary composite (PP3) studied is raised to V‐0 rating from no rating (PP/MPP). The cone calorimeter results show that the heat release rate of some ternary composites decreases in comparison with the binary composite. It is noted from the TG data that initial decomposition temperatures of ternary composites are lower than that of the binary composites. The RTFTIR study indicates that the PP/MPP/PEPA composites have higher thermal oxidative stability than the pure PP. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Synergistic effects of polyethylene glycol and ammonium polyphosphate on intumescent flame‐retardant polypropylene

A novel flame‐retardant system of isotactic polypropylene (iPP) is prepared using polyethylene glycol (PEG) and ammonium polyphosphate (APP). The flammability of iPP/PEG/APP composites containing 20 wt% APP improves with the increase of PEG concentration in the range of 3–15 wt%. The limit oxygen index (LOI) of iPP/PEG/APP composites reaches up to 30% with 15 wt% PEG concentration in the composites. At the same time, the mechanical properties of iPP/PEG/APP composites demonstrate that PEG can enhance toughness of iPP/APP composites. The results of cone calorimetry prove the synergistic effects of PEG and APP on intumescent flame‐retardant iPP, and those of the thermogravimetric analysis(TGA) reveal that iPP/PEG/APP samples decompose faster than iPP/APP composites. Investigated by scanning electronic microscopy (SEM), the morphology and structures of residues generated during LOI tests confirm the formation of effective char layer, and that the improvement of the flame retardancy and the impact strength of the composites are thanks to the presence of PEG. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Application of functionalized graphene oxide in flame‐retardant polypropylene

A surface functionalized graphene oxide (FGO) was prepared by a simple and efficient method of treating graphene oxide (GO) with pentaerythritol (PER) in water using an ultrasound process. After the PER was grafted onto the surface of the GO, the GO became hydrophobic instead of hydrophilic and precipitated as a dark brown material. The results of Fourier‐transform infrared analysis, X‐ray photoelectron spectroscopy, X‐ray diffraction, and transmission electron microscopy demonstrated that the PER had been successfully attached to the GO. Subsequently, the FGO was incorporated into the intumescent flame‐retardant‐polypropylene system. The presence of FGO improved the flame‐retardant efficiency as evidenced by the limiting oxygen index (LOI) and vertical burning test (UL‐94) test. Analysis by scanning electronic microscopy indicated that the FGO promoted the formation of a continuous, intact residual char layer on the surface of the polymer, which acts as an insulating barrier to protect the base material. As a result, it delayed the peak of heat release rate and increased the residual mass obtained on combustion of the polymer. J. VINYL ADDIT. TECHNOL., 21:278–284, 2015. © 2014 Society of Plastics Engineers     

Synergistic effect of mesoporous silica SBA‐15 on intumescent flame‐retardant polypropylene

Mesoporous silica SBA‐15 synthesized from Pluronic P123 and tetraethoxysilane was used as a synergistic agent on the flame retardancy of polypropylene (PP)/intumescent flame‐retardant (IFR) system. Limiting oxygen index (LOI), UL‐94 rating and thermogravimetric analysis were used to evaluate the synergistic effect of SBA‐15 on PP/IFR system. It showed that PP/IFR system could reach V‐0 with loading of SBA‐15 ranging from 0.5 to 3 wt%, while without SBA‐15 it had no rating at UL‐94 test. The LOI value increased from 25.5 to 32.2 when the loading of SBA‐15 was 1 wt%. The thermal stability of PP/IFR was improved in the presence of SBA‐15 and the amount of the char residue at 600° C was increased from 8.96 to 16.42 wt% when loading of SBA‐15 varied from 0.5 to 5 wt%. Laser Raman spectroscopy (LRS) and scanning electron microscopy were employed to study the morphology of the char residue of PP/IFR system with and without SBA‐15. Copyright © 2010 John Wiley & Sons, Ltd.     

Thermal degradation and combustion behavior of intumescent flame‐retardant polypropylene with novel phosphorus‐based flame retardants

The objective of this study was to develop an environmentally friendly fire‐retardant polypropylene (PP) with significantly improved fire‐retardancy performance with a novel flame‐retardant (FR) system. The system was composed of ammonium polyphosphate (APP), melamine (MEL), and novel phosphorus‐based FRs. Because of the synergistic FR effects among the three FRs, the FR PP composites achieved a V‐0 classification, and the limiting oxygen index reached as high as 36.5%. In the cone calorimeter test, both the peak heat‐release rate (pHRR) and total heat release (THR) of the FR PP composites were remarkably reduced by the incorporation of the novel FR system. The FR mechanism of the MEL–APP–FR–PP composites was investigated through thermogravimetric analysis and char residue characterization, and the results reveal that the addition of MEL–APP–FRs promoted the formation of stable intumescent char layers. This led to the reduction of pHRR and THR and resulted in the improvement of the fire retardancy. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45962.     

Synergistic effects of tetrabutyl titanate on intumescent flame‐retarded polypropylene

The synergistic mechanism of tetrabutyl titanate (TBT) in the intumescent flame‐retardant polypropylene (PP) composites was investigated in this work. The intumescent flame‐retardant was composed of pentaerythritol (PER) as a carbonizing agent ammonium polyphosphate (APP) as a dehydrating agent and blowing agent. Five different concentrations (1, 1.25, 1.5, 1.75, 2 wt %) of TBT were incorporated into flame retardant formulation to investigate the synergistic mechanism. The thermal degradation and flammability of composites were characterized by thermogravimetric analysis (TGA), limiting oxygen index (LOI), and UL‐94 tests. The morphology and chemical structure of char layer was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and energy dispersive spectrometer (EDS). The results showed that LOI was increased from 27.8 to 32.5%, with the increase of TBT content from 0 to 1.5 wt %. Results from SEM, and FTIR demonstrated that TBT could react with APP and PER to form the stable char layer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4255–4263, 2013     

Polypropylene–intumescent flame‐retardant composites based on meleated polypropylene as a coupling agent

The phosphoric acid‐pentaerythritol‐melamine copolymer, which is composed of three main components of intumescent flame retardant (IFR) and has optimal intumescent degree, was selected as IFR. The influence of meleated polypropylene (PP‐g‐MAH) on the properties and compatibility of IFR polypropylene (PP) composites were studied. The results obtained from mechanical tests, rheological behavior of composites, and scanning electron microscope showed that PP‐g‐MAH was a true coupling agent for IFR/PP blends and did not change the necessary flame retardancy. The cocrystallization between bulk PP and PP segments of PP‐g‐MAH was also proven by WAXD analysis. Flow test showed that the flow behaviors of composites in the melt are those of a pseudoplastic and it is very small for PP‐g‐MAH affecting rheological behavior of the PP/IFR composite. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 257–262, 2002     

Preparation of a chitosan‐based flame‐retardant synergist and its application in flame‐retardant polypropylene

A novel flame‐retardant synergist, chitosan/urea compound based phosphonic acid melamine salt (HUMCS), was synthesized and characterized by Fourier transform infrared spectroscopy and ³¹P‐NMR. Subsequently, HUMCS was added to a fire‐retardant polypropylene (PP) compound containing an intumescent flame‐retardant (IFR) system to improve its flame‐retardant properties. The PP/IFR/HUMCS composites were characterized by limiting oxygen index (LOI) tests, vertical burning tests (UL‐94 tests), microscale combustion calorimetry tests, and thermogravimetric analysis to study the combustion behavior and thermal stability. The addition of 3 wt % HUMCS increased the LOI from 31.4 to 33.0. The addition of HUMCS at a low additive amount reduced the peak heat‐release rate, total heat release, and heat‐release capacity obviously. Furthermore, scanning electron micrographs of char residues revealed that HUMCS could prevent the IFR–PP composites from forming a dense and compact multicell char, which could effectively protect the substrate material from combusting. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40845.     

Effects of organopalygorskite on intumescent flame‐retarded polypropylene

The effect of organopalygorskite (OPGS) on an intumescent flame retardant (IFR) low‐density polypropylene (PP) has been investigated using the limited oxygen index (LOI), vertical burning test (UL‐94) and thermogravimetric analysis (TGA). The results of the LOI and UL‐94 tests indicate that the addition of OPGS substantially increases the LOI value for PP/IFR at a OPGS to IRF mass ratio of 2/28 with 30 wt% of total flame retardant. In addition, the samples pass the V‐0 rating in the UL‐94 tests. The results indicate that the addition of 2.0 wt% of OPGS simultaneously increases the tensile strength and bending strength of PP/IFR. J. VINYL ADDIT. TECHNOL., 24:281–287, 2018. © 2016 Society of Plastics Engineers     

Aging of the flame‐retardant properties of polycarbonate and polypropylene protected by an intumescent coating

Flame retardancy (FR) in polycarbonate (PC) and polypropylene (PP) was obtained through the application of an intumescent coating on the polymeric substrate. A better performance was obtained with PC, a char former and highly viscous polymer, compared to with PP. Indeed, whereas 61 μm was required to obtain good FR (by the UL94 V0 rating, in particular) in the case of PC, at least 158 μm needed to be used to give FR to PP. The aging of the coated materials induced by UV‐filtered light radiation was then studied. This exposure led to a decrease in the FR. This effect was more pronounced in the case of PP compared to that of PC. The decrease in the FR was attributed to a decrease in the adhesion of the coating on the polymeric substrate because of its suspected physical aging. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39566.     

The investigation of intumescent flame‐retardant polypropylene using a new macromolecular charring agent polyamide 11

This article deals with a new macromolecular charring agent, polyamide 11 (PA11), which is in combination with a small charring agent, pentaerythritol (PER) and a flame retardant, ammonium polyethylene to flame‐retardant polypropylene (PP). When compared with polyamide 6 (PA6), an existing macromolecular charring agent extensively reported, PA11 has longer alkyl segment in its chain unit and shows better compatibility with PP; additionally, with a relatively lower melt point close to that of PP, PA11 can be more effectively compounded with PP in the melt state and better dispersed in PP matrix, thus enhancing the flame retardancy and mechanical properties. Moreover, with certain synergistic effects between PA11 and PER, the system using PA11/PER as composite charring agents showed better charring performance in comparison with the system only using PER. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Flame retardancy and mechanical properties of a novel intumescent flame‐retardant unsaturated polyester

A novel macromolecular intumescent flame retardant (MIFR) was synthesized. Unsaturated polyester (UP) filled with MIFR as flame‐retardant additive was prepared. The effects of MIFR on properties such as tensile strength, impact strength, flame‐retardant behavior, thermal stability, and morphology of char were studied. Its flammability and burning behavior were characterized by UL 94 and limiting oxygen index. Twenty‐four percent of MIFR were doped into UP to get 30.5% of limiting oxygen index and UL 94 V‐0, whereas its tensile strength and the impact strength were decreased by only 7.2% and 7.0%, respectively. Activation energy for the decomposition of samples was obtained by using the Kissinger equation. The results for UP containing MIFR, compared with UP, show that the weight loss, thermal stability, and the decomposition activation energy decreased, and the char yield increased, showing that MIFR can catalyze decomposition and carbonization of UP to form an effective charring layer to protect the underlying substrate. J. VINYL ADDIT. TECHNOL., 22:350–355, 2016. © 2014 Society of Plastics Engineers