Electrochemical synthesis and In situ spectroelectrochemistry of conducting NMPy‐TiO2 and ZnO polymer nanocomposites for Li secondary battery applications

Poly(N‐methylpyrrole) (PNMPy), poly(N‐methylpyrrole‐TiO₂) (PNMPy‐TiO₂), and poly (N‐methylpyrrole‐ZnO) (PNMPy‐ZnO) nanocomposites were synthesized by in situ electropolymerization for cathode active material of lithium secondary batteries. The charge–discharging behavior of a Li/LiClO₄/PNMPy battery was studied and compared with Li/LiClO₄/PNMPy‐nanocomposite batteries. The nanocomposites and PNMPy films were characterized by cyclic voltammetry, in situ resistivity measurements, in situ UV–visible, and Fourier transform infra‐red (FTIR) spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The differences between redox couples (ΔE) were obtained for polymer nanocomposites and PNMPy films. During redox scan, a negative shift of potential was observed for polymer nanocomposite films. Significant differences from in situ resistivity of nanocomposites and PNMPy films were obtained. The in situ UV–visible spectra for PNMPy and polymer nanocomposite films show the intermediate spectroscopic behavior between polymer nanocomposites and PNMPy films. The FTIR peaks of polymer nanocomposite films were found to shift to higher wavelengths in PNMPy films. The SEM and TEM micrographs of nanocomposite films show the presence of nanoparticle in PNMPy backbone clearly. The result suggests that the inorganic semiconductor particles were incorporated in organic conducting PNMPy, which consequently modifies the properties and morphology of the film significantly. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41526.     

Thermal stability of HCl‐doped‐polyaniline and TiO2 nanoparticles‐based nanocomposites

Electrically conductive HCl doped polyaniline (Pani) : titanium dioxide (TiO₂) nanocomposites thin films were prepared by in‐situ oxidative polymerization of aniline in the presence of different amounts of TiO₂ nanoparticles. Later film casting was done using N‐Methyl‐2‐pyrrolidone (NMP) as a solvent. The formation of Pani : TiO₂ nanocomposites were characterized by Fourier Transform Infra‐Red spectroscopy (FTIR), x‐ray diffraction (XRD) and thermogravimetric analysis (TGA). The stability of the nanocomposites in terms of direct‐current electrical conductivity retention was studied in air by isothermal and cyclic techniques. The films of Pani : TiO₂ nanocomposites were observed thermally more stable under ambient environmental conditions than pure polyaniline film. The stability was seen to be highly dependent on the content of TiO₂ nanoparticles in the nanocomposite films. Due to their high stability, such type of nanocomposites can find place as a replacement material for pure polyaniline in electrical and electronic devices. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and dielectric properties of polyaniline/titanium dioxide nanocomposites

Two series of polyaniline–TiO₂ nanocomposite materials were prepared in base form by in situ polymerization of aniline with inorganic fillers using TiO₂ nanoparticles (P25) and TiO₂ colloids (Hombikat), respectively. The effect of particle sizes and contents of TiO₂ materials on their dielectric properties was evaluated. The as-synthesized polyaniline–TiO₂ nanocomposite materials were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR), thermal analysis (DTA/TGA), and X-ray diffraction (XRD). Dielectric properties of polyaniline–TiO₂ nanocomposites in the form of films were measured at 1 KHz–1 MHz and a temperature range of 35–150 °C. Higher dielectric constants and dielectric losses of polyaniline–TiO₂ nanocomposites than those of neat PANI were found. PANI–TiO₂ nanocomposites derived from P25 exhibited higher dielectric constants and losses than those from Hombikat TiO₂ colloids. Electrical conductivity measurements indicate that the conductivity of nanocomposites is increased with TiO₂ content. The dielectric properties and conductivities are considered to be enhanced due to the addition of TiO₂, which might induce the formation of a more efficient network for charge transport in the base polyaniline matrix.     

Ferromagnetic polyaniline/TiO2 nanocomposites

Novel ferromagnetic semiconducting polyaniline PANI/TiO₂ nanocomposites were synthesized by the oxidative polymerization of aniline with ammonium peroxydisulfate in an aqueous medium, in the presence of colloidal TiO₂ nanoparticles (d ∼ 4.5 nm), without added acid. The morphological, magnetic, structural, and optical properties of the PANI/TiO₂ nanocomposites prepared at initial aniline/TiO₂ mole ratios 80, 40, and 20 were studied by scanning electron microscopy, superconducting quantum interference device, X‐ray powder diffraction, FTIR, Raman, and UV‐Vis spectroscopies. The emeraldine salt form of linear PANI chains as well as the presence of phenazine units, branched PANI chains, and anatase crystalline structure of TiO₂ in PANI/TiO₂ nanocomposites was confirmed by FTIR and Raman spectroscopies. The electrical conductivity of synthesized composites was ∼10⁻³ S cm⁻¹. The room temperature ferromagnetic response with coercive field of H_c ∼ 300 Oe and the remanent magnetization of M_r ∼ 4.35 × 10⁻⁴ emu/g was detected in all investigated PANI/TiO₂ nanocomposites. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Preparation of transparent PVA/TiO2 nanocomposite films with enhanced visible-light photocatalytic activity

Polymer/semiconductor oxide nanocomposite films have been intensively investigated for various applications. In this work, we reported a simple hydrothermal method to fabricate highly transparent poly(vinyl alcohol)/titanium dioxide (PVA/TiO₂) nanocomposite films with enhanced visible-light photocatalytic activity. The as-prepared PVA/TiO₂ nanocomposite films showed high optical transparency in the visible region even at a high TiO₂ content (up to 40 wt.%). The determination of photocatalytic activity by photodegradation of methyl orange (MO) and colorless phenol showed that PVA/TiO₂ nanocomposite films exhibited enhanced visible-light photocatalytic activity and excellent recycle stability. This work provided new insights into fabrication of polymer/TiO₂ nanocomposites as high performance photocatalysts in waste water treatment.     

Enhanced dielectric constant and suppressed electrical conductivity in polymer nanocomposite films via loading MXene/TiO2/MoS2 nanosheets

Conductor/polymer nanocomposites can achieve high dielectric constant with low filler loading, but conductive fillers come into contact with each other easily, resulting in the formation of conductive paths. In this work, MXene/TiO₂/MoS₂ nanosheets were prepared by one-step hydrothermal method, and MXene/TiO₂/MoS₂/poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) nanocomposite films were prepared by solution casting method. At 1 kHz, with an optimized MXene/TiO₂/MoS₂ nanosheets loading of 8.0 wt%, MXene/TiO₂/MoS₂/P(VDF-HFP) nanocomposite films achieve a high dielectric constant of 944 and maintain a low dielectric loss of 0.19. TiO₂ and MoS₂ semiconductive layers on the surface of MXene nanosheets can prevent the formation of conductive paths, and therefore, nanocomposite films possess suppressed electrical conductivity. Moreover, MXene/TiO₂/MoS₂ nanosheets can build more microcapacitor structures in nanocomposite films with higher filler loading, which further improves the dielectric constant of nanocomposite films. Finite element simulation shows that TiO₂ and MoS₂ semiconductive layers can lower the electric field intensity and polarization intensity at the interface between conductive fillers and polymer matrix. Herein, MXene/TiO₂/MoS₂/P(VDF-HFP) nanocomposite films possess not only excellent dielectric properties, but also excellent mechanical properties, which can be used as flexible dielectric materials in electronic packaging technology.     

A hydrogen peroxide sensor based on a horseradish peroxidase/polyaniline/carboxy-functionalized multiwalled carbon nanotube modified gold electrode

We have developed a polyaniline/carboxy-functionalized multiwalled carbon nanotube (PAn/MWCNTCOOH) nanocomposite by blending the emeraldine base form of polyaniline (PAn) and carboxy-functionalized multiwalled carbon nanotubes (MWCNT) in dried dimethyl sulfoxide (DMSO) at room temperature. The conductivity of the resulting PAn/MWCNTCOOH was 3.6 × 10⁻³ S cm⁻¹, mainly as a result of the protonation of the PAn with the carboxyl group and the radical cations of the MWCNT fragments. Horseradish peroxidase (HRP) was immobilized within the PAn/MWCNTCOOH nanocomposite modified Au (PAn/MWCNTCOOH/Au) electrode to form HRP/PAn/MWCNTCOOH/Au for use as a hydrogen peroxide (H₂O₂) sensor. The adsorption between the negatively charged PAn/MWCNTCOOH nanocomposite and the positively charged HRP resulted in a very good sensitivity to H₂O₂ and an increased electrochemically catalytical current during cyclic voltammetry. The HRP/PAn/MWCNTCOOH/Au electrode exhibited a broad linear response range for H₂O₂ concentrations (86 μM–10 mM). This sensor exhibited good sensitivity (194.9 μA mM⁻¹ cm⁻²), a fast response time (2.9 s), and good reproducibility and stability at an applied potential of −0.35 V. The construction of the enzymatic sensor demonstrated the potential application of PAn/MWCNTCOOH nanocomposites for the detection of H₂O₂ with high performance and excellent stability.     

Enhanced photoresponse and photocatalytic activities of graphene quantum dots sensitized Ag/TiO2 thin film

TiO₂ thin films were fabricated through hydrothermal method. Silver nanoparticles were loaded on TiO₂ thin films via photoreduction technique. Subsequently, the graphene quantum dots (GQDs) were spin‐coated on the Ag/TiO₂ nanocomposites thin films. The crystal structure, surface morphology and UV‐vis absorbance were tested by XRD, SEM and ultraviolet‐visible spectrophotometer. These results indicated that Ag nanoparticles and GQDs are anchored on the TiO₂ nanorods. Absorbance of Ag/TiO₂ and GQDs/Ag/TiO₂ nanocomposite thin films have been extended into the visible region. Visible‐light response of the samples were investigated by electrochemical workstation. The photoresponse of the sample can be enhanced by sensitization of the Ag nanoparticles and GQDs. The enhanced visible‐light response may be due to the surface plasmon resonance of silver nanoparticles and visible absorbance of GQDs. The highest photocatalytic activity has been observed in the 9‐GQDs/Ag/TiO₂ composite thin film. The efficient charge separation and transportation can be achieved by introducing the Ag nanoparticles and GQDs in the TiO₂ thin film.     

Optical,thermal and electrical characterization of PEO/CMC incorporated with ZnO/TiO2 NPs for advanced flexible optoelectronic technologies

The optical, thermal, and electrical properties of a blend of polyethylene oxide (PEO) and carboxymethyl cellulose (CMC) are examined in the current work in relation to the effects of zinc oxide (ZnO) and titanium dioxide (TiO₂) nanoparticles. To create hybrid ZnO/TiO₂ NPs nanocomposites with a PEO/CMC matrix, the solution casting method was utilized. The XRD study results demonstrate that the nanocomposite films' crystallinity decreases with increasing ZnO/TiO₂ NP concentrations. FT-IR spectra reveal the interaction between metal oxide NPs and the PEO/CMC composite. UV/Vis analytical spectroscopy was used to calculate the optical properties, such as the energy gap (Eg), refractive index (n), and the number of carbon atoms (M). The inclusion of 7 wt%ZnO/TiO₂ NPs decreased the polymer matrix's allowed direct energy gap from 3.68 to 2.81 eV. The AC conductivity results show that the ${\sigma }_{dc}$ of the nanocomposite samples decreases with increasing ZnO/TiO₂ NPs concentrations. The ${\sigma }_{dc}$ of the final sample (PEO/CMC@7 wt% ZnO/TiO₂) was 5.18 × 10⁻⁷Scm⁻¹. According to exponential factor (S) results, the dominates conduction mechanism is correlated barrier hopping (CBH) with non-Debye relaxation processes. Space charge polarization was demonstrated by large ε′ values in the low-frequency dielectric properties, whereas an increase in energy loss may be related with a larger εʹ' value in the composite samples. These results prove that these nanocomposites can be used in a variety of energy-related devices, such as flexible capacitors, and energy storage systems.     

Preparation and blood compatibility of carbon/TiO2 nanocomposite

A carbon/TiO₂ nanocomposite, which consists of carbon film with various sp³C content and TiO₂ nanowire arrays, has been synthesized, in which the top surface of TiO₂ nanowire arrays prepared using hydrothermal method on fluorine-doped tin oxide glass were coated with carbon thin films. The carbon thin films with a higher, medium and lower sp³C content were deposited by pulsed magnetic filtered cathodic vacuum arc deposition, plasma-enhanced chemical vapor deposition and magnetron sputtering deposition, respectively. The surface morphology and structure of TiO₂ nanowire arrays were investigated by scanning electron microscopy, transmission electron microscope and X-ray diffraction. The sp³C content in carbon films was characterized using Raman spectroscopy. The blood compatibility of the samples including the TiO₂ nanowire arrays, carbon films and carbon/TiO₂ nanocomposite was assessed by tests of platelet adhesion in vitro. Results showed that the carbon/TiO₂ composite can effectively improve the anticoagulant function compared to the single materials. It is believed that the excellent blood compatibility of the carbon/TiO₂ nanocomposite is attributed to a joint function of surface properties adjusted by nanowire arrays and electronic structure of carbon thin films.     

Electrochemical Polymerization of Thiophene and Poly(3-hexyl)thiophene,Nanocomposites with TiO2, and Corrosion Protection Behaviors

Thiophene, 3-hexylthiophene, and their nanocomposites with TiO₂ were electropolymerized on Al1050 electrode by chronoamperometric technique. Different concentrations of thiophene and 3-hexylthiophene homopolymers and their nanocomposites with TiO₂ (2% in total content) were characterized by attenuated total reflection Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersion X-ray analysis, and electrochemical impedance spectroscopy. The anticorrosion tests for homopolymers and nanocomposite films were examined on Al1050 in 3.5% NaCl solution. Poly(3-hexylthiophene)/TiO₂ nanocomposite films gave the highest protection efficiency of 98% because the amount of defects was much lower than that for the poly(3-hexylthiophene), polythiophene, and polythiophene/TiO₂ films.     

Mesoporous polyaniline or polypyrrole/anatase TiO2 nanocomposite as anode materials for lithium-ion batteries

A functional composite as anode materials for lithium-ion batteries, which contains highly dispersed TiO₂ nanocrystals in polyaniline matrix and well-defined mesopores, is fabricated by employing a novel one-step approach. The as-prepared mesoporous polyaniline/anatase TiO₂ nanocomposite has a high specific surface area of 224 m² g⁻¹ and a predominant pore size of 3.6 nm. The electrochemical performance of the as-prepared composite as anode material is investigated by cyclic voltammograms and galvanostatic method. The results demonstrate that the polyaniline/anatase nanocomposite provides larger initial discharge capacity of 233 mAh g⁻¹ and good cycle stability at the high current density of 2000 mA g⁻¹. After 70th cycles, the discharge capacity is maintained at 140 mAh g⁻¹. The excellent electrochemical performance of the polyaniline/TiO₂ nanocomposite is mainly attributed to its special structure. Furthermore, it is accessible to extend the novel strategy to other polymer/TiO₂ composites, and the mesoporous polypyrrole/anatase TiO₂ is also successfully fabricated.     

Sol-gel synthesis and antibacterial study on BC/ZnO/TiO2 nanocomposite treated by DC glow discharge plasma

Nanocomposite material of bamboo charcoal (BC), zinc oxide (ZnO), and titanium dioxide (TiO₂) has prepared via sol–gel method. The synthesized nanocomposite surface was modified by a DC glow discharge plasma treatment. Characterization methods such as BET, SEM, XRD, FTIR, UV, and EDAX are utilized to examine the presence of all the three materials and their combination structure. The combined and plasma-modified surface structure of the bamboo charcoal/zinc oxide/titanium dioxide (BC/ZnO/TiO₂) nanocomposite has shown by microscopic images in step by step. The phase structure of the prepared nanocomposite has been identified by X-ray diffraction and the crystalline size of the composite falls between 20 and 30 nm. The antibacterial behavior of the prepared nanocomposite was assessed through disk diffusion plate method and best antibacterial performance was observed. The metal oxides and plasma treatment increased the property of the synthesized nanocomposite and also the results gave extended results compared to BC/ZnO and BC/TiO₂ in all formats.     

Evaluation of PP/EPDM nanocomposites filled with SiO2, TiO2 and ZnO nanofillers as thermoplastic elastomeric insulators

Abstract

Thermoplastic elastomer, which has important characteristics for cable insulation, was developed by melt blending of polypropylene (PP) with ethylene propylene diene monomer (EPDM) at various blend ratios together with SiO₂, TiO₂ and ZnO nanofillers at fixed loading of 2 vol.-%. The influence of EPDM content and the presence of nanofillers in the blend on burning rate, hydrophobicity and dielectric breakdown strength were investigated. Burning rate of PP/EPDM/ZnO was significantly reduced, implying that there was an improvement in fire retardancy with the addition of ZnO nanofillers in the polymer blend. Both SiO₂ and ZnO filled system showed an improvement in hydrophobicity. Furthermore, dielectric breakdown strength showed higher value in EPDM rich blends. In addition, the presence of nanofillers deteriorated the dielectric breakdown strength of PP/EPDM nanocomposites.     

Comparison on photocatalytic degradation of gaseous formaldehyde by TiO2, ZnO and their composite

In order to compare the photocatalytic properties of TiO₂, ZnO and their composite in the gas phase pollutant environment, nanocomposite with different mole ratios of TiO₂/ZnO were designed to degrade gaseous formaldehyde. The results showed that the rate constant of TiO₂ for formaldehyde degradation was 0.05 min^?1 which was two orders of magnitude larger than that of ZnO in our experiment. Through comprehensive analysis of UV–vis diffuse reflectance (UV–vis) spectra, photoluminescence spectra (PL) and energy band diagram, it was found that the differences of photocatalytic properties between ZnO and TiO₂ may mainly originate from the increased recombination of photoinduced charges in ZnO. The photocatalytic properties of TiO₂/ZnO composite for formaldehyde degradation were much worse than those of TiO₂, while better than those of ZnO. The addition of a small amount of ZnO weakened the photocatalytic properties of TiO₂. It may be attributed to that the recombination action of photoinduced electron–hole pairs in ZnO.     

The TiO2–Clay-LDPE Nanocomposite Packaging Films: Investigation on the Structure and Physicomechanical Properties

The role of nanoclays and TiO₂ nanoparticle loadings were investigated on low density polyethylene crystalline structure, in addition to studying packaging film properties such as barrier, thermal and mechanical properties. The polymer crystal study indicated for the orthorhombic crystal phase and about 20% lower degree of crystallinity for nanocomposites containing more than 2 wt.% TiO₂ nanoparticles. Based on the X-ray diffraction technique, the dispersion of nanoclays was improved to almost good degree of clay exfoliation with the company of 4 wt.% TiO₂ nanoparticles. In agreement with XRD results, the TEM morphological studies mainly suggest that TiO₂ has a helpful effect on nanoclay exfoliation. The increase in degradation temperature of nanocomposites may be attributed to the formation of inorganic char on polymer melt. The barrier properties of TiO₂/clay nanocomposite packaging films depend mainly on nanoclay loading with an unclear trend from TiO₂ nanoparticles. The increase in elastic modulus and the yield stress of nanocomposite films showed great effects on film mechanical properties by nanoclays.     

A novel approach for the synthesis of highly active ZnO/TiO2/Ag2O nanocomposite and its photocatalytic applications

The present work is focused on the preparation of hybrid ZnO/TiO₂/Ag₂O nanocomposite for enhanced photocatalytic activity. The resultant samples are characterized by using XRD, SEM, EDX, HR-TEM, UV-DRS, BET and XPS techniques. X-ray diffraction analysis indicates the co-existence of wurtzite, anatase and cubic phases in ZnO/TiO₂/Ag₂O nanocomposite. The band gap energy value of the photocatalyst is 3.39 eV, which has been evidenced from UV–visible diffuse reflectance spectroscopy measurements. Photocatalytic degradation of methylene blue dye has been investigated by using UV–visible spectrophotometer. From the result, it has been concluded that ZnO/TiO₂/Ag₂O nanocomposite has proven to be an efficient photocatalyst under UV irradiation when compared to that of mono and binary oxide systems. Further, the possible photodegradation mechanism is proposed to support the enhancement of photocatalytic activity towards degradation of dyes.     

Pulsed laser ablation in liquid synthesis of ZnO/TiO2 nanocomposite catalyst with enhanced photovoltaic and photocatalytic performance

In this work, we employed an impurity-free nanoparticle synthesis technique, known as pulsed laser ablation in liquid (PLAL), to integrate titanium dioxide nanoparticles (TiO₂ NPs) into zinc oxide nanorods (ZnO NRs) with varying relative proportions. The main objective of this integration was to enhance the charge carrier separation of photo-generated electron hole pairs during solar irradiation. For the synthesis process, an Nd:YAG laser at 532 nm wavelength was applied as an ablation source, along with deionized water as a solvent medium in which the precursor materials were dispersed prior to laser irradiation. The nanocomposites were characterized by X-ray diffraction (XRD), UV–vis absorption and in-situ Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HR-TEM) and field emission scanning electron microscopy (FE-SEM). The synthesized nanocomposites were primarily utilised in two applications: firstly, as a catalyst in the degradation of methyl orange (MO) and secondly, as photo-anode in dye sensitized solar cell (DSSC). Our research has demonstrated that optimal performance was obtained for the nanocomposite containing 10% and 90% (by weight) TiO₂ NPs and ZnO respectively, which we define as the ideal nanocomposite. Relative to pure ZnO, the photo-conversion efficiency of the ideal composite was improved substantially by 63.73%, whilst the photo-degradation rate was enhanced by 3 fold. The oxidation state and the microstructural of the segregated ideal nanocomposite confirms that oxygen vacancy defects were created when perfect surface integration occurs between TiO₂ and ZnO. Nonetheless, we believe that the performance enhancement is predominantly due to the excellent charge carrier separation and fast interfacial electron flow in this nanocomposite.     

Fabrication of a New Polyimide/Titania (TiO2) Nanocomposite Thin Film by the Sol-Gel Route

Polyimide/titania nanocomposite (PI/TiO₂ NC) was successfully fabricated through the in situ formation of TiO₂ within a PI matrix by the sol-gel process. FT-IR and XRD results confirmed the formations of the TiO₂ in the PI matrix. Transmission electron microscopy of the NC10% showed that the TiO₂ phase was well dispersed in the polymer matrix. The mechanical properties of the NC films were increased and elongation at break decreased with increasing TiO₂ content. Thermogravimetric analysis results revealed that the decomposition temperature of hybrid materials was increased with an increase in the content of TiO₂ nanoparticles within the NC films.     

Microwave absorption property of polyaniline nanocomposites containing TiO2 and Fe3O4 nanoparticles after FeCl36H2O treatment

It is important to manipulate the synthesis parameters or additives used in order to produce conducting polymer such as polyaniline (PAni) with moderate conductivity, magnetic and dielectric properties that could enhance its microwave absorbing and shielding properties. In this communication, novel PAni/HA/TiO₂/Fe₃O₄ nanomaterials with different Fe₃O₄ contents were prepared by template‐free method by using TiO₂ and Fe₃O₄ nanoparticles as dielectric filler and magnetic filler, respectively. Before addition of ammonium peroxydisulfate (APS) for polymerization, Fe₃O₄ aqueous solution was treated with FeCl₃6H₂O in order to disperse well the Fe₃O₄ in the mixture. The result shows that better dispersion of Fe₃O₄ in the mixture by FeCl₃6H₂O treatment could significantly improve the conductivity of the nanocomposites and also activate the formation of nanorods/tubes. Moreover, PAni/HA/TiO₂/Fe₃O₄ nanocomposites treated with FeCl₃6H₂O show better microwave absorption (99.950–99.999% absorption) compared with PAni/HA/TiO₂/Fe₃O₄ micro/nanocomposites (67.0− 99.4% absorption) without treatment in frequency range of 10–13 GHz. Among the prepared PAni/HA/TiO₂/Fe₃O₄ micro/nanocomposites and nanocomposites, PAni/HA/TiO₂/Fe₃O₄ nanocomposite (treated with FeCl₃6H₂O) with 40% Fe₃O₄ exhibit the best microwave absorption (99.999% absorption at 10 GHz) because of its high conductivity, high heterogeneity and moderate magnetization. POLYM. COMPOS., 2010. © 2010 Society of Plastics Engineers